view cli-tcpfwd.c @ 994:5c5ade336926

Prefer stronger algorithms in algorithm negotiation. Prefer diffie-hellman-group14-sha1 (2048 bit) over diffie-hellman-group1-sha1 (1024 bit). Due to meet-in-the-middle attacks the effective key length of three key 3DES is 112 bits. AES is stronger and faster then 3DES. Prefer to delay the start of compression until after authentication has completed. This avoids exposing compression code to attacks from unauthenticated users. (github pull request #9)
author Fedor Brunner <fedor.brunner@azet.sk>
date Fri, 23 Jan 2015 23:00:25 +0800
parents 5daedffd0769
children 4121ca987e6a
line wrap: on
line source

/*
 * Dropbear SSH
 * 
 * Copyright (c) 2002,2003 Matt Johnston
 * All rights reserved.
 * 
 * Permission is hereby granted, free of charge, to any person obtaining a copy
 * of this software and associated documentation files (the "Software"), to deal
 * in the Software without restriction, including without limitation the rights
 * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
 * copies of the Software, and to permit persons to whom the Software is
 * furnished to do so, subject to the following conditions:
 * 
 * The above copyright notice and this permission notice shall be included in
 * all copies or substantial portions of the Software.
 * 
 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
 * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
 * SOFTWARE. */

#include "includes.h"
#include "options.h"
#include "dbutil.h"
#include "tcpfwd.h"
#include "channel.h"
#include "runopts.h"
#include "session.h"
#include "ssh.h"

#ifdef ENABLE_CLI_REMOTETCPFWD
static int newtcpforwarded(struct Channel * channel);

const struct ChanType cli_chan_tcpremote = {
	1, /* sepfds */
	"forwarded-tcpip",
	newtcpforwarded,
	NULL,
	NULL,
	NULL
};
#endif

#ifdef ENABLE_CLI_LOCALTCPFWD
static int cli_localtcp(const char* listenaddr, 
		unsigned int listenport, 
		const char* remoteaddr,
		unsigned int remoteport);
static const struct ChanType cli_chan_tcplocal = {
	1, /* sepfds */
	"direct-tcpip",
	tcp_prio_inithandler,
	NULL,
	NULL,
	NULL
};
#endif

#ifdef ENABLE_CLI_LOCALTCPFWD
void setup_localtcp() {
	m_list_elem *iter;
	int ret;

	TRACE(("enter setup_localtcp"))

	for (iter = cli_opts.localfwds->first; iter; iter = iter->next) {
		struct TCPFwdEntry * fwd = (struct TCPFwdEntry*)iter->item;
		ret = cli_localtcp(
				fwd->listenaddr,
				fwd->listenport,
				fwd->connectaddr,
				fwd->connectport);
		if (ret == DROPBEAR_FAILURE) {
			dropbear_log(LOG_WARNING, "Failed local port forward %s:%d:%s:%d",
					fwd->listenaddr,
					fwd->listenport,
					fwd->connectaddr,
					fwd->connectport);
		}		
	}
	TRACE(("leave setup_localtcp"))

}

static int cli_localtcp(const char* listenaddr, 
		unsigned int listenport, 
		const char* remoteaddr,
		unsigned int remoteport) {

	struct TCPListener* tcpinfo = NULL;
	int ret;

	TRACE(("enter cli_localtcp: %d %s %d", listenport, remoteaddr,
				remoteport));

	tcpinfo = (struct TCPListener*)m_malloc(sizeof(struct TCPListener));

	tcpinfo->sendaddr = m_strdup(remoteaddr);
	tcpinfo->sendport = remoteport;

	if (listenaddr)
	{
		tcpinfo->listenaddr = m_strdup(listenaddr);
	}
	else
	{
		if (opts.listen_fwd_all) {
			tcpinfo->listenaddr = m_strdup("");
		} else {
			tcpinfo->listenaddr = m_strdup("localhost");
		}
	}
	tcpinfo->listenport = listenport;

	tcpinfo->chantype = &cli_chan_tcplocal;
	tcpinfo->tcp_type = direct;

	ret = listen_tcpfwd(tcpinfo);

	if (ret == DROPBEAR_FAILURE) {
		m_free(tcpinfo);
	}
	TRACE(("leave cli_localtcp: %d", ret))
	return ret;
}
#endif /* ENABLE_CLI_LOCALTCPFWD */

#ifdef  ENABLE_CLI_REMOTETCPFWD
static void send_msg_global_request_remotetcp(const char *addr, int port) {

	TRACE(("enter send_msg_global_request_remotetcp"))

	CHECKCLEARTOWRITE();
	buf_putbyte(ses.writepayload, SSH_MSG_GLOBAL_REQUEST);
	buf_putstring(ses.writepayload, "tcpip-forward", 13);
	buf_putbyte(ses.writepayload, 1); /* want_reply */
	buf_putstring(ses.writepayload, addr, strlen(addr));
	buf_putint(ses.writepayload, port);

	encrypt_packet();

	TRACE(("leave send_msg_global_request_remotetcp"))
}

/* The only global success/failure messages are for remotetcp.
 * Since there isn't any identifier in these messages, we have to rely on them
 * being in the same order as we sent the requests. This is the ordering
 * of the cli_opts.remotefwds list.
 * If the requested remote port is 0 the listen port will be
 * dynamically allocated by the server and the port number will be returned
 * to client and the port number reported to the user. */
void cli_recv_msg_request_success() {
	/* We just mark off that we have received the reply,
	 * so that we can report failure for later ones. */
	m_list_elem * iter = NULL;
	for (iter = cli_opts.remotefwds->first; iter; iter = iter->next) {
		struct TCPFwdEntry *fwd = (struct TCPFwdEntry*)iter->item;
		if (!fwd->have_reply) {
			fwd->have_reply = 1;
			if (fwd->listenport == 0) {
				/* The server should let us know which port was allocated if we requested port 0 */
				int allocport = buf_getint(ses.payload);
				if (allocport > 0) {
					fwd->listenport = allocport;
					dropbear_log(LOG_INFO, "Allocated port %d for remote forward to %s:%d", 
							allocport, fwd->connectaddr, fwd->connectport);
				}
			}
			return;
		}
	}
}

void cli_recv_msg_request_failure() {
	m_list_elem *iter;
	for (iter = cli_opts.remotefwds->first; iter; iter = iter->next) {
		struct TCPFwdEntry *fwd = (struct TCPFwdEntry*)iter->item;
		if (!fwd->have_reply) {
			fwd->have_reply = 1;
			dropbear_log(LOG_WARNING, "Remote TCP forward request failed (port %d -> %s:%d)", fwd->listenport, fwd->connectaddr, fwd->connectport);
			return;
		}
	}
}

void setup_remotetcp() {
	m_list_elem *iter;
	TRACE(("enter setup_remotetcp"))

	for (iter = cli_opts.remotefwds->first; iter; iter = iter->next) {
		struct TCPFwdEntry *fwd = (struct TCPFwdEntry*)iter->item;
		if (!fwd->listenaddr)
		{
			/* we store the addresses so that we can compare them
			   when the server sends them back */
			if (opts.listen_fwd_all) {
				fwd->listenaddr = m_strdup("");
			} else {
				fwd->listenaddr = m_strdup("localhost");
			}
		}
		send_msg_global_request_remotetcp(fwd->listenaddr, fwd->listenport);
	}

	TRACE(("leave setup_remotetcp"))
}

static int newtcpforwarded(struct Channel * channel) {

    char *origaddr = NULL;
	unsigned int origport;
	m_list_elem * iter = NULL;
	struct TCPFwdEntry *fwd;
	char portstring[NI_MAXSERV];
	int sock;
	int err = SSH_OPEN_ADMINISTRATIVELY_PROHIBITED;

	origaddr = buf_getstring(ses.payload, NULL);
	origport = buf_getint(ses.payload);

	/* Find which port corresponds. First try and match address as well as port,
	in case they want to forward different ports separately ... */
	for (iter = cli_opts.remotefwds->first; iter; iter = iter->next) {
		fwd = (struct TCPFwdEntry*)iter->item;
		if (origport == fwd->listenport
				&& strcmp(origaddr, fwd->listenaddr) == 0) {
			break;
		}
	}

	if (!iter)
	{
		/* ... otherwise try to generically match the only forwarded port 
		without address (also handles ::1 vs 127.0.0.1 vs localhost case).
		rfc4254 is vague about the definition of "address that was connected" */
		for (iter = cli_opts.remotefwds->first; iter; iter = iter->next) {
			fwd = (struct TCPFwdEntry*)iter->item;
			if (origport == fwd->listenport) {
				break;
			}
		}
	}


	if (iter == NULL) {
		/* We didn't request forwarding on that port */
        	cleantext(origaddr);
		dropbear_log(LOG_INFO, "Server sent unrequested forward from \"%s:%d\"", 
                origaddr, origport);
		goto out;
	}
	
	snprintf(portstring, sizeof(portstring), "%d", fwd->connectport);
	sock = connect_remote(fwd->connectaddr, portstring, 1, NULL);
	if (sock < 0) {
		TRACE(("leave newtcpdirect: sock failed"))
		err = SSH_OPEN_CONNECT_FAILED;
		goto out;
	}

	ses.maxfd = MAX(ses.maxfd, sock);

	/* We don't set readfd, that will get set after the connection's
	 * progress succeeds */
	channel->writefd = sock;
	channel->initconn = 1;

	channel->prio = DROPBEAR_CHANNEL_PRIO_UNKNOWABLE;
	
	err = SSH_OPEN_IN_PROGRESS;

out:
	m_free(origaddr);
	TRACE(("leave newtcpdirect: err %d", err))
	return err;
}
#endif /* ENABLE_CLI_REMOTETCPFWD */