# This Makefile is for Dropbear SSH Server and Client
# @configure_input@

# invocation:
# make PROGRAMS="dropbear dbclient scp" MULTI=1 SCPPROGRESS=1
#
# to make a multiple-program binary "dropbearmulti".
# This example will include dropbear, scp, dropbearkey, dropbearconvert, and
# dbclient functionality, and includes the progress-bar functionality in scp.

ifndef PROGRAMS
	PROGRAMS=dropbear dbclient dropbearkey dropbearconvert
endif

STATIC_LTC=libtomcrypt/libtomcrypt.a
STATIC_LTM=libtommath/libtommath.a

LIBTOM_LIBS=@LIBTOM_LIBS@

ifeq (@BUNDLED_LIBTOM@, 1)
LIBTOM_DEPS=$(STATIC_LTC) $(STATIC_LTM) 
LIBTOM_CLEAN=ltc-clean ltm-clean
CFLAGS+=-I$(srcdir)/libtomcrypt/src/headers/
LIBTOM_LIBS=$(STATIC_LTC) $(STATIC_LTM)
endif

OPTION_HEADERS = default_options_guard.h sysoptions.h
ifneq ($(wildcard localoptions.h),)
CFLAGS+=-DLOCALOPTIONS_H_EXISTS
OPTION_HEADERS += localoptions.h
endif

COMMONOBJS=dbutil.o buffer.o dbhelpers.o \
		dss.o bignum.o \
		signkey.o rsa.o dbrandom.o \
		queue.o \
		atomicio.o compat.o fake-rfc2553.o \
		ltc_prng.o ecc.o ecdsa.o crypto_desc.o \
		dbmalloc.o \
		gensignkey.o gendss.o genrsa.o

SVROBJS=svr-kex.o svr-auth.o sshpty.o \
		svr-authpasswd.o svr-authpubkey.o svr-authpubkeyoptions.o svr-session.o svr-service.o \
		svr-chansession.o svr-runopts.o svr-agentfwd.o svr-main.o svr-x11fwd.o\
		svr-tcpfwd.o svr-authpam.o

CLIOBJS=cli-main.o cli-auth.o cli-authpasswd.o cli-kex.o \
		cli-session.o cli-runopts.o cli-chansession.o \
		cli-authpubkey.o cli-tcpfwd.o cli-channel.o cli-authinteract.o \
		cli-agentfwd.o 

CLISVROBJS=common-session.o packet.o common-algo.o common-kex.o \
			common-channel.o common-chansession.o termcodes.o loginrec.o \
			tcp-accept.o listener.o process-packet.o dh_groups.o \
			common-runopts.o circbuffer.o curve25519-donna.o list.o netio.o

KEYOBJS=dropbearkey.o

CONVERTOBJS=dropbearconvert.o keyimport.o

SCPOBJS=scp.o progressmeter.o atomicio.o scpmisc.o compat.o

ifeq (@DROPBEAR_FUZZ@, 1)
	allobjs = $(COMMONOBJS) fuzz-common.o  fuzz-wrapfd.o $(CLISVROBJS) $(CLIOBJS) $(SVROBJS) @CRYPTLIB@
	allobjs:=$(subst svr-main.o, ,$(allobjs))
	allobjs:=$(subst cli-main.o, ,$(allobjs))
	allobjs:=$(sort $(allobjs))

	dropbearobjs=$(allobjs) svr-main.o
	dbclientobjs=$(allobjs) cli-main.o
	dropbearkeyobjs=$(allobjs) $(KEYOBJS)
	dropbearconvertobjs=$(allobjs) $(CONVERTOBJS)
	# CXX only set when fuzzing
	CXX=@CXX@
else
	dropbearobjs=$(COMMONOBJS) $(CLISVROBJS) $(SVROBJS)
	dbclientobjs=$(COMMONOBJS) $(CLISVROBJS) $(CLIOBJS)
	dropbearkeyobjs=$(COMMONOBJS) $(KEYOBJS)
	dropbearconvertobjs=$(COMMONOBJS) $(CONVERTOBJS)
	scpobjs=$(SCPOBJS)
endif

VPATH=@srcdir@
srcdir=@srcdir@

prefix=@prefix@
exec_prefix=@exec_prefix@
datarootdir = @datarootdir@
bindir=@bindir@
sbindir=@sbindir@
mandir=@mandir@

.DELETE_ON_ERROR:

CC=@CC@
AR=@AR@
RANLIB=@RANLIB@
STRIP=@STRIP@
INSTALL=@INSTALL@
CPPFLAGS=@CPPFLAGS@
CFLAGS+=-I. -I$(srcdir) $(CPPFLAGS) @CFLAGS@
LIBS+=@LIBS@
LDFLAGS=@LDFLAGS@

EXEEXT=@EXEEXT@

STATIC=@STATIC@

# whether we're building client, server, or both for the common objects.
# evilness so we detect 'dropbear' by itself as a word
ifneq (,$(strip $(foreach prog, $(PROGRAMS), $(findstring ZdropbearZ, Z$(prog)Z))))
	CFLAGS+= -DDROPBEAR_SERVER
endif
ifneq (,$(strip $(foreach prog, $(PROGRAMS), $(findstring ZdbclientZ, Z$(prog)Z))))
	CFLAGS+= -DDROPBEAR_CLIENT
endif

# these are exported so that libtomcrypt's makefile will use them
export CC
export CFLAGS
export RANLIB AR STRIP

ifeq ($(STATIC), 1)
	LDFLAGS+=-static
endif

ifeq ($(MULTI), 1)
	TARGETS=dropbearmulti$(EXEEXT)
else
	TARGETS=$(PROGRAMS)
endif

# for the scp progress meter. The -D doesn't affect anything else.
ifeq ($(SCPPROGRESS), 1)
	CFLAGS+=-DPROGRESS_METER
endif

all: $(TARGETS)

# for simplicity assume all source depends on all headers
HEADERS=$(wildcard $(srcdir)/*.h *.h) $(OPTION_HEADERS)
%.o : %.c $(HEADERS)
	$(CC) -c $(CFLAGS) $(CPPFLAGS) $< -o $@

default_options_guard.h: default_options.h
	@echo Creating $@
	@printf "/*\n > > > Do not edit this file (default_options_guard.h) < < <\nGenerated from "$^"\nLocal customisation goes in localoptions.h\n*/\n\n" > $@.tmp
	@$(srcdir)/ifndef_wrapper.sh < $^ >> $@.tmp
	@mv $@.tmp $@

strip: $(TARGETS)
	$(STRIP) $(addsuffix $(EXEEXT), $(TARGETS))

install: $(addprefix inst_, $(TARGETS))

insmultidropbear: dropbearmulti$(EXEEXT)
	$(INSTALL) -d $(DESTDIR)$(sbindir)
	-rm -f $(DESTDIR)$(sbindir)/dropbear$(EXEEXT)
	-ln -s $(bindir)/dropbearmulti$(EXEEXT) $(DESTDIR)$(sbindir)/dropbear$(EXEEXT) 
	$(INSTALL) -d $(DESTDIR)$(mandir)/man8
	$(INSTALL) -m 644 $(srcdir)/dropbear.8  $(DESTDIR)$(mandir)/man8/dropbear.8

insmulti%: dropbearmulti$(EXEEXT)
	$(INSTALL) -d $(DESTDIR)$(bindir)
	-rm -f $(DESTDIR)$(bindir)/$*$(EXEEXT) 
	-ln -s $(bindir)/dropbearmulti$(EXEEXT) $(DESTDIR)$(bindir)/$*$(EXEEXT) 
	$(INSTALL) -d $(DESTDIR)$(mandir)/man1
	if test -e $*.1; then $(INSTALL) -m 644 $*.1 $(DESTDIR)$(mandir)/man1/$*.1; fi

# dropbear should go in sbin, so it needs a separate rule
inst_dropbear: dropbear
	$(INSTALL) -d $(DESTDIR)$(sbindir)
	$(INSTALL) dropbear$(EXEEXT) $(DESTDIR)$(sbindir)
	$(INSTALL) -d $(DESTDIR)$(mandir)/man8
	$(INSTALL) -m 644 $(srcdir)/dropbear.8 $(DESTDIR)$(mandir)/man8/dropbear.8

inst_%: %
	$(INSTALL) -d $(DESTDIR)$(bindir)
	$(INSTALL) $*$(EXEEXT) $(DESTDIR)$(bindir)
	$(INSTALL) -d $(DESTDIR)$(mandir)/man1
	if test -e $*.1; then $(INSTALL) -m 644 $*.1 $(DESTDIR)$(mandir)/man1/$*.1; fi

inst_dropbearmulti: $(addprefix insmulti, $(PROGRAMS)) 

# for some reason the rule further down doesn't like $($@objs) as a prereq.
dropbear: $(dropbearobjs)
dbclient: $(dbclientobjs)
dropbearkey: $(dropbearkeyobjs)
dropbearconvert: $(dropbearconvertobjs)

dropbear: $(HEADERS) $(LIBTOM_DEPS) Makefile
	$(CC) $(LDFLAGS) -o $@$(EXEEXT) $($@objs) $(LIBTOM_LIBS) $(LIBS) @CRYPTLIB@

dbclient: $(HEADERS) $(LIBTOM_DEPS) Makefile
	$(CC) $(LDFLAGS) -o $@$(EXEEXT) $($@objs) $(LIBTOM_LIBS) $(LIBS)

dropbearkey dropbearconvert: $(HEADERS) $(LIBTOM_DEPS) Makefile
	$(CC) $(LDFLAGS) -o $@$(EXEEXT) $($@objs) $(LIBTOM_LIBS) $(LIBS)

# scp doesn't use the libs so is special.
scp: $(SCPOBJS)  $(HEADERS) Makefile
	$(CC) $(LDFLAGS) -o $@$(EXEEXT) $(SCPOBJS)


# multi-binary compilation.
MULTIOBJS=
ifeq ($(MULTI),1)
	MULTIOBJS=dbmulti.o $(sort $(foreach prog, $(PROGRAMS), $($(prog)objs)))
	CFLAGS+=$(addprefix -DDBMULTI_, $(PROGRAMS)) -DDROPBEAR_MULTI
endif

dropbearmulti$(EXEEXT): $(HEADERS) $(MULTIOBJS) $(LIBTOM_DEPS) Makefile
	$(CC) $(LDFLAGS) -o $@ $(MULTIOBJS) $(LIBTOM_LIBS) $(LIBS) @CRYPTLIB@

multibinary: dropbearmulti$(EXEEXT)

multilink: multibinary $(addprefix link, $(PROGRAMS))

link%:
	-rm -f $*$(EXEEXT)
	-ln -s dropbearmulti$(EXEEXT) $*$(EXEEXT)

$(STATIC_LTC): $(OPTION_HEADERS)
	$(MAKE) -C libtomcrypt

$(STATIC_LTM): $(OPTION_HEADERS)
	$(MAKE) -C libtommath

.PHONY : clean sizes thisclean distclean tidy ltc-clean ltm-clean

ltc-clean:
	$(MAKE) -C libtomcrypt clean

ltm-clean:
	$(MAKE) -C libtommath clean

sizes: dropbear
	objdump -t dropbear|grep ".text"|cut -d "." -f 2|sort -rn

clean: $(LIBTOM_CLEAN) thisclean

thisclean:
	-rm -f dropbear$(EXEEXT) dbclient$(EXEEXT) dropbearkey$(EXEEXT) \
			dropbearconvert$(EXEEXT) scp$(EXEEXT) scp-progress$(EXEEXT) \
			dropbearmulti$(EXEEXT) *.o *.da *.bb *.bbg *.prof

distclean: clean tidy
	-rm -f config.h
	-rm -f Makefile
	-rm -f default_options_guard.h

tidy:
	-rm -f *~ *.gcov */*~

## Fuzzing targets

# list of fuzz targets
FUZZ_TARGETS=fuzzer-preauth fuzzer-pubkey fuzzer-verify fuzzer-preauth_nomaths fuzzer-kexdh fuzzer-kexecdh

FUZZER_OPTIONS = $(addsuffix .options, $(FUZZ_TARGETS))

list-fuzz-targets:
	@echo $(FUZZ_TARGETS)

# fuzzers that don't use libfuzzer, just a standalone harness that feeds inputs
fuzzstandalone: FUZZLIB=fuzz-harness.o
fuzzstandalone: fuzz-harness.o fuzz-targets

# exclude svr-main.o to avoid duplicate main
svrfuzzobjs=$(subst svr-main.o, ,$(dropbearobjs))

# build all the fuzzers. This will require fail to link unless built with
# make fuzz-targets FUZZLIB=-lFuzzer.a 
# or similar - the library provides main().
fuzz-targets: $(FUZZ_TARGETS) $(FUZZER_OPTIONS)

fuzzer-preauth: fuzzer-preauth.o $(HEADERS) $(LIBTOM_DEPS) Makefile $(svrfuzzobjs)
	$(CXX) $(CXXFLAGS) $@.o $(LDFLAGS) $(svrfuzzobjs) -o $@$(EXEEXT) $(LIBTOM_LIBS) $(LIBS) $(FUZZLIB) @CRYPTLIB@

fuzzer-preauth_nomaths: fuzzer-preauth_nomaths.o $(HEADERS) $(LIBTOM_DEPS) Makefile $(svrfuzzobjs)
	$(CXX) $(CXXFLAGS) $@.o $(LDFLAGS) $(svrfuzzobjs) -o $@$(EXEEXT) $(LIBTOM_LIBS) $(LIBS) $(FUZZLIB) @CRYPTLIB@

fuzzer-pubkey: fuzzer-pubkey.o $(HEADERS) $(LIBTOM_DEPS) Makefile $(svrfuzzobjs)
	$(CXX) $(CXXFLAGS) $@.o $(LDFLAGS) $(svrfuzzobjs) -o $@$(EXEEXT) $(LIBTOM_LIBS) $(LIBS) $(FUZZLIB) @CRYPTLIB@

fuzzer-verify: fuzzer-verify.o $(HEADERS) $(LIBTOM_DEPS) Makefile $(svrfuzzobjs)
	$(CXX) $(CXXFLAGS) $@.o $(LDFLAGS) $(svrfuzzobjs) -o $@$(EXEEXT) $(LIBTOM_LIBS) $(LIBS) $(FUZZLIB) @CRYPTLIB@

fuzzer-kexdh: fuzzer-kexdh.o $(HEADERS) $(LIBTOM_DEPS) Makefile $(svrfuzzobjs)
	$(CXX) $(CXXFLAGS) $@.o $(LDFLAGS) $(svrfuzzobjs) -o $@$(EXEEXT) $(LIBTOM_LIBS) $(LIBS) $(FUZZLIB) @CRYPTLIB@

fuzzer-kexecdh: fuzzer-kexecdh.o $(HEADERS) $(LIBTOM_DEPS) Makefile $(svrfuzzobjs)
	$(CXX) $(CXXFLAGS) $@.o $(LDFLAGS) $(svrfuzzobjs) -o $@$(EXEEXT) $(LIBTOM_LIBS) $(LIBS) $(FUZZLIB) @CRYPTLIB@

fuzzer-%.options: Makefile
	echo "[libfuzzer]"               > $@
	echo "max_len = 50000"          >> $@

# run this to update hardcoded hostkeys for for fuzzing. 
# hostkeys.c is checked in to hg.
fuzz-hostkeys:
	dropbearkey -t rsa -f keyr
	dropbearkey -t dss -f keyd
	dropbearkey -t ecdsa -size 256 -f keye
	echo > hostkeys.c
	/usr/bin/xxd -i -a keyr >> hostkeys.c
	/usr/bin/xxd -i -a keye >> hostkeys.c
	/usr/bin/xxd -i -a keyd >> hostkeys.c