Mercurial > dropbear
comparison debian/README.runit @ 391:00fcf5045160
propagate from branch 'au.asn.ucc.matt.ltc.dropbear' (head c1db4398d56c56c6d06ae1e20c1e0d04dbb598ed)
to branch 'au.asn.ucc.matt.dropbear' (head d26d5eb2837f46b56a33fb0e7573aa0201abd4d5)
| author | Matt Johnston <matt@ucc.asn.au> |
|---|---|
| date | Thu, 11 Jan 2007 04:29:08 +0000 |
| parents | b0316ce64e4b |
| children | 8c2d2edadf2a |
comparison
equal
deleted
inserted
replaced
| 390:d8e44bef7917 | 391:00fcf5045160 |
|---|---|
| 1 Using the dropbear SSH server with runit's services supervision | |
| 2 --------------------------------------------------------------- | |
| 3 | |
| 4 The dropbear SSH server is perfectly suited to be run under runit's | |
| 5 service supervision, and this package already has prepared an adequate | |
| 6 service directory. Follow these steps to enable the dropbear service | |
| 7 using the runit package. | |
| 8 | |
| 9 If not yet installed on your system, install the runit package, and make | |
| 10 sure its service supervision is enabled (it's by default) | |
| 11 | |
| 12 # apt-get install runit | |
| 13 | |
| 14 Make sure the dropbear service normally handled through the sysv init | |
| 15 script is stopped | |
| 16 | |
| 17 # /etc/init.d/dropbear stop | |
| 18 | |
| 19 Create the system user ``dropbearlog'' which will run the logger service, | |
| 20 and own the logs | |
| 21 | |
| 22 # adduser --system --home /var/log/dropbear --no-create-home dropbearlog | |
| 23 | |
| 24 Create the log directory and make the newly created system user the owner | |
| 25 of this directory | |
| 26 | |
| 27 # mkdir -p /var/log/dropbear && chown dropbearlog /var/log/dropbear | |
| 28 | |
| 29 Optionally adjust the configuration of the dropbear service by editing the | |
| 30 run script | |
| 31 | |
| 32 # vi /etc/dropbear/run | |
| 33 | |
| 34 Finally enable the service by linking dropbear's service directory to | |
| 35 /var/service/. The service will be started within five seconds, and | |
| 36 automatically at boot time. The sysv init script is disabled; see the | |
| 37 runsvctrl(8) program for information on how to control services handled by | |
| 38 runit. See the svlogd(8) program on how to configure the log service. | |
| 39 | |
| 40 # ln -s /etc/dropbear /var/service/ | |
| 41 | |
| 42 Optionally check the status of the service a few seconds later | |
| 43 | |
| 44 # runsvstat -l /var/service/dropbear | |
| 45 | |
| 46 -- Gerrit Pape <[email protected]>, Sun, 16 May 2004 15:52:34 +0000 |