view libtommath/Makefile.in @ 1665:7c17995bcdfb

Improve address logging on early exit messages (#83) Change 'Early exit' and 'Exit before auth' messages to include the IP address & port as part of the message. This allows log scanning utilities such as 'fail2ban' to obtain the offending IP address as part of the failure event instead of extracting the PID from the message and then scanning the log again for match 'child connection from' messages Signed-off-by: Kevin Darbyshire-Bryant <[email protected]>
author Kevin Darbyshire-Bryant <6500011+ldir-EDB0@users.noreply.github.com>
date Wed, 18 Mar 2020 15:28:56 +0000
parents f52919ffd3b1
children 1051e4eea25a
line wrap: on
line source

#Makefile for GCC
#
#Tom St Denis

VPATH=@srcdir@
srcdir=@srcdir@

# So that libtommath can include Dropbear headers for options and m_burn()
CFLAGS += -I$(srcdir) -I../libtomcrypt/src/headers/ -I$(srcdir)/../libtomcrypt/src/headers/ -I../ -I$(srcdir)/../

ifeq ($V,1)
silent=
else
silent=@
endif

#default files to install
ifndef LIBNAME
   LIBNAME=libtommath.a
endif

coverage: LIBNAME:=-Wl,--whole-archive $(LIBNAME)  -Wl,--no-whole-archive

include $(srcdir)/makefile_include.mk

%.o: %.c
ifneq ($V,1)
	@echo "   * ${CC} $@"
endif
	${silent} ${CC} -c ${CFLAGS} $< -o $@

LCOV_ARGS=--directory .

#START_INS
OBJECTS=bn_error.o bn_fast_mp_invmod.o bn_fast_mp_montgomery_reduce.o bn_fast_s_mp_mul_digs.o \
bn_fast_s_mp_mul_high_digs.o bn_fast_s_mp_sqr.o bn_mp_2expt.o bn_mp_abs.o bn_mp_add.o bn_mp_add_d.o \
bn_mp_addmod.o bn_mp_and.o bn_mp_clamp.o bn_mp_clear.o bn_mp_clear_multi.o bn_mp_cmp.o bn_mp_cmp_d.o \
bn_mp_cmp_mag.o bn_mp_cnt_lsb.o bn_mp_complement.o bn_mp_copy.o bn_mp_count_bits.o bn_mp_div.o \
bn_mp_div_2.o bn_mp_div_2d.o bn_mp_div_3.o bn_mp_div_d.o bn_mp_dr_is_modulus.o bn_mp_dr_reduce.o \
bn_mp_dr_setup.o bn_mp_exch.o bn_mp_export.o bn_mp_expt_d.o bn_mp_expt_d_ex.o bn_mp_exptmod.o \
bn_mp_exptmod_fast.o bn_mp_exteuclid.o bn_mp_fread.o bn_mp_fwrite.o bn_mp_gcd.o bn_mp_get_bit.o \
bn_mp_get_int.o bn_mp_get_long.o bn_mp_get_long_long.o bn_mp_grow.o bn_mp_import.o bn_mp_init.o \
bn_mp_init_copy.o bn_mp_init_multi.o bn_mp_init_set.o bn_mp_init_set_int.o bn_mp_init_size.o \
bn_mp_invmod.o bn_mp_invmod_slow.o bn_mp_is_square.o bn_mp_jacobi.o bn_mp_karatsuba_mul.o \
bn_mp_karatsuba_sqr.o bn_mp_kronecker.o bn_mp_lcm.o bn_mp_lshd.o bn_mp_mod.o bn_mp_mod_2d.o bn_mp_mod_d.o \
bn_mp_montgomery_calc_normalization.o bn_mp_montgomery_reduce.o bn_mp_montgomery_setup.o bn_mp_mul.o \
bn_mp_mul_2.o bn_mp_mul_2d.o bn_mp_mul_d.o bn_mp_mulmod.o bn_mp_n_root.o bn_mp_n_root_ex.o bn_mp_neg.o \
bn_mp_or.o bn_mp_prime_fermat.o bn_mp_prime_frobenius_underwood.o bn_mp_prime_is_divisible.o \
bn_mp_prime_is_prime.o bn_mp_prime_miller_rabin.o bn_mp_prime_next_prime.o \
bn_mp_prime_rabin_miller_trials.o bn_mp_prime_random_ex.o bn_mp_prime_strong_lucas_selfridge.o \
bn_mp_radix_size.o bn_mp_radix_smap.o bn_mp_rand.o bn_mp_read_radix.o bn_mp_read_signed_bin.o \
bn_mp_read_unsigned_bin.o bn_mp_reduce.o bn_mp_reduce_2k.o bn_mp_reduce_2k_l.o bn_mp_reduce_2k_setup.o \
bn_mp_reduce_2k_setup_l.o bn_mp_reduce_is_2k.o bn_mp_reduce_is_2k_l.o bn_mp_reduce_setup.o bn_mp_rshd.o \
bn_mp_set.o bn_mp_set_int.o bn_mp_set_long.o bn_mp_set_long_long.o bn_mp_shrink.o bn_mp_signed_bin_size.o \
bn_mp_sqr.o bn_mp_sqrmod.o bn_mp_sqrt.o bn_mp_sqrtmod_prime.o bn_mp_sub.o bn_mp_sub_d.o bn_mp_submod.o \
bn_mp_tc_and.o bn_mp_tc_div_2d.o bn_mp_tc_or.o bn_mp_tc_xor.o bn_mp_to_signed_bin.o \
bn_mp_to_signed_bin_n.o bn_mp_to_unsigned_bin.o bn_mp_to_unsigned_bin_n.o bn_mp_toom_mul.o \
bn_mp_toom_sqr.o bn_mp_toradix.o bn_mp_toradix_n.o bn_mp_unsigned_bin_size.o bn_mp_xor.o bn_mp_zero.o \
bn_prime_tab.o bn_reverse.o bn_s_mp_add.o bn_s_mp_exptmod.o bn_s_mp_mul_digs.o bn_s_mp_mul_high_digs.o \
bn_s_mp_sqr.o bn_s_mp_sub.o bncore.o

#END_INS

$(OBJECTS): $(HEADERS)

$(LIBNAME):  $(OBJECTS)
	$(AR) $(ARFLAGS) $@ $(OBJECTS)
	$(RANLIB) $@

#make a profiled library (takes a while!!!)
#
# This will build the library with profile generation
# then run the test demo and rebuild the library.
#
# So far I've seen improvements in the MP math
profiled:
	make CFLAGS="$(CFLAGS) -fprofile-arcs -DTESTING" timing
	./timing
	rm -f *.a *.o timing
	make CFLAGS="$(CFLAGS) -fbranch-probabilities"

#make a single object profiled library
profiled_single:
	perl gen.pl
	$(CC) $(CFLAGS) -fprofile-arcs -DTESTING -c mpi.c -o mpi.o
	$(CC) $(CFLAGS) -DTESTING -DTIMER demo/timing.c mpi.o -lgcov -o timing
	./timing
	rm -f *.o timing
	$(CC) $(CFLAGS) -fbranch-probabilities -DTESTING -c mpi.c -o mpi.o
	$(AR) $(ARFLAGS) $(LIBNAME) mpi.o
	ranlib $(LIBNAME)

install: $(LIBNAME)
	install -d $(DESTDIR)$(LIBPATH)
	install -d $(DESTDIR)$(INCPATH)
	install -m 644 $(LIBNAME) $(DESTDIR)$(LIBPATH)
	install -m 644 $(HEADERS_PUB) $(DESTDIR)$(INCPATH)

uninstall:
	rm $(DESTDIR)$(LIBPATH)/$(LIBNAME)
	rm $(HEADERS_PUB:%=$(DESTDIR)$(INCPATH)/%)

test: $(LIBNAME) demo/demo.o
	$(CC) $(CFLAGS) demo/demo.o $(LIBNAME) $(LFLAGS) -o test

test_standalone: $(LIBNAME) demo/demo.o
	$(CC) $(CFLAGS) demo/demo.o $(LIBNAME) $(LFLAGS) -o test

.PHONY: mtest
mtest:
	cd mtest ; $(CC) $(CFLAGS) -O0 mtest.c $(LFLAGS) -o mtest

timing: $(LIBNAME) demo/timing.c
	$(CC) $(CFLAGS) -DTIMER demo/timing.c $(LIBNAME) $(LFLAGS) -o timing

# You have to create a file .coveralls.yml with the content "repo_token: <the token>"
# in the base folder to be able to submit to coveralls
coveralls: lcov
	coveralls-lcov

docdvi poster docs mandvi manual:
	$(MAKE) -C doc/ $@ V=$(V)

pretty:
	perl pretty.build

.PHONY: pre_gen
pre_gen:
	mkdir -p pre_gen
	perl gen.pl
	sed -e 's/[[:blank:]]*$$//' mpi.c > pre_gen/mpi.c
	rm mpi.c

zipup: clean astyle new_file manual poster docs
	@# Update the index, so diff-index won't fail in case the pdf has been created.
	@#   As the pdf creation modifies the tex files, git sometimes detects the
	@#   modified files, but misses that it's put back to its original version.
	@git update-index --refresh
	@git diff-index --quiet HEAD -- || ( echo "FAILURE: uncommited changes or not a git" && exit 1 )
	rm -rf libtommath-$(VERSION) ltm-$(VERSION).*
	@# files/dirs excluded from "git archive" are defined in .gitattributes
	git archive --format=tar --prefix=libtommath-$(VERSION)/ HEAD | tar x
	@echo 'fixme check'
	-@(find libtommath-$(VERSION)/ -type f | xargs grep 'FIXM[E]') && echo '############## BEWARE: the "fixme" marker was found !!! ##############' || true
	mkdir -p libtommath-$(VERSION)/doc
	cp doc/bn.pdf doc/tommath.pdf doc/poster.pdf libtommath-$(VERSION)/doc/
	$(MAKE) -C libtommath-$(VERSION)/ pre_gen
	tar -c libtommath-$(VERSION)/ | xz -6e -c - > ltm-$(VERSION).tar.xz
	zip -9rq ltm-$(VERSION).zip libtommath-$(VERSION)
	cp doc/bn.pdf bn-$(VERSION).pdf
	cp doc/tommath.pdf tommath-$(VERSION).pdf
	rm -rf libtommath-$(VERSION)
	gpg -b -a ltm-$(VERSION).tar.xz
	gpg -b -a ltm-$(VERSION).zip

new_file:
	bash updatemakes.sh
	perl dep.pl

perlcritic:
	perlcritic *.pl doc/*.pl

astyle:
	astyle --options=astylerc $(OBJECTS:.o=.c) tommath*.h demo/*.c etc/*.c mtest/mtest.c