Mercurial > dropbear
view CHANGES @ 1191:b370b4b172d0
Fix ses.channel_signal_pending race
author | Matt Johnston <matt@ucc.asn.au> |
---|---|
date | Fri, 27 Nov 2015 21:26:43 +0800 |
parents | 79a6ef02307d |
children | 388e5c3e380e |
line wrap: on
line source
2015.70 - 26 November 2015 - Fix server password authentication on Linux, broke in 2015.69 2015.69 - 25 November 2015 - Fix crash when forwarded TCP connections fail to connect (bug introduced in 2015.68) - Avoid hang on session close when multiple sessions are started, affects Qt Creator Patch from Andrzej Szombierski - Reduce per-channel memory consumption in common case, increase default channel limit from 100 to 1000 which should improve SOCKS forwarding for modern webpages - Handle multiple command line arguments in a single flag, thanks to Guilhem Moulin - Manpage improvements from Guilhem Moulin - Build fixes for Android from Mike Frysinger - Don't display the MOTD when an explicit command is run from Guilhem Moulin - Check curve25519 shared secret isn't zero 2015.68 - Saturday 8 August 2015 - Reduce local data copying for improved efficiency. Measured 30% increase in throughput for connections to localhost - Forwarded TCP ports connect asynchronously and try all available addresses (IPv4, IPv6, round robin DNS) - Fix all compile warnings, many patches from Gaël Portay Note that configure with -Werror may not be successful on some platforms (OS X) and some configuration options may still result in unused variable warnings. - Use TCP Fast Open on Linux if available. Saves a round trip at connection to hosts that have previously been connected. Needs a recent Linux kernel and possibly "sysctl -w net.ipv4.tcp_fastopen=3" Client side is disabled by default pending further compatibility testing with networks and systems. - Increase maximum command length to 9000 bytes - Free memory before exiting, patch from Thorsten Horstmann. Useful for Dropbear ports to embedded systems and for checking memory leaks with valgrind. Only partially implemented for dbclient. This is disabled by default, enable with DROPBEAR_CLEANUP in sysoptions.h - DROPBEAR_DEFAULT_CLI_AUTHKEY setting now always prepends home directory unless there is a leading slash (~ isn't treated specially) - Fix small ECC memory leaks - Tighten validation of Diffie-Hellman parameters, from Florent Daigniere of Matta Consulting. Odds of bad values are around 2**-512 -- improbable. - Twofish-ctr cipher is supported though disabled by default - Fix pre-authentication timeout when waiting for client SSH-2.0 banner, thanks to CL Ouyang - Fix null pointer crash with restrictions in authorized_keys without a command, patch from Guilhem Moulin - Ensure authentication timeout is handled while reading the initial banner, thanks to CL Ouyang for finding it. - Fix null pointer crash when handling bad ECC keys. Found by afl-fuzz 2015.67 - Wednesday 28 January 2015 - Call fsync() after generating private keys to ensure they aren't lost if a reboot occurs. Thanks to Peter Korsgaard - Disable non-delayed zlib compression by default on the server. Can be enabled if required for old clients with DROPBEAR_SERVER_DELAY_ZLIB - Default client key path ~/.ssh/id_dropbear - Prefer stronger algorithms by default, from Fedor Brunner. AES256 over 3DES Diffie-hellman group14 over group1 - Add option to disable CBC ciphers. - Disable twofish in default options.h - Enable sha2 HMAC algorithms by default, the code was already required for ECC key exchange. sha1 is the first preference still for performance. - Fix installing dropbear.8 in a separate build directory, from Like Ma - Allow configure to succeed if libtomcrypt/libtommath are missing, from Elan Ruusamäe - Don't crash if ssh-agent provides an unknown type of key. From Catalin Patulea - Minor bug fixes, a few issues found by Coverity scan 2014.66 - Thursday 23 October 2014 - Use the same keepalive handling behaviour as OpenSSH. This will work better with some SSH implementations that have different behaviour with unknown message types. - Don't reply with SSH_MSG_UNIMPLEMENTED when we receive a reply to our own keepalive message - Set $SSH_CLIENT to keep bash happy, patch from Ryan Cleere - Fix wtmp which broke since 2013.62, patch from Whoopie 2014.65 - Friday 8 August 2014 - Fix 2014.64 regression, server session hang on exit with scp (and probably others), thanks to NiLuJe for tracking it down - Fix 2014.64 regression, clock_gettime() error handling which broke on older Linux kernels, reported by NiLuJe - Fix 2014.64 regression, writev() could occassionally fail with EAGAIN which wasn't caught - Avoid error message when trying to set QoS on proxycommand or multihop pipes - Use /usr/bin/xauth, thanks to Mike Frysinger - Don't exit the client if the local user entry can't be found, thanks to iquaba 2014.64 - Sunday 27 July 2014 - Fix compiling with ECDSA and DSS disabled - Don't exit abruptly if too many outgoing packets are queued for writev(). Patch thanks to Ronny Meeus - The -K keepalive option now behaves more like OpenSSH's "ServerAliveInterval". If no response is received after 3 keepalives then the session is terminated. This will close connections faster than waiting for a TCP timeout. - Rework TCP priority setting. New settings are if (connecting || ptys || x11) tos = LOWDELAY else if (tcp_forwards) tos = 0 else tos = BULK Thanks to Catalin Patulea for the suggestion. - Improve handling of many concurrent new TCP forwarded connections, should now be able to handle as many as MAX_CHANNELS. Thanks to Eduardo Silva for reporting and investigating it. - Make sure that exit messages from the client are printed, regression in 2013.57 - Use monotonic clock where available, timeouts won't be affected by system time changes - Add -V for version 2014.63 - Wednesday 19 February 2014 - Fix ~. to terminate a client interactive session after waking a laptop from sleep. - Changed port separator syntax again, now using host^port. This is because IPv6 link-local addresses use %. Reported by Gui Iribarren - Avoid constantly relinking dropbearmulti target, fix "make install" for multi target, thanks to Mike Frysinger - Avoid getting stuck in a loop writing huge key files, reported by Bruno Thomsen - Don't link dropbearkey or dropbearconvert to libz or libutil, thanks to Nicolas Boos - Fix linking -lcrypt on systems without /usr/lib, thanks to Nicolas Boos - Avoid crash on exit due to cleaned up keys before last packets are sent, debugged by Ronald Wahl - Fix a race condition in rekeying where Dropbear would exit if it received a still-in-flight packet after initiating rekeying. Reported by Oliver Metz. This is a longstanding bug but is triggered more easily since 2013.57 - Fix README for ecdsa keys, from Catalin Patulea - Ensure that generated RSA keys are always exactly the length requested. Previously Dropbear always generated N+16 or N+15 bit keys. Thanks to Unit 193 - Fix DROPBEAR_CLI_IMMEDIATE_AUTH mode which saves a network round trip if the first public key succeeds. Still not enabled by default, needs more compatibility testing with other implementations. - Fix for port 0 forwarding in the client and port forwarding with Apache MINA SSHD. Thanks to - Fix for bad system linux/pkt-sched.h header file with older Linux kernels, from Steve Dover - Fix signal handlers so that errno is saved, thanks to Erik Ahlén for a patch and Mark Wickham for independently spotting the same problem. 2013.62 - Tuesday 3 December 2013 - Disable "interactive" QoS connection options when a connection doesn't have a PTY (eg scp, rsync). Thanks to Catalin Patulea for the patch. - Log when a hostkey is generated with -R, fix some bugs in handling server hostkey commandline options - Fix crash in Dropbearconvert and 521 bit key, reported by NiLuJe - Update config.guess and config.sub again 2013.61test - Thursday 14 November 2013 - ECC (elliptic curve) support. Supports ECDSA hostkeys (requires new keys to be generated) and ECDH for setting up encryption keys (no intervention required). This is significantly faster. - [email protected] support for setting up encryption keys. This is another elliptic curve mode with less potential of NSA interference in algorithm parameters. curve25519-donna code thanks to Adam Langley - -R option to automatically generate hostkeys. This is recommended for embedded platforms since it allows the system random number device /dev/urandom a longer startup time to generate a secure seed before the hostkey is required. - Compile fixes for old vendor compilers like Tru64 from Daniel Richard G. - Make authorized_keys handling more robust, don't exit encountering malformed lines. Thanks to Lorin Hochstein and Mark Stillwell 2013.60 - Wednesday 16 October 2013 - Fix "make install" so that it doesn't always install to /bin and /sbin - Fix "make install MULTI=1", installing manpages failed - Fix "make install" when scp is included since it has no manpage - Make --disable-bundled-libtom work 2013.59 - Friday 4 October 2013 - Fix crash from -J command Thanks to Lluís Batlle i Rossell and Arnaud Mouiche for patches - Avoid reading too much from /proc/net/rt_cache since that causes system slowness. - Improve EOF handling for half-closed connections Thanks to Catalin Patulea - Send a banner message to report PAM error messages intended for the user Patch from Martin Donnelly - Limit the size of decompressed payloads, avoids memory exhaustion denial of service Thanks to Logan Lamb for reporting and investigating it. CVE-2013-4421 - Avoid disclosing existence of valid users through inconsistent delays Thanks to Logan Lamb for reporting. CVE-2013-4434 - Update config.guess and config.sub for newer architectures - Avoid segfault in server for locked accounts - "make install" now installs manpages dropbearkey.8 has been renamed to dropbearkey.1 manpage added for dropbearconvert - Get rid of one second delay when running non-interactive commands 2013.58 - Thursday 18 April 2013 - Fix building with Zlib disabled, thanks to Hans Harder and cuma@freetz - Use % as a separator for ports, fixes scp in multihop mode, from Hans Harder - Reject logins for other users when running as non-root, from Hans Harder - Disable client immediate authentication request by default, it prevents passwordless logins from working 2013.57 - Monday 15 April 2013 - Decreased connection setup time particularly with high latency connections, the number of round trips has been reduced for both client and server. CPU time hasn't been changed. - Client will send an initial key exchange guess to save a round trip. Dropbear implements an extension [email protected] to allow the first packet guess to succeed in wider circumstances than the standard behaviour. When communicating with other implementations the standard behaviour is used. - Client side: when public key or password authentication with $DROPBEAR_PASSWORD is used an initial authentication request will be sent immediately rather than querying the list of available methods. This behaviour is enabled by CLI_IMMEDIATE_AUTH option (on by default), please let the Dropbear author know if it causes any interoperability problems. - Implement client escape characters ~. (terminate session) and ~^Z (background session) - Server will more reliably clean up utmp when connection is closed, reported by Mattias Walström - Don't crash if /dev/urandom isn't writable (RHEL5), thanks to Scott Case - Add "-y -y" client option to skip host key checking, thanks to Hans Harder - scp didn't work properly on systems using vfork(), thanks to Frank Van Uffelen - Added IUTF8 terminal mode support (Linux and Mac OS). Not standardised yet though probably will be soon - Some verbose DROPBEAR_TRACE output is now hidden unless $DROPBEAR_TRACE2 enviroment variable is set - Fix using asymmetric MAC algorithms (broke in ) - Renamed configure.in to configure.ac to quieten autoconf, from Mike Frysinger 2013.56 - Thursday 21 March 2013 - Allow specifying cipher (-c) and MAC (-m) lists for dbclient - Allow using 'none' cipher or MAC (off by default, use options.h). Encryption is used during authentication then disabled, similar to OpenSSH HPN mode - Allow a user in immediately if the account has a blank password and blank passwords are enabled - Include a few extra sources of entropy from /proc on Linux, hash private keys as well. Dropbear will also write gathered entropy back into /dev/urandom - Added hmac-sha2-256 and hmac-sha2-512 support (off by default, use options.h) - Don't sent bad address "localhost" for -R forward connections, reported by Denis Bider - Add "-B" runtime option to allow blank passwords - Allow using IPv6 bracket notation for addresses in server "-p" option, from Ben Jencks - A few improvements for Android from Reimar Döffinger - Fix memory leak for TCP forwarded connections to hosts that timed out, reported by Norbert Benczúr. Appears to be a very long-standing bug. - Fix "make clean" for out of tree builds - Fix compilation when ENABLE_{SVR,CLI}_AGENTFWD are unset 2012.55 - Wednesday 22 February 2012 - Security: Fix use-after-free bug that could be triggered if command="..." authorized_keys restrictions are used. Could allow arbitrary code execution or bypass of the command="..." restriction to an authenticated user. This bug affects releases 0.52 onwards. Ref CVE-2012-0920. Thanks to Danny Fullerton of Mantor Organization for reporting the bug. - Compile fix, only apply IPV6 socket options if they are available in headers Thanks to Gustavo Zacarias for the patch - Overwrite session key memory on exit - Fix minor memory leak in unusual PAM authentication configurations. Thanks to Stathis Voukelatos - Other small code cleanups 2011.54 - Tuesday 8 November 2011 - Building statically works again, broke in 0.53 and 0.53.1 - Fix crash when forwarding with -R - Fixed various leaks found by Klocwork analysis software, thanks to them for running it - Set IPTOS_LOWDELAY for IPv6, thanks to Dave Taht - Bind to sockets with IPV6_V6ONLY so that it works properly on systems regardless of the system-wide setting - Added ALLOW_BLANK_PASSWORD option. Dropbear also now allows public key logins to accounts with a blank password. Thanks to Rob Landley - Fixed case where "-K 1" keepalive for dbclient would cause a SSH_MSG_IGNORE packet to be sent - Avoid some memory allocations in big number maths routines, improves performance slightly - Fix symlink target for installdropbearmulti with DESTDIR set, thanks to Scottie Shore - When requesting server allocated remote ports (-R 0:host:port) print a message informing what the port is, thanks to Ali Onur Uyar. - New version numbering scheme. Source repository has now migrated to Mercurial at https://secure.ucc.asn.au/hg/dropbear/graph/default 0.53.1 - Wednesday 2 March 2011 - -lcrypt needs to be before object files for static linking - Compile fix when both client and agent forwarding are disabled - Fix DROPBEAR_PRNGD_SOCKET mode - Don't allow setting zlib memLevel since it seems buggy 0.53 - Thurs 24 February 2011 - Various performance/memory use improvements - Client agent forwarding now works, using OpenSSH's ssh-agent - Improve robustness of client multihop mode - Fix a prime generation bug in bundled libtommath. This is unlikely to have generated any bad keys in the wild. See https://bugzilla.redhat.com/show_bug.cgi?id=615088 http://bugs.gentoo.org/show_bug.cgi?id=328383 http://bugs.gentoo.org/show_bug.cgi?id=328409 - Attempt to build against system libtomcrypt/libtommath if available. This can be disabled with ./configure --enable-bundled-libtom - Make -K (keepalive) and -I (idle timeout) work together sensibly in the client. The idle timeout is no longer reset by SSH_MSG_IGNORE packets. - Add diffie-hellman-group14-sha1 key exchange method - Compile fix if ENABLE_CLI_PROXYCMD is disabled - /usr/bin/X11/xauth is now the default path - Client remote forward (-L/-R) arguments now accept a listen address - In uClinux avoid trashing the parent process when a session exits - Blowfish is now disabled by default since it has large memory usage - Add option to change zlib windowbits/memlevel. Use less memory by default - DROPBEAR_SMALL_CODE is now disabled by default - SSH_ORIGINAL_COMMAND environment variable is set by the server when an authorized_keys command is specified. - Set SSH_TTY and SSH_CONNECTION environment variables in the server - Client banner is now printed to standard error rather than standard output - Capitalisation in many log messages has been made consistent. This may affect scripts that parse logfiles. 0.52 - Wed 12 November 2008 - Add "netcat-alike" option (-B) to dbclient, allowing Dropbear to tunnel standard input/output to a TCP port-forwarded remote host. - Add "proxy command" support to dbclient, to allow using a spawned process for IO rather than a direct TCP connection. eg dbclient remotehost is equivalent to dbclient -J 'nc remotehost 22' remotehost (the hostname is still provided purely for looking up saved host keys) - Combine netcat-alike and proxy support to allow "multihop" connections, with comma-separated host syntax. Allows running dbclient user1@host1,user2@host2,user3@host3 to end up at host3 via the other two, using SSH TCP forwarding. It's a bit like onion-routing. All connections are established from the local machine. The comma-separated syntax can also be used for scp/rsync, eg rsync -a -e dbclient m@gateway,m2@host,martello:/home/matt/ ~/backup/ to bounce through a few hosts. - Add -I "idle timeout" option (contributed by Farrell Aultman) - Allow restrictions on authorized_keys logins such as restricting commands to be run etc. This is a subset of those allowed by OpenSSH, doesn't yet allow restricting source host. - Use vfork() for scp on uClinux - Default to PATH=/usr/bin:/bin for shells. - Report errors if -R forwarding fails - Add counter mode cipher support, which avoids some security problems with the standard CBC mode. - Support [email protected] delayed compression for client/server. It can be required for the Dropbear server with the '-Z' option. This is useful for security as it avoids exposing the server to attacks on zlib by unauthenticated remote users, though requires client side support. - options.h has been split into options.h (user-changable) and sysoptions.h (less commonly changed) - Support "dbclient -s sftp" to specify a subsystem - Fix a bug in replies to channel requests that could be triggered by recent versions of PuTTY 0.51 - Thu 27 March 2008 - Make a copy of password fields rather erroneously relying on getwpnam() to be safe to call multiple times - If $SSH_ASKPASS_ALWAYS environment variable is set (and $SSH_ASKPASS is as well) always use that program, ignoring isatty() and $DISPLAY - Wait until a process exits before the server closes a connection, so that an exit code can be sent. This fixes problems with exit codes not being returned, which could cause scp to fail. 0.50 - Wed 8 August 2007 - Add DROPBEAR_PASSWORD environment variable to specify a dbclient password - Use /dev/urandom by default, since that's what everyone does anyway - Correct vfork() use for uClinux in scp (thanks to Alex Landau) - Exit with an exit code of 1 if dropbear can't bind to any ports (thanks to Nicolai Ehemann) - Improve network performance and add a -W <receive_window> argument for adjusting the tradeoff between network performance and memory consumption. - Fix a problem where reply packets could be sent during key exchange, in violation of the SSH spec. This could manifest itself with connections being terminated after 8 hours with new TCP-forward connections being established. - Add -K <keepalive_time> argument, ensuring that data is transmitted over the connection at least every N seconds. - dropbearkey will no longer generate DSS keys of sizes other than 1024 bits, as required by the DSS specification. (Other sizes are still accepted for use to provide backwards compatibility). 0.49 - Fri 23 February 2007 - Security: dbclient previously would prompt to confirm a mismatching hostkey but wouldn't warn loudly. It will now exit upon a mismatch. CVE-2007-1099 - Compile fixes, make sure that all variable definitions are at the start of a scope. - Added -P pidfile argument to the server (from Swen Schillig) - Add -N dbclient option for "no command" - Add -f dbclient option for "background after auth" - Add ability to limit binding to particular addresses, use -p [address:]port, patch from Max-Gerd Retzlaff. - Try to finally fix ss_family compilation problems (for old glibc systems) - Fix finding relative-path server hostkeys when running daemonized - Use $HOME in preference to that from /etc/passwd, so that dbclient can still work on broken systems. - Fix various issues found by Klocwork defect analysis, mostly memory leaks and error-handling. Thanks to Klocwork for their service. - Improve building in a separate directory - Add compile-time LOG_COMMANDS option to log user commands - Add '-y' flag to dbclient to unconditionally accept host keys, patch from Luciano Miguel Ferreira Rocha - Return immediately for "sleep 10 & echo foo", rather than waiting for the sleep to return (pointed out by Rob Landley). - Avoid hanging after exit in certain cases (such as scp) - Various minor fixes, in particular various leaks reported by Erik Hovland - Disable core dumps on startup - Don't erase over every single buffer, since it was a bottleneck. On systems where it really matters, encrypted swap should be utilised. - Read /dev/[u]random only once at startup to conserve kernel entropy - Upgrade to LibTomCrypt 1.16 and LibTomMath 0.40 - Upgrade config.status and config.guess 0.48.1 - Sat 11 March 2006 - Compile fix for scp 0.48 - Thurs 9 March 2006 - Check that the circular buffer is properly empty before closing a channel, which could cause truncated transfers (thanks to Tomas Vanek for helping track it down) - Implement per-IP pre-authentication connection limits (after some poking from Pablo Fernandez) CVE-2006-1206 - Exit gracefully if trying to connect to as SSH v1 server (reported by Rushi Lala) - Only read /dev/random once at startup when in non-inetd mode - Allow ctrl-c to close a dbclient password prompt (may still have to press enter on some platforms) - Merged in uClinux patch for inetd mode - Updated to scp from OpenSSH 4.3p2 - fixes a security issue where use of system() could cause users to execute arbitrary code through malformed filenames, ref CVE-2006-0225 0.47 - Thurs Dec 8 2005 - SECURITY: fix for buffer allocation error in server code, could potentially allow authenticated users to gain elevated privileges. All multi-user systems running the server should upgrade (or apply the patch available on the Dropbear webpage). CVE-2005-4178 - Fix channel handling code so that redirecting to /dev/null doesn't use 100% CPU. - Turn on zlib compression for dbclient. - Set "low delay" TOS bit, can significantly improve interactivity over some links. - Added client keyboard-interactive mode support, allows operation with newer OpenSSH servers in default config. - Log when pubkey auth fails because of bad ~/.ssh/authorized_keys permissions - Improve logging of assertions - Added aes-256 cipher and sha1-96 hmac. - Fix twofish so that it actually works. - Improve PAM prompt comparison. - Added -g (dbclient) and -a (dropbear server) options to allow connections to listening forwarded ports from remote machines. - Various other minor fixes - Compile fixes for glibc 2.1 (ss_family vs __ss_family) and NetBSD (netinet/in_systm.h needs to be included). 0.46 - Sat July 9 2005 - Fix long-standing bug which caused connections to be closed if an ssh-agent socket was no longer available - Print a warning if we seem to be blocking on /dev/random (suggested by Paul Fox) - Fixed a memory leak in DSS code (thanks to Boris Berezovsky for the patch) - dbclient -L no longer segfaults, allocate correct buffer size (thanks to David Cook for reporting it, and Christopher Faylor for independently sending in a patch) - Added RSA blinding to signing code (suggested by Dan Kaminsky) - Rearranged bignum reading/random generation code - Reset the non-blocking status on stderr and stdout as well as stdin, fixes a problem where the shell running dbclient will exit (thanks to Brent Roman for reporting it) - Fix so that all file descriptors are closed so the child shell doesn't inherit descriptors (thanks to Linden May for the patch) - Change signkey.c to avoid gcc 4 generating incorrect code - After both sides of a file descriptor have been shutdown(), close() it to avoid leaking descriptors (thanks to Ari Hyttinen for a patch) - Update to LibTomCrypt 1.05 and LibTomMath 0.35 0.45 - Mon March 7 2005 - Makefile no longer appends 'static' to statically linked binaries - Add optional SSH_ASKPASS support to the client - Respect HOST_LOOKUP option - Fix accidentally removed "return;" statement which was removed in 0.44 (causing clients which sent an empty terminal-modes string to fail to connect - including pssh, ssh.com, danger hiptop). (patches independently from Paul Fox, David Horwitt and Sven-Ola Tuecke) - Read "y/n" response for fingerprints from /dev/tty directly so that dbclient will work with scp. 0.44 - Mon Jan 3 2005 - SECURITY: Fix for PAM auth so that usernames are logged and conversation function responses are allocated correctly - all 0.44test4 users with PAM compiled in (not default) are advised to upgrade. - Fix calls to getnameinfo() for compatibility with Solaris - Pristine compilation works (run 'configure' from a fresh dir and make it there) - Fixes for compiling with most options disabled. - Upgraded to LibTomCrypt 0.99 and LibTomMath 0.32 - Make sure that zeroing out of values in LTM and LTC won't get optimised away - Removed unused functions from loginrec.c - /dev/random is now the default entropy source rather than /dev/urandom - Logging of IPs in auth success/failure messages for improved greppability - Fix dbclient so that "scp -i keyfile" works. (It can handle "-ikeyfile properly) - Avoid a race in server shell-handling code which prevents the exit-code from being returned to the client in some circumstances. - Makefile modified so that install target works correctly (doesn't try to install "all" binary) - patch from Juergen Daubert - Various minor fixes and compile warnings. 0.44test4 - Tue Sept 14 2004 21:15:54 +0800 - Fix inetd mode so it actually loads the hostkeys (oops) - Changed DROPBEAR_DEFPORT properly everywhere - Fix a small memory leak in the auth code - WCOREDUMP is only used on systems which support it (ie not cygwin or AIX) - Check (and fail for) cases when we can't negotiate algorithms with the remote side successfully (rather than bombing out ungracefully) - Handle authorized_keys files without a terminating newline - Fiddle the channel receive window size for possibly better performance - Added in the PAM authentication code (finally! thanks to Martin Carlsson) 0.44test3 - Fri Aug 27 22:20:54 +0800 - Fixed a bunch of warnings. - scp works correctly when passed a username (fix for the dbclient program itself as well, "-lmatt" works as well as "-l matt"). - Remove unrequired debian files - Exit with the remote process's return code for dbclient - Display stderr messages from the server in the client - Add circular buffering to the channel code. This should dramatically reduce the amount of backtraffic sent in response to traffic incoming to the Dropbear end - improves high-latency performance (ie dialup). - Various other related channel-handling fixups. - Allow leading lines in the banner when connecting to servers - Fixed printing out errors onto the network socket with stderr (for inetd mode when using xinetd) - Remove obselete documentation - Fix a null-pointer exception when trying to free non-existant listeners at cleanup. - DEBUG_TRACE now only works if you add "-v" to the program commandline - Don't leave stdin non-blocking on exit - this caused the parent shell of dbclient to close when dbclient exited, for some shells in BusyBox - Server connections no longer timeout after 5 minutes - Fixed stupid DSS hostkey typo (server couldn't load host keys) 0.44test2 - Tues Aug 17 2004 17:43:54 +0800 - Fix up dropbearmulti targets in the Makefile - symlinks are now created - Compile fake-rfc2553 even with dropbearconvert/dropbearkey - this allows them to work on platforms without a native getaddrinfo() - Create ~/.ssh/known_hosts properly if it doesn't exist - Fix basename() function prototype - Backport some local changes (more #ifdefs for termcodes.c, a fix for missing defines on AIX). - Let dbclient be run as "ssh" - Initialise mp_ints by default 0.44test1 - Sun Aug 16 2005 17:43:54 +0800 - TESTING RELEASE - this is the first public release of the client codebase, so there are sure to be bugs to be found. In addition, if you're just using the server portion, the final binary size probably will increase - I'll be trying to get it back down in future releases. - Dropbear client added - lots of changes to the server code as well to generalise things - IPv6 support added for client, server, and forwarding - New makefile with more generic support for multiple-program binaries 0.43 - Fri Jul 16 2004 17:44:54 +0800 - SECURITY: Don't try to free() uninitialised variables in DSS verification code. Thanks to Arne Bernin for pointing out this bug. This is possibly exploitable, all users with DSS and pubkey-auth compiled in are advised to upgrade. CVE-2004-2486 - Clean up agent forwarding socket files correctly, patch from Gerrit Pape. - Don't go into an infinite loop when portforwarding to servers which don't send any initial data/banner. Patch from Nikola Vladov - Fix for network vs. host byte order in logging remote TCP ports, also from Gerrit Pape. - Initialise many pointers to NULL, for general safety. Also checked cleanup code for mp_ints (related to security issues above). 0.42 - Wed Jun 16 2004 12:44:54 +0800 - Updated to Gerrit Pape's official Debian subdirectory - Fixed bad check when opening /dev/urandom - thanks to Danny Sung. - Added -i inetd mode flag, and associated options in options.h . Dropbear can be compiled with either normal mode, inetd, or both modes. Thanks to Gerrit Pape for basic patch and motivation. - Use <dirent.h> rather than <sys/dir.h> for POSIX compliance. Thanks to Bill Sommerfield. - Fixed a TCP forwarding (client-local, -L style) bug which caused the whole session to close if the TCP connection failed. Thanks to Andrew Braund for reporting it and helping track it down. - Re-enable sigpipe for child processes. Thanks to Gerrit Pape for some suggestions, and BSD manpages for a clearer explanation of the behaviour. - Added manpages, thanks to Gerrit Pape. - Changed license text for LibTomCrypt and LibTomMath. - Added strip-static target - Fixed a bug in agent-forwarding cleanup handler - would segfault (dereferencing a null pointer) if agent forwarding had failed. - Fix behaviour of authorized_keys parsing, so larger (>1024 bit) DSA keys will work. Thanks to Dr. Markus Waldeck for the report. - Fixed local port forwarding code so that the "-j" option will make forwarding attempts fail more gracefully. - Allow repeated requests in a single session if previous ones fail - this fixes PuTTY and some other SCP clients, which try SFTP, then fall-back to SCP if it isn't available. Thanks to Stirling Westrup for the report. - Updated to LibTomCrypt 0.96 and LibTomMath 0.30. The AES code now uses smaller non-precomputed tables if DROPBEAR_SMALL_CODE is defined in options.h, leading to a significant reduction in the binary size. 0.41 - Mon Jan 19 2004 22:40:19 +0800 - Fix in configure so that cross-compiling works, thanks to numerous people for reporting and testing - Terminal mode parsing now handles empty terminal mode strings (sent by Windows ssh.com clients), thanks to Ricardo Derbes for the report - Handling is improved for users with no shell specified in /etc/passwd, thanks again to Ricardo Derbes - Fix for compiling with --disable-syslog, thanks to gordonfh - Various minor fixes allow scp to work with irix, thanks to Paul Marinceu for fixing it up - Use <stropts.h> not <sys/stropts.h>, since the former seems more common 0.40 - Tue Jan 13 2004 21:05:19 +0800 - Remote TCP forwarding (-R) style implemented - Local and remote TCP forwarding can each be disabled at runtime (-k and -j switches) - Fix for problems detecting openpty() with uClibc - many thanks to various people for reporting and testing fixes, including (in random order) Cristian Ionescu-Idbohrn, James Ewing, Steve Dover, Thomas Lundquist and Frederic Lavernhe - Improved portability for IRIX, thanks to Paul Marinceu - AIX and HPUX portability fixes, thanks to Darren Tucker for patches - prngd should now work correctly, thanks to Darren Tucker for the patch - scp compilation on systems without strlcpy() is fixed, thanks to Peter Jannesen and David Muse for reporting it (independently and simultaneously :) - Merged in new LibTomCrypt 0.92 and LibTomMath 0.28 0.39 - Tue Dec 16 2003 15:19:19 +0800 - Better checking of key lengths and parameters for DSS and RSA auth - Print fingerprint of keys used for pubkey auth - More consistent logging of usernames and IPs - Added option to disable password auth (or just for root) at runtime - Avoid including bignum functions which don't give much speed benefit but take up binary size - Added a stripped down version of OpenSSH's scp binary - Added additional supporting functions for Irix, thanks to Paul Marinceu - Don't check for unused libraries in configure script - Removed trailing comma in algorithm lists (thanks to Mihnea Stoenescu) - Fixed up channel close handling, always send close packet in response (also thanks to Mihnea Stoenescu) - Various makefile improvements for cross-compiling, thanks to Friedrich Lobenstock and Mihnea Stoenescu - Use daemon() function if available (or our own copy) rather than separate code (thanks to Frédéric Lavernhe for the report and debugging, and Bernard Blackham for his suggestion on what to look at) - Fixed up support for first_kex_packet_follows, required to talk to ssh.com clients. Thanks to Marian Stagarescu for the bug report. - Avoid using MAXPATHLEN, pointer from Ian Morris - Improved input sanity checking 0.38 - Sat Oct 11 2003 16:28:13 +0800 - Default hostkey path changed to /etc/dropbear/dropbear_{rsa,dss}_host_key rather than /etc/dropbear_{rsa,dss}_host_key - Added SMALL and MULTI text files which have info on compiling for multiple binaries or small binaries - Allow for commandline definition of some options.h settings (without warnings) - Be more careful handling EINTR - More fixes for channel closing - Added multi-binary support - Improved logging of IPs, now get logged in all cases - Don't chew cpu when waiting for version identification string, also make sure that we kick off people if they don't auth within 5 minutes. - Various small fixes, warnings etc - Display MOTD if requested - suggested by Trent Lloyd <lathiat at sixlabs.org> and Zach White <zwhite at darkstar.frop.org> - sftp support works (relies on OpenSSH sftp binary or similar) - Added --disable-shadow option (requested by the floppyfw guys) 0.37 - Wed Sept 24 2003 19:42:12 +0800 - Various portability fixes, fixes for Solaris 9, Tru64 5.1, Mac OS X 10.2, AIX, BSDs - Updated LibTomMath to 0.27 and LibTomCrypt to 0.90 - Renamed util.{c,h} to dbutil.{c,h} to avoid conflicts with system util.h - Added some small changes so it'll work with AIX (plus Linux Affinity). Thanks to Shig for them. - Improved the closing messages, so a clean exit is "Exited normally" - Added some more robust integer/size checking in buffer.c as a backstop for integer overflows - X11 forwarding fixed for OSX, path for xauth changed to /usr/X11R6/bin/xauth - Channel code handles closing more nicely, doesn't sit waiting for an extra keystroke on BSD/OSX platforms, and data is flushed fully before closing child processes (thanks to Cristian Ionescu-Idbohrn <cristian.ionescu-idbohrn at axis.com> for pointing that out). - Changed "DISABLE_TCPFWD" to "ENABLE_TCPFWD" (and for x11/auth) so "disable DISABLE_TCPWD" isn't so confusing. - Fix authorized_keys handling (don't crash on too-long keys, and use fgetc not getc to avoid strange macro-related issues), thanks to Cristian Ionescu-Idbohrn <cristian.ionescu-idbohrn at axis.com> and Steve Rodgers <hwstar at cox.net> for reporting and testing. - Fixes to the README with regard to uClibc systems, thanks to Cristian Ionescu-Idbohrn <cristian.ionescu-idbohrn at axis.com>, as well as general improvements to documentation (split README/INSTALL) - Fixed up some compilation problems with dropbearconvert/dropbearkey if DSS or RSA were disabled, reported by Patrik Karlsson <patrik at cqure.net> - Fix double-free bug for hostkeys, reported by Vincent Sanders <vince at kyllikki.org> - Fix up missing \ns from dropbearconvert help message, thanks to Mordy Ovits <movits at bloomberg.com> for the patch 0.36 - Tue August 19 2003 12:16:23 +0800 - Fix uninitialised temporary variable in DSS signing code (thanks to Matthew Franz <mdfranz at io.com> for reporting, and the authors of Valgrind for making it easy to track down) - Fix remote version-string parsing error (thanks to Bernard Blackham <bernard at blackham.com.au> for noticing) - Improved host-algorithm-matching algorithm in algo.c - Decreased MAX_STRING_LEN to a more realistic value - Fix incorrect version (0.34) in this CHANGES file for the previous release. 0.35 - Sun August 17 2003 05:37:47 +0800 - Fix for remotely exploitable format string buffer overflow. (thanks to Joel Eriksson <je at bitnux.com>) 0.34 - Fri August 15 2003 15:10:00 +0800 - Made syslog optional, both at compile time and as a compile option (suggested by Laurent Bercot <ska at skarnet.org>) - Fixup for bad base64 parsing in authorized_keys (noticed by Davyd Madeley <davyd at zdlcomputing.com>) - Added initial tcp forwarding code, only -L (local) at this stage - Improved "make install" with DESTDIR and changing ownership seperately, don't check for setpgrp on Linux for crosscompiling. (from Erik Andersen <andersen at codepoet.org>) - More commenting, fix minor compile warnings, make return values more consistent etc - Various signedness fixes - Can listen on multiple ports - added option to disable openpty with configure script, (from K.-P. Kirchdörfer <kapeka at epost.de>) - Various cleanups to bignum code (thanks to Tom St Denis <tomstdenis at iahu.ca>) - Fix compile error when disabling RSA (from Marc Kleine-Budde <kleine-budde at gmx.de>) - Other cleanups, splitting large functions for packet and kex handling etc 0.33 - Sun June 22 2003 22:24:12 +0800 - Fixed some invalid assertions in the channel code, fixing the server dying when forwarding X11 connections. - Add dropbearconvert to convert to/from OpenSSH host keys and Dropbear keys - RSA keys now keep p and q parameters for compatibility -- old Dropbear keys still work, but can't be converted to OpenSSH etc. - Debian packaging directory added, thanks to Grahame (grahame at angrygoats.net) - 'install' target added to the makefile - general tidying, improve consistency of functions etc - If RSA or DSS hostkeys don't exist, that algorithm won't be used. - Improved RSA and DSS key generation, more efficient and fixed some minor bugs (thanks to Tom St Denis for the advice) - Merged new versions of LibTomCrypt (0.86) and LibTomMath (0.21) 0.32 - Sat May 24 2003 12:44:11 +0800 - Don't compile unused code from libtomcrypt (test vectors etc) - Updated to libtommath 0.17 and libtomcrypt 0.83. New libtommath results in smaller binary size, due to not linking unrequired code - X11 forwarding added - Agent forwarding added (for OpenSSH.com ssh client/agent) - Fix incorrect buffer freeing when banners are used - Hostname resolution works - Various minor bugfixes/code size improvements etc 0.31 - Fri May 9 2003 17:57:16 +0800 - Improved syslog messages - IP logging etc - Strip control characters from log messages (specified username currently) - Login recording (utmp/wtmp) support, so last/w/who work - taken from OpenSSH - Shell is started as a proper login shell, so /etc/profile etc is sourced - Ptys work on Solaris (2.8 x86 tested) now - Fixed bug in specifying the rsa hostkey - Fixed bug in compression code, could trigger if compression resulted in larger output than input (uncommon but possible). 0.30 - Thu Apr 17 2003 18:46:15 +0800 - SECURITY: buffer.c had bad checking for buffer increment length - fixed - channel code now closes properly on EOF - scp processes don't hang around - syslog support added - improved auth/login/failure messages - general code tidying, made return codes more consistent - Makefile fixed for dependencies and makes libtomcrypt as well - Implemented sending SSH_MSG_UNIMPLEMENTED :) 0.29 - Wed Apr 9 2003 - Fixed a stupid bug in 0.28 release, 'newstr = strdup(oldstr)', not 'newstr=oldstr' 0.28 - Sun Apr 6 2003 - Initial public release Development was started in October 2002