--- a/common-channel.c	Sun Mar 26 13:18:30 2006 +0000
+++ b/common-channel.c	Mon Mar 27 08:36:44 2006 +0000
@@ -883,6 +883,7 @@
 }
 
 #if defined(USING_LISTENERS) || defined(DROPBEAR_CLIENT)
+matterror
 /* Create a new channel, and start the open request. This is intended
  * for X11, agent, tcp forwarding, and should be filled with channel-specific
  * options, with the calling function calling encrypt_packet() after

--- a/common-chansession.c	Sun Mar 26 13:18:30 2006 +0000
+++ b/common-chansession.c	Mon Mar 27 08:36:44 2006 +0000
@@ -25,6 +25,7 @@
 #include "chansession.h"
 
 /* Mapping of signal values to ssh signal strings */
+#if 0
 const struct SigMap signames[] = {
 	{SIGABRT, "ABRT"},
 	{SIGALRM, "ALRM"},
@@ -41,3 +42,4 @@
 	{SIGUSR2, "USR2"},
 	{0, NULL}
 };
+#endif

--- a/debug.h	Sun Mar 26 13:18:30 2006 +0000
+++ b/debug.h	Mon Mar 27 08:36:44 2006 +0000
@@ -39,7 +39,7 @@
  * Caution: Don't use this in an unfriendly environment (ie unfirewalled),
  * since the printing may not sanitise strings etc. This will add a reasonable
  * amount to your executable size. */
-#define DEBUG_TRACE
+//#define DEBUG_TRACE
 
 /* All functions writing to the cleartext payload buffer call
  * CHECKCLEARTOWRITE() before writing. This is only really useful if you're

--- a/libtomcrypt/src/misc/error_to_string.c	Sun Mar 26 13:18:30 2006 +0000
+++ b/libtomcrypt/src/misc/error_to_string.c	Mon Mar 27 08:36:44 2006 +0000
@@ -16,6 +16,7 @@
   Convert error codes to ASCII strings, Tom St Denis
 */
 
+#if 0
 static const char *err_2_str[] =
 {
    "CRYPT_OK",
@@ -67,6 +68,12 @@
       return err_2_str[err];
    }   
 }
+#endif
+const char *error_to_string(int err)
+{
+	static *ret = "";
+	return  ret;
+}
 
 
 /* $Source: /cvs/libtom/libtomcrypt/src/misc/error_to_string.c,v $ */

--- a/options.h	Sun Mar 26 13:18:30 2006 +0000
+++ b/options.h	Mon Mar 27 08:36:44 2006 +0000
@@ -39,7 +39,7 @@
  *
  * Both of these flags can be defined at once, don't compile without at least
  * one of them. */
-#define NON_INETD_MODE
+//#define NON_INETD_MODE
 #define INETD_MODE
 
 /* Setting this disables the fast exptmod bignum code. It saves ~5kB, but is
@@ -59,14 +59,14 @@
 /* 'Local' is "-L" style (client listening port forwarded via server)
  * 'Remote' is "-R" style (server listening port forwarded via client) */
 
-#define ENABLE_CLI_LOCALTCPFWD
-#define ENABLE_CLI_REMOTETCPFWD
+//#define ENABLE_CLI_LOCALTCPFWD
+//#define ENABLE_CLI_REMOTETCPFWD
 
-#define ENABLE_SVR_LOCALTCPFWD
-#define ENABLE_SVR_REMOTETCPFWD
+//#define ENABLE_SVR_LOCALTCPFWD
+//#define ENABLE_SVR_REMOTETCPFWD
 
 /* Enable Authentication Agent Forwarding - server only for now */
-#define ENABLE_AGENTFWD
+//#define ENABLE_AGENTFWD
 
 /* Encryption - at least one required.
  * RFC Draft requires 3DES and recommends AES128 for interoperability.
@@ -99,7 +99,7 @@
  * for hostkey as well as for verifying signatures with pubkey auth.
  * Removing either of these won't save very much space.
  * SSH2 RFC Draft requires dss, recommends rsa */
-#define DROPBEAR_RSA
+//#define DROPBEAR_RSA
 #define DROPBEAR_DSS
 
 /* RSA can be vulnerable to timing attacks which use the time required for
@@ -136,11 +136,11 @@
 
 #define ENABLE_SVR_PASSWORD_AUTH
 /* #define ENABLE_SVR_PAM_AUTH */ /* requires ./configure --enable-pam */
-#define ENABLE_SVR_PUBKEY_AUTH
+//#define ENABLE_SVR_PUBKEY_AUTH
 
 #define ENABLE_CLI_PASSWORD_AUTH
-#define ENABLE_CLI_PUBKEY_AUTH
-#define ENABLE_CLI_INTERACT_AUTH
+//#define ENABLE_CLI_PUBKEY_AUTH
+//#define ENABLE_CLI_INTERACT_AUTH
 
 /* Define this (as well as ENABLE_CLI_PASSWORD_AUTH) to allow the use of
  * a helper program for the ssh client. The helper program should be
@@ -199,7 +199,7 @@
  * OpenSSH), set the path below. If the path isn't defined, sftp will not
  * be enabled */
 #ifndef SFTPSERVER_PATH
-#define SFTPSERVER_PATH "/usr/libexec/sftp-server"
+//#define SFTPSERVER_PATH "/usr/libexec/sftp-server"
 #endif
 
 /* This is used by the scp binary when used as a client binary. If you're

--- a/svr-chansession.c	Sun Mar 26 13:18:30 2006 +0000
+++ b/svr-chansession.c	Mon Mar 27 08:36:44 2006 +0000
@@ -131,6 +131,7 @@
 	TRACE(("leave sigchld handler"))
 }
 
+#if 0
 /* send the exit status or the signal causing termination for a session */
 /* XXX server */
 static void send_exitsignalstatus(struct Channel *channel) {
@@ -201,6 +202,7 @@
 
 	encrypt_packet();
 }
+#endif
 
 /* set up a session channel */
 static int newchansess(struct Channel *channel) {
@@ -248,7 +250,9 @@
 
 	chansess = (struct ChanSess*)channel->typedata;
 
+#if 0
 	send_exitsignalstatus(channel);
+#endif
 
 	TRACE(("enter closechansess"))
 	if (chansess == NULL) {
@@ -259,6 +263,7 @@
 	m_free(chansess->cmd);
 	m_free(chansess->term);
 
+#if 0
 	if (chansess->tty) {
 		/* write the utmp/wtmp login record */
 		li = login_alloc_entry(chansess->pid, ses.authstate.username,
@@ -269,6 +274,7 @@
 		pty_release(chansess->tty);
 		m_free(chansess->tty);
 	}
+#endif
 
 #ifndef DISABLE_X11FWD
 	x11cleanup(chansess);
@@ -389,6 +395,7 @@
 
 /* Send a signal to a session's process as requested by the client*/
 static int sessionsignal(struct ChanSess *chansess) {
+#if 0
 
 	int sig = 0;
 	unsigned char* signame = NULL;
@@ -420,6 +427,7 @@
 	if (kill(chansess->pid, sig) < 0) {
 		return DROPBEAR_FAILURE;
 	} 
+#endif
 
 	return DROPBEAR_SUCCESS;
 }
@@ -428,6 +436,7 @@
  * client. Returns DROPBEAR_SUCCESS or DROPBEAR_FAILURE */
 static int sessionwinchange(struct ChanSess *chansess) {
 
+#if 0
 	int termc, termr, termw, termh;
 
 	if (chansess->master < 0) {
@@ -442,9 +451,11 @@
 	
 	pty_change_window_size(chansess->master, termr, termc, termw, termh);
 
-	return DROPBEAR_FAILURE;
+#endif
+	return DROPBEAR_SUCCESS;
 }
 
+#if 0
 static void get_termmodes(struct ChanSess *chansess) {
 
 	struct termios termio;
@@ -535,6 +546,7 @@
 	}
 	TRACE(("leave get_termmodes"))
 }
+#endif
 
 /* Set up a session pty which will be used to execute the shell or program.
  * The pty is allocated now, and kept for when the shell/program executes.
@@ -635,7 +647,7 @@
 		ret = noptycommand(channel, chansess);
 	} else {
 		/* want pty */
-		ret = ptycommand(channel, chansess);
+		//ret = ptycommand(channel, chansess);
 	}
 
 	if (ret == DROPBEAR_FAILURE) {
@@ -786,6 +798,7 @@
 /* Execute a command or shell within a pty environment, and set up
  * redirection as appropriate.
  * Returns DROPBEAR_SUCCESS or DROPBEAR_FAILURE */
+#if 0
 static int ptycommand(struct Channel *channel, struct ChanSess *chansess) {
 
 	pid_t pid;
@@ -832,12 +845,14 @@
 
 		close(chansess->slave);
 
+#if 0
 		/* write the utmp/wtmp login record - must be after changing the
 		 * terminal used for stdout with the dup2 above */
 		li= login_alloc_entry(getpid(), ses.authstate.username,
 				ses.remotehost, chansess->tty);
 		login_login(li);
 		login_free_entry(li);
+#endif
 
 		m_free(chansess->tty);
 
@@ -893,6 +908,7 @@
 	TRACE(("leave ptycommand"))
 	return DROPBEAR_SUCCESS;
 }
+#endif
 
 /* Add the pid of a child to the list for exit-handling */
 static void addchildpid(struct ChanSess *chansess, pid_t pid) {