--- a/sysoptions.h	Mon May 02 23:48:16 2016 +0200
+++ b/sysoptions.h	Wed May 04 15:33:40 2016 +0200
@@ -23,14 +23,20 @@
 #define AUTH_TIMEOUT 300 /* we choose 5 minutes */
 #endif
 
+ #define DROPBEAR_SVR_PUBKEY_OPTIONS_BUILT ((DROPBEAR_SVR_PUBKEY_AUTH) && (DROPBEAR_SVR_PUBKEY_OPTIONS))
+
 /* A client should try and send an initial key exchange packet guessing
  * the algorithm that will match - saves a round trip connecting, has little
  * overhead if the guess was "wrong". */
-#define USE_KEX_FIRST_FOLLOWS
+#ifndef DROPBEAR_KEX_FIRST_FOLLOWS
+#define DROPBEAR_KEX_FIRST_FOLLOWS 1
+#endif
 /* Use protocol extension to allow "first follows" to succeed more frequently.
  * This is currently Dropbear-specific but will gracefully fallback when connecting
  * to other implementations. */
-#define USE_KEXGUESS2
+#ifndef DROPBEAR_KEXGUESS2
+#define DROPBEAR_KEXGUESS2 1
+#endif
 
 /* Minimum key sizes for DSS and RSA */
 #ifndef MIN_DSS_KEYLEN
@@ -68,11 +74,11 @@
 /* success/failure defines */
 #define DROPBEAR_SUCCESS 0
 #define DROPBEAR_FAILURE -1
+ 
+#define DROPBEAR_PASSWORD_ENV "DROPBEAR_PASSWORD"
 
 /* Required for pubkey auth */
-#if defined(ENABLE_SVR_PUBKEY_AUTH) || defined(DROPBEAR_CLIENT)
-#define DROPBEAR_SIGNKEY_VERIFY
-#endif
+#define DROPBEAR_SIGNKEY_VERIFY ((DROPBEAR_SVR_PUBKEY_AUTH) || (DROPBEAR_CLIENT))
 
 #define SHA1_HASH_SIZE 20
 #define MD5_HASH_SIZE 16
@@ -81,59 +87,45 @@
 #define MAX_KEY_LEN 32 /* 256 bits for aes256 etc */
 #define MAX_IV_LEN 20 /* must be same as max blocksize,  */
 
-#if defined(DROPBEAR_SHA2_512_HMAC)
+#if DROPBEAR_SHA2_512_HMAC
 #define MAX_MAC_LEN 64
-#elif defined(DROPBEAR_SHA2_256_HMAC)
+#elif DROPBEAR_SHA2_256_HMAC
 #define MAX_MAC_LEN 32
 #else
 #define MAX_MAC_LEN 20
 #endif
 
-#if defined(DROPBEAR_ECDH) || defined (DROPBEAR_ECDSA)
-#define DROPBEAR_ECC
+
+#define DROPBEAR_ECC ((DROPBEAR_ECDH) || (DROPBEAR_ECDSA))
+
 /* Debian doesn't define this in system headers */
-#ifndef LTM_DESC
-#define LTM_DESC
-#endif
+#if !defined(LTM_DESC) && (DROPBEAR_ECC)
+#define LTM_DESC 
 #endif
 
-#ifdef DROPBEAR_ECC
-#define DROPBEAR_ECC_256
-#define DROPBEAR_ECC_384
-#define DROPBEAR_ECC_521
-#endif
+#define DROPBEAR_ECC_256 (DROPBEAR_ECC)
+#define DROPBEAR_ECC_384 (DROPBEAR_ECC)
+#define DROPBEAR_ECC_521 (DROPBEAR_ECC)
 
-#ifdef DROPBEAR_ECC
-#define DROPBEAR_LTC_PRNG
-#endif
+#define DROPBEAR_LTC_PRNG (DROPBEAR_ECC)
 
 /* RSA can be vulnerable to timing attacks which use the time required for
  * signing to guess the private key. Blinding avoids this attack, though makes
  * signing operations slightly slower. */
-#define RSA_BLINDING
+#define DROPBEAR_RSA_BLINDING 1
 
 /* hashes which will be linked and registered */
-#if defined(DROPBEAR_SHA2_256_HMAC) || defined(DROPBEAR_ECC_256) || defined(DROPBEAR_CURVE25519) || DROPBEAR_DH_GROUP14_SHA256
-#define DROPBEAR_SHA256
-#endif
-#if defined(DROPBEAR_ECC_384)
-#define DROPBEAR_SHA384
-#endif
+#define DROPBEAR_SHA256 ((DROPBEAR_SHA2_256_HMAC) || (DROPBEAR_ECC_256)  \
+ 			|| (DROPBEAR_CURVE25519) || (DROPBEAR_DH_GROUP14_SHA256))
+#define DROPBEAR_SHA384 (DROPBEAR_ECC_384)
 /* LTC SHA384 depends on SHA512 */
-#if defined(DROPBEAR_SHA2_512_HMAC) || defined(DROPBEAR_ECC_521) || defined(DROPBEAR_ECC_384) || DROPBEAR_DH_GROUP16
-#define DROPBEAR_SHA512
-#endif
-#if defined(DROPBEAR_MD5_HMAC)
-#define DROPBEAR_MD5
-#endif
+#define DROPBEAR_SHA512 ((DROPBEAR_SHA2_512_HMAC) || (DROPBEAR_ECC_521) \
+			|| (DROPBEAR_SHA384) || (DROPBEAR_DH_GROUP16))
+#define DROPBEAR_MD5 (DROPBEAR_MD5_HMAC)
 
- #if DROPBEAR_DH_GROUP14_SHA256 || DROPBEAR_DH_GROUP14_SHA1
- #define DROPBEAR_DH_GROUP14 1
- #endif
+#define DROPBEAR_DH_GROUP14 ((DROPBEAR_DH_GROUP14_SHA256) || (DROPBEAR_DH_GROUP14_SHA1))
 
-#if DROPBEAR_DH_GROUP1 || DROPBEAR_DH_GROUP14 || DROPBEAR_DH_GROUP16
-#define DROPBEAR_NORMAL_DH 1
-#endif
+#define DROPBEAR_NORMAL_DH ((DROPBEAR_DH_GROUP1) || (DROPBEAR_DH_GROUP14) || (DROPBEAR_DH_GROUP16))
 
 /* roughly 2x 521 bits */
 #define MAX_ECC_SIZE 140
@@ -185,65 +177,47 @@
 												auth */
 
 
-#if defined(DROPBEAR_AES256) || defined(DROPBEAR_AES128)
-#define DROPBEAR_AES
-#endif
+#define DROPBEAR_AES ((DROPBEAR_AES256) || (DROPBEAR_AES128))
 
-#if defined(DROPBEAR_TWOFISH256) || defined(DROPBEAR_TWOFISH128)
-#define DROPBEAR_TWOFISH
-#endif
+#define DROPBEAR_TWOFISH ((DROPBEAR_TWOFISH256) || (DROPBEAR_TWOFISH128))
 
-#ifndef ENABLE_X11FWD
-#define DISABLE_X11FWD
-#endif
+#define DROPBEAR_CLI_ANYTCPFWD ((DROPBEAR_CLI_REMOTETCPFWD) || (DROPBEAR_CLI_LOCALTCPFWD))
 
-#if defined(ENABLE_CLI_REMOTETCPFWD) || defined(ENABLE_CLI_LOCALTCPFWD)
-#define ENABLE_CLI_ANYTCPFWD 
-#endif
+#define DROPBEAR_TCP_ACCEPT ((DROPBEAR_CLI_LOCALTCPFWD) || (DROPBEAR_SVR_REMOTETCPFWD))
 
-#if defined(ENABLE_CLI_LOCALTCPFWD) || defined(ENABLE_SVR_REMOTETCPFWD)
-#define DROPBEAR_TCP_ACCEPT
-#endif
-
-#if defined(ENABLE_CLI_REMOTETCPFWD) || defined(ENABLE_CLI_LOCALTCPFWD) || \
-	defined(ENABLE_SVR_REMOTETCPFWD) || defined(ENABLE_SVR_LOCALTCPFWD) || \
-	defined(ENABLE_SVR_AGENTFWD) || defined(ENABLE_X11FWD)
-#define USING_LISTENERS
-#endif
+#define DROPBEAR_LISTENERS \
+   ((DROPBEAR_CLI_REMOTETCPFWD) || (DROPBEAR_CLI_LOCALTCPFWD) || \
+	(DROPBEAR_SVR_REMOTETCPFWD) || (DROPBEAR_SVR_LOCALTCPFWD) || \
+	(DROPBEAR_SVR_AGENTFWD) || (DROPBEAR_X11FWD))
 
-#if defined(ENABLE_CLI_NETCAT) && defined(ENABLE_CLI_PROXYCMD)
-#define ENABLE_CLI_MULTIHOP
-#endif
+#define DROPBEAR_CLI_MULTIHOP ((DROPBEAR_CLI_NETCAT) && (DROPBEAR_CLI_PROXYCMD))
 
-#if defined(ENABLE_CLI_AGENTFWD) || defined(DROPBEAR_PRNGD_SOCKET)
-#define ENABLE_CONNECT_UNIX
-#endif
+#define ENABLE_CONNECT_UNIX ((DROPBEAR_CLI_AGENTFWD) || (DROPBEAR_PRNGD_SOCKET))
 
-#if defined(DROPBEAR_CLIENT) || defined(ENABLE_SVR_PUBKEY_AUTH)
-#define DROPBEAR_KEY_LINES /* ie we're using authorized_keys or known_hosts */
-#endif
+/* if we're using authorized_keys or known_hosts */ 
+#define DROPBEAR_KEY_LINES ((DROPBEAR_CLIENT) || (DROPBEAR_SVR_PUBKEY_AUTH))
 
 /* Changing this is inadvisable, it appears to have problems
  * with flushing compressed data */
 #define DROPBEAR_ZLIB_MEM_LEVEL 8
 
-#if defined(ENABLE_SVR_PASSWORD_AUTH) && defined(ENABLE_SVR_PAM_AUTH)
+#if (DROPBEAR_SVR_PASSWORD_AUTH) && (DROPBEAR_SVR_PAM_AUTH)
 #error "You can't turn on PASSWORD and PAM auth both at once. Fix it in options.h"
 #endif
 
 /* We use dropbear_client and dropbear_server as shortcuts to avoid redundant
  * code, if we're just compiling as client or server */
-#if defined(DROPBEAR_SERVER) && defined(DROPBEAR_CLIENT)
+#if (DROPBEAR_SERVER) && (DROPBEAR_CLIENT)
 
 #define IS_DROPBEAR_SERVER (ses.isserver == 1)
 #define IS_DROPBEAR_CLIENT (ses.isserver == 0)
 
-#elif defined(DROPBEAR_SERVER)
+#elif DROPBEAR_SERVER
 
 #define IS_DROPBEAR_SERVER 1
 #define IS_DROPBEAR_CLIENT 0
 
-#elif defined(DROPBEAR_CLIENT)
+#elif DROPBEAR_CLIENT
 
 #define IS_DROPBEAR_SERVER 0
 #define IS_DROPBEAR_CLIENT 1
@@ -255,9 +229,11 @@
 
 #endif /* neither DROPBEAR_SERVER nor DROPBEAR_CLIENT */
 
-#ifndef HAVE_FORK
-#define USE_VFORK
-#endif  /* don't HAVE_FORK */
+#ifdef HAVE_FORK
+#define DROPBEAR_VFORK 0
+#else
+#define DROPBEAR_VFORK 1
+#endif
 
 #if MAX_UNAUTH_CLIENTS > MAX_CHANNELS
 #define DROPBEAR_LISTEN_BACKLOG MAX_UNAUTH_CLIENTS
@@ -265,8 +241,12 @@
 #define DROPBEAR_LISTEN_BACKLOG MAX_CHANNELS
 #endif
 
+#ifndef DROPBEAR_NONE_CIPHER
+#define DROPBEAR_NONE_CIPHER 0
+#endif
+
 /* free memory before exiting */
-#define DROPBEAR_CLEANUP
+#define DROPBEAR_CLEANUP 1
 
 /* Use this string since some implementations might special-case it */
 #define DROPBEAR_KEEPALIVE_STRING "[email protected]"
@@ -275,8 +255,11 @@
  * Currently server is enabled but client is disabled by default until there
  * is further compatibility testing */
 #ifdef __linux__
-#define DROPBEAR_SERVER_TCP_FAST_OPEN
-/* #define DROPBEAR_CLIENT_TCP_FAST_OPEN */
+#define DROPBEAR_SERVER_TCP_FAST_OPEN 1
+#define DROPBEAR_CLIENT_TCP_FAST_OPEN 0
+#else
+#define DROPBEAR_SERVER_TCP_FAST_OPEN 0
+#define DROPBEAR_CLIENT_TCP_FAST_OPEN 0
 #endif
 
 /* no include guard for this file */