Mercurial > dropbear

changeset 1521:198e2ee0f4b1

Find changesets by keywords (author, files, the commit message), revision number or hash, or revset expression.
- Fix dependencies and remove old default_options.h from version control - Rename default_options.h.in -> default_options.h, and default_options.h -> default_options_guard.h - Fix newlines in default_options.h
author Matt Johnston <matt@ucc.asn.au>
date Mon, 19 Feb 2018 22:16:50 +0800
parents 84578193ef47
children 47fcbdd12d9b
files Makefile.in default_options.h default_options.h.in ifndef_wrapper.sh options.h
diffstat 5 files changed, 19 insertions(+), 461 deletions(-) [+]
line wrap: on
line diff
--- a/Makefile.in	Sun Feb 18 23:48:32 2018 +0800
+++ b/Makefile.in	Mon Feb 19 22:16:50 2018 +0800
@@ -23,9 +23,10 @@
 LIBTOM_LIBS=$(STATIC_LTC) $(STATIC_LTM)
 endif
 
+OPTION_HEADERS = default_options_guard.h sysoptions.h
 ifneq ($(wildcard localoptions.h),)
 CFLAGS+=-DLOCALOPTIONS_H_EXISTS
-LOCALOPTIONS_H=localoptions.h
+OPTION_HEADERS += localoptions.h
 endif
 
 COMMONOBJS=dbutil.o buffer.o dbhelpers.o \
@@ -98,7 +99,6 @@
 	CFLAGS+= -DDROPBEAR_CLIENT
 endif
 
-
 # these are exported so that libtomcrypt's makefile will use them
 export CC
 export CFLAGS
@@ -121,9 +121,16 @@
 
 all: $(TARGETS)
 
-# a bit lazy, but safer
-HEADERS=$(wildcard $(srcdir)/*.h *.h)
-*.o: $(HEADERS)
+# for simplicity assume all source depends on all headers
+HEADERS=$(wildcard $(srcdir)/*.h *.h) $(OPTION_HEADERS)
+%.o : %.c $(HEADERS)
+	$(CC) -c $(CFLAGS) $(CPPFLAGS) $< -o $@
+
+default_options_guard.h: default_options.h
+	@echo Creating $@
+	@printf "/*\n > > > Do not edit this file (default_options_guard.h) < < <\nGenerated from "$^"\nLocal customisation goes in localoptions.h\n*/\n\n" > [email protected]
+	@$(srcdir)/ifndef_wrapper.sh < $^ >> [email protected]
+	@mv [email protected] $@
 
 strip: $(TARGETS)
 	$(STRIP) $(addsuffix $(EXEEXT), $(TARGETS))
@@ -197,10 +204,10 @@
 	-rm -f $*$(EXEEXT)
 	-ln -s dropbearmulti$(EXEEXT) $*$(EXEEXT)
 
-$(STATIC_LTC): 
+$(STATIC_LTC): $(OPTION_HEADERS)
 	$(MAKE) -C libtomcrypt
 
-$(STATIC_LTM):
+$(STATIC_LTM): $(OPTION_HEADERS)
 	$(MAKE) -C libtommath
 
 .PHONY : clean sizes thisclean distclean tidy ltc-clean ltm-clean
@@ -224,14 +231,7 @@
 distclean: clean tidy
 	-rm -f config.h
 	-rm -f Makefile
+	-rm -f default_options_guard.h
 
 tidy:
 	-rm -f *~ *.gcov */*~
-
-# default_options.h is stored in version control, could not find a workaround
-# for parallel "make -j" and dependency rules.
-default_options.h: default_options.h.in 
-	@echo Creating $@
-	@echo "/*\n > > > Do not edit this file (default_options.h) < < <\nGenerated from "$^"\nLocal customisation goes in localoptions.h\n*/\n\n" > [email protected]
-	@$(srcdir)/ifndef_wrapper.sh < $^ >> [email protected]
-	@mv [email protected] $@
--- a/default_options.h	Sun Feb 18 23:48:32 2018 +0800
+++ b/default_options.h	Mon Feb 19 22:16:50 2018 +0800
@@ -1,16 +1,9 @@
-/*
- > > > Do not edit this file (default_options.h) < < <
-Generated from ../default_options.h.in
-Local customisation goes in localoptions.h
-*/
-
-
 #ifndef DROPBEAR_DEFAULT_OPTIONS_H_
 #define DROPBEAR_DEFAULT_OPTIONS_H_
 /*
                      > > > Read This < < <
 
-default_options.h.in  documents compile-time options, and provides default values.
+default_options.h  documents compile-time options, and provides default values.
 
 Local customisation should be added to localoptions.h which is
 used if it exists. Options defined there will override any options in this
@@ -20,25 +13,15 @@
 
 IMPORTANT: Some options will require "make clean" after changes */
 
-#ifndef DROPBEAR_DEFPORT
 #define DROPBEAR_DEFPORT "22"
-#endif
 
 /* Listen on all interfaces */
-#ifndef DROPBEAR_DEFADDRESS
 #define DROPBEAR_DEFADDRESS ""
-#endif
 
 /* Default hostkey paths - these can be specified on the command line */
-#ifndef DSS_PRIV_FILENAME
 #define DSS_PRIV_FILENAME "/etc/dropbear/dropbear_dss_host_key"
-#endif
-#ifndef RSA_PRIV_FILENAME
 #define RSA_PRIV_FILENAME "/etc/dropbear/dropbear_rsa_host_key"
-#endif
-#ifndef ECDSA_PRIV_FILENAME
 #define ECDSA_PRIV_FILENAME "/etc/dropbear/dropbear_ecdsa_host_key"
-#endif
 
 /* Set NON_INETD_MODE if you require daemon functionality (ie Dropbear listens
  * on chosen ports and keeps accepting connections. This is the default.
@@ -50,126 +33,76 @@
  *
  * Both of these flags can be defined at once, don't compile without at least
  * one of them. */
-#ifndef NON_INETD_MODE
 #define NON_INETD_MODE 1
-#endif
-#ifndef INETD_MODE
 #define INETD_MODE 1
-#endif
 
 /* Include verbose debug output, enabled with -v at runtime. 
  * This will add a reasonable amount to your executable size. */
-#ifndef DEBUG_TRACE
 #define DEBUG_TRACE 0
-#endif
 
 /* Set this if you want to use the DROPBEAR_SMALL_CODE option. This can save
  * several kB in binary size however will make the symmetrical ciphers and hashes
  * slower, perhaps by 50%. Recommended for small systems that aren't doing
  * much traffic. */
-#ifndef DROPBEAR_SMALL_CODE
 #define DROPBEAR_SMALL_CODE 1
-#endif
 
 /* Enable X11 Forwarding - server only */
-#ifndef DROPBEAR_X11FWD
 #define DROPBEAR_X11FWD 1
-#endif
 
 /* Enable TCP Fowarding */
 /* 'Local' is "-L" style (client listening port forwarded via server)
  * 'Remote' is "-R" style (server listening port forwarded via client) */
-#ifndef DROPBEAR_CLI_LOCALTCPFWD
 #define DROPBEAR_CLI_LOCALTCPFWD 1
-#endif
-#ifndef DROPBEAR_CLI_REMOTETCPFWD
 #define DROPBEAR_CLI_REMOTETCPFWD 1
-#endif
 
-#ifndef DROPBEAR_SVR_LOCALTCPFWD
 #define DROPBEAR_SVR_LOCALTCPFWD 1
-#endif
-#ifndef DROPBEAR_SVR_REMOTETCPFWD
 #define DROPBEAR_SVR_REMOTETCPFWD 1
-#endif
 
 /* Enable Authentication Agent Forwarding */
-#ifndef DROPBEAR_SVR_AGENTFWD
 #define DROPBEAR_SVR_AGENTFWD 1
-#endif
-#ifndef DROPBEAR_CLI_AGENTFWD
 #define DROPBEAR_CLI_AGENTFWD 1
-#endif
 
 /* Note: Both DROPBEAR_CLI_PROXYCMD and DROPBEAR_CLI_NETCAT must be set to
  * allow multihop dbclient connections */
 
 /* Allow using -J <proxycommand> to run the connection through a 
    pipe to a program, rather the normal TCP connection */
-#ifndef DROPBEAR_CLI_PROXYCMD
 #define DROPBEAR_CLI_PROXYCMD 1
-#endif
 
 /* Enable "Netcat mode" option. This will forward standard input/output
  * to a remote TCP-forwarded connection */
-#ifndef DROPBEAR_CLI_NETCAT
 #define DROPBEAR_CLI_NETCAT 1
-#endif
 
 /* Whether to support "-c" and "-m" flags to choose ciphers/MACs at runtime */
-#ifndef DROPBEAR_USER_ALGO_LIST
 #define DROPBEAR_USER_ALGO_LIST 1
-#endif
 
 /* Encryption - at least one required.
  * AES128 should be enabled, some very old implementations might only
  * support 3DES.
  * Including both AES keysize variants (128 and 256) will result in 
  * a minimal size increase */
-#ifndef DROPBEAR_AES128
 #define DROPBEAR_AES128 1
-#endif
-#ifndef DROPBEAR_3DES
 #define DROPBEAR_3DES 1
-#endif
-#ifndef DROPBEAR_AES256
 #define DROPBEAR_AES256 1
-#endif
-#ifndef DROPBEAR_TWOFISH256
 #define DROPBEAR_TWOFISH256 0
-#endif
-#ifndef DROPBEAR_TWOFISH128
 #define DROPBEAR_TWOFISH128 0
-#endif
 /* Compiling in Blowfish will add ~6kB to runtime heap memory usage */
-#ifndef DROPBEAR_BLOWFISH
 #define DROPBEAR_BLOWFISH 0
-#endif
 
 /* Enable CBC mode for ciphers. This has security issues though
  * is the most compatible with older SSH implementations */
-#ifndef DROPBEAR_ENABLE_CBC_MODE
 #define DROPBEAR_ENABLE_CBC_MODE 1
-#endif
 
 /* Enable "Counter Mode" for ciphers. This is more secure than
  * CBC mode against certain attacks. It is recommended for security
  * and forwards compatibility */
-#ifndef DROPBEAR_ENABLE_CTR_MODE
 #define DROPBEAR_ENABLE_CTR_MODE 1
-#endif
 
 /* Message integrity. sha2-256 is recommended as a default, 
    sha1 for compatibility */
-#ifndef DROPBEAR_SHA1_HMAC
 #define DROPBEAR_SHA1_HMAC 1
-#endif
-#ifndef DROPBEAR_SHA1_96_HMAC
 #define DROPBEAR_SHA1_96_HMAC 1
-#endif
-#ifndef DROPBEAR_SHA2_256_HMAC
 #define DROPBEAR_SHA2_256_HMAC 1
-#endif
 
 /* Hostkey/public key algorithms - at least one required, these are used
  * for hostkey as well as for verifying signatures with pubkey auth.
@@ -177,23 +110,15 @@
  * RSA is recommended
  * DSS may be necessary to connect to some systems though
    is not recommended for new keys */
-#ifndef DROPBEAR_RSA
 #define DROPBEAR_RSA 1
-#endif
-#ifndef DROPBEAR_DSS
 #define DROPBEAR_DSS 1
-#endif
 /* ECDSA is significantly faster than RSA or DSS. Compiling in ECC
  * code (either ECDSA or ECDH) increases binary size - around 30kB
  * on x86-64 */
-#ifndef DROPBEAR_ECDSA
 #define DROPBEAR_ECDSA 1
-#endif
 
 /* RSA must be >=1024 */
-#ifndef DROPBEAR_DEFAULT_RSA_SIZE
 #define DROPBEAR_DEFAULT_RSA_SIZE 2048
-#endif
 /* DSS is always 1024 */
 /* ECDSA defaults to largest size configured, usually 521 */
 
@@ -201,9 +126,7 @@
    connection using that key type occurs.
    This avoids the need to otherwise run "dropbearkey" and avoids some problems
    with badly seeded /dev/urandom when systems first boot. */
-#ifndef DROPBEAR_DELAY_HOSTKEY
 #define DROPBEAR_DELAY_HOSTKEY 1
-#endif
 
 
 /* Key exchange algorithm.
@@ -226,24 +149,12 @@
  * Small systems should generally include either curve25519 or ecdh for performance.
  * curve25519 is less widely supported but is faster
  */ 
-#ifndef DROPBEAR_DH_GROUP1
 #define DROPBEAR_DH_GROUP1 1
-#endif
-#ifndef DROPBEAR_DH_GROUP14_SHA1
 #define DROPBEAR_DH_GROUP14_SHA1 1
-#endif
-#ifndef DROPBEAR_DH_GROUP14_SHA256
 #define DROPBEAR_DH_GROUP14_SHA256 1
-#endif
-#ifndef DROPBEAR_DH_GROUP16
 #define DROPBEAR_DH_GROUP16 0
-#endif
-#ifndef DROPBEAR_CURVE25519
 #define DROPBEAR_CURVE25519 1
-#endif
-#ifndef DROPBEAR_ECDH
 #define DROPBEAR_ECDH 1
-#endif
 
 /* Control the memory/performance/compression tradeoff for zlib.
  * Set windowBits=8 for least memory usage, see your system's
@@ -252,28 +163,18 @@
  * windowBits=8 will use 129kB for compression.
  * Both modes will use ~35kB for decompression (using windowBits=15 for
  * interoperability) */
-#ifndef DROPBEAR_ZLIB_WINDOW_BITS
 #define DROPBEAR_ZLIB_WINDOW_BITS 15 
-#endif
 
 /* Whether to do reverse DNS lookups. */
-#ifndef DO_HOST_LOOKUP
 #define DO_HOST_LOOKUP 0
-#endif
 
 /* Whether to print the message of the day (MOTD). */
-#ifndef DO_MOTD
 #define DO_MOTD 0
-#endif
-#ifndef MOTD_FILENAME
 #define MOTD_FILENAME "/etc/motd"
-#endif
 
 /* Authentication Types - at least one required.
    RFC Draft requires pubkey auth, and recommends password */
-#ifndef DROPBEAR_SVR_PASSWORD_AUTH
 #define DROPBEAR_SVR_PASSWORD_AUTH 1
-#endif
 
 /* Note: PAM auth is quite simple and only works for PAM modules which just do
  * a simple "Login: " "Password: " (you can edit the strings in svr-authpam.c).
@@ -281,119 +182,79 @@
  * but there's an interface via a PAM module. It won't work for more complex
  * PAM challenge/response.
  * You can't enable both PASSWORD and PAM. */
-#ifndef DROPBEAR_SVR_PAM_AUTH
 #define DROPBEAR_SVR_PAM_AUTH 0
-#endif
 
 /* ~/.ssh/authorized_keys authentication */
-#ifndef DROPBEAR_SVR_PUBKEY_AUTH
 #define DROPBEAR_SVR_PUBKEY_AUTH 1
-#endif
 
 /* Whether to take public key options in 
  * authorized_keys file into account */
-#ifndef DROPBEAR_SVR_PUBKEY_OPTIONS
 #define DROPBEAR_SVR_PUBKEY_OPTIONS 1
-#endif
 
 /* Client authentication options */
-#ifndef DROPBEAR_CLI_PASSWORD_AUTH
 #define DROPBEAR_CLI_PASSWORD_AUTH 1
-#endif
-#ifndef DROPBEAR_CLI_PUBKEY_AUTH
 #define DROPBEAR_CLI_PUBKEY_AUTH 1
-#endif
 
 /* A default argument for dbclient -i <privatekey>. 
 Homedir is prepended unless path begins with / */
-#ifndef DROPBEAR_DEFAULT_CLI_AUTHKEY
 #define DROPBEAR_DEFAULT_CLI_AUTHKEY ".ssh/id_dropbear"
-#endif
 
 /* Allow specifying the password for dbclient via the DROPBEAR_PASSWORD
  * environment variable. */
-#ifndef DROPBEAR_USE_PASSWORD_ENV
 #define DROPBEAR_USE_PASSWORD_ENV 1
-#endif
 
 /* Define this (as well as DROPBEAR_CLI_PASSWORD_AUTH) to allow the use of
  * a helper program for the ssh client. The helper program should be
  * specified in the SSH_ASKPASS environment variable, and dbclient
  * should be run with DISPLAY set and no tty. The program should
  * return the password on standard output */
-#ifndef DROPBEAR_CLI_ASKPASS_HELPER
 #define DROPBEAR_CLI_ASKPASS_HELPER 0
-#endif
 
 /* Save a network roundtrip by sendng a real auth request immediately after
  * sending a query for the available methods. This is not yet enabled by default 
  since it could cause problems with non-compliant servers */ 
-#ifndef DROPBEAR_CLI_IMMEDIATE_AUTH
 #define DROPBEAR_CLI_IMMEDIATE_AUTH 0
-#endif
 
 /* Set this to use PRNGD or EGD instead of /dev/urandom */
-#ifndef DROPBEAR_USE_PRNGD
 #define DROPBEAR_USE_PRNGD 0
-#endif
-#ifndef DROPBEAR_PRNGD_SOCKET
 #define DROPBEAR_PRNGD_SOCKET "/var/run/dropbear-rng"
-#endif
 
 /* Specify the number of clients we will allow to be connected but
  * not yet authenticated. After this limit, connections are rejected */
 /* The first setting is per-IP, to avoid denial of service */
-#ifndef MAX_UNAUTH_PER_IP
 #define MAX_UNAUTH_PER_IP 5
-#endif
 
 /* And then a global limit to avoid chewing memory if connections 
  * come from many IPs */
-#ifndef MAX_UNAUTH_CLIENTS
 #define MAX_UNAUTH_CLIENTS 30
-#endif
 
 /* Default maximum number of failed authentication tries (server option) */
 /* -T server option overrides */
-#ifndef MAX_AUTH_TRIES
 #define MAX_AUTH_TRIES 10
-#endif
 
 /* The default file to store the daemon's process ID, for shutdown
    scripts etc. This can be overridden with the -P flag */
-#ifndef DROPBEAR_PIDFILE
 #define DROPBEAR_PIDFILE "/var/run/dropbear.pid"
-#endif
 
 /* The command to invoke for xauth when using X11 forwarding.
  * "-q" for quiet */
-#ifndef XAUTH_COMMAND
 #define XAUTH_COMMAND "/usr/bin/xauth -q"
-#endif
 
 
 /* if you want to enable running an sftp server (such as the one included with
  * OpenSSH), set the path below and set DROPBEAR_SFTPSERVER. 
  * The sftp-server program is not provided by Dropbear itself */
-#ifndef DROPBEAR_SFTPSERVER
 #define DROPBEAR_SFTPSERVER 1
-#endif
-#ifndef SFTPSERVER_PATH
 #define SFTPSERVER_PATH "/usr/libexec/sftp-server"
-#endif
 
 /* This is used by the scp binary when used as a client binary. If you're
  * not using the Dropbear client, you'll need to change it */
-#ifndef DROPBEAR_PATH_SSH_PROGRAM
 #define DROPBEAR_PATH_SSH_PROGRAM "/usr/bin/dbclient"
-#endif
 
 /* Whether to log commands executed by a client. This only logs the 
  * (single) command sent to the server, not what a user did in a 
  * shell/sftp session etc. */
-#ifndef LOG_COMMANDS
 #define LOG_COMMANDS 0
-#endif
 
 /* Window size limits. These tend to be a trade-off between memory
    usage and network performance: */
@@ -402,42 +263,28 @@
    significant difference to network performance. 24kB was empirically
    chosen for a 100mbit ethernet network. The value can be altered at
    runtime with the -W argument. */
-#ifndef DEFAULT_RECV_WINDOW
 #define DEFAULT_RECV_WINDOW 24576
-#endif
 /* Maximum size of a received SSH data packet - this _MUST_ be >= 32768
    in order to interoperate with other implementations */
-#ifndef RECV_MAX_PAYLOAD_LEN
 #define RECV_MAX_PAYLOAD_LEN 32768
-#endif
 /* Maximum size of a transmitted data packet - this can be any value,
    though increasing it may not make a significant difference. */
-#ifndef TRANS_MAX_PAYLOAD_LEN
 #define TRANS_MAX_PAYLOAD_LEN 16384
-#endif
 
 /* Ensure that data is transmitted every KEEPALIVE seconds. This can
 be overridden at runtime with -K. 0 disables keepalives */
-#ifndef DEFAULT_KEEPALIVE
 #define DEFAULT_KEEPALIVE 0
-#endif
 
 /* If this many KEEPALIVES are sent with no packets received from the
 other side, exit. Not run-time configurable - if you have a need
 for runtime configuration please mail the Dropbear list */
-#ifndef DEFAULT_KEEPALIVE_LIMIT
 #define DEFAULT_KEEPALIVE_LIMIT 3
-#endif
 
 /* Ensure that data is received within IDLE_TIMEOUT seconds. This can
 be overridden at runtime with -I. 0 disables idle timeouts */
-#ifndef DEFAULT_IDLE_TIMEOUT
 #define DEFAULT_IDLE_TIMEOUT 0
-#endif
 
 /* The default path. This will often get replaced by the shell */
-#ifndef DEFAULT_PATH
 #define DEFAULT_PATH "/usr/bin:/bin"
-#endif
 
 #endif /* DROPBEAR_DEFAULT_OPTIONS_H_ */
--- a/default_options.h.in	Sun Feb 18 23:48:32 2018 +0800
+++ /dev/null	Thu Jan 01 00:00:00 1970 +0000
@@ -1,290 +0,0 @@
-#ifndef DROPBEAR_DEFAULT_OPTIONS_H_
-#define DROPBEAR_DEFAULT_OPTIONS_H_
-/*
-                     > > > Read This < < <
-
-default_options.h.in  documents compile-time options, and provides default values.
-
-Local customisation should be added to localoptions.h which is
-used if it exists. Options defined there will override any options in this
-file.
-
-Options can also be defined with -DDROPBEAR_XXX=[0,1] in Makefile CFLAGS
-
-IMPORTANT: Some options will require "make clean" after changes */
-
-#define DROPBEAR_DEFPORT "22"
-
-/* Listen on all interfaces */
-#define DROPBEAR_DEFADDRESS ""
-
-/* Default hostkey paths - these can be specified on the command line */
-#define DSS_PRIV_FILENAME "/etc/dropbear/dropbear_dss_host_key"
-#define RSA_PRIV_FILENAME "/etc/dropbear/dropbear_rsa_host_key"
-#define ECDSA_PRIV_FILENAME "/etc/dropbear/dropbear_ecdsa_host_key"
-
-/* Set NON_INETD_MODE if you require daemon functionality (ie Dropbear listens
- * on chosen ports and keeps accepting connections. This is the default.
- *
- * Set INETD_MODE if you want to be able to run Dropbear with inetd (or
- * similar), where it will use stdin/stdout for connections, and each process
- * lasts for a single connection. Dropbear should be invoked with the -i flag
- * for inetd, and can only accept IPv4 connections.
- *
- * Both of these flags can be defined at once, don't compile without at least
- * one of them. */
-#define NON_INETD_MODE 1
-#define INETD_MODE 1
-
-/* Include verbose debug output, enabled with -v at runtime. 
- * This will add a reasonable amount to your executable size. */
-#define DEBUG_TRACE 0
-
-/* Set this if you want to use the DROPBEAR_SMALL_CODE option. This can save
- * several kB in binary size however will make the symmetrical ciphers and hashes
- * slower, perhaps by 50%. Recommended for small systems that aren't doing
- * much traffic. */
-#define DROPBEAR_SMALL_CODE 1
-
-/* Enable X11 Forwarding - server only */
-#define DROPBEAR_X11FWD 1
-
-/* Enable TCP Fowarding */
-/* 'Local' is "-L" style (client listening port forwarded via server)
- * 'Remote' is "-R" style (server listening port forwarded via client) */
-#define DROPBEAR_CLI_LOCALTCPFWD 1
-#define DROPBEAR_CLI_REMOTETCPFWD 1
-
-#define DROPBEAR_SVR_LOCALTCPFWD 1
-#define DROPBEAR_SVR_REMOTETCPFWD 1
-
-/* Enable Authentication Agent Forwarding */
-#define DROPBEAR_SVR_AGENTFWD 1
-#define DROPBEAR_CLI_AGENTFWD 1
-
-/* Note: Both DROPBEAR_CLI_PROXYCMD and DROPBEAR_CLI_NETCAT must be set to
- * allow multihop dbclient connections */
-
-/* Allow using -J <proxycommand> to run the connection through a 
-   pipe to a program, rather the normal TCP connection */
-#define DROPBEAR_CLI_PROXYCMD 1
-
-/* Enable "Netcat mode" option. This will forward standard input/output
- * to a remote TCP-forwarded connection */
-#define DROPBEAR_CLI_NETCAT 1
-
-/* Whether to support "-c" and "-m" flags to choose ciphers/MACs at runtime */
-#define DROPBEAR_USER_ALGO_LIST 1
-
-/* Encryption - at least one required.
- * AES128 should be enabled, some very old implementations might only
- * support 3DES.
- * Including both AES keysize variants (128 and 256) will result in 
- * a minimal size increase */
-#define DROPBEAR_AES128 1
-#define DROPBEAR_3DES 1
-#define DROPBEAR_AES256 1
-#define DROPBEAR_TWOFISH256 0
-#define DROPBEAR_TWOFISH128 0
-/* Compiling in Blowfish will add ~6kB to runtime heap memory usage */
-#define DROPBEAR_BLOWFISH 0
-
-/* Enable CBC mode for ciphers. This has security issues though
- * is the most compatible with older SSH implementations */
-#define DROPBEAR_ENABLE_CBC_MODE 1
-
-/* Enable "Counter Mode" for ciphers. This is more secure than
- * CBC mode against certain attacks. It is recommended for security
- * and forwards compatibility */
-#define DROPBEAR_ENABLE_CTR_MODE 1
-
-/* Message integrity. sha2-256 is recommended as a default, 
-   sha1 for compatibility */
-#define DROPBEAR_SHA1_HMAC 1
-#define DROPBEAR_SHA1_96_HMAC 1
-#define DROPBEAR_SHA2_256_HMAC 1
-
-/* Hostkey/public key algorithms - at least one required, these are used
- * for hostkey as well as for verifying signatures with pubkey auth.
- * Removing either of these won't save very much space.
- * RSA is recommended
- * DSS may be necessary to connect to some systems though
-   is not recommended for new keys */
-#define DROPBEAR_RSA 1
-#define DROPBEAR_DSS 1
-/* ECDSA is significantly faster than RSA or DSS. Compiling in ECC
- * code (either ECDSA or ECDH) increases binary size - around 30kB
- * on x86-64 */
-#define DROPBEAR_ECDSA 1
-
-/* RSA must be >=1024 */
-#define DROPBEAR_DEFAULT_RSA_SIZE 2048
-/* DSS is always 1024 */
-/* ECDSA defaults to largest size configured, usually 521 */
-
-/* Add runtime flag "-R" to generate hostkeys as-needed when the first 
-   connection using that key type occurs.
-   This avoids the need to otherwise run "dropbearkey" and avoids some problems
-   with badly seeded /dev/urandom when systems first boot. */
-#define DROPBEAR_DELAY_HOSTKEY 1
-
-
-/* Key exchange algorithm.
-
- * group14_sha1 - 2048 bit, sha1
- * group14_sha256 - 2048 bit, sha2-256
- * group16 - 4096 bit, sha2-512
- * group1 - 1024 bit, sha1
- * curve25519 - elliptic curve DH
- * ecdh - NIST elliptic curve DH (256, 384, 521)
- *
- * group1 is too small for security though is necessary if you need 
-     compatibility with some implementations such as Dropbear versions < 0.53
- * group14 is supported by most implementations.
- * group16 provides a greater strength level but is slower and increases binary size
- * curve25519 and ecdh algorithms are faster than non-elliptic curve methods
- * curve25519 increases binary size by ~8kB on x86-64
- * including either ECDH or ECDSA increases binary size by ~30kB on x86-64
-
- * Small systems should generally include either curve25519 or ecdh for performance.
- * curve25519 is less widely supported but is faster
- */ 
-#define DROPBEAR_DH_GROUP1 1
-#define DROPBEAR_DH_GROUP14_SHA1 1
-#define DROPBEAR_DH_GROUP14_SHA256 1
-#define DROPBEAR_DH_GROUP16 0
-#define DROPBEAR_CURVE25519 1
-#define DROPBEAR_ECDH 1
-
-/* Control the memory/performance/compression tradeoff for zlib.
- * Set windowBits=8 for least memory usage, see your system's
- * zlib.h for full details.
- * Default settings (windowBits=15) will use 256kB for compression
- * windowBits=8 will use 129kB for compression.
- * Both modes will use ~35kB for decompression (using windowBits=15 for
- * interoperability) */
-#define DROPBEAR_ZLIB_WINDOW_BITS 15 
-
-/* Whether to do reverse DNS lookups. */
-#define DO_HOST_LOOKUP 0
-
-/* Whether to print the message of the day (MOTD). */
-#define DO_MOTD 0
-#define MOTD_FILENAME "/etc/motd"
-
-/* Authentication Types - at least one required.
-   RFC Draft requires pubkey auth, and recommends password */
-#define DROPBEAR_SVR_PASSWORD_AUTH 1
-
-/* Note: PAM auth is quite simple and only works for PAM modules which just do
- * a simple "Login: " "Password: " (you can edit the strings in svr-authpam.c).
- * It's useful for systems like OS X where standard password crypts don't work
- * but there's an interface via a PAM module. It won't work for more complex
- * PAM challenge/response.
- * You can't enable both PASSWORD and PAM. */
-#define DROPBEAR_SVR_PAM_AUTH 0
-
-/* ~/.ssh/authorized_keys authentication */
-#define DROPBEAR_SVR_PUBKEY_AUTH 1
-
-/* Whether to take public key options in 
- * authorized_keys file into account */
-#define DROPBEAR_SVR_PUBKEY_OPTIONS 1
-
-/* Client authentication options */
-#define DROPBEAR_CLI_PASSWORD_AUTH 1
-#define DROPBEAR_CLI_PUBKEY_AUTH 1
-
-/* A default argument for dbclient -i <privatekey>. 
-Homedir is prepended unless path begins with / */
-#define DROPBEAR_DEFAULT_CLI_AUTHKEY ".ssh/id_dropbear"
-
-/* Allow specifying the password for dbclient via the DROPBEAR_PASSWORD
- * environment variable. */
-#define DROPBEAR_USE_PASSWORD_ENV 1
-
-/* Define this (as well as DROPBEAR_CLI_PASSWORD_AUTH) to allow the use of
- * a helper program for the ssh client. The helper program should be
- * specified in the SSH_ASKPASS environment variable, and dbclient
- * should be run with DISPLAY set and no tty. The program should
- * return the password on standard output */
-#define DROPBEAR_CLI_ASKPASS_HELPER 0
-
-/* Save a network roundtrip by sendng a real auth request immediately after
- * sending a query for the available methods. This is not yet enabled by default 
- since it could cause problems with non-compliant servers */ 
-#define DROPBEAR_CLI_IMMEDIATE_AUTH 0
-
-/* Set this to use PRNGD or EGD instead of /dev/urandom */
-#define DROPBEAR_USE_PRNGD 0
-#define DROPBEAR_PRNGD_SOCKET "/var/run/dropbear-rng"
-
-/* Specify the number of clients we will allow to be connected but
- * not yet authenticated. After this limit, connections are rejected */
-/* The first setting is per-IP, to avoid denial of service */
-#define MAX_UNAUTH_PER_IP 5
-
-/* And then a global limit to avoid chewing memory if connections 
- * come from many IPs */
-#define MAX_UNAUTH_CLIENTS 30
-
-/* Default maximum number of failed authentication tries (server option) */
-/* -T server option overrides */
-#define MAX_AUTH_TRIES 10
-
-/* The default file to store the daemon's process ID, for shutdown
-   scripts etc. This can be overridden with the -P flag */
-#define DROPBEAR_PIDFILE "/var/run/dropbear.pid"
-
-/* The command to invoke for xauth when using X11 forwarding.
- * "-q" for quiet */
-#define XAUTH_COMMAND "/usr/bin/xauth -q"
-
-
-/* if you want to enable running an sftp server (such as the one included with
- * OpenSSH), set the path below and set DROPBEAR_SFTPSERVER. 
- * The sftp-server program is not provided by Dropbear itself */
-#define DROPBEAR_SFTPSERVER 1
-#define SFTPSERVER_PATH "/usr/libexec/sftp-server"
-
-/* This is used by the scp binary when used as a client binary. If you're
- * not using the Dropbear client, you'll need to change it */
-#define DROPBEAR_PATH_SSH_PROGRAM "/usr/bin/dbclient"
-
-/* Whether to log commands executed by a client. This only logs the 
- * (single) command sent to the server, not what a user did in a 
- * shell/sftp session etc. */
-#define LOG_COMMANDS 0
-
-/* Window size limits. These tend to be a trade-off between memory
-   usage and network performance: */
-/* Size of the network receive window. This amount of memory is allocated
-   as a per-channel receive buffer. Increasing this value can make a
-   significant difference to network performance. 24kB was empirically
-   chosen for a 100mbit ethernet network. The value can be altered at
-   runtime with the -W argument. */
-#define DEFAULT_RECV_WINDOW 24576
-/* Maximum size of a received SSH data packet - this _MUST_ be >= 32768
-   in order to interoperate with other implementations */
-#define RECV_MAX_PAYLOAD_LEN 32768
-/* Maximum size of a transmitted data packet - this can be any value,
-   though increasing it may not make a significant difference. */
-#define TRANS_MAX_PAYLOAD_LEN 16384
-
-/* Ensure that data is transmitted every KEEPALIVE seconds. This can
-be overridden at runtime with -K. 0 disables keepalives */
-#define DEFAULT_KEEPALIVE 0
-
-/* If this many KEEPALIVES are sent with no packets received from the
-other side, exit. Not run-time configurable - if you have a need
-for runtime configuration please mail the Dropbear list */
-#define DEFAULT_KEEPALIVE_LIMIT 3
-
-/* Ensure that data is received within IDLE_TIMEOUT seconds. This can
-be overridden at runtime with -I. 0 disables idle timeouts */
-#define DEFAULT_IDLE_TIMEOUT 0
-
-/* The default path. This will often get replaced by the shell */
-#define DEFAULT_PATH "/usr/bin:/bin"
-
-#endif /* DROPBEAR_DEFAULT_OPTIONS_H_ */
--- a/ifndef_wrapper.sh	Sun Feb 18 23:48:32 2018 +0800
+++ b/ifndef_wrapper.sh	Mon Feb 19 22:16:50 2018 +0800
@@ -2,6 +2,6 @@
 
 # Wrap all "#define X Y" with a #ifndef X...#endif"
 
-sed -E 's/^(#define ([^ ]+) .*)/#ifndef \2\
+sed -E 's/^( *#define ([^ ]+) .*)/#ifndef \2\
 \1\
 #endif/' 
--- a/options.h	Sun Feb 18 23:48:32 2018 +0800
+++ b/options.h	Mon Feb 19 22:16:50 2018 +0800
@@ -15,7 +15,8 @@
 #include "localoptions.h"
 #endif
 
-#include "default_options.h"
+/* default_options.h is processed to add #ifndef guards */
+#include "default_options_guard.h"
 
 /* Some other defines that mostly should be left alone are defined
  * in sysoptions.h */