Mercurial > dropbear
graph
-
Version 2014.642014-07-27, by Matt Johnston
-
Add '-V' for version2014-07-27, by Matt Johnston
-
Avoid use-after-free when channel inithandler fails. Thanks to Coverity2014-07-26, by Matt Johnston
-
changes for 2014.642014-07-25, by Matt Johnston
-
Set tcp priority as follows:2014-07-16, by Matt Johnston
-
Fix auth timeout regression2014-07-09, by Matt Johnston
-
Make -K keepalive behave like OpenSSH's ServerAliveInterval2014-07-08, by Matt Johnston
-
Make sure client exit messages don't get lost2014-07-08, by Matt Johnston
-
Send a failure response if a client receives a global request2014-07-08, by Matt Johnston
-
Improve handling lots of concurrent forwarded connections. Increase2014-06-25, by Matt Johnston
-
Fix compiling with ECDSA and DSS disabled2014-06-25, by Matt Johnston
-
Be more careful in case a platform doesn't define UIO_MAXIOV nor IOV_MAX2014-05-20, by Matt Johnston
-
Limit size of the iovect passed to writev in packet.c2014-05-20, by Ronny Meeus
-
Print errno information in write_packet2014-05-20, by Ronny Meeus
-
Fix pubkey auth if the first key presented fails (infinite loop of2014-04-23, by Matt Johnston
-
Fix monotonic_now() on OS X2014-03-21, by Matt Johnston
-
Experiment of always writing data if available. Might waste a writev() with2014-03-15, by Matt Johnston
-
Add new monotonic_now() wrapper so that timeouts are unaffected by2014-03-13, by Matt Johnston
-
Fix typo2014-03-13, by Matt Johnston
-
Use AUTH_TIMEOUT only before authdone != 1.2014-03-13, by Yousong Zhou
-
Don't need to mkdir2014-03-08, by Matt Johnston
-
Fix env vars for travis again2014-03-07, by Matt Johnston
-
Fix "make install" dependency so that it works without prior "make"2014-03-07, by Matt Johnston
-
Add some tests for multi2014-03-07, by Matt Johnston
-
Install system libtom libs, run dropbearkey when it's done2014-03-07, by Matt Johnston
-
The arguments are for configure, not make!2014-03-07, by Matt Johnston
-
Add Travis CI autobuilder config2014-03-07, by Matt Johnston
-
Make some debug info conditional2014-02-24, by Matt Johnston
-
A few fixes for cases where compression increases payload sizes, and2014-02-22, by Matt Johnston
-
Fix typo in Catalin's name2014-02-19, by Matt Johnston
-
Added signature for changeset 277429102f132014-02-19, by Matt Johnston
-
Added tag DROPBEAR_2014.63 for changeset 2351b2da8e0d2014-02-19, by Matt Johnston
-
README: fix ecdsa key generation command2014-02-09, by Catalin Patulea
-
CHANGES for 2014.632014-02-19, by Matt Johnston
-
- Fix dbclient with port 0 for server-allocated2014-02-18, by Matt Johnston
-
Fix building with system libtomcrypt/libtommath2014-02-18, by Matt Johnston
-
Add linux/types.h to includes to avoid missing ___u64 etc2014-02-17, by Steve Dover
-
Read (and enqueue) packets from interactive input even when2014-02-17, by Matt Johnston
-
Change port separator to ^ since % is used in ipv6 addresses2014-02-15, by Matt Johnston
-
Disable immediate auth for delayed-zlib mode2014-02-15, by Matt Johnston
-
- Save errno in signal handlers2014-02-15, by Matt Johnston
-
generate RSA keys of exact length2014-02-14, by Matt Johnston
-
cleanup before clearing keys2014-02-12, by Matt Johnston
-
Fix linking -lcrypt for systems without libcrypt in /usr/lib2014-02-06, by Nicolas Boos
-
Avoid linking dropbearconvert and dropbearkey to libz or libutil2014-02-06, by Nicolas Boos
-
Fix check for EINTR2014-01-28, by Matt Johnston
-
Back out accidentally committed files2014-01-23, by Matt Johnston
-
requirenext doesn't need two values2014-01-23, by Matt Johnston
-
Fix failing rekeying when we receive a still-in-flight packet2014-01-23, by Matt Johnston
-
Forgot to save the change2014-01-17, by Matt Johnston
-
DROPBEAR_CLI_AUTH_IMMEDIATE fixed, now enabled by default2014-01-17, by Matt Johnston
-
Fix so that "make install" for multi target won't fail on scp which doesn't2013-12-11, by Mike Frysinger
-
Turn dropbearmulti into a real target so we don't constantly re-link it2013-12-11, by Mike Frysinger
-
Added signature for changeset 3d1d7d151c0c2013-12-03, by Matt Johnston
-
Added tag DROPBEAR_2013.62 for changeset 3d1d7d151c0c2013-12-03, by Matt Johnston
-
Update to 2013-10-012013-12-03, by Matt Johnston
-
Fix disabling DSS key2013-12-03, by Matt Johnston
-
Log when generating a hostkey2013-12-03, by Matt Johnston
-
Update README2013-12-03, by Matt Johnston
-
Exit if we don't have keys and -R wasn't specified2013-12-03, by Matt Johnston
-
Fix TRACEs of cli_send_netcat_request2013-12-02, by Catalin Patulea
-
- Sockets are set to lowdelay priority initially to improve conneciton setup2013-12-02, by Matt Johnston
-
Set IPTOS_LOWDELAY on PTY sessions only2013-12-02, by Catalin Patulea
-
Only define LTM_DESC if it isn't already2013-12-02, by Matt Johnston
-
merge2013-11-27, by Matt Johnston
-
- Increase buffer size, fixes converting 521bit ECC key2013-11-27, by Matt Johnston
-
Fix library order of libtom*2013-11-25, by Matt Johnston
-
Try and fix utmp handling2013-11-25, by Matt Johnston
-
Fix some warnings2013-11-25, by Matt Johnston
-
Added signature for changeset 9ec083a21adf2013-11-14, by Matt Johnston
-
Added tag DROPBEAR_2013.61test for changeset e894dbc015ba2013-11-14, by Matt Johnston
-
docs for ecdsa2013-11-14, by Matt Johnston
-
another new config.guess 2013-06-102013-11-14, by Matt Johnston
-
rename random.h to dbrandom.h since some OSes have a system random.h2013-11-14, by Matt Johnston
-
use oldstyle comments2013-11-14, by Matt Johnston
-
Replace some deprecated macros with other ones, from Daniel Richard G.2013-11-14, by Matt Johnston
-
- Some fixes for old compilers like tru64 v4 from Daniel Richard G.2013-11-14, by Matt Johnston
-
merge ecc again2013-11-14, by Matt Johnston
-
- Make curve25519 work after fixing a typo, interoperates with OpenSSH ecc2013-11-08, by Matt Johnston
-
merge yet again2013-10-31, by Matt Johnston
-
merge again2013-10-31, by Matt Johnston
-
Merge2013-10-31, by Matt Johnston
-
Fix specifying a keysize for key generation, fix key name arguments ecc2013-10-31, by Matt Johnston
-
Merge in ECC2013-10-21, by Matt Johnston
-
Added signature for changeset a50a1dc743312013-10-16, by Matt Johnston
-
Added signature for changeset 025237c9f0a12013-10-16, by Matt Johnston
-
Added tag DROPBEAR_2013.60 for changeset a50a1dc743312013-10-16, by Matt Johnston
-
- 2013.60, update CHANGES2013-10-16, by Matt Johnston
-
Make --disable-bundled-libtom work, based on patch from Mike Frysinger2013-10-15, by Matt Johnston
-
- Fix "inst_scp" target since there isn't a manpage2013-10-09, by Matt Johnston
-
Add @exec_prefix@ that was missing2013-10-09, by Matt Johnston
-
Added signature for changeset deb211f75ca12013-10-04, by Matt Johnston
-
Added tag DROPBEAR_2013.59 for changeset 7b68e581985f2013-10-04, by Matt Johnston
-
Fix debian installation of manpages2013-10-04, by Matt Johnston
-
Version 2013.592013-10-04, by Matt Johnston
-
Don't say "SSH 2" any more since protocol version 1 is irrelevant2013-10-03, by Matt Johnston
-
Add manpage for dropbearconvert2013-10-03, by Matt Johnston
-
Get rid of spurious newlines in pam log messages2013-10-03, by Matt Johnston
-
Send PAM error messages as a banner messages2013-10-03, by Matt Johnston
-
Constant time memcmp for the hmac and password crypt2013-10-03, by Matt Johnston
-
Only send a failure response to a channel request if wantreply is set.2013-09-20, by Matt Johnston
-
Improve EOF handling for half-close. Patch from Catalin Patulea2013-09-20, by Matt Johnston
-
Remove accidental one second sleep leftover from debugging2013-08-12, by Matt Johnston
-
merge2013-07-08, by Matt Johnston
-
strdup the proxycmd to avoid crash when freeing, from Lluís Batlle i Rossell2013-07-08, by Matt Johnston
-
limit how much we read from rt_cache etc2013-05-28, by Matt Johnston
-
merge2013-05-26, by Matt Johnston
-
merge2013-05-26, by Matt Johnston
-
improve auth failure delays to avoid indicating which users exist2013-05-26, by Matt Johnston
-
Fix bad comma in header list2013-05-13, by Matt Johnston
-
Update config.guess and config.sub2013-05-13, by Matt Johnston
-
Limit decompressed size2013-05-08, by Matt Johnston
-
Avoid segfault for locked accounts (invalid salt to crypt())2013-04-29, by Matt Johnston
-
Save with utf8 encoding2013-04-18, by Matt Johnston
-
Added signature for changeset f168962bab852013-04-18, by Matt Johnston
-
Added tag DROPBEAR_2013.58 for changeset e76614145aea2013-04-18, by Matt Johnston
-
Don't enable CLI_IMMEDIATE_AUTH by default, it breaks blank password logins2013-04-18, by Matt Johnston
-
Use % rather than # for port delimiter2013-04-17, by Matt Johnston
-
Use '#' for host#port separator, document it. This fixes scp2013-04-17, by Matt Johnston
-
If running as non-root only allow that user to log in2013-04-17, by Matt Johnston
-
Fix build when zlib is disabled, from2013-04-16, by Matt Johnston
-
Added signature for changeset 095b46180bbc2013-04-15, by Matt Johnston
-
Added tag DROPBEAR_2013.57 for changeset 96b8bcb880172013-04-15, by Matt Johnston
-
bump version to 2013.572013-04-15, by Matt Johnston
-
changelog updates for 2013.572013-04-15, by Matt Johnston
-
requirenext fixup for firstkexfollows2013-04-14, by Matt Johnston
-
Document escape chars2013-04-14, by Matt Johnston
-
merge2013-04-14, by Matt Johnston
-
-y -y to disable hostkey checking2013-04-14, by Matt Johnston
-
Fix zlib for split newkeys2013-04-11, by Matt Johnston
-
run closehandlers on cleanup2013-04-10, by Matt Johnston
-
reset terminal modes before printing a message2013-04-10, by Matt Johnston
-
- Rename buf_put_ecc_pubkey_string() to buf_put_ecc_raw_pubkey_string() ecc2013-04-08, by Matt Johnston
-
Make _sign and _verify functions take a buffer* rather than void* and int ecc2013-04-06, by Matt Johnston
-
More changes for KEX and ECDH. Set up hash descriptors, make ECC code work, ecc2013-03-28, by Matt Johnston
-
setup tcp after requesting a channel - might hide some DNS latency2013-04-03, by Matt Johnston
-
Take transmit and receive keys into use separately2013-04-03, by Matt Johnston
-
Fix MAC bug which would prevent asymmetric hashes2013-04-03, by Matt Johnston
-
Just put the version string on the queue, don't use atomicio2013-04-03, by Matt Johnston
-
fix leftover kexguess debugging2013-04-02, by Matt Johnston
-
Fix a few options and headers2013-04-02, by Matt Johnston
-
merge2013-04-02, by Matt Johnston
-
merge kexguess branch2013-04-02, by Matt Johnston
-
Put some #ifdef options around first-follows options in case they kexguess2013-04-02, by Matt Johnston
-
Don't usually need to recalculate dh_e for the repeated kexdh_init packet kexguess2013-04-02, by Matt Johnston
-
add IUTF82013-04-02, by Matt Johnston
-
fix tabs2013-04-02, by Matt Johnston
-
merge2013-04-02, by Matt Johnston
-
Fix segfault when /dev/urandom isn't writable2013-04-02, by Matt Johnston
-
Be a bit more careful about when we want to use CLI_AUTH_IMMEDIATE2013-04-01, by Matt Johnston
-
Run the cleanup handler also when we close due to TCP connection being closed2013-04-01, by Matt Johnston
-
Try password before interactive - bit of a hack2013-04-01, by Matt Johnston
-
Move the more verbose TRACE() statements into TRACE2()2013-03-31, by Matt Johnston
-
Send an auth packet straight away, save another roundtrip2013-03-31, by Matt Johnston
-
Fix incorrect logic for USE_VFORK and calling arg_setup()2013-03-31, by Matt Johnston
-
Try using writev() for writing packets out to tcp2013-03-31, by Matt Johnston
-
Don't bother waiting for a ssh-connection service reply - the server2013-03-31, by Matt Johnston
-
send out our kexinit packet before blocking to read the SSH version string2013-03-30, by Matt Johnston
-
Define _GNU_SOURCE for vasprintf2013-03-23, by Matt Johnston
-
rename configure.in -> configure.ac2013-03-23, by Mike Frysinger
-
Fix a few compile warnings2013-03-23, by Matt Johnston
-
Add ~. and ~^Z handling to exit/suspend dbclient2013-03-23, by Matt Johnston
-
Added signature for changeset 9b80981212fe2013-03-21, by Matt Johnston
-
Added tag DROPBEAR_2013.56 for changeset 1b8b2b9d6e942013-03-21, by Matt Johnston
-
2013.56 changelog2013-03-21, by Matt Johnston
-
update text about authorized_keys options2013-03-21, by Matt Johnston
-
Add URL to usage text2013-03-21, by Matt Johnston
-
Make hmac-sha2-256 and hmac-sha2-512 work2013-03-21, by Matt Johnston
-
Make sure "struct timeval" is initialised on OS X to avoid valgrind warnings2013-03-21, by Matt Johnston
-
Fix "-c none" so that it allows aes during authentication2013-03-20, by Matt Johnston
-
Fix "-m none" case and ugly typo2013-03-20, by Matt Johnston
-
Fix "-m none" case where an entire packet fits in a block and can be2013-03-20, by Matt Johnston
-
Merge "none" cipher/MAC branch. Also adds sha256 and sha5122013-03-20, by Matt Johnston
-
use an empty writebuf rather than a NULL one2013-03-20, by Matt Johnston
-
document a few more changes2013-03-19, by Matt Johnston