changeset 290:94ee16f5b8a8

0.48 progress
author Matt Johnston <matt@ucc.asn.au>
date Thu, 09 Mar 2006 12:37:38 +0000
parents 497fddd4a94e
children 55a99934db87
files CHANGES README TODO libtommath/tommath.tex options.h svr-main.c
diffstat 6 files changed, 26 insertions(+), 10824 deletions(-) [+]
line wrap: on
line diff
--- a/CHANGES	Wed Mar 08 15:46:24 2006 +0000
+++ b/CHANGES	Thu Mar 09 12:37:38 2006 +0000
@@ -1,3 +1,26 @@
+0.48 - 
+
+- Check that the circular buffer is properly empty before
+  closing a channel, which could cause truncated transfers
+  (thanks to Tomas Vanek for helping track it down)
+
+- Implement per-IP pre-authentication connection limits 
+  (after some poking from Pablo Fernandez)
+
+- Exit gracefully if trying to connect to as SSH v1 server 
+  (reported by Rushi Lala)
+
+- Only read /dev/random once at startup when in non-inetd mode
+
+- Allow ctrl-c to close a dbclient password prompt (may
+  still have to press enter on some platforms)
+
+- Merged in uClinux patch for inetd mode
+
+- Updated to scp from OpenSSH 4.3p2 - fixes a security issue
+  where use of system() could cause users to execute arbitrary
+  code through malformed filenames, ref CVE-2006-0225
+
 0.47 - Thurs Dec 8 2005
 
 - SECURITY: fix for buffer allocation error in server code, could potentially
--- a/README	Wed Mar 08 15:46:24 2006 +0000
+++ b/README	Thu Mar 09 12:37:38 2006 +0000
@@ -25,7 +25,7 @@
 ssh-rsa AAAAB3NzaC1yc2EAAAABIwAAAIEAwVa6M6cGVmUcLl2cFzkxEoJd06Ub4bVDsYrWvXhvUV+ZAM9uGuewZBDoAqNKJxoIn0Hyd0Nk/yU99UVv6NWV/5YSHtnf35LKds56j7cuzoQpFIdjNwdxAN0PCET/MG8qyskG/2IE2DPNIaJ3Wy+Ws4IZEgdJgPlTYUBWWtCWOGc= someone@hostname
 
 You must make sure that ~/.ssh, and the key file, are only writable by the
-user.
+user. Beware of editors that split the key into multiple lines.
 
 NOTE: Dropbear ignores authorized_keys options such as those described in the
 OpenSSH sshd manpage, and will not allow a login for these keys. 
--- a/TODO	Wed Mar 08 15:46:24 2006 +0000
+++ b/TODO	Thu Mar 09 12:37:38 2006 +0000
@@ -6,8 +6,6 @@
 
 - Make options.h generated from configure perhaps?
 
-- Improved queueing of unauthed connections
-
 - handle /etc/environment in AIX
 
 - check that there aren't timing issues with valid/invalid user authentication
@@ -15,7 +13,6 @@
 
 - Binding to different interfaces
 
-- check PRNG
 - CTR mode
 - SSH_MSG_IGNORE sending to improve CBC security
 - DH Group Exchange possibly, or just add group14 (whatever it's called today)
--- a/libtommath/tommath.tex	Wed Mar 08 15:46:24 2006 +0000
+++ /dev/null	Thu Jan 01 00:00:00 1970 +0000
@@ -1,10814 +0,0 @@
-\documentclass[b5paper]{book}
-\usepackage{hyperref}
-\usepackage{makeidx}
-\usepackage{amssymb}
-\usepackage{color}
-\usepackage{alltt}
-\usepackage{graphicx}
-\usepackage{layout}
-\def\union{\cup}
-\def\intersect{\cap}
-\def\getsrandom{\stackrel{\rm R}{\gets}}
-\def\cross{\times}
-\def\cat{\hspace{0.5em} \| \hspace{0.5em}}
-\def\catn{$\|$}
-\def\divides{\hspace{0.3em} | \hspace{0.3em}}
-\def\nequiv{\not\equiv}
-\def\approx{\raisebox{0.2ex}{\mbox{\small $\sim$}}}
-\def\lcm{{\rm lcm}}
-\def\gcd{{\rm gcd}}
-\def\log{{\rm log}}
-\def\ord{{\rm ord}}
-\def\abs{{\mathit abs}}
-\def\rep{{\mathit rep}}
-\def\mod{{\mathit\ mod\ }}
-\renewcommand{\pmod}[1]{\ ({\rm mod\ }{#1})}
-\newcommand{\floor}[1]{\left\lfloor{#1}\right\rfloor}
-\newcommand{\ceil}[1]{\left\lceil{#1}\right\rceil}
-\def\Or{{\rm\ or\ }}
-\def\And{{\rm\ and\ }}
-\def\iff{\hspace{1em}\Longleftrightarrow\hspace{1em}}
-\def\implies{\Rightarrow}
-\def\undefined{{\rm ``undefined"}}
-\def\Proof{\vspace{1ex}\noindent {\bf Proof:}\hspace{1em}}
-\let\oldphi\phi
-\def\phi{\varphi}
-\def\Pr{{\rm Pr}}
-\newcommand{\str}[1]{{\mathbf{#1}}}
-\def\F{{\mathbb F}}
-\def\N{{\mathbb N}}
-\def\Z{{\mathbb Z}}
-\def\R{{\mathbb R}}
-\def\C{{\mathbb C}}
-\def\Q{{\mathbb Q}}
-\definecolor{DGray}{gray}{0.5}
-\newcommand{\emailaddr}[1]{\mbox{$<${#1}$>$}}
-\def\twiddle{\raisebox{0.3ex}{\mbox{\tiny $\sim$}}}
-\def\gap{\vspace{0.5ex}}
-\makeindex
-\begin{document}
-\frontmatter
-\pagestyle{empty}
-\title{Multi--Precision Math}
-\author{\mbox{
-%\begin{small}
-\begin{tabular}{c}
-Tom St Denis \\
-Algonquin College \\
-\\
-Mads Rasmussen \\
-Open Communications Security \\
-\\
-Greg Rose \\
-QUALCOMM Australia \\
-\end{tabular}
-%\end{small}
-}
-}
-\maketitle
-This text has been placed in the public domain.  This text corresponds to the v0.35 release of the 
-LibTomMath project.
-
-\begin{alltt}
-Tom St Denis
-111 Banning Rd
-Ottawa, Ontario
-K2L 1C3
-Canada
-
-Phone: 1-613-836-3160
-Email: [email protected]
-\end{alltt}
-
-This text is formatted to the international B5 paper size of 176mm wide by 250mm tall using the \LaTeX{} 
-{\em book} macro package and the Perl {\em booker} package.
-
-\tableofcontents
-\listoffigures
-\chapter*{Prefaces}
-When I tell people about my LibTom projects and that I release them as public domain they are often puzzled.  
-They ask why I did it and especially why I continue to work on them for free.  The best I can explain it is ``Because I can.''  
-Which seems odd and perhaps too terse for adult conversation. I often qualify it with ``I am able, I am willing.'' which 
-perhaps explains it better.  I am the first to admit there is not anything that special with what I have done.  Perhaps
-others can see that too and then we would have a society to be proud of.  My LibTom projects are what I am doing to give 
-back to society in the form of tools and knowledge that can help others in their endeavours.
-
-I started writing this book because it was the most logical task to further my goal of open academia.  The LibTomMath source
-code itself was written to be easy to follow and learn from.  There are times, however, where pure C source code does not
-explain the algorithms properly.  Hence this book.  The book literally starts with the foundation of the library and works
-itself outwards to the more complicated algorithms.  The use of both pseudo--code and verbatim source code provides a duality
-of ``theory'' and ``practice'' that the computer science students of the world shall appreciate.  I never deviate too far
-from relatively straightforward algebra and I hope that this book can be a valuable learning asset.
-
-This book and indeed much of the LibTom projects would not exist in their current form if it was not for a plethora
-of kind people donating their time, resources and kind words to help support my work.  Writing a text of significant
-length (along with the source code) is a tiresome and lengthy process.  Currently the LibTom project is four years old,
-comprises of literally thousands of users and over 100,000 lines of source code, TeX and other material.  People like Mads and Greg 
-were there at the beginning to encourage me to work well.  It is amazing how timely validation from others can boost morale to 
-continue the project. Definitely my parents were there for me by providing room and board during the many months of work in 2003.  
-
-To my many friends whom I have met through the years I thank you for the good times and the words of encouragement.  I hope I
-honour your kind gestures with this project.
-
-Open Source.  Open Academia.  Open Minds.
-
-\begin{flushright} Tom St Denis \end{flushright}
-
-\newpage
-I found the opportunity to work with Tom appealing for several reasons, not only could I broaden my own horizons, but also 
-contribute to educate others facing the problem of having to handle big number mathematical calculations.
-
-This book is Tom's child and he has been caring and fostering the project ever since the beginning with a clear mind of 
-how he wanted the project to turn out. I have helped by proofreading the text and we have had several discussions about 
-the layout and language used.
-
-I hold a masters degree in cryptography from the University of Southern Denmark and have always been interested in the 
-practical aspects of cryptography. 
-
-Having worked in the security consultancy business for several years in S\~{a}o Paulo, Brazil, I have been in touch with a 
-great deal of work in which multiple precision mathematics was needed. Understanding the possibilities for speeding up 
-multiple precision calculations is often very important since we deal with outdated machine architecture where modular 
-reductions, for example, become painfully slow.
-
-This text is for people who stop and wonder when first examining algorithms such as RSA for the first time and asks 
-themselves, ``You tell me this is only secure for large numbers, fine; but how do you implement these numbers?''
-
-\begin{flushright}
-Mads Rasmussen
-
-S\~{a}o Paulo - SP
-
-Brazil
-\end{flushright}
-
-\newpage
-It's all because I broke my leg. That just happened to be at about the same time that Tom asked for someone to review the section of the book about 
-Karatsuba multiplication. I was laid up, alone and immobile, and thought ``Why not?'' I vaguely knew what Karatsuba multiplication was, but not 
-really, so I thought I could help, learn, and stop myself from watching daytime cable TV, all at once.
-
-At the time of writing this, I've still not met Tom or Mads in meatspace. I've been following Tom's progress since his first splash on the 
-sci.crypt Usenet news group. I watched him go from a clueless newbie, to the cryptographic equivalent of a reformed smoker, to a real
-contributor to the field, over a period of about two years. I've been impressed with his obvious intelligence, and astounded by his productivity. 
-Of course, he's young enough to be my own child, so he doesn't have my problems with staying awake.
-
-When I reviewed that single section of the book, in its very earliest form, I was very pleasantly surprised. So I decided to collaborate more fully, 
-and at least review all of it, and perhaps write some bits too. There's still a long way to go with it, and I have watched a number of close 
-friends go through the mill of publication, so I think that the way to go is longer than Tom thinks it is. Nevertheless, it's a good effort, 
-and I'm pleased to be involved with it.
-
-\begin{flushright}
-Greg Rose, Sydney, Australia, June 2003. 
-\end{flushright}
-
-\mainmatter
-\pagestyle{headings}
-\chapter{Introduction}
-\section{Multiple Precision Arithmetic}
-
-\subsection{What is Multiple Precision Arithmetic?}
-When we think of long-hand arithmetic such as addition or multiplication we rarely consider the fact that we instinctively
-raise or lower the precision of the numbers we are dealing with.  For example, in decimal we almost immediate can 
-reason that $7$ times $6$ is $42$.  However, $42$ has two digits of precision as opposed to one digit we started with.  
-Further multiplications of say $3$ result in a larger precision result $126$.  In these few examples we have multiple 
-precisions for the numbers we are working with.  Despite the various levels of precision a single subset\footnote{With the occasional optimization.}
- of algorithms can be designed to accomodate them.  
-
-By way of comparison a fixed or single precision operation would lose precision on various operations.  For example, in
-the decimal system with fixed precision $6 \cdot 7 = 2$.
-
-Essentially at the heart of computer based multiple precision arithmetic are the same long-hand algorithms taught in
-schools to manually add, subtract, multiply and divide.  
-
-\subsection{The Need for Multiple Precision Arithmetic}
-The most prevalent need for multiple precision arithmetic, often referred to as ``bignum'' math, is within the implementation
-of public-key cryptography algorithms.   Algorithms such as RSA \cite{RSAREF} and Diffie-Hellman \cite{DHREF} require 
-integers of significant magnitude to resist known cryptanalytic attacks.  For example, at the time of this writing a 
-typical RSA modulus would be at least greater than $10^{309}$.  However, modern programming languages such as ISO C \cite{ISOC} and 
-Java \cite{JAVA} only provide instrinsic support for integers which are relatively small and single precision.
-
-\begin{figure}[!here]
-\begin{center}
-\begin{tabular}{|r|c|}
-\hline \textbf{Data Type} & \textbf{Range} \\
-\hline char  & $-128 \ldots 127$ \\
-\hline short & $-32768 \ldots 32767$ \\
-\hline long  & $-2147483648 \ldots 2147483647$ \\
-\hline long long & $-9223372036854775808 \ldots 9223372036854775807$ \\
-\hline
-\end{tabular}
-\end{center}
-\caption{Typical Data Types for the C Programming Language}
-\label{fig:ISOC}
-\end{figure}
-
-The largest data type guaranteed to be provided by the ISO C programming 
-language\footnote{As per the ISO C standard.  However, each compiler vendor is allowed to augment the precision as they 
-see fit.}  can only represent values up to $10^{19}$ as shown in figure \ref{fig:ISOC}. On its own the C language is 
-insufficient to accomodate the magnitude required for the problem at hand.  An RSA modulus of magnitude $10^{19}$ could be 
-trivially factored\footnote{A Pollard-Rho factoring would take only $2^{16}$ time.} on the average desktop computer, 
-rendering any protocol based on the algorithm insecure.  Multiple precision algorithms solve this very problem by 
-extending the range of representable integers while using single precision data types.
-
-Most advancements in fast multiple precision arithmetic stem from the need for faster and more efficient cryptographic 
-primitives.  Faster modular reduction and exponentiation algorithms such as Barrett's algorithm, which have appeared in 
-various cryptographic journals, can render algorithms such as RSA and Diffie-Hellman more efficient.  In fact, several 
-major companies such as RSA Security, Certicom and Entrust have built entire product lines on the implementation and 
-deployment of efficient algorithms.
-
-However, cryptography is not the only field of study that can benefit from fast multiple precision integer routines.  
-Another auxiliary use of multiple precision integers is high precision floating point data types.  
-The basic IEEE \cite{IEEE} standard floating point type is made up of an integer mantissa $q$, an exponent $e$ and a sign bit $s$.  
-Numbers are given in the form $n = q \cdot b^e \cdot -1^s$ where $b = 2$ is the most common base for IEEE.  Since IEEE 
-floating point is meant to be implemented in hardware the precision of the mantissa is often fairly small 
-(\textit{23, 48 and 64 bits}).  The mantissa is merely an integer and a multiple precision integer could be used to create
-a mantissa of much larger precision than hardware alone can efficiently support.  This approach could be useful where 
-scientific applications must minimize the total output error over long calculations.
-
-Yet another use for large integers is within arithmetic on polynomials of large characteristic (i.e. $GF(p)[x]$ for large $p$).
-In fact the library discussed within this text has already been used to form a polynomial basis library\footnote{See \url{http://poly.libtomcrypt.org} for more details.}.
-
-\subsection{Benefits of Multiple Precision Arithmetic}
-\index{precision}
-The benefit of multiple precision representations over single or fixed precision representations is that 
-no precision is lost while representing the result of an operation which requires excess precision.  For example, 
-the product of two $n$-bit integers requires at least $2n$ bits of precision to be represented faithfully.  A multiple 
-precision algorithm would augment the precision of the destination to accomodate the result while a single precision system 
-would truncate excess bits to maintain a fixed level of precision.
-
-It is possible to implement algorithms which require large integers with fixed precision algorithms.  For example, elliptic
-curve cryptography (\textit{ECC}) is often implemented on smartcards by fixing the precision of the integers to the maximum 
-size the system will ever need.  Such an approach can lead to vastly simpler algorithms which can accomodate the 
-integers required even if the host platform cannot natively accomodate them\footnote{For example, the average smartcard 
-processor has an 8 bit accumulator.}.  However, as efficient as such an approach may be, the resulting source code is not
-normally very flexible.  It cannot, at runtime, accomodate inputs of higher magnitude than the designer anticipated.
-
-Multiple precision algorithms have the most overhead of any style of arithmetic.  For the the most part the 
-overhead can be kept to a minimum with careful planning, but overall, it is not well suited for most memory starved
-platforms.  However, multiple precision algorithms do offer the most flexibility in terms of the magnitude of the 
-inputs.  That is, the same algorithms based on multiple precision integers can accomodate any reasonable size input 
-without the designer's explicit forethought.  This leads to lower cost of ownership for the code as it only has to 
-be written and tested once.
-
-\section{Purpose of This Text}
-The purpose of this text is to instruct the reader regarding how to implement efficient multiple precision algorithms.  
-That is to not only explain a limited subset of the core theory behind the algorithms but also the various ``house keeping'' 
-elements that are neglected by authors of other texts on the subject.  Several well reknowned texts \cite{TAOCPV2,HAC} 
-give considerably detailed explanations of the theoretical aspects of algorithms and often very little information 
-regarding the practical implementation aspects.  
-
-In most cases how an algorithm is explained and how it is actually implemented are two very different concepts.  For 
-example, the Handbook of Applied Cryptography (\textit{HAC}), algorithm 14.7 on page 594, gives a relatively simple 
-algorithm for performing multiple precision integer addition.  However, the description lacks any discussion concerning 
-the fact that the two integer inputs may be of differing magnitudes.  As a result the implementation is not as simple
-as the text would lead people to believe.  Similarly the division routine (\textit{algorithm 14.20, pp. 598}) does not 
-discuss how to handle sign or handle the dividend's decreasing magnitude in the main loop (\textit{step \#3}).
-
-Both texts also do not discuss several key optimal algorithms required such as ``Comba'' and Karatsuba multipliers 
-and fast modular inversion, which we consider practical oversights.  These optimal algorithms are vital to achieve 
-any form of useful performance in non-trivial applications.  
-
-To solve this problem the focus of this text is on the practical aspects of implementing a multiple precision integer
-package.  As a case study the ``LibTomMath''\footnote{Available at \url{http://math.libtomcrypt.org}} package is used 
-to demonstrate algorithms with real implementations\footnote{In the ISO C programming language.} that have been field 
-tested and work very well.  The LibTomMath library is freely available on the Internet for all uses and this text 
-discusses a very large portion of the inner workings of the library.
-
-The algorithms that are presented will always include at least one ``pseudo-code'' description followed 
-by the actual C source code that implements the algorithm.  The pseudo-code can be used to implement the same 
-algorithm in other programming languages as the reader sees fit.  
-
-This text shall also serve as a walkthrough of the creation of multiple precision algorithms from scratch.  Showing
-the reader how the algorithms fit together as well as where to start on various taskings.  
-
-\section{Discussion and Notation}
-\subsection{Notation}
-A multiple precision integer of $n$-digits shall be denoted as $x = (x_{n-1}, \ldots, x_1, x_0)_{ \beta }$ and represent
-the integer $x \equiv \sum_{i=0}^{n-1} x_i\beta^i$.  The elements of the array $x$ are said to be the radix $\beta$ digits 
-of the integer.  For example, $x = (1,2,3)_{10}$ would represent the integer 
-$1\cdot 10^2 + 2\cdot10^1 + 3\cdot10^0 = 123$.  
-
-\index{mp\_int}
-The term ``mp\_int'' shall refer to a composite structure which contains the digits of the integer it represents, as well 
-as auxilary data required to manipulate the data.  These additional members are discussed further in section 
-\ref{sec:MPINT}.  For the purposes of this text a ``multiple precision integer'' and an ``mp\_int'' are assumed to be 
-synonymous.  When an algorithm is specified to accept an mp\_int variable it is assumed the various auxliary data members 
-are present as well.  An expression of the type \textit{variablename.item} implies that it should evaluate to the 
-member named ``item'' of the variable.  For example, a string of characters may have a member ``length'' which would 
-evaluate to the number of characters in the string.  If the string $a$ equals ``hello'' then it follows that 
-$a.length = 5$.  
-
-For certain discussions more generic algorithms are presented to help the reader understand the final algorithm used
-to solve a given problem.  When an algorithm is described as accepting an integer input it is assumed the input is 
-a plain integer with no additional multiple-precision members.  That is, algorithms that use integers as opposed to 
-mp\_ints as inputs do not concern themselves with the housekeeping operations required such as memory management.  These 
-algorithms will be used to establish the relevant theory which will subsequently be used to describe a multiple
-precision algorithm to solve the same problem.  
-
-\subsection{Precision Notation}
-The variable $\beta$ represents the radix of a single digit of a multiple precision integer and 
-must be of the form $q^p$ for $q, p \in \Z^+$.  A single precision variable must be able to represent integers in 
-the range $0 \le x < q \beta$ while a double precision variable must be able to represent integers in the range 
-$0 \le x < q \beta^2$.  The extra radix-$q$ factor allows additions and subtractions to proceed without truncation of the 
-carry.  Since all modern computers are binary, it is assumed that $q$ is two.
-
-\index{mp\_digit} \index{mp\_word}
-Within the source code that will be presented for each algorithm, the data type \textbf{mp\_digit} will represent 
-a single precision integer type, while, the data type \textbf{mp\_word} will represent a double precision integer type.  In 
-several algorithms (notably the Comba routines) temporary results will be stored in arrays of double precision mp\_words.  
-For the purposes of this text $x_j$ will refer to the $j$'th digit of a single precision array and $\hat x_j$ will refer to 
-the $j$'th digit of a double precision array.  Whenever an expression is to be assigned to a double precision
-variable it is assumed that all single precision variables are promoted to double precision during the evaluation.  
-Expressions that are assigned to a single precision variable are truncated to fit within the precision of a single
-precision data type.
-
-For example, if $\beta = 10^2$ a single precision data type may represent a value in the 
-range $0 \le x < 10^3$, while a double precision data type may represent a value in the range $0 \le x < 10^5$.  Let
-$a = 23$ and $b = 49$ represent two single precision variables.  The single precision product shall be written
-as $c \leftarrow a \cdot b$ while the double precision product shall be written as $\hat c \leftarrow a \cdot b$.
-In this particular case, $\hat c = 1127$ and $c = 127$.  The most significant digit of the product would not fit 
-in a single precision data type and as a result $c \ne \hat c$.  
-
-\subsection{Algorithm Inputs and Outputs}
-Within the algorithm descriptions all variables are assumed to be scalars of either single or double precision
-as indicated.  The only exception to this rule is when variables have been indicated to be of type mp\_int.  This 
-distinction is important as scalars are often used as array indicies and various other counters.  
-
-\subsection{Mathematical Expressions}
-The $\lfloor \mbox{ } \rfloor$ brackets imply an expression truncated to an integer not greater than the expression 
-itself.  For example, $\lfloor 5.7 \rfloor = 5$.  Similarly the $\lceil \mbox{ } \rceil$ brackets imply an expression
-rounded to an integer not less than the expression itself.  For example, $\lceil 5.1 \rceil = 6$.  Typically when 
-the $/$ division symbol is used the intention is to perform an integer division with truncation.  For example, 
-$5/2 = 2$ which will often be written as $\lfloor 5/2 \rfloor = 2$ for clarity.  When an expression is written as a 
-fraction a real value division is implied, for example ${5 \over 2} = 2.5$.  
-
-The norm of a multiple precision integer, for example $\vert \vert x \vert \vert$, will be used to represent the number of digits in the representation
-of the integer.  For example, $\vert \vert 123 \vert \vert = 3$ and $\vert \vert 79452 \vert \vert = 5$.  
-
-\subsection{Work Effort}
-\index{big-Oh}
-To measure the efficiency of the specified algorithms, a modified big-Oh notation is used.  In this system all 
-single precision operations are considered to have the same cost\footnote{Except where explicitly noted.}.  
-That is a single precision addition, multiplication and division are assumed to take the same time to 
-complete.  While this is generally not true in practice, it will simplify the discussions considerably.
-
-Some algorithms have slight advantages over others which is why some constants will not be removed in 
-the notation.  For example, a normal baseline multiplication (section \ref{sec:basemult}) requires $O(n^2)$ work while a 
-baseline squaring (section \ref{sec:basesquare}) requires $O({{n^2 + n}\over 2})$ work.  In standard big-Oh notation these 
-would both be said to be equivalent to $O(n^2)$.  However, 
-in the context of the this text this is not the case as the magnitude of the inputs will typically be rather small.  As a 
-result small constant factors in the work effort will make an observable difference in algorithm efficiency.
-
-All of the algorithms presented in this text have a polynomial time work level.  That is, of the form 
-$O(n^k)$ for $n, k \in \Z^{+}$.  This will help make useful comparisons in terms of the speed of the algorithms and how 
-various optimizations will help pay off in the long run.
-
-\section{Exercises}
-Within the more advanced chapters a section will be set aside to give the reader some challenging exercises related to
-the discussion at hand.  These exercises are not designed to be prize winning problems, but instead to be thought 
-provoking.  Wherever possible the problems are forward minded, stating problems that will be answered in subsequent 
-chapters.  The reader is encouraged to finish the exercises as they appear to get a better understanding of the 
-subject material.  
-
-That being said, the problems are designed to affirm knowledge of a particular subject matter.  Students in particular
-are encouraged to verify they can answer the problems correctly before moving on.
-
-Similar to the exercises of \cite[pp. ix]{TAOCPV2} these exercises are given a scoring system based on the difficulty of
-the problem.  However, unlike \cite{TAOCPV2} the problems do not get nearly as hard.  The scoring of these 
-exercises ranges from one (the easiest) to five (the hardest).  The following table sumarizes the 
-scoring system used.
-
-\begin{figure}[here]
-\begin{center}
-\begin{small}
-\begin{tabular}{|c|l|}
-\hline $\left [ 1 \right ]$ & An easy problem that should only take the reader a manner of \\
-                            & minutes to solve.  Usually does not involve much computer time \\
-                            & to solve. \\
-\hline $\left [ 2 \right ]$ & An easy problem that involves a marginal amount of computer \\
-                     & time usage.  Usually requires a program to be written to \\
-                     & solve the problem. \\
-\hline $\left [ 3 \right ]$ & A moderately hard problem that requires a non-trivial amount \\
-                     & of work.  Usually involves trivial research and development of \\
-                     & new theory from the perspective of a student. \\
-\hline $\left [ 4 \right ]$ & A moderately hard problem that involves a non-trivial amount \\
-                     & of work and research, the solution to which will demonstrate \\
-                     & a higher mastery of the subject matter. \\
-\hline $\left [ 5 \right ]$ & A hard problem that involves concepts that are difficult for a \\
-                     & novice to solve.  Solutions to these problems will demonstrate a \\
-                     & complete mastery of the given subject. \\
-\hline
-\end{tabular}
-\end{small}
-\end{center}
-\caption{Exercise Scoring System}
-\end{figure}
-
-Problems at the first level are meant to be simple questions that the reader can answer quickly without programming a solution or
-devising new theory.  These problems are quick tests to see if the material is understood.  Problems at the second level 
-are also designed to be easy but will require a program or algorithm to be implemented to arrive at the answer.  These
-two levels are essentially entry level questions.  
-
-Problems at the third level are meant to be a bit more difficult than the first two levels.  The answer is often 
-fairly obvious but arriving at an exacting solution requires some thought and skill.  These problems will almost always 
-involve devising a new algorithm or implementing a variation of another algorithm previously presented.  Readers who can
-answer these questions will feel comfortable with the concepts behind the topic at hand.
-
-Problems at the fourth level are meant to be similar to those of the level three questions except they will require 
-additional research to be completed.  The reader will most likely not know the answer right away, nor will the text provide 
-the exact details of the answer until a subsequent chapter.  
-
-Problems at the fifth level are meant to be the hardest 
-problems relative to all the other problems in the chapter.  People who can correctly answer fifth level problems have a 
-mastery of the subject matter at hand.
-
-Often problems will be tied together.  The purpose of this is to start a chain of thought that will be discussed in future chapters.  The reader
-is encouraged to answer the follow-up problems and try to draw the relevance of problems.
-
-\section{Introduction to LibTomMath}
-
-\subsection{What is LibTomMath?}
-LibTomMath is a free and open source multiple precision integer library written entirely in portable ISO C.  By portable it 
-is meant that the library does not contain any code that is computer platform dependent or otherwise problematic to use on 
-any given platform.  
-
-The library has been successfully tested under numerous operating systems including Unix\footnote{All of these
-trademarks belong to their respective rightful owners.}, MacOS, Windows, Linux, PalmOS and on standalone hardware such 
-as the Gameboy Advance.  The library is designed to contain enough functionality to be able to develop applications such 
-as public key cryptosystems and still maintain a relatively small footprint.
-
-\subsection{Goals of LibTomMath}
-
-Libraries which obtain the most efficiency are rarely written in a high level programming language such as C.  However, 
-even though this library is written entirely in ISO C, considerable care has been taken to optimize the algorithm implementations within the 
-library.  Specifically the code has been written to work well with the GNU C Compiler (\textit{GCC}) on both x86 and ARM 
-processors.  Wherever possible, highly efficient algorithms, such as Karatsuba multiplication, sliding window 
-exponentiation and Montgomery reduction have been provided to make the library more efficient.  
-
-Even with the nearly optimal and specialized algorithms that have been included the Application Programing Interface 
-(\textit{API}) has been kept as simple as possible.  Often generic place holder routines will make use of specialized 
-algorithms automatically without the developer's specific attention.  One such example is the generic multiplication 
-algorithm \textbf{mp\_mul()} which will automatically use Toom--Cook, Karatsuba, Comba or baseline multiplication 
-based on the magnitude of the inputs and the configuration of the library.  
-
-Making LibTomMath as efficient as possible is not the only goal of the LibTomMath project.  Ideally the library should 
-be source compatible with another popular library which makes it more attractive for developers to use.  In this case the
-MPI library was used as a API template for all the basic functions.  MPI was chosen because it is another library that fits 
-in the same niche as LibTomMath.  Even though LibTomMath uses MPI as the template for the function names and argument 
-passing conventions, it has been written from scratch by Tom St Denis.
-
-The project is also meant to act as a learning tool for students, the logic being that no easy-to-follow ``bignum'' 
-library exists which can be used to teach computer science students how to perform fast and reliable multiple precision 
-integer arithmetic.  To this end the source code has been given quite a few comments and algorithm discussion points.  
-
-\section{Choice of LibTomMath}
-LibTomMath was chosen as the case study of this text not only because the author of both projects is one and the same but
-for more worthy reasons.  Other libraries such as GMP \cite{GMP}, MPI \cite{MPI}, LIP \cite{LIP} and OpenSSL 
-\cite{OPENSSL} have multiple precision integer arithmetic routines but would not be ideal for this text for 
-reasons that will be explained in the following sub-sections.
-
-\subsection{Code Base}
-The LibTomMath code base is all portable ISO C source code.  This means that there are no platform dependent conditional
-segments of code littered throughout the source.  This clean and uncluttered approach to the library means that a
-developer can more readily discern the true intent of a given section of source code without trying to keep track of
-what conditional code will be used.
-
-The code base of LibTomMath is well organized.  Each function is in its own separate source code file 
-which allows the reader to find a given function very quickly.  On average there are $76$ lines of code per source
-file which makes the source very easily to follow.  By comparison MPI and LIP are single file projects making code tracing
-very hard.  GMP has many conditional code segments which also hinder tracing.  
-
-When compiled with GCC for the x86 processor and optimized for speed the entire library is approximately $100$KiB\footnote{The notation ``KiB'' means $2^{10}$ octets, similarly ``MiB'' means $2^{20}$ octets.}
- which is fairly small compared to GMP (over $250$KiB).  LibTomMath is slightly larger than MPI (which compiles to about 
-$50$KiB) but LibTomMath is also much faster and more complete than MPI.
-
-\subsection{API Simplicity}
-LibTomMath is designed after the MPI library and shares the API design.  Quite often programs that use MPI will build 
-with LibTomMath without change. The function names correlate directly to the action they perform.  Almost all of the 
-functions share the same parameter passing convention.  The learning curve is fairly shallow with the API provided 
-which is an extremely valuable benefit for the student and developer alike.  
-
-The LIP library is an example of a library with an API that is awkward to work with.  LIP uses function names that are often ``compressed'' to 
-illegible short hand.  LibTomMath does not share this characteristic.  
-
-The GMP library also does not return error codes.  Instead it uses a POSIX.1 \cite{POSIX1} signal system where errors
-are signaled to the host application.  This happens to be the fastest approach but definitely not the most versatile.  In
-effect a math error (i.e. invalid input, heap error, etc) can cause a program to stop functioning which is definitely 
-undersireable in many situations.
-
-\subsection{Optimizations}
-While LibTomMath is certainly not the fastest library (GMP often beats LibTomMath by a factor of two) it does
-feature a set of optimal algorithms for tasks such as modular reduction, exponentiation, multiplication and squaring.  GMP 
-and LIP also feature such optimizations while MPI only uses baseline algorithms with no optimizations.  GMP lacks a few
-of the additional modular reduction optimizations that LibTomMath features\footnote{At the time of this writing GMP
-only had Barrett and Montgomery modular reduction algorithms.}.  
-
-LibTomMath is almost always an order of magnitude faster than the MPI library at computationally expensive tasks such as modular
-exponentiation.  In the grand scheme of ``bignum'' libraries LibTomMath is faster than the average library and usually  
-slower than the best libraries such as GMP and OpenSSL by only a small factor.
-
-\subsection{Portability and Stability}
-LibTomMath will build ``out of the box'' on any platform equipped with a modern version of the GNU C Compiler 
-(\textit{GCC}).  This means that without changes the library will build without configuration or setting up any 
-variables.  LIP and MPI will build ``out of the box'' as well but have numerous known bugs.  Most notably the author of 
-MPI has recently stopped working on his library and LIP has long since been discontinued.  
-
-GMP requires a configuration script to run and will not build out of the box.   GMP and LibTomMath are still in active
-development and are very stable across a variety of platforms.
-
-\subsection{Choice}
-LibTomMath is a relatively compact, well documented, highly optimized and portable library which seems only natural for
-the case study of this text.  Various source files from the LibTomMath project will be included within the text.  However, 
-the reader is encouraged to download their own copy of the library to actually be able to work with the library.  
-
-\chapter{Getting Started}
-\section{Library Basics}
-The trick to writing any useful library of source code is to build a solid foundation and work outwards from it.  First, 
-a problem along with allowable solution parameters should be identified and analyzed.  In this particular case the 
-inability to accomodate multiple precision integers is the problem.  Futhermore, the solution must be written
-as portable source code that is reasonably efficient across several different computer platforms.
-
-After a foundation is formed the remainder of the library can be designed and implemented in a hierarchical fashion.  
-That is, to implement the lowest level dependencies first and work towards the most abstract functions last.  For example, 
-before implementing a modular exponentiation algorithm one would implement a modular reduction algorithm.
-By building outwards from a base foundation instead of using a parallel design methodology the resulting project is 
-highly modular.  Being highly modular is a desirable property of any project as it often means the resulting product
-has a small footprint and updates are easy to perform.  
-
-Usually when I start a project I will begin with the header files.  I define the data types I think I will need and 
-prototype the initial functions that are not dependent on other functions (within the library).  After I 
-implement these base functions I prototype more dependent functions and implement them.   The process repeats until
-I implement all of the functions I require.  For example, in the case of LibTomMath I implemented functions such as 
-mp\_init() well before I implemented mp\_mul() and even further before I implemented mp\_exptmod().  As an example as to 
-why this design works note that the Karatsuba and Toom-Cook multipliers were written \textit{after} the 
-dependent function mp\_exptmod() was written.  Adding the new multiplication algorithms did not require changes to the 
-mp\_exptmod() function itself and lowered the total cost of ownership (\textit{so to speak}) and of development 
-for new algorithms.  This methodology allows new algorithms to be tested in a complete framework with relative ease.
-
-\begin{center}
-\begin{figure}[here]
-\includegraphics{pics/design_process.ps}
-\caption{Design Flow of the First Few Original LibTomMath Functions.}
-\label{pic:design_process}
-\end{figure}
-\end{center}
-
-Only after the majority of the functions were in place did I pursue a less hierarchical approach to auditing and optimizing
-the source code.  For example, one day I may audit the multipliers and the next day the polynomial basis functions.  
-
-It only makes sense to begin the text with the preliminary data types and support algorithms required as well.  
-This chapter discusses the core algorithms of the library which are the dependents for every other algorithm.
-
-\section{What is a Multiple Precision Integer?}
-Recall that most programming languages, in particular ISO C \cite{ISOC}, only have fixed precision data types that on their own cannot 
-be used to represent values larger than their precision will allow. The purpose of multiple precision algorithms is 
-to use fixed precision data types to create and manipulate multiple precision integers which may represent values 
-that are very large.  
-
-As a well known analogy, school children are taught how to form numbers larger than nine by prepending more radix ten digits.  In the decimal system
-the largest single digit value is $9$.  However, by concatenating digits together larger numbers may be represented.  Newly prepended digits 
-(\textit{to the left}) are said to be in a different power of ten column.  That is, the number $123$ can be described as having a $1$ in the hundreds 
-column, $2$ in the tens column and $3$ in the ones column.  Or more formally $123 = 1 \cdot 10^2 + 2 \cdot 10^1 + 3 \cdot 10^0$.  Computer based 
-multiple precision arithmetic is essentially the same concept.  Larger integers are represented by adjoining fixed 
-precision computer words with the exception that a different radix is used.
-
-What most people probably do not think about explicitly are the various other attributes that describe a multiple precision 
-integer.  For example, the integer $154_{10}$ has two immediately obvious properties.  First, the integer is positive, 
-that is the sign of this particular integer is positive as opposed to negative.  Second, the integer has three digits in 
-its representation.  There is an additional property that the integer posesses that does not concern pencil-and-paper 
-arithmetic.  The third property is how many digits placeholders are available to hold the integer.  
-
-The human analogy of this third property is ensuring there is enough space on the paper to write the integer.  For example,
-if one starts writing a large number too far to the right on a piece of paper they will have to erase it and move left.  
-Similarly, computer algorithms must maintain strict control over memory usage to ensure that the digits of an integer
-will not exceed the allowed boundaries.  These three properties make up what is known as a multiple precision 
-integer or mp\_int for short.  
-
-\subsection{The mp\_int Structure}
-\label{sec:MPINT}
-The mp\_int structure is the ISO C based manifestation of what represents a multiple precision integer.  The ISO C standard does not provide for 
-any such data type but it does provide for making composite data types known as structures.  The following is the structure definition 
-used within LibTomMath.
-
-\index{mp\_int}
-\begin{figure}[here]
-\begin{center}
-\begin{small}
-%\begin{verbatim}
-\begin{tabular}{|l|}
-\hline
-typedef struct \{ \\
-\hspace{3mm}int used, alloc, sign;\\
-\hspace{3mm}mp\_digit *dp;\\
-\} \textbf{mp\_int}; \\
-\hline
-\end{tabular}
-%\end{verbatim}
-\end{small}
-\caption{The mp\_int Structure}
-\label{fig:mpint}
-\end{center}
-\end{figure}
-
-The mp\_int structure (fig. \ref{fig:mpint}) can be broken down as follows.
-
-\begin{enumerate}
-\item The \textbf{used} parameter denotes how many digits of the array \textbf{dp} contain the digits used to represent
-a given integer.  The \textbf{used} count must be positive (or zero) and may not exceed the \textbf{alloc} count.  
-
-\item The \textbf{alloc} parameter denotes how 
-many digits are available in the array to use by functions before it has to increase in size.  When the \textbf{used} count 
-of a result would exceed the \textbf{alloc} count all of the algorithms will automatically increase the size of the 
-array to accommodate the precision of the result.  
-
-\item The pointer \textbf{dp} points to a dynamically allocated array of digits that represent the given multiple 
-precision integer.  It is padded with $(\textbf{alloc} - \textbf{used})$ zero digits.  The array is maintained in a least 
-significant digit order.  As a pencil and paper analogy the array is organized such that the right most digits are stored
-first starting at the location indexed by zero\footnote{In C all arrays begin at zero.} in the array.  For example, 
-if \textbf{dp} contains $\lbrace a, b, c, \ldots \rbrace$ where \textbf{dp}$_0 = a$, \textbf{dp}$_1 = b$, \textbf{dp}$_2 = c$, $\ldots$ then 
-it would represent the integer $a + b\beta + c\beta^2 + \ldots$  
-
-\index{MP\_ZPOS} \index{MP\_NEG}
-\item The \textbf{sign} parameter denotes the sign as either zero/positive (\textbf{MP\_ZPOS}) or negative (\textbf{MP\_NEG}).  
-\end{enumerate}
-
-\subsubsection{Valid mp\_int Structures}
-Several rules are placed on the state of an mp\_int structure and are assumed to be followed for reasons of efficiency.  
-The only exceptions are when the structure is passed to initialization functions such as mp\_init() and mp\_init\_copy().
-
-\begin{enumerate}
-\item The value of \textbf{alloc} may not be less than one.  That is \textbf{dp} always points to a previously allocated
-array of digits.
-\item The value of \textbf{used} may not exceed \textbf{alloc} and must be greater than or equal to zero.
-\item The value of \textbf{used} implies the digit at index $(used - 1)$ of the \textbf{dp} array is non-zero.  That is, 
-leading zero digits in the most significant positions must be trimmed.
-   \begin{enumerate}
-   \item Digits in the \textbf{dp} array at and above the \textbf{used} location must be zero.
-   \end{enumerate}
-\item The value of \textbf{sign} must be \textbf{MP\_ZPOS} if \textbf{used} is zero; 
-this represents the mp\_int value of zero.
-\end{enumerate}
-
-\section{Argument Passing}
-A convention of argument passing must be adopted early on in the development of any library.  Making the function 
-prototypes consistent will help eliminate many headaches in the future as the library grows to significant complexity.  
-In LibTomMath the multiple precision integer functions accept parameters from left to right as pointers to mp\_int 
-structures.  That means that the source (input) operands are placed on the left and the destination (output) on the right.   
-Consider the following examples.
-
-\begin{verbatim}
-   mp_mul(&a, &b, &c);   /* c = a * b */
-   mp_add(&a, &b, &a);   /* a = a + b */
-   mp_sqr(&a, &b);       /* b = a * a */
-\end{verbatim}
-
-The left to right order is a fairly natural way to implement the functions since it lets the developer read aloud the
-functions and make sense of them.  For example, the first function would read ``multiply a and b and store in c''.
-
-Certain libraries (\textit{LIP by Lenstra for instance}) accept parameters the other way around, to mimic the order
-of assignment expressions.  That is, the destination (output) is on the left and arguments (inputs) are on the right.  In 
-truth, it is entirely a matter of preference.  In the case of LibTomMath the convention from the MPI library has been 
-adopted.  
-
-Another very useful design consideration, provided for in LibTomMath, is whether to allow argument sources to also be a 
-destination.  For example, the second example (\textit{mp\_add}) adds $a$ to $b$ and stores in $a$.  This is an important 
-feature to implement since it allows the calling functions to cut down on the number of variables it must maintain.  
-However, to implement this feature specific care has to be given to ensure the destination is not modified before the 
-source is fully read.
-
-\section{Return Values}
-A well implemented application, no matter what its purpose, should trap as many runtime errors as possible and return them 
-to the caller.  By catching runtime errors a library can be guaranteed to prevent undefined behaviour.  However, the end 
-developer can still manage to cause a library to crash.  For example, by passing an invalid pointer an application may
-fault by dereferencing memory not owned by the application.
-
-In the case of LibTomMath the only errors that are checked for are related to inappropriate inputs (division by zero for 
-instance) and memory allocation errors.  It will not check that the mp\_int passed to any function is valid nor 
-will it check pointers for validity.  Any function that can cause a runtime error will return an error code as an 
-\textbf{int} data type with one of the following values (fig \ref{fig:errcodes}).
-
-\index{MP\_OKAY} \index{MP\_VAL} \index{MP\_MEM}
-\begin{figure}[here]
-\begin{center}
-\begin{tabular}{|l|l|}
-\hline \textbf{Value} & \textbf{Meaning} \\
-\hline \textbf{MP\_OKAY} & The function was successful \\
-\hline \textbf{MP\_VAL}  & One of the input value(s) was invalid \\
-\hline \textbf{MP\_MEM}  & The function ran out of heap memory \\
-\hline
-\end{tabular}
-\end{center}
-\caption{LibTomMath Error Codes}
-\label{fig:errcodes}
-\end{figure}
-
-When an error is detected within a function it should free any memory it allocated, often during the initialization of
-temporary mp\_ints, and return as soon as possible.  The goal is to leave the system in the same state it was when the 
-function was called.  Error checking with this style of API is fairly simple.
-
-\begin{verbatim}
-   int err;
-   if ((err = mp_add(&a, &b, &c)) != MP_OKAY) {
-      printf("Error: %s\n", mp_error_to_string(err));
-      exit(EXIT_FAILURE);
-   }
-\end{verbatim}
-
-The GMP \cite{GMP} library uses C style \textit{signals} to flag errors which is of questionable use.  Not all errors are fatal 
-and it was not deemed ideal by the author of LibTomMath to force developers to have signal handlers for such cases.
-
-\section{Initialization and Clearing}
-The logical starting point when actually writing multiple precision integer functions is the initialization and 
-clearing of the mp\_int structures.  These two algorithms will be used by the majority of the higher level algorithms.
-
-Given the basic mp\_int structure an initialization routine must first allocate memory to hold the digits of
-the integer.  Often it is optimal to allocate a sufficiently large pre-set number of digits even though
-the initial integer will represent zero.  If only a single digit were allocated quite a few subsequent re-allocations
-would occur when operations are performed on the integers.  There is a tradeoff between how many default digits to allocate
-and how many re-allocations are tolerable.  Obviously allocating an excessive amount of digits initially will waste 
-memory and become unmanageable.  
-
-If the memory for the digits has been successfully allocated then the rest of the members of the structure must
-be initialized.  Since the initial state of an mp\_int is to represent the zero integer, the allocated digits must be set
-to zero.  The \textbf{used} count set to zero and \textbf{sign} set to \textbf{MP\_ZPOS}.
-
-\subsection{Initializing an mp\_int}
-An mp\_int is said to be initialized if it is set to a valid, preferably default, state such that all of the members of the
-structure are set to valid values.  The mp\_init algorithm will perform such an action.
-
-\index{mp\_init}
-\begin{figure}[here]
-\begin{center}
-\begin{tabular}{l}
-\hline Algorithm \textbf{mp\_init}. \\
-\textbf{Input}.   An mp\_int $a$ \\
-\textbf{Output}.  Allocate memory and initialize $a$ to a known valid mp\_int state.  \\
-\hline \\
-1.  Allocate memory for \textbf{MP\_PREC} digits. \\
-2.  If the allocation failed return(\textit{MP\_MEM}) \\
-3.  for $n$ from $0$ to $MP\_PREC - 1$ do  \\
-\hspace{3mm}3.1  $a_n \leftarrow 0$\\
-4.  $a.sign \leftarrow MP\_ZPOS$\\
-5.  $a.used \leftarrow 0$\\
-6.  $a.alloc \leftarrow MP\_PREC$\\
-7.  Return(\textit{MP\_OKAY})\\
-\hline
-\end{tabular}
-\end{center}
-\caption{Algorithm mp\_init}
-\end{figure}
-
-\textbf{Algorithm mp\_init.}
-The purpose of this function is to initialize an mp\_int structure so that the rest of the library can properly
-manipulte it.  It is assumed that the input may not have had any of its members previously initialized which is certainly
-a valid assumption if the input resides on the stack.  
-
-Before any of the members such as \textbf{sign}, \textbf{used} or \textbf{alloc} are initialized the memory for
-the digits is allocated.  If this fails the function returns before setting any of the other members.  The \textbf{MP\_PREC} 
-name represents a constant\footnote{Defined in the ``tommath.h'' header file within LibTomMath.} 
-used to dictate the minimum precision of newly initialized mp\_int integers.  Ideally, it is at least equal to the smallest
-precision number you'll be working with.
-
-Allocating a block of digits at first instead of a single digit has the benefit of lowering the number of usually slow
-heap operations later functions will have to perform in the future.  If \textbf{MP\_PREC} is set correctly the slack 
-memory and the number of heap operations will be trivial.
-
-Once the allocation has been made the digits have to be set to zero as well as the \textbf{used}, \textbf{sign} and
-\textbf{alloc} members initialized.  This ensures that the mp\_int will always represent the default state of zero regardless
-of the original condition of the input.
-
-\textbf{Remark.}
-This function introduces the idiosyncrasy that all iterative loops, commonly initiated with the ``for'' keyword, iterate incrementally
-when the ``to'' keyword is placed between two expressions.  For example, ``for $a$ from $b$ to $c$ do'' means that
-a subsequent expression (or body of expressions) are to be evaluated upto $c - b$ times so long as $b \le c$.  In each
-iteration the variable $a$ is substituted for a new integer that lies inclusively between $b$ and $c$.  If $b > c$ occured
-the loop would not iterate.  By contrast if the ``downto'' keyword were used in place of ``to'' the loop would iterate 
-decrementally.
-
-\vspace{+3mm}\begin{small}
-\hspace{-5.1mm}{\bf File}: bn\_mp\_init.c
-\vspace{-3mm}
-\begin{alltt}
-016   
-017   /* init a new mp_int */
-018   int mp_init (mp_int * a)
-019   \{
-020     int i;
-021   
-022     /* allocate memory required and clear it */
-023     a->dp = OPT_CAST(mp_digit) XMALLOC (sizeof (mp_digit) * MP_PREC);
-024     if (a->dp == NULL) \{
-025       return MP_MEM;
-026     \}
-027   
-028     /* set the digits to zero */
-029     for (i = 0; i < MP_PREC; i++) \{
-030         a->dp[i] = 0;
-031     \}
-032   
-033     /* set the used to zero, allocated digits to the default precision
-034      * and sign to positive */
-035     a->used  = 0;
-036     a->alloc = MP_PREC;
-037     a->sign  = MP_ZPOS;
-038   
-039     return MP_OKAY;
-040   \}
-041   #endif
-\end{alltt}
-\end{small}
-
-One immediate observation of this initializtion function is that it does not return a pointer to a mp\_int structure.  It 
-is assumed that the caller has already allocated memory for the mp\_int structure, typically on the application stack.  The 
-call to mp\_init() is used only to initialize the members of the structure to a known default state.  
-
-Here we see (line 23) the memory allocation is performed first.  This allows us to exit cleanly and quickly
-if there is an error.  If the allocation fails the routine will return \textbf{MP\_MEM} to the caller to indicate there
-was a memory error.  The function XMALLOC is what actually allocates the memory.  Technically XMALLOC is not a function
-but a macro defined in ``tommath.h``.  By default, XMALLOC will evaluate to malloc() which is the C library's built--in
-memory allocation routine.
-
-In order to assure the mp\_int is in a known state the digits must be set to zero.  On most platforms this could have been
-accomplished by using calloc() instead of malloc().  However,  to correctly initialize a integer type to a given value in a 
-portable fashion you have to actually assign the value.  The for loop (line 29) performs this required
-operation.
-
-After the memory has been successfully initialized the remainder of the members are initialized 
-(lines 33 through 34) to their respective default states.  At this point the algorithm has succeeded and
-a success code is returned to the calling function.  If this function returns \textbf{MP\_OKAY} it is safe to assume the 
-mp\_int structure has been properly initialized and is safe to use with other functions within the library.  
-
-\subsection{Clearing an mp\_int}
-When an mp\_int is no longer required by the application, the memory that has been allocated for its digits must be 
-returned to the application's memory pool with the mp\_clear algorithm.
-
-\begin{figure}[here]
-\begin{center}
-\begin{tabular}{l}
-\hline Algorithm \textbf{mp\_clear}. \\
-\textbf{Input}.   An mp\_int $a$ \\
-\textbf{Output}.  The memory for $a$ shall be deallocated.  \\
-\hline \\
-1.  If $a$ has been previously freed then return(\textit{MP\_OKAY}). \\
-2.  for $n$ from 0 to $a.used - 1$ do \\
-\hspace{3mm}2.1  $a_n \leftarrow 0$ \\
-3.  Free the memory allocated for the digits of $a$. \\
-4.  $a.used \leftarrow 0$ \\
-5.  $a.alloc \leftarrow 0$ \\
-6.  $a.sign \leftarrow MP\_ZPOS$ \\
-7.  Return(\textit{MP\_OKAY}). \\
-\hline
-\end{tabular}
-\end{center}
-\caption{Algorithm mp\_clear}
-\end{figure}
-
-\textbf{Algorithm mp\_clear.}
-This algorithm accomplishes two goals.  First, it clears the digits and the other mp\_int members.  This ensures that 
-if a developer accidentally re-uses a cleared structure it is less likely to cause problems.  The second goal
-is to free the allocated memory.
-
-The logic behind the algorithm is extended by marking cleared mp\_int structures so that subsequent calls to this
-algorithm will not try to free the memory multiple times.  Cleared mp\_ints are detectable by having a pre-defined invalid 
-digit pointer \textbf{dp} setting.
-
-Once an mp\_int has been cleared the mp\_int structure is no longer in a valid state for any other algorithm
-with the exception of algorithms mp\_init, mp\_init\_copy, mp\_init\_size and mp\_clear.
-
-\vspace{+3mm}\begin{small}
-\hspace{-5.1mm}{\bf File}: bn\_mp\_clear.c
-\vspace{-3mm}
-\begin{alltt}
-016   
-017   /* clear one (frees)  */
-018   void
-019   mp_clear (mp_int * a)
-020   \{
-021     int i;
-022   
-023     /* only do anything if a hasn't been freed previously */
-024     if (a->dp != NULL) \{
-025       /* first zero the digits */
-026       for (i = 0; i < a->used; i++) \{
-027           a->dp[i] = 0;
-028       \}
-029   
-030       /* free ram */
-031       XFREE(a->dp);
-032   
-033       /* reset members to make debugging easier */
-034       a->dp    = NULL;
-035       a->alloc = a->used = 0;
-036       a->sign  = MP_ZPOS;
-037     \}
-038   \}
-039   #endif
-\end{alltt}
-\end{small}
-
-The algorithm only operates on the mp\_int if it hasn't been previously cleared.  The if statement (line 24)
-checks to see if the \textbf{dp} member is not \textbf{NULL}.  If the mp\_int is a valid mp\_int then \textbf{dp} cannot be
-\textbf{NULL} in which case the if statement will evaluate to true.
-
-The digits of the mp\_int are cleared by the for loop (line 26) which assigns a zero to every digit.  Similar to mp\_init()
-the digits are assigned zero instead of using block memory operations (such as memset()) since this is more portable.  
-
-The digits are deallocated off the heap via the XFREE macro.  Similar to XMALLOC the XFREE macro actually evaluates to
-a standard C library function.  In this case the free() function.  Since free() only deallocates the memory the pointer
-still has to be reset to \textbf{NULL} manually (line 34).  
-
-Now that the digits have been cleared and deallocated the other members are set to their final values (lines 35 and 36).
-
-\section{Maintenance Algorithms}
-
-The previous sections describes how to initialize and clear an mp\_int structure.  To further support operations
-that are to be performed on mp\_int structures (such as addition and multiplication) the dependent algorithms must be
-able to augment the precision of an mp\_int and 
-initialize mp\_ints with differing initial conditions.  
-
-These algorithms complete the set of low level algorithms required to work with mp\_int structures in the higher level
-algorithms such as addition, multiplication and modular exponentiation.
-
-\subsection{Augmenting an mp\_int's Precision}
-When storing a value in an mp\_int structure, a sufficient number of digits must be available to accomodate the entire 
-result of an operation without loss of precision.  Quite often the size of the array given by the \textbf{alloc} member 
-is large enough to simply increase the \textbf{used} digit count.  However, when the size of the array is too small it 
-must be re-sized appropriately to accomodate the result.  The mp\_grow algorithm will provide this functionality.
-
-\newpage\begin{figure}[here]
-\begin{center}
-\begin{tabular}{l}
-\hline Algorithm \textbf{mp\_grow}. \\
-\textbf{Input}.   An mp\_int $a$ and an integer $b$. \\
-\textbf{Output}.  $a$ is expanded to accomodate $b$ digits. \\
-\hline \\
-1.  if $a.alloc \ge b$ then return(\textit{MP\_OKAY}) \\
-2.  $u \leftarrow b\mbox{ (mod }MP\_PREC\mbox{)}$ \\
-3.  $v \leftarrow b + 2 \cdot MP\_PREC - u$ \\
-4.  Re-allocate the array of digits $a$ to size $v$ \\
-5.  If the allocation failed then return(\textit{MP\_MEM}). \\
-6.  for n from a.alloc to $v - 1$ do  \\
-\hspace{+3mm}6.1  $a_n \leftarrow 0$ \\
-7.  $a.alloc \leftarrow v$ \\
-8.  Return(\textit{MP\_OKAY}) \\
-\hline
-\end{tabular}
-\end{center}
-\caption{Algorithm mp\_grow}
-\end{figure}
-
-\textbf{Algorithm mp\_grow.}
-It is ideal to prevent re-allocations from being performed if they are not required (step one).  This is useful to 
-prevent mp\_ints from growing excessively in code that erroneously calls mp\_grow.  
-
-The requested digit count is padded up to next multiple of \textbf{MP\_PREC} plus an additional \textbf{MP\_PREC} (steps two and three).  
-This helps prevent many trivial reallocations that would grow an mp\_int by trivially small values.  
-
-It is assumed that the reallocation (step four) leaves the lower $a.alloc$ digits of the mp\_int intact.  This is much 
-akin to how the \textit{realloc} function from the standard C library works.  Since the newly allocated digits are 
-assumed to contain undefined values they are initially set to zero.
-
-\vspace{+3mm}\begin{small}
-\hspace{-5.1mm}{\bf File}: bn\_mp\_grow.c
-\vspace{-3mm}
-\begin{alltt}
-016   
-017   /* grow as required */
-018   int mp_grow (mp_int * a, int size)
-019   \{
-020     int     i;
-021     mp_digit *tmp;
-022   
-023     /* if the alloc size is smaller alloc more ram */
-024     if (a->alloc < size) \{
-025       /* ensure there are always at least MP_PREC digits extra on top */
-026       size += (MP_PREC * 2) - (size % MP_PREC);
-027   
-028       /* reallocate the array a->dp
-029        *
-030        * We store the return in a temporary variable
-031        * in case the operation failed we don't want
-032        * to overwrite the dp member of a.
-033        */
-034       tmp = OPT_CAST(mp_digit) XREALLOC (a->dp, sizeof (mp_digit) * size);
-035       if (tmp == NULL) \{
-036         /* reallocation failed but "a" is still valid [can be freed] */
-037         return MP_MEM;
-038       \}
-039   
-040       /* reallocation succeeded so set a->dp */
-041       a->dp = tmp;
-042   
-043       /* zero excess digits */
-044       i        = a->alloc;
-045       a->alloc = size;
-046       for (; i < a->alloc; i++) \{
-047         a->dp[i] = 0;
-048       \}
-049     \}
-050     return MP_OKAY;
-051   \}
-052   #endif
-\end{alltt}
-\end{small}
-
-A quick optimization is to first determine if a memory re-allocation is required at all.  The if statement (line 24) checks
-if the \textbf{alloc} member of the mp\_int is smaller than the requested digit count.  If the count is not larger than \textbf{alloc}
-the function skips the re-allocation part thus saving time.
-
-When a re-allocation is performed it is turned into an optimal request to save time in the future.  The requested digit count is
-padded upwards to 2nd multiple of \textbf{MP\_PREC} larger than \textbf{alloc} (line 26).  The XREALLOC function is used
-to re-allocate the memory.  As per the other functions XREALLOC is actually a macro which evaluates to realloc by default.  The realloc
-function leaves the base of the allocation intact which means the first \textbf{alloc} digits of the mp\_int are the same as before
-the re-allocation.  All	that is left is to clear the newly allocated digits and return.
-
-Note that the re-allocation result is actually stored in a temporary pointer $tmp$.  This is to allow this function to return
-an error with a valid pointer.  Earlier releases of the library stored the result of XREALLOC into the mp\_int $a$.  That would
-result in a memory leak if XREALLOC ever failed.  
-
-\subsection{Initializing Variable Precision mp\_ints}
-Occasionally the number of digits required will be known in advance of an initialization, based on, for example, the size 
-of input mp\_ints to a given algorithm.  The purpose of algorithm mp\_init\_size is similar to mp\_init except that it 
-will allocate \textit{at least} a specified number of digits.  
-
-\begin{figure}[here]
-\begin{small}
-\begin{center}
-\begin{tabular}{l}
-\hline Algorithm \textbf{mp\_init\_size}. \\
-\textbf{Input}.   An mp\_int $a$ and the requested number of digits $b$. \\
-\textbf{Output}.  $a$ is initialized to hold at least $b$ digits. \\
-\hline \\
-1.  $u \leftarrow b \mbox{ (mod }MP\_PREC\mbox{)}$ \\
-2.  $v \leftarrow b + 2 \cdot MP\_PREC - u$ \\
-3.  Allocate $v$ digits. \\
-4.  for $n$ from $0$ to $v - 1$ do \\
-\hspace{3mm}4.1  $a_n \leftarrow 0$ \\
-5.  $a.sign \leftarrow MP\_ZPOS$\\
-6.  $a.used \leftarrow 0$\\
-7.  $a.alloc \leftarrow v$\\
-8.  Return(\textit{MP\_OKAY})\\
-\hline
-\end{tabular}
-\end{center}
-\end{small}
-\caption{Algorithm mp\_init\_size}
-\end{figure}
-
-\textbf{Algorithm mp\_init\_size.}
-This algorithm will initialize an mp\_int structure $a$ like algorithm mp\_init with the exception that the number of 
-digits allocated can be controlled by the second input argument $b$.  The input size is padded upwards so it is a 
-multiple of \textbf{MP\_PREC} plus an additional \textbf{MP\_PREC} digits.  This padding is used to prevent trivial 
-allocations from becoming a bottleneck in the rest of the algorithms.
-
-Like algorithm mp\_init, the mp\_int structure is initialized to a default state representing the integer zero.  This 
-particular algorithm is useful if it is known ahead of time the approximate size of the input.  If the approximation is
-correct no further memory re-allocations are required to work with the mp\_int.
-
-\vspace{+3mm}\begin{small}
-\hspace{-5.1mm}{\bf File}: bn\_mp\_init\_size.c
-\vspace{-3mm}
-\begin{alltt}
-016   
-017   /* init an mp_init for a given size */
-018   int mp_init_size (mp_int * a, int size)
-019   \{
-020     int x;
-021   
-022     /* pad size so there are always extra digits */
-023     size += (MP_PREC * 2) - (size % MP_PREC);    
-024     
-025     /* alloc mem */
-026     a->dp = OPT_CAST(mp_digit) XMALLOC (sizeof (mp_digit) * size);
-027     if (a->dp == NULL) \{
-028       return MP_MEM;
-029     \}
-030   
-031     /* set the members */
-032     a->used  = 0;
-033     a->alloc = size;
-034     a->sign  = MP_ZPOS;
-035   
-036     /* zero the digits */
-037     for (x = 0; x < size; x++) \{
-038         a->dp[x] = 0;
-039     \}
-040   
-041     return MP_OKAY;
-042   \}
-043   #endif
-\end{alltt}
-\end{small}
-
-The number of digits $b$ requested is padded (line 23) by first augmenting it to the next multiple of 
-\textbf{MP\_PREC} and then adding \textbf{MP\_PREC} to the result.  If the memory can be successfully allocated the 
-mp\_int is placed in a default state representing the integer zero.  Otherwise, the error code \textbf{MP\_MEM} will be 
-returned (line 28).  
-
-The digits are allocated and set to zero at the same time with the calloc() function (line @25,XCALLOC@).  The 
-\textbf{used} count is set to zero, the \textbf{alloc} count set to the padded digit count and the \textbf{sign} flag set 
-to \textbf{MP\_ZPOS} to achieve a default valid mp\_int state (lines 32, 33 and 34).  If the function 
-returns succesfully then it is correct to assume that the mp\_int structure is in a valid state for the remainder of the 
-functions to work with.
-
-\subsection{Multiple Integer Initializations and Clearings}
-Occasionally a function will require a series of mp\_int data types to be made available simultaneously.  
-The purpose of algorithm mp\_init\_multi is to initialize a variable length array of mp\_int structures in a single
-statement.  It is essentially a shortcut to multiple initializations.
-
-\newpage\begin{figure}[here]
-\begin{center}
-\begin{tabular}{l}
-\hline Algorithm \textbf{mp\_init\_multi}. \\
-\textbf{Input}.   Variable length array $V_k$ of mp\_int variables of length $k$. \\
-\textbf{Output}.  The array is initialized such that each mp\_int of $V_k$ is ready to use. \\
-\hline \\
-1.  for $n$ from 0 to $k - 1$ do \\
-\hspace{+3mm}1.1.  Initialize the mp\_int $V_n$ (\textit{mp\_init}) \\
-\hspace{+3mm}1.2.  If initialization failed then do \\
-\hspace{+6mm}1.2.1.  for $j$ from $0$ to $n$ do \\
-\hspace{+9mm}1.2.1.1.  Free the mp\_int $V_j$ (\textit{mp\_clear}) \\
-\hspace{+6mm}1.2.2.   Return(\textit{MP\_MEM}) \\
-2.  Return(\textit{MP\_OKAY}) \\
-\hline
-\end{tabular}
-\end{center}
-\caption{Algorithm mp\_init\_multi}
-\end{figure}
-
-\textbf{Algorithm mp\_init\_multi.}
-The algorithm will initialize the array of mp\_int variables one at a time.  If a runtime error has been detected 
-(\textit{step 1.2}) all of the previously initialized variables are cleared.  The goal is an ``all or nothing'' 
-initialization which allows for quick recovery from runtime errors.
-
-\vspace{+3mm}\begin{small}
-\hspace{-5.1mm}{\bf File}: bn\_mp\_init\_multi.c
-\vspace{-3mm}
-\begin{alltt}
-016   #include <stdarg.h>
-017   
-018   int mp_init_multi(mp_int *mp, ...) 
-019   \{
-020       mp_err res = MP_OKAY;      /* Assume ok until proven otherwise */
-021       int n = 0;                 /* Number of ok inits */
-022       mp_int* cur_arg = mp;
-023       va_list args;
-024   
-025       va_start(args, mp);        /* init args to next argument from caller */
-026       while (cur_arg != NULL) \{
-027           if (mp_init(cur_arg) != MP_OKAY) \{
-028               /* Oops - error! Back-track and mp_clear what we already
-029                  succeeded in init-ing, then return error.
-030               */
-031               va_list clean_args;
-032               
-033               /* end the current list */
-034               va_end(args);
-035               
-036               /* now start cleaning up */            
-037               cur_arg = mp;
-038               va_start(clean_args, mp);
-039               while (n--) \{
-040                   mp_clear(cur_arg);
-041                   cur_arg = va_arg(clean_args, mp_int*);
-042               \}
-043               va_end(clean_args);
-044               res = MP_MEM;
-045               break;
-046           \}
-047           n++;
-048           cur_arg = va_arg(args, mp_int*);
-049       \}
-050       va_end(args);
-051       return res;                /* Assumed ok, if error flagged above. */
-052   \}
-053   
-054   #endif
-\end{alltt}
-\end{small}
-
-This function intializes a variable length list of mp\_int structure pointers.  However, instead of having the mp\_int
-structures in an actual C array they are simply passed as arguments to the function.  This function makes use of the 
-``...'' argument syntax of the C programming language.  The list is terminated with a final \textbf{NULL} argument 
-appended on the right.  
-
-The function uses the ``stdarg.h'' \textit{va} functions to step portably through the arguments to the function.  A count
-$n$ of succesfully initialized mp\_int structures is maintained (line 47) such that if a failure does occur,
-the algorithm can backtrack and free the previously initialized structures (lines 27 to 46).  
-
-
-\subsection{Clamping Excess Digits}
-When a function anticipates a result will be $n$ digits it is simpler to assume this is true within the body of 
-the function instead of checking during the computation.  For example, a multiplication of a $i$ digit number by a 
-$j$ digit produces a result of at most $i + j$ digits.  It is entirely possible that the result is $i + j - 1$ 
-though, with no final carry into the last position.  However, suppose the destination had to be first expanded 
-(\textit{via mp\_grow}) to accomodate $i + j - 1$ digits than further expanded to accomodate the final carry.  
-That would be a considerable waste of time since heap operations are relatively slow.
-
-The ideal solution is to always assume the result is $i + j$ and fix up the \textbf{used} count after the function
-terminates.  This way a single heap operation (\textit{at most}) is required.  However, if the result was not checked
-there would be an excess high order zero digit.  
-
-For example, suppose the product of two integers was $x_n = (0x_{n-1}x_{n-2}...x_0)_{\beta}$.  The leading zero digit 
-will not contribute to the precision of the result.  In fact, through subsequent operations more leading zero digits would
-accumulate to the point the size of the integer would be prohibitive.  As a result even though the precision is very 
-low the representation is excessively large.  
-
-The mp\_clamp algorithm is designed to solve this very problem.  It will trim high-order zeros by decrementing the 
-\textbf{used} count until a non-zero most significant digit is found.  Also in this system, zero is considered to be a 
-positive number which means that if the \textbf{used} count is decremented to zero, the sign must be set to 
-\textbf{MP\_ZPOS}.
-
-\begin{figure}[here]
-\begin{center}
-\begin{tabular}{l}
-\hline Algorithm \textbf{mp\_clamp}. \\
-\textbf{Input}.   An mp\_int $a$ \\
-\textbf{Output}.  Any excess leading zero digits of $a$ are removed \\
-\hline \\
-1.  while $a.used > 0$ and $a_{a.used - 1} = 0$ do \\
-\hspace{+3mm}1.1  $a.used \leftarrow a.used - 1$ \\
-2.  if $a.used = 0$ then do \\
-\hspace{+3mm}2.1  $a.sign \leftarrow MP\_ZPOS$ \\
-\hline \\
-\end{tabular}
-\end{center}
-\caption{Algorithm mp\_clamp}
-\end{figure}
-
-\textbf{Algorithm mp\_clamp.}
-As can be expected this algorithm is very simple.  The loop on step one is expected to iterate only once or twice at
-the most.  For example, this will happen in cases where there is not a carry to fill the last position.  Step two fixes the sign for 
-when all of the digits are zero to ensure that the mp\_int is valid at all times.
-
-\vspace{+3mm}\begin{small}
-\hspace{-5.1mm}{\bf File}: bn\_mp\_clamp.c
-\vspace{-3mm}
-\begin{alltt}
-016   
-017   /* trim unused digits 
-018    *
-019    * This is used to ensure that leading zero digits are
-020    * trimed and the leading "used" digit will be non-zero
-021    * Typically very fast.  Also fixes the sign if there
-022    * are no more leading digits
-023    */
-024   void
-025   mp_clamp (mp_int * a)
-026   \{
-027     /* decrease used while the most significant digit is
-028      * zero.
-029      */
-030     while (a->used > 0 && a->dp[a->used - 1] == 0) \{
-031       --(a->used);
-032     \}
-033   
-034     /* reset the sign flag if used == 0 */
-035     if (a->used == 0) \{
-036       a->sign = MP_ZPOS;
-037     \}
-038   \}
-039   #endif
-\end{alltt}
-\end{small}
-
-Note on line 27 how to test for the \textbf{used} count is made on the left of the \&\& operator.  In the C programming
-language the terms to \&\& are evaluated left to right with a boolean short-circuit if any condition fails.  This is 
-important since if the \textbf{used} is zero the test on the right would fetch below the array.  That is obviously 
-undesirable.  The parenthesis on line 30 is used to make sure the \textbf{used} count is decremented and not
-the pointer ``a''.  
-
-\section*{Exercises}
-\begin{tabular}{cl}
-$\left [ 1 \right ]$ & Discuss the relevance of the \textbf{used} member of the mp\_int structure. \\
-                     & \\
-$\left [ 1 \right ]$ & Discuss the consequences of not using padding when performing allocations.  \\
-                     & \\
-$\left [ 2 \right ]$ & Estimate an ideal value for \textbf{MP\_PREC} when performing 1024-bit RSA \\
-                     & encryption when $\beta = 2^{28}$.  \\
-                     & \\
-$\left [ 1 \right ]$ & Discuss the relevance of the algorithm mp\_clamp.  What does it prevent? \\
-                     & \\
-$\left [ 1 \right ]$ & Give an example of when the algorithm  mp\_init\_copy might be useful. \\
-                     & \\
-\end{tabular}
-
-
-%%%
-% CHAPTER FOUR
-%%%
-
-\chapter{Basic Operations}
-
-\section{Introduction}
-In the previous chapter a series of low level algorithms were established that dealt with initializing and maintaining
-mp\_int structures.  This chapter will discuss another set of seemingly non-algebraic algorithms which will form the low 
-level basis of the entire library.  While these algorithm are relatively trivial it is important to understand how they
-work before proceeding since these algorithms will be used almost intrinsically in the following chapters.
-
-The algorithms in this chapter deal primarily with more ``programmer'' related tasks such as creating copies of
-mp\_int structures, assigning small values to mp\_int structures and comparisons of the values mp\_int structures
-represent.   
-
-\section{Assigning Values to mp\_int Structures}
-\subsection{Copying an mp\_int}
-Assigning the value that a given mp\_int structure represents to another mp\_int structure shall be known as making
-a copy for the purposes of this text.  The copy of the mp\_int will be a separate entity that represents the same
-value as the mp\_int it was copied from.  The mp\_copy algorithm provides this functionality. 
-
-\newpage\begin{figure}[here]
-\begin{center}
-\begin{tabular}{l}
-\hline Algorithm \textbf{mp\_copy}. \\
-\textbf{Input}.  An mp\_int $a$ and $b$. \\
-\textbf{Output}.  Store a copy of $a$ in $b$. \\
-\hline \\
-1.  If $b.alloc < a.used$ then grow $b$ to $a.used$ digits.  (\textit{mp\_grow}) \\
-2.  for $n$ from 0 to $a.used - 1$ do \\
-\hspace{3mm}2.1  $b_{n} \leftarrow a_{n}$ \\
-3.  for $n$ from $a.used$ to $b.used - 1$ do \\
-\hspace{3mm}3.1  $b_{n} \leftarrow 0$ \\
-4.  $b.used \leftarrow a.used$ \\
-5.  $b.sign \leftarrow a.sign$ \\
-6.  return(\textit{MP\_OKAY}) \\
-\hline
-\end{tabular}
-\end{center}
-\caption{Algorithm mp\_copy}
-\end{figure}
-
-\textbf{Algorithm mp\_copy.}
-This algorithm copies the mp\_int $a$ such that upon succesful termination of the algorithm the mp\_int $b$ will
-represent the same integer as the mp\_int $a$.  The mp\_int $b$ shall be a complete and distinct copy of the 
-mp\_int $a$ meaing that the mp\_int $a$ can be modified and it shall not affect the value of the mp\_int $b$.
-
-If $b$ does not have enough room for the digits of $a$ it must first have its precision augmented via the mp\_grow 
-algorithm.  The digits of $a$ are copied over the digits of $b$ and any excess digits of $b$ are set to zero (step two
-and three).  The \textbf{used} and \textbf{sign} members of $a$ are finally copied over the respective members of
-$b$.
-
-\textbf{Remark.}  This algorithm also introduces a new idiosyncrasy that will be used throughout the rest of the
-text.  The error return codes of other algorithms are not explicitly checked in the pseudo-code presented.  For example, in 
-step one of the mp\_copy algorithm the return of mp\_grow is not explicitly checked to ensure it succeeded.  Text space is 
-limited so it is assumed that if a algorithm fails it will clear all temporarily allocated mp\_ints and return
-the error code itself.  However, the C code presented will demonstrate all of the error handling logic required to 
-implement the pseudo-code.
-
-\vspace{+3mm}\begin{small}
-\hspace{-5.1mm}{\bf File}: bn\_mp\_copy.c
-\vspace{-3mm}
-\begin{alltt}
-016   
-017   /* copy, b = a */
-018   int
-019   mp_copy (mp_int * a, mp_int * b)
-020   \{
-021     int     res, n;
-022   
-023     /* if dst == src do nothing */
-024     if (a == b) \{
-025       return MP_OKAY;
-026     \}
-027   
-028     /* grow dest */
-029     if (b->alloc < a->used) \{
-030        if ((res = mp_grow (b, a->used)) != MP_OKAY) \{
-031           return res;
-032        \}
-033     \}
-034   
-035     /* zero b and copy the parameters over */
-036     \{
-037       register mp_digit *tmpa, *tmpb;
-038   
-039       /* pointer aliases */
-040   
-041       /* source */
-042       tmpa = a->dp;
-043   
-044       /* destination */
-045       tmpb = b->dp;
-046   
-047       /* copy all the digits */
-048       for (n = 0; n < a->used; n++) \{
-049         *tmpb++ = *tmpa++;
-050       \}
-051   
-052       /* clear high digits */
-053       for (; n < b->used; n++) \{
-054         *tmpb++ = 0;
-055       \}
-056     \}
-057   
-058     /* copy used count and sign */
-059     b->used = a->used;
-060     b->sign = a->sign;
-061     return MP_OKAY;
-062   \}
-063   #endif
-\end{alltt}
-\end{small}
-
-Occasionally a dependent algorithm may copy an mp\_int effectively into itself such as when the input and output
-mp\_int structures passed to a function are one and the same.  For this case it is optimal to return immediately without 
-copying digits (line 24).  
-
-The mp\_int $b$ must have enough digits to accomodate the used digits of the mp\_int $a$.  If $b.alloc$ is less than
-$a.used$ the algorithm mp\_grow is used to augment the precision of $b$ (lines 29 to 33).  In order to
-simplify the inner loop that copies the digits from $a$ to $b$, two aliases $tmpa$ and $tmpb$ point directly at the digits
-of the mp\_ints $a$ and $b$ respectively.  These aliases (lines 42 and 45) allow the compiler to access the digits without first dereferencing the
-mp\_int pointers and then subsequently the pointer to the digits.  
-
-After the aliases are established the digits from $a$ are copied into $b$ (lines 48 to 50) and then the excess 
-digits of $b$ are set to zero (lines 53 to 55).  Both ``for'' loops make use of the pointer aliases and in 
-fact the alias for $b$ is carried through into the second ``for'' loop to clear the excess digits.  This optimization 
-allows the alias to stay in a machine register fairly easy between the two loops.
-
-\textbf{Remarks.}  The use of pointer aliases is an implementation methodology first introduced in this function that will
-be used considerably in other functions.  Technically, a pointer alias is simply a short hand alias used to lower the 
-number of pointer dereferencing operations required to access data.  For example, a for loop may resemble
-
-\begin{alltt}
-for (x = 0; x < 100; x++) \{
-    a->num[4]->dp[x] = 0;
-\}
-\end{alltt}
-
-This could be re-written using aliases as 
-
-\begin{alltt}
-mp_digit *tmpa;
-a = a->num[4]->dp;
-for (x = 0; x < 100; x++) \{
-    *a++ = 0;
-\}
-\end{alltt}
-
-In this case an alias is used to access the 
-array of digits within an mp\_int structure directly.  It may seem that a pointer alias is strictly not required 
-as a compiler may optimize out the redundant pointer operations.  However, there are two dominant reasons to use aliases.
-
-The first reason is that most compilers will not effectively optimize pointer arithmetic.  For example, some optimizations 
-may work for the Microsoft Visual C++ compiler (MSVC) and not for the GNU C Compiler (GCC).  Also some optimizations may 
-work for GCC and not MSVC.  As such it is ideal to find a common ground for as many compilers as possible.  Pointer 
-aliases optimize the code considerably before the compiler even reads the source code which means the end compiled code 
-stands a better chance of being faster.
-
-The second reason is that pointer aliases often can make an algorithm simpler to read.  Consider the first ``for'' 
-loop of the function mp\_copy() re-written to not use pointer aliases.
-
-\begin{alltt}
-    /* copy all the digits */
-    for (n = 0; n < a->used; n++) \{
-      b->dp[n] = a->dp[n];
-    \}
-\end{alltt}
-
-Whether this code is harder to read depends strongly on the individual.  However, it is quantifiably slightly more 
-complicated as there are four variables within the statement instead of just two.
-
-\subsubsection{Nested Statements}
-Another commonly used technique in the source routines is that certain sections of code are nested.  This is used in
-particular with the pointer aliases to highlight code phases.  For example, a Comba multiplier (discussed in chapter six)
-will typically have three different phases.  First the temporaries are initialized, then the columns calculated and 
-finally the carries are propagated.  In this example the middle column production phase will typically be nested as it
-uses temporary variables and aliases the most.
-
-The nesting also simplies the source code as variables that are nested are only valid for their scope.  As a result
-the various temporary variables required do not propagate into other sections of code.
-
-
-\subsection{Creating a Clone}
-Another common operation is to make a local temporary copy of an mp\_int argument.  To initialize an mp\_int 
-and then copy another existing mp\_int into the newly intialized mp\_int will be known as creating a clone.  This is 
-useful within functions that need to modify an argument but do not wish to actually modify the original copy.  The 
-mp\_init\_copy algorithm has been designed to help perform this task.
-
-\begin{figure}[here]
-\begin{center}
-\begin{tabular}{l}
-\hline Algorithm \textbf{mp\_init\_copy}. \\
-\textbf{Input}.   An mp\_int $a$ and $b$\\
-\textbf{Output}.  $a$ is initialized to be a copy of $b$. \\
-\hline \\
-1.  Init $a$.  (\textit{mp\_init}) \\
-2.  Copy $b$ to $a$.  (\textit{mp\_copy}) \\
-3.  Return the status of the copy operation. \\
-\hline
-\end{tabular}
-\end{center}
-\caption{Algorithm mp\_init\_copy}
-\end{figure}
-
-\textbf{Algorithm mp\_init\_copy.}
-This algorithm will initialize an mp\_int variable and copy another previously initialized mp\_int variable into it.  As 
-such this algorithm will perform two operations in one step.  
-
-\vspace{+3mm}\begin{small}
-\hspace{-5.1mm}{\bf File}: bn\_mp\_init\_copy.c
-\vspace{-3mm}
-\begin{alltt}
-016   
-017   /* creates "a" then copies b into it */
-018   int mp_init_copy (mp_int * a, mp_int * b)
-019   \{
-020     int     res;
-021   
-022     if ((res = mp_init (a)) != MP_OKAY) \{
-023       return res;
-024     \}
-025     return mp_copy (b, a);
-026   \}
-027   #endif
-\end{alltt}
-\end{small}
-
-This will initialize \textbf{a} and make it a verbatim copy of the contents of \textbf{b}.  Note that 
-\textbf{a} will have its own memory allocated which means that \textbf{b} may be cleared after the call
-and \textbf{a} will be left intact.  
-
-\section{Zeroing an Integer}
-Reseting an mp\_int to the default state is a common step in many algorithms.  The mp\_zero algorithm will be the algorithm used to
-perform this task.
-
-\begin{figure}[here]
-\begin{center}
-\begin{tabular}{l}
-\hline Algorithm \textbf{mp\_zero}. \\
-\textbf{Input}.   An mp\_int $a$ \\
-\textbf{Output}.  Zero the contents of $a$ \\
-\hline \\
-1.  $a.used \leftarrow 0$ \\
-2.  $a.sign \leftarrow$ MP\_ZPOS \\
-3.  for $n$ from 0 to $a.alloc - 1$ do \\
-\hspace{3mm}3.1  $a_n \leftarrow 0$ \\
-\hline
-\end{tabular}
-\end{center}
-\caption{Algorithm mp\_zero}
-\end{figure}
-
-\textbf{Algorithm mp\_zero.}
-This algorithm simply resets a mp\_int to the default state.  
-
-\vspace{+3mm}\begin{small}
-\hspace{-5.1mm}{\bf File}: bn\_mp\_zero.c
-\vspace{-3mm}
-\begin{alltt}
-016   
-017   /* set to zero */
-018   void mp_zero (mp_int * a)
-019   \{
-020     int       n;
-021     mp_digit *tmp;
-022   
-023     a->sign = MP_ZPOS;
-024     a->used = 0;
-025   
-026     tmp = a->dp;
-027     for (n = 0; n < a->alloc; n++) \{
-028        *tmp++ = 0;
-029     \}
-030   \}
-031   #endif
-\end{alltt}
-\end{small}
-
-After the function is completed, all of the digits are zeroed, the \textbf{used} count is zeroed and the 
-\textbf{sign} variable is set to \textbf{MP\_ZPOS}.
-
-\section{Sign Manipulation}
-\subsection{Absolute Value}
-With the mp\_int representation of an integer, calculating the absolute value is trivial.  The mp\_abs algorithm will compute
-the absolute value of an mp\_int.
-
-\begin{figure}[here]
-\begin{center}
-\begin{tabular}{l}
-\hline Algorithm \textbf{mp\_abs}. \\
-\textbf{Input}.   An mp\_int $a$ \\
-\textbf{Output}.  Computes $b = \vert a \vert$ \\
-\hline \\
-1.  Copy $a$ to $b$.  (\textit{mp\_copy}) \\
-2.  If the copy failed return(\textit{MP\_MEM}). \\
-3.  $b.sign \leftarrow MP\_ZPOS$ \\
-4.  Return(\textit{MP\_OKAY}) \\
-\hline
-\end{tabular}
-\end{center}
-\caption{Algorithm mp\_abs}
-\end{figure}
-
-\textbf{Algorithm mp\_abs.}
-This algorithm computes the absolute of an mp\_int input.  First it copies $a$ over $b$.  This is an example of an
-algorithm where the check in mp\_copy that determines if the source and destination are equal proves useful.  This allows,
-for instance, the developer to pass the same mp\_int as the source and destination to this function without addition 
-logic to handle it.
-
-\vspace{+3mm}\begin{small}
-\hspace{-5.1mm}{\bf File}: bn\_mp\_abs.c
-\vspace{-3mm}
-\begin{alltt}
-016   
-017   /* b = |a| 
-018    *
-019    * Simple function copies the input and fixes the sign to positive
-020    */
-021   int
-022   mp_abs (mp_int * a, mp_int * b)
-023   \{
-024     int     res;
-025   
-026     /* copy a to b */
-027     if (a != b) \{
-028        if ((res = mp_copy (a, b)) != MP_OKAY) \{
-029          return res;
-030        \}
-031     \}
-032   
-033     /* force the sign of b to positive */
-034     b->sign = MP_ZPOS;
-035   
-036     return MP_OKAY;
-037   \}
-038   #endif
-\end{alltt}
-\end{small}
-
-This fairly trivial algorithm first eliminates non--required duplications (line 27) and then sets the
-\textbf{sign} flag to \textbf{MP\_ZPOS}.
-
-\subsection{Integer Negation}
-With the mp\_int representation of an integer, calculating the negation is also trivial.  The mp\_neg algorithm will compute
-the negative of an mp\_int input.
-
-\begin{figure}[here]
-\begin{center}
-\begin{tabular}{l}
-\hline Algorithm \textbf{mp\_neg}. \\
-\textbf{Input}.   An mp\_int $a$ \\
-\textbf{Output}.  Computes $b = -a$ \\
-\hline \\
-1.  Copy $a$ to $b$.  (\textit{mp\_copy}) \\
-2.  If the copy failed return(\textit{MP\_MEM}). \\
-3.  If $a.used = 0$ then return(\textit{MP\_OKAY}). \\
-4.  If $a.sign = MP\_ZPOS$ then do \\
-\hspace{3mm}4.1  $b.sign = MP\_NEG$. \\
-5.  else do \\
-\hspace{3mm}5.1  $b.sign = MP\_ZPOS$. \\
-6.  Return(\textit{MP\_OKAY}) \\
-\hline
-\end{tabular}
-\end{center}
-\caption{Algorithm mp\_neg}
-\end{figure}
-
-\textbf{Algorithm mp\_neg.}
-This algorithm computes the negation of an input.  First it copies $a$ over $b$.  If $a$ has no used digits then
-the algorithm returns immediately.  Otherwise it flips the sign flag and stores the result in $b$.  Note that if 
-$a$ had no digits then it must be positive by definition.  Had step three been omitted then the algorithm would return
-zero as negative.
-
-\vspace{+3mm}\begin{small}
-\hspace{-5.1mm}{\bf File}: bn\_mp\_neg.c
-\vspace{-3mm}
-\begin{alltt}
-016   
-017   /* b = -a */
-018   int mp_neg (mp_int * a, mp_int * b)
-019   \{
-020     int     res;
-021     if (a != b) \{
-022        if ((res = mp_copy (a, b)) != MP_OKAY) \{
-023           return res;
-024        \}
-025     \}
-026   
-027     if (mp_iszero(b) != MP_YES) \{
-028        b->sign = (a->sign == MP_ZPOS) ? MP_NEG : MP_ZPOS;
-029     \} else \{
-030        b->sign = MP_ZPOS;
-031     \}
-032   
-033     return MP_OKAY;
-034   \}
-035   #endif
-\end{alltt}
-\end{small}
-
-Like mp\_abs() this function avoids non--required duplications (line 21) and then sets the sign.  We
-have to make sure that only non--zero values get a \textbf{sign} of \textbf{MP\_NEG}.  If the mp\_int is zero
-than the \textbf{sign} is hard--coded to \textbf{MP\_ZPOS}.
-
-\section{Small Constants}
-\subsection{Setting Small Constants}
-Often a mp\_int must be set to a relatively small value such as $1$ or $2$.  For these cases the mp\_set algorithm is useful.
-
-\newpage\begin{figure}[here]
-\begin{center}
-\begin{tabular}{l}
-\hline Algorithm \textbf{mp\_set}. \\
-\textbf{Input}.   An mp\_int $a$ and a digit $b$ \\
-\textbf{Output}.  Make $a$ equivalent to $b$ \\
-\hline \\
-1.  Zero $a$ (\textit{mp\_zero}). \\
-2.  $a_0 \leftarrow b \mbox{ (mod }\beta\mbox{)}$ \\
-3.  $a.used \leftarrow  \left \lbrace \begin{array}{ll}
-                              1 &  \mbox{if }a_0 > 0 \\
-                              0 &  \mbox{if }a_0 = 0 
-                              \end{array} \right .$ \\
-\hline                              
-\end{tabular}
-\end{center}
-\caption{Algorithm mp\_set}
-\end{figure}
-
-\textbf{Algorithm mp\_set.}
-This algorithm sets a mp\_int to a small single digit value.  Step number 1 ensures that the integer is reset to the default state.  The
-single digit is set (\textit{modulo $\beta$}) and the \textbf{used} count is adjusted accordingly.
-
-\vspace{+3mm}\begin{small}
-\hspace{-5.1mm}{\bf File}: bn\_mp\_set.c
-\vspace{-3mm}
-\begin{alltt}
-016   
-017   /* set to a digit */
-018   void mp_set (mp_int * a, mp_digit b)
-019   \{
-020     mp_zero (a);
-021     a->dp[0] = b & MP_MASK;
-022     a->used  = (a->dp[0] != 0) ? 1 : 0;
-023   \}
-024   #endif
-\end{alltt}
-\end{small}
-
-First we zero (line 20) the mp\_int to make sure that the other members are initialized for a 
-small positive constant.  mp\_zero() ensures that the \textbf{sign} is positive and the \textbf{used} count
-is zero.  Next we set the digit and reduce it modulo $\beta$ (line 21).  After this step we have to 
-check if the resulting digit is zero or not.  If it is not then we set the \textbf{used} count to one, otherwise
-to zero.
-
-We can quickly reduce modulo $\beta$ since it is of the form $2^k$ and a quick binary AND operation with 
-$2^k - 1$ will perform the same operation.
-
-One important limitation of this function is that it will only set one digit.  The size of a digit is not fixed, meaning source that uses 
-this function should take that into account.  Only trivially small constants can be set using this function.
-
-\subsection{Setting Large Constants}
-To overcome the limitations of the mp\_set algorithm the mp\_set\_int algorithm is ideal.  It accepts a ``long''
-data type as input and will always treat it as a 32-bit integer.
-
-\begin{figure}[here]
-\begin{center}
-\begin{tabular}{l}
-\hline Algorithm \textbf{mp\_set\_int}. \\
-\textbf{Input}.   An mp\_int $a$ and a ``long'' integer $b$ \\
-\textbf{Output}.  Make $a$ equivalent to $b$ \\
-\hline \\
-1.  Zero $a$ (\textit{mp\_zero}) \\
-2.  for $n$ from 0 to 7 do \\
-\hspace{3mm}2.1  $a \leftarrow a \cdot 16$ (\textit{mp\_mul2d}) \\
-\hspace{3mm}2.2  $u \leftarrow \lfloor b / 2^{4(7 - n)} \rfloor \mbox{ (mod }16\mbox{)}$\\
-\hspace{3mm}2.3  $a_0 \leftarrow a_0 + u$ \\
-\hspace{3mm}2.4  $a.used \leftarrow a.used + 1$ \\
-3.  Clamp excess used digits (\textit{mp\_clamp}) \\
-\hline
-\end{tabular}
-\end{center}
-\caption{Algorithm mp\_set\_int}
-\end{figure}
-
-\textbf{Algorithm mp\_set\_int.}
-The algorithm performs eight iterations of a simple loop where in each iteration four bits from the source are added to the 
-mp\_int.  Step 2.1 will multiply the current result by sixteen making room for four more bits in the less significant positions.  In step 2.2 the
-next four bits from the source are extracted and are added to the mp\_int. The \textbf{used} digit count is 
-incremented to reflect the addition.  The \textbf{used} digit counter is incremented since if any of the leading digits were zero the mp\_int would have
-zero digits used and the newly added four bits would be ignored.
-
-Excess zero digits are trimmed in steps 2.1 and 3 by using higher level algorithms mp\_mul2d and mp\_clamp.
-
-\vspace{+3mm}\begin{small}
-\hspace{-5.1mm}{\bf File}: bn\_mp\_set\_int.c
-\vspace{-3mm}
-\begin{alltt}
-016   
-017   /* set a 32-bit const */
-018   int mp_set_int (mp_int * a, unsigned long b)
-019   \{
-020     int     x, res;
-021   
-022     mp_zero (a);
-023     
-024     /* set four bits at a time */
-025     for (x = 0; x < 8; x++) \{
-026       /* shift the number up four bits */
-027       if ((res = mp_mul_2d (a, 4, a)) != MP_OKAY) \{
-028         return res;
-029       \}
-030   
-031       /* OR in the top four bits of the source */
-032       a->dp[0] |= (b >> 28) & 15;
-033   
-034       /* shift the source up to the next four bits */
-035       b <<= 4;
-036   
-037       /* ensure that digits are not clamped off */
-038       a->used += 1;
-039     \}
-040     mp_clamp (a);
-041     return MP_OKAY;
-042   \}
-043   #endif
-\end{alltt}
-\end{small}
-
-This function sets four bits of the number at a time to handle all practical \textbf{DIGIT\_BIT} sizes.  The weird
-addition on line 38 ensures that the newly added in bits are added to the number of digits.  While it may not 
-seem obvious as to why the digit counter does not grow exceedingly large it is because of the shift on line 27 
-as well as the  call to mp\_clamp() on line 40.  Both functions will clamp excess leading digits which keeps 
-the number of used digits low.
-
-\section{Comparisons}
-\subsection{Unsigned Comparisions}
-Comparing a multiple precision integer is performed with the exact same algorithm used to compare two decimal numbers.  For example,
-to compare $1,234$ to $1,264$ the digits are extracted by their positions.  That is we compare $1 \cdot 10^3 + 2 \cdot 10^2 + 3 \cdot 10^1 + 4 \cdot 10^0$
-to $1 \cdot 10^3 + 2 \cdot 10^2 + 6 \cdot 10^1 + 4 \cdot 10^0$ by comparing single digits at a time starting with the highest magnitude 
-positions.  If any leading digit of one integer is greater than a digit in the same position of another integer then obviously it must be greater.  
-
-The first comparision routine that will be developed is the unsigned magnitude compare which will perform a comparison based on the digits of two
-mp\_int variables alone.  It will ignore the sign of the two inputs.  Such a function is useful when an absolute comparison is required or if the 
-signs are known to agree in advance.
-
-To facilitate working with the results of the comparison functions three constants are required.  
-
-\begin{figure}[here]
-\begin{center}
-\begin{tabular}{|r|l|}
-\hline \textbf{Constant} & \textbf{Meaning} \\
-\hline \textbf{MP\_GT} & Greater Than \\
-\hline \textbf{MP\_EQ} & Equal To \\
-\hline \textbf{MP\_LT} & Less Than \\
-\hline
-\end{tabular}
-\end{center}
-\caption{Comparison Return Codes}
-\end{figure}
-
-\begin{figure}[here]
-\begin{center}
-\begin{tabular}{l}
-\hline Algorithm \textbf{mp\_cmp\_mag}. \\
-\textbf{Input}.   Two mp\_ints $a$ and $b$.  \\
-\textbf{Output}.  Unsigned comparison results ($a$ to the left of $b$). \\
-\hline \\
-1.  If $a.used > b.used$ then return(\textit{MP\_GT}) \\
-2.  If $a.used < b.used$ then return(\textit{MP\_LT}) \\
-3.  for n from $a.used - 1$ to 0 do \\
-\hspace{+3mm}3.1  if $a_n > b_n$ then return(\textit{MP\_GT}) \\
-\hspace{+3mm}3.2  if $a_n < b_n$ then return(\textit{MP\_LT}) \\
-4.  Return(\textit{MP\_EQ}) \\
-\hline
-\end{tabular}
-\end{center}
-\caption{Algorithm mp\_cmp\_mag}
-\end{figure}
-
-\textbf{Algorithm mp\_cmp\_mag.}
-By saying ``$a$ to the left of $b$'' it is meant that the comparison is with respect to $a$, that is if $a$ is greater than $b$ it will return
-\textbf{MP\_GT} and similar with respect to when $a = b$ and $a < b$.  The first two steps compare the number of digits used in both $a$ and $b$.  
-Obviously if the digit counts differ there would be an imaginary zero digit in the smaller number where the leading digit of the larger number is.  
-If both have the same number of digits than the actual digits themselves must be compared starting at the leading digit.  
-
-By step three both inputs must have the same number of digits so its safe to start from either $a.used - 1$ or $b.used - 1$ and count down to
-the zero'th digit.  If after all of the digits have been compared, no difference is found, the algorithm returns \textbf{MP\_EQ}.
-
-\vspace{+3mm}\begin{small}
-\hspace{-5.1mm}{\bf File}: bn\_mp\_cmp\_mag.c
-\vspace{-3mm}
-\begin{alltt}
-016   
-017   /* compare maginitude of two ints (unsigned) */
-018   int mp_cmp_mag (mp_int * a, mp_int * b)
-019   \{
-020     int     n;
-021     mp_digit *tmpa, *tmpb;
-022   
-023     /* compare based on # of non-zero digits */
-024     if (a->used > b->used) \{
-025       return MP_GT;
-026     \}
-027     
-028     if (a->used < b->used) \{
-029       return MP_LT;
-030     \}
-031   
-032     /* alias for a */
-033     tmpa = a->dp + (a->used - 1);
-034   
-035     /* alias for b */
-036     tmpb = b->dp + (a->used - 1);
-037   
-038     /* compare based on digits  */
-039     for (n = 0; n < a->used; ++n, --tmpa, --tmpb) \{
-040       if (*tmpa > *tmpb) \{
-041         return MP_GT;
-042       \}
-043   
-044       if (*tmpa < *tmpb) \{
-045         return MP_LT;
-046       \}
-047     \}
-048     return MP_EQ;
-049   \}
-050   #endif
-\end{alltt}
-\end{small}
-
-The two if statements (lines 24 and 28) compare the number of digits in the two inputs.  These two are 
-performed before all of the digits are compared since it is a very cheap test to perform and can potentially save 
-considerable time.  The implementation given is also not valid without those two statements.  $b.alloc$ may be 
-smaller than $a.used$, meaning that undefined values will be read from $b$ past the end of the array of digits.
-
-
-
-\subsection{Signed Comparisons}
-Comparing with sign considerations is also fairly critical in several routines (\textit{division for example}).  Based on an unsigned magnitude 
-comparison a trivial signed comparison algorithm can be written.
-
-\begin{figure}[here]
-\begin{center}
-\begin{tabular}{l}
-\hline Algorithm \textbf{mp\_cmp}. \\
-\textbf{Input}.   Two mp\_ints $a$ and $b$ \\
-\textbf{Output}.  Signed Comparison Results ($a$ to the left of $b$) \\
-\hline \\
-1.  if $a.sign = MP\_NEG$ and $b.sign = MP\_ZPOS$ then return(\textit{MP\_LT}) \\
-2.  if $a.sign = MP\_ZPOS$ and $b.sign = MP\_NEG$ then return(\textit{MP\_GT}) \\
-3.  if $a.sign = MP\_NEG$ then \\
-\hspace{+3mm}3.1  Return the unsigned comparison of $b$ and $a$ (\textit{mp\_cmp\_mag}) \\
-4   Otherwise \\
-\hspace{+3mm}4.1  Return the unsigned comparison of $a$ and $b$ \\
-\hline
-\end{tabular}
-\end{center}
-\caption{Algorithm mp\_cmp}
-\end{figure}
-
-\textbf{Algorithm mp\_cmp.}
-The first two steps compare the signs of the two inputs.  If the signs do not agree then it can return right away with the appropriate 
-comparison code.  When the signs are equal the digits of the inputs must be compared to determine the correct result.  In step 
-three the unsigned comparision flips the order of the arguments since they are both negative.  For instance, if $-a > -b$ then 
-$\vert a \vert < \vert b \vert$.  Step number four will compare the two when they are both positive.
-
-\vspace{+3mm}\begin{small}
-\hspace{-5.1mm}{\bf File}: bn\_mp\_cmp.c
-\vspace{-3mm}
-\begin{alltt}
-016   
-017   /* compare two ints (signed)*/
-018   int
-019   mp_cmp (mp_int * a, mp_int * b)
-020   \{
-021     /* compare based on sign */
-022     if (a->sign != b->sign) \{
-023        if (a->sign == MP_NEG) \{
-024           return MP_LT;
-025        \} else \{
-026           return MP_GT;
-027        \}
-028     \}
-029     
-030     /* compare digits */
-031     if (a->sign == MP_NEG) \{
-032        /* if negative compare opposite direction */
-033        return mp_cmp_mag(b, a);
-034     \} else \{
-035        return mp_cmp_mag(a, b);
-036     \}
-037   \}
-038   #endif
-\end{alltt}
-\end{small}
-
-The two if statements (lines 22 and 23) perform the initial sign comparison.  If the signs are not the equal then which ever
-has the positive sign is larger.   The inputs are compared (line 31) based on magnitudes.  If the signs were both 
-negative then the unsigned comparison is performed in the opposite direction (line 33).  Otherwise, the signs are assumed to 
-be both positive and a forward direction unsigned comparison is performed.
-
-\section*{Exercises}
-\begin{tabular}{cl}
-$\left [ 2 \right ]$ & Modify algorithm mp\_set\_int to accept as input a variable length array of bits. \\
-                     & \\
-$\left [ 3 \right ]$ & Give the probability that algorithm mp\_cmp\_mag will have to compare $k$ digits  \\
-                     & of two random digits (of equal magnitude) before a difference is found. \\
-                     & \\
-$\left [ 1 \right ]$ & Suggest a simple method to speed up the implementation of mp\_cmp\_mag based  \\
-                     & on the observations made in the previous problem. \\
-                     &
-\end{tabular}
-
-\chapter{Basic Arithmetic}
-\section{Introduction}
-At this point algorithms for initialization, clearing, zeroing, copying, comparing and setting small constants have been 
-established.  The next logical set of algorithms to develop are addition, subtraction and digit shifting algorithms.  These 
-algorithms make use of the lower level algorithms and are the cruicial building block for the multiplication algorithms.  It is very important 
-that these algorithms are highly optimized.  On their own they are simple $O(n)$ algorithms but they can be called from higher level algorithms 
-which easily places them at $O(n^2)$ or even $O(n^3)$ work levels.  
-
-All of the algorithms within this chapter make use of the logical bit shift operations denoted by $<<$ and $>>$ for left and right 
-logical shifts respectively.  A logical shift is analogous to sliding the decimal point of radix-10 representations.  For example, the real 
-number $0.9345$ is equivalent to $93.45\%$ which is found by sliding the the decimal two places to the right (\textit{multiplying by $\beta^2 = 10^2$}).  
-Algebraically a binary logical shift is equivalent to a division or multiplication by a power of two.  
-For example, $a << k = a \cdot 2^k$ while $a >> k = \lfloor a/2^k \rfloor$.
-
-One significant difference between a logical shift and the way decimals are shifted is that digits below the zero'th position are removed
-from the number.  For example, consider $1101_2 >> 1$ using decimal notation this would produce $110.1_2$.  However, with a logical shift the 
-result is $110_2$.  
-
-\section{Addition and Subtraction}
-In common twos complement fixed precision arithmetic negative numbers are easily represented by subtraction from the modulus.  For example, with 32-bit integers
-$a - b\mbox{ (mod }2^{32}\mbox{)}$ is the same as $a + (2^{32} - b) \mbox{ (mod }2^{32}\mbox{)}$  since $2^{32} \equiv 0 \mbox{ (mod }2^{32}\mbox{)}$.  
-As a result subtraction can be performed with a trivial series of logical operations and an addition.
-
-However, in multiple precision arithmetic negative numbers are not represented in the same way.  Instead a sign flag is used to keep track of the
-sign of the integer.  As a result signed addition and subtraction are actually implemented as conditional usage of lower level addition or 
-subtraction algorithms with the sign fixed up appropriately.
-
-The lower level algorithms will add or subtract integers without regard to the sign flag.  That is they will add or subtract the magnitude of
-the integers respectively.
-
-\subsection{Low Level Addition}
-An unsigned addition of multiple precision integers is performed with the same long-hand algorithm used to add decimal numbers.  That is to add the 
-trailing digits first and propagate the resulting carry upwards.  Since this is a lower level algorithm the name will have a ``s\_'' prefix.  
-Historically that convention stems from the MPI library where ``s\_'' stood for static functions that were hidden from the developer entirely.
-
-\newpage
-\begin{figure}[!here]
-\begin{center}
-\begin{small}
-\begin{tabular}{l}
-\hline Algorithm \textbf{s\_mp\_add}. \\
-\textbf{Input}.   Two mp\_ints $a$ and $b$ \\
-\textbf{Output}.  The unsigned addition $c = \vert a \vert + \vert b \vert$. \\
-\hline \\
-1.  if $a.used > b.used$ then \\
-\hspace{+3mm}1.1  $min \leftarrow b.used$ \\
-\hspace{+3mm}1.2  $max \leftarrow a.used$ \\
-\hspace{+3mm}1.3  $x   \leftarrow a$ \\
-2.  else  \\
-\hspace{+3mm}2.1  $min \leftarrow a.used$ \\
-\hspace{+3mm}2.2  $max \leftarrow b.used$ \\
-\hspace{+3mm}2.3  $x   \leftarrow b$ \\
-3.  If $c.alloc < max + 1$ then grow $c$ to hold at least $max + 1$ digits (\textit{mp\_grow}) \\
-4.  $oldused \leftarrow c.used$ \\
-5.  $c.used \leftarrow max + 1$ \\
-6.  $u \leftarrow 0$ \\
-7.  for $n$ from $0$ to $min - 1$ do \\
-\hspace{+3mm}7.1  $c_n \leftarrow a_n + b_n + u$ \\
-\hspace{+3mm}7.2  $u \leftarrow c_n >> lg(\beta)$ \\
-\hspace{+3mm}7.3  $c_n \leftarrow c_n \mbox{ (mod }\beta\mbox{)}$ \\
-8.  if $min \ne max$ then do \\
-\hspace{+3mm}8.1  for $n$ from $min$ to $max - 1$ do \\
-\hspace{+6mm}8.1.1  $c_n \leftarrow x_n + u$ \\
-\hspace{+6mm}8.1.2  $u \leftarrow c_n >> lg(\beta)$ \\
-\hspace{+6mm}8.1.3  $c_n \leftarrow c_n \mbox{ (mod }\beta\mbox{)}$ \\
-9.  $c_{max} \leftarrow u$ \\
-10.  if $olduse > max$ then \\
-\hspace{+3mm}10.1  for $n$ from $max + 1$ to $oldused - 1$ do \\
-\hspace{+6mm}10.1.1  $c_n \leftarrow 0$ \\
-11.  Clamp excess digits in $c$.  (\textit{mp\_clamp}) \\
-12.  Return(\textit{MP\_OKAY}) \\
-\hline
-\end{tabular}
-\end{small}
-\end{center}
-\caption{Algorithm s\_mp\_add}
-\end{figure}
-
-\textbf{Algorithm s\_mp\_add.}
-This algorithm is loosely based on algorithm 14.7 of HAC \cite[pp. 594]{HAC} but has been extended to allow the inputs to have different magnitudes.  
-Coincidentally the description of algorithm A in Knuth \cite[pp. 266]{TAOCPV2} shares the same deficiency as the algorithm from \cite{HAC}.  Even the 
-MIX pseudo  machine code presented by Knuth \cite[pp. 266-267]{TAOCPV2} is incapable of handling inputs which are of different magnitudes.
-
-The first thing that has to be accomplished is to sort out which of the two inputs is the largest.  The addition logic
-will simply add all of the smallest input to the largest input and store that first part of the result in the
-destination.  Then it will apply a simpler addition loop to excess digits of the larger input.
-
-The first two steps will handle sorting the inputs such that $min$ and $max$ hold the digit counts of the two 
-inputs.  The variable $x$ will be an mp\_int alias for the largest input or the second input $b$ if they have the
-same number of digits.  After the inputs are sorted the destination $c$ is grown as required to accomodate the sum 
-of the two inputs.  The original \textbf{used} count of $c$ is copied and set to the new used count.  
-
-At this point the first addition loop will go through as many digit positions that both inputs have.  The carry
-variable $\mu$ is set to zero outside the loop.  Inside the loop an ``addition'' step requires three statements to produce
-one digit of the summand.  First
-two digits from $a$ and $b$ are added together along with the carry $\mu$.  The carry of this step is extracted and stored
-in $\mu$ and finally the digit of the result $c_n$ is truncated within the range $0 \le c_n < \beta$.
-
-Now all of the digit positions that both inputs have in common have been exhausted.  If $min \ne max$ then $x$ is an alias
-for one of the inputs that has more digits.  A simplified addition loop is then used to essentially copy the remaining digits
-and the carry to the destination.
-
-The final carry is stored in $c_{max}$ and digits above $max$ upto $oldused$ are zeroed which completes the addition.
-
-
-\vspace{+3mm}\begin{small}
-\hspace{-5.1mm}{\bf File}: bn\_s\_mp\_add.c
-\vspace{-3mm}
-\begin{alltt}
-016   
-017   /* low level addition, based on HAC pp.594, Algorithm 14.7 */
-018   int
-019   s_mp_add (mp_int * a, mp_int * b, mp_int * c)
-020   \{
-021     mp_int *x;
-022     int     olduse, res, min, max;
-023   
-024     /* find sizes, we let |a| <= |b| which means we have to sort
-025      * them.  "x" will point to the input with the most digits
-026      */
-027     if (a->used > b->used) \{
-028       min = b->used;
-029       max = a->used;
-030       x = a;
-031     \} else \{
-032       min = a->used;
-033       max = b->used;
-034       x = b;
-035     \}
-036   
-037     /* init result */
-038     if (c->alloc < max + 1) \{
-039       if ((res = mp_grow (c, max + 1)) != MP_OKAY) \{
-040         return res;
-041       \}
-042     \}
-043   
-044     /* get old used digit count and set new one */
-045     olduse = c->used;
-046     c->used = max + 1;
-047   
-048     \{
-049       register mp_digit u, *tmpa, *tmpb, *tmpc;
-050       register int i;
-051   
-052       /* alias for digit pointers */
-053   
-054       /* first input */
-055       tmpa = a->dp;
-056   
-057       /* second input */
-058       tmpb = b->dp;
-059   
-060       /* destination */
-061       tmpc = c->dp;
-062   
-063       /* zero the carry */
-064       u = 0;
-065       for (i = 0; i < min; i++) \{
-066         /* Compute the sum at one digit, T[i] = A[i] + B[i] + U */
-067         *tmpc = *tmpa++ + *tmpb++ + u;
-068   
-069         /* U = carry bit of T[i] */
-070         u = *tmpc >> ((mp_digit)DIGIT_BIT);
-071   
-072         /* take away carry bit from T[i] */
-073         *tmpc++ &= MP_MASK;
-074       \}
-075   
-076       /* now copy higher words if any, that is in A+B 
-077        * if A or B has more digits add those in 
-078        */
-079       if (min != max) \{
-080         for (; i < max; i++) \{
-081           /* T[i] = X[i] + U */
-082           *tmpc = x->dp[i] + u;
-083   
-084           /* U = carry bit of T[i] */
-085           u = *tmpc >> ((mp_digit)DIGIT_BIT);
-086   
-087           /* take away carry bit from T[i] */
-088           *tmpc++ &= MP_MASK;
-089         \}
-090       \}
-091   
-092       /* add carry */
-093       *tmpc++ = u;
-094   
-095       /* clear digits above oldused */
-096       for (i = c->used; i < olduse; i++) \{
-097         *tmpc++ = 0;
-098       \}
-099     \}
-100   
-101     mp_clamp (c);
-102     return MP_OKAY;
-103   \}
-104   #endif
-\end{alltt}
-\end{small}
-
-We first sort (lines 27 to 35) the inputs based on magnitude and determine the $min$ and $max$ variables.
-Note that $x$ is a pointer to an mp\_int assigned to the largest input, in effect it is a local alias.  Next we
-grow the destination (37 to 42) ensure that it can accomodate the result of the addition. 
-
-Similar to the implementation of mp\_copy this function uses the braced code and local aliases coding style.  The three aliases that are on 
-lines 55, 58 and 61 represent the two inputs and destination variables respectively.  These aliases are used to ensure the
-compiler does not have to dereference $a$, $b$ or $c$ (respectively) to access the digits of the respective mp\_int.
-
-The initial carry $u$ will be cleared (line 64), note that $u$ is of type mp\_digit which ensures type 
-compatibility within the implementation.  The initial addition (line 65 to 74) adds digits from
-both inputs until the smallest input runs out of digits.  Similarly the conditional addition loop
-(line 80 to 90) adds the remaining digits from the larger of the two inputs.  The addition is finished 
-with the final carry being stored in $tmpc$ (line 93).  Note the ``++'' operator within the same expression.
-After line 93, $tmpc$ will point to the $c.used$'th digit of the mp\_int $c$.  This is useful
-for the next loop (line 96 to 99) which set any old upper digits to zero.
-
-\subsection{Low Level Subtraction}
-The low level unsigned subtraction algorithm is very similar to the low level unsigned addition algorithm.  The principle difference is that the
-unsigned subtraction algorithm requires the result to be positive.  That is when computing $a - b$ the condition $\vert a \vert \ge \vert b\vert$ must 
-be met for this algorithm to function properly.  Keep in mind this low level algorithm is not meant to be used in higher level algorithms directly.  
-This algorithm as will be shown can be used to create functional signed addition and subtraction algorithms.
-
-
-For this algorithm a new variable is required to make the description simpler.  Recall from section 1.3.1 that a mp\_digit must be able to represent
-the range $0 \le x < 2\beta$ for the algorithms to work correctly.  However, it is allowable that a mp\_digit represent a larger range of values.  For 
-this algorithm we will assume that the variable $\gamma$ represents the number of bits available in a 
-mp\_digit (\textit{this implies $2^{\gamma} > \beta$}).  
-
-For example, the default for LibTomMath is to use a ``unsigned long'' for the mp\_digit ``type'' while $\beta = 2^{28}$.  In ISO C an ``unsigned long''
-data type must be able to represent $0 \le x < 2^{32}$ meaning that in this case $\gamma \ge 32$.
-
-\newpage\begin{figure}[!here]
-\begin{center}
-\begin{small}
-\begin{tabular}{l}
-\hline Algorithm \textbf{s\_mp\_sub}. \\
-\textbf{Input}.   Two mp\_ints $a$ and $b$ ($\vert a \vert \ge \vert b \vert$) \\
-\textbf{Output}.  The unsigned subtraction $c = \vert a \vert - \vert b \vert$. \\
-\hline \\
-1.  $min \leftarrow b.used$ \\
-2.  $max \leftarrow a.used$ \\
-3.  If $c.alloc < max$ then grow $c$ to hold at least $max$ digits.  (\textit{mp\_grow}) \\
-4.  $oldused \leftarrow c.used$ \\ 
-5.  $c.used \leftarrow max$ \\
-6.  $u \leftarrow 0$ \\
-7.  for $n$ from $0$ to $min - 1$ do \\
-\hspace{3mm}7.1  $c_n \leftarrow a_n - b_n - u$ \\
-\hspace{3mm}7.2  $u   \leftarrow c_n >> (\gamma - 1)$ \\
-\hspace{3mm}7.3  $c_n \leftarrow c_n \mbox{ (mod }\beta\mbox{)}$ \\
-8.  if $min < max$ then do \\
-\hspace{3mm}8.1  for $n$ from $min$ to $max - 1$ do \\
-\hspace{6mm}8.1.1  $c_n \leftarrow a_n - u$ \\
-\hspace{6mm}8.1.2  $u   \leftarrow c_n >> (\gamma - 1)$ \\
-\hspace{6mm}8.1.3  $c_n \leftarrow c_n \mbox{ (mod }\beta\mbox{)}$ \\
-9. if $oldused > max$ then do \\
-\hspace{3mm}9.1  for $n$ from $max$ to $oldused - 1$ do \\
-\hspace{6mm}9.1.1  $c_n \leftarrow 0$ \\
-10. Clamp excess digits of $c$.  (\textit{mp\_clamp}). \\
-11. Return(\textit{MP\_OKAY}). \\
-\hline
-\end{tabular}
-\end{small}
-\end{center}
-\caption{Algorithm s\_mp\_sub}
-\end{figure}
-
-\textbf{Algorithm s\_mp\_sub.}
-This algorithm performs the unsigned subtraction of two mp\_int variables under the restriction that the result must be positive.  That is when
-passing variables $a$ and $b$ the condition that $\vert a \vert \ge \vert b \vert$ must be met for the algorithm to function correctly.  This
-algorithm is loosely based on algorithm 14.9 \cite[pp. 595]{HAC} and is similar to algorithm S in \cite[pp. 267]{TAOCPV2} as well.  As was the case
-of the algorithm s\_mp\_add both other references lack discussion concerning various practical details such as when the inputs differ in magnitude.
-
-The initial sorting of the inputs is trivial in this algorithm since $a$ is guaranteed to have at least the same magnitude of $b$.  Steps 1 and 2 
-set the $min$ and $max$ variables.  Unlike the addition routine there is guaranteed to be no carry which means that the final result can be at 
-most $max$ digits in length as opposed to $max + 1$.  Similar to the addition algorithm the \textbf{used} count of $c$ is copied locally and 
-set to the maximal count for the operation.
-
-The subtraction loop that begins on step seven is essentially the same as the addition loop of algorithm s\_mp\_add except single precision 
-subtraction is used instead.  Note the use of the $\gamma$ variable to extract the carry (\textit{also known as the borrow}) within the subtraction 
-loops.  Under the assumption that two's complement single precision arithmetic is used this will successfully extract the desired carry.  
-
-For example, consider subtracting $0101_2$ from $0100_2$ where $\gamma = 4$ and $\beta = 2$.  The least significant bit will force a carry upwards to 
-the third bit which will be set to zero after the borrow.  After the very first bit has been subtracted $4 - 1 \equiv 0011_2$ will remain,  When the 
-third bit of $0101_2$ is subtracted from the result it will cause another carry.  In this case though the carry will be forced to propagate all the 
-way to the most significant bit.  
-
-Recall that $\beta < 2^{\gamma}$.  This means that if a carry does occur just before the $lg(\beta)$'th bit it will propagate all the way to the most 
-significant bit.  Thus, the high order bits of the mp\_digit that are not part of the actual digit will either be all zero, or all one. All that
-is needed is a single zero or one bit for the carry.  Therefore a single logical shift right by $\gamma - 1$ positions is sufficient to extract the 
-carry.  This method of carry extraction may seem awkward but the reason for it becomes apparent when the implementation is discussed.  
-
-If $b$ has a smaller magnitude than $a$ then step 9 will force the carry and copy operation to propagate through the larger input $a$ into $c$.  Step
-10 will ensure that any leading digits of $c$ above the $max$'th position are zeroed.
-
-\vspace{+3mm}\begin{small}
-\hspace{-5.1mm}{\bf File}: bn\_s\_mp\_sub.c
-\vspace{-3mm}
-\begin{alltt}
-016   
-017   /* low level subtraction (assumes |a| > |b|), HAC pp.595 Algorithm 14.9 */
-018   int
-019   s_mp_sub (mp_int * a, mp_int * b, mp_int * c)
-020   \{
-021     int     olduse, res, min, max;
-022   
-023     /* find sizes */
-024     min = b->used;
-025     max = a->used;
-026   
-027     /* init result */
-028     if (c->alloc < max) \{
-029       if ((res = mp_grow (c, max)) != MP_OKAY) \{
-030         return res;
-031       \}
-032     \}
-033     olduse = c->used;
-034     c->used = max;
-035   
-036     \{
-037       register mp_digit u, *tmpa, *tmpb, *tmpc;
-038       register int i;
-039   
-040       /* alias for digit pointers */
-041       tmpa = a->dp;
-042       tmpb = b->dp;
-043       tmpc = c->dp;
-044   
-045       /* set carry to zero */
-046       u = 0;
-047       for (i = 0; i < min; i++) \{
-048         /* T[i] = A[i] - B[i] - U */
-049         *tmpc = *tmpa++ - *tmpb++ - u;
-050   
-051         /* U = carry bit of T[i]
-052          * Note this saves performing an AND operation since
-053          * if a carry does occur it will propagate all the way to the
-054          * MSB.  As a result a single shift is enough to get the carry
-055          */
-056         u = *tmpc >> ((mp_digit)(CHAR_BIT * sizeof (mp_digit) - 1));
-057   
-058         /* Clear carry from T[i] */
-059         *tmpc++ &= MP_MASK;
-060       \}
-061   
-062       /* now copy higher words if any, e.g. if A has more digits than B  */
-063       for (; i < max; i++) \{
-064         /* T[i] = A[i] - U */
-065         *tmpc = *tmpa++ - u;
-066   
-067         /* U = carry bit of T[i] */
-068         u = *tmpc >> ((mp_digit)(CHAR_BIT * sizeof (mp_digit) - 1));
-069   
-070         /* Clear carry from T[i] */
-071         *tmpc++ &= MP_MASK;
-072       \}
-073   
-074       /* clear digits above used (since we may not have grown result above) */
-      
-075       for (i = c->used; i < olduse; i++) \{
-076         *tmpc++ = 0;
-077       \}
-078     \}
-079   
-080     mp_clamp (c);
-081     return MP_OKAY;
-082   \}
-083   
-084   #endif
-\end{alltt}
-\end{small}
-
-Like low level addition we ``sort'' the inputs.  Except in this case the sorting is hardcoded 
-(lines 24 and 25).  In reality the $min$ and $max$ variables are only aliases and are only 
-used to make the source code easier to read.  Again the pointer alias optimization is used 
-within this algorithm.  The aliases $tmpa$, $tmpb$ and $tmpc$ are initialized
-(lines 41, 42 and 43) for $a$, $b$ and $c$ respectively.
-
-The first subtraction loop (lines 46 through 60) subtract digits from both inputs until the smaller of
-the two inputs has been exhausted.  As remarked earlier there is an implementation reason for using the ``awkward'' 
-method of extracting the carry (line 56).  The traditional method for extracting the carry would be to shift 
-by $lg(\beta)$ positions and logically AND the least significant bit.  The AND operation is required because all of 
-the bits above the $\lg(\beta)$'th bit will be set to one after a carry occurs from subtraction.  This carry 
-extraction requires two relatively cheap operations to extract the carry.  The other method is to simply shift the 
-most significant bit to the least significant bit thus extracting the carry with a single cheap operation.  This 
-optimization only works on twos compliment machines which is a safe assumption to make.
-
-If $a$ has a larger magnitude than $b$ an additional loop (lines 63 through 72) is required to propagate 
-the carry through $a$ and copy the result to $c$.  
-
-\subsection{High Level Addition}
-Now that both lower level addition and subtraction algorithms have been established an effective high level signed addition algorithm can be
-established.  This high level addition algorithm will be what other algorithms and developers will use to perform addition of mp\_int data 
-types.  
-
-Recall from section 5.2 that an mp\_int represents an integer with an unsigned mantissa (\textit{the array of digits}) and a \textbf{sign} 
-flag.  A high level addition is actually performed as a series of eight separate cases which can be optimized down to three unique cases.
-
-\begin{figure}[!here]
-\begin{center}
-\begin{tabular}{l}
-\hline Algorithm \textbf{mp\_add}. \\
-\textbf{Input}.   Two mp\_ints $a$ and $b$  \\
-\textbf{Output}.  The signed addition $c = a + b$. \\
-\hline \\
-1.  if $a.sign = b.sign$ then do \\
-\hspace{3mm}1.1  $c.sign \leftarrow a.sign$  \\
-\hspace{3mm}1.2  $c \leftarrow \vert a \vert + \vert b \vert$ (\textit{s\_mp\_add})\\
-2.  else do \\
-\hspace{3mm}2.1  if $\vert a \vert < \vert b \vert$ then do (\textit{mp\_cmp\_mag})  \\
-\hspace{6mm}2.1.1  $c.sign \leftarrow b.sign$ \\
-\hspace{6mm}2.1.2  $c \leftarrow \vert b \vert - \vert a \vert$ (\textit{s\_mp\_sub}) \\
-\hspace{3mm}2.2  else do \\
-\hspace{6mm}2.2.1  $c.sign \leftarrow a.sign$ \\
-\hspace{6mm}2.2.2  $c \leftarrow \vert a \vert - \vert b \vert$ \\
-3.  Return(\textit{MP\_OKAY}). \\
-\hline
-\end{tabular}
-\end{center}
-\caption{Algorithm mp\_add}
-\end{figure}
-
-\textbf{Algorithm mp\_add.}
-This algorithm performs the signed addition of two mp\_int variables.  There is no reference algorithm to draw upon from 
-either \cite{TAOCPV2} or \cite{HAC} since they both only provide unsigned operations.  The algorithm is fairly 
-straightforward but restricted since subtraction can only produce positive results.
-
-\begin{figure}[here]
-\begin{small}
-\begin{center}
-\begin{tabular}{|c|c|c|c|c|}
-\hline \textbf{Sign of $a$} & \textbf{Sign of $b$} & \textbf{$\vert a \vert > \vert b \vert $} & \textbf{Unsigned Operation} & \textbf{Result Sign Flag} \\
-\hline $+$ & $+$ & Yes & $c = a + b$ & $a.sign$ \\
-\hline $+$ & $+$ & No  & $c = a + b$ & $a.sign$ \\
-\hline $-$ & $-$ & Yes & $c = a + b$ & $a.sign$ \\
-\hline $-$ & $-$ & No  & $c = a + b$ & $a.sign$ \\
-\hline &&&&\\
-
-\hline $+$ & $-$ & No  & $c = b - a$ & $b.sign$ \\
-\hline $-$ & $+$ & No  & $c = b - a$ & $b.sign$ \\
-
-\hline &&&&\\
-
-\hline $+$ & $-$ & Yes & $c = a - b$ & $a.sign$ \\
-\hline $-$ & $+$ & Yes & $c = a - b$ & $a.sign$ \\
-
-\hline
-\end{tabular}
-\end{center}
-\end{small}
-\caption{Addition Guide Chart}
-\label{fig:AddChart}
-\end{figure}
-
-Figure~\ref{fig:AddChart} lists all of the eight possible input combinations and is sorted to show that only three 
-specific cases need to be handled.  The return code of the unsigned operations at step 1.2, 2.1.2 and 2.2.2 are 
-forwarded to step three to check for errors.  This simplifies the description of the algorithm considerably and best 
-follows how the implementation actually was achieved.
-
-Also note how the \textbf{sign} is set before the unsigned addition or subtraction is performed.  Recall from the descriptions of algorithms
-s\_mp\_add and s\_mp\_sub that the mp\_clamp function is used at the end to trim excess digits.  The mp\_clamp algorithm will set the \textbf{sign}
-to \textbf{MP\_ZPOS} when the \textbf{used} digit count reaches zero.
-
-For example, consider performing $-a + a$ with algorithm mp\_add.  By the description of the algorithm the sign is set to \textbf{MP\_NEG} which would
-produce a result of $-0$.  However, since the sign is set first then the unsigned addition is performed the subsequent usage of algorithm mp\_clamp 
-within algorithm s\_mp\_add will force $-0$ to become $0$.  
-
-\vspace{+3mm}\begin{small}
-\hspace{-5.1mm}{\bf File}: bn\_mp\_add.c
-\vspace{-3mm}
-\begin{alltt}
-016   
-017   /* high level addition (handles signs) */
-018   int mp_add (mp_int * a, mp_int * b, mp_int * c)
-019   \{
-020     int     sa, sb, res;
-021   
-022     /* get sign of both inputs */
-023     sa = a->sign;
-024     sb = b->sign;
-025   
-026     /* handle two cases, not four */
-027     if (sa == sb) \{
-028       /* both positive or both negative */
-029       /* add their magnitudes, copy the sign */
-030       c->sign = sa;
-031       res = s_mp_add (a, b, c);
-032     \} else \{
-033       /* one positive, the other negative */
-034       /* subtract the one with the greater magnitude from */
-035       /* the one of the lesser magnitude.  The result gets */
-036       /* the sign of the one with the greater magnitude. */
-037       if (mp_cmp_mag (a, b) == MP_LT) \{
-038         c->sign = sb;
-039         res = s_mp_sub (b, a, c);
-040       \} else \{
-041         c->sign = sa;
-042         res = s_mp_sub (a, b, c);
-043       \}
-044     \}
-045     return res;
-046   \}
-047   
-048   #endif
-\end{alltt}
-\end{small}
-
-The source code follows the algorithm fairly closely.  The most notable new source code addition is the usage of the $res$ integer variable which
-is used to pass result of the unsigned operations forward.  Unlike in the algorithm, the variable $res$ is merely returned as is without
-explicitly checking it and returning the constant \textbf{MP\_OKAY}.  The observation is this algorithm will succeed or fail only if the lower
-level functions do so.  Returning their return code is sufficient.
-
-\subsection{High Level Subtraction}
-The high level signed subtraction algorithm is essentially the same as the high level signed addition algorithm.  
-
-\newpage\begin{figure}[!here]
-\begin{center}
-\begin{tabular}{l}
-\hline Algorithm \textbf{mp\_sub}. \\
-\textbf{Input}.   Two mp\_ints $a$ and $b$  \\
-\textbf{Output}.  The signed subtraction $c = a - b$. \\
-\hline \\
-1.  if $a.sign \ne b.sign$ then do \\
-\hspace{3mm}1.1  $c.sign \leftarrow a.sign$ \\
-\hspace{3mm}1.2  $c \leftarrow \vert a \vert + \vert b \vert$ (\textit{s\_mp\_add}) \\
-2.  else do \\
-\hspace{3mm}2.1  if $\vert a \vert \ge \vert b \vert$ then do (\textit{mp\_cmp\_mag}) \\
-\hspace{6mm}2.1.1  $c.sign \leftarrow a.sign$ \\
-\hspace{6mm}2.1.2  $c \leftarrow \vert a \vert  - \vert b \vert$ (\textit{s\_mp\_sub}) \\
-\hspace{3mm}2.2  else do \\
-\hspace{6mm}2.2.1  $c.sign \leftarrow  \left \lbrace \begin{array}{ll}
-                              MP\_ZPOS &  \mbox{if }a.sign = MP\_NEG \\
-                              MP\_NEG  &  \mbox{otherwise} \\
-                              \end{array} \right .$ \\
-\hspace{6mm}2.2.2  $c \leftarrow \vert b \vert  - \vert a \vert$ \\
-3.  Return(\textit{MP\_OKAY}). \\
-\hline
-\end{tabular}
-\end{center}
-\caption{Algorithm mp\_sub}
-\end{figure}
-
-\textbf{Algorithm mp\_sub.}
-This algorithm performs the signed subtraction of two inputs.  Similar to algorithm mp\_add there is no reference in either \cite{TAOCPV2} or 
-\cite{HAC}.  Also this algorithm is restricted by algorithm s\_mp\_sub.  Chart \ref{fig:SubChart} lists the eight possible inputs and
-the operations required.
-
-\begin{figure}[!here]
-\begin{small}
-\begin{center}
-\begin{tabular}{|c|c|c|c|c|}
-\hline \textbf{Sign of $a$} & \textbf{Sign of $b$} & \textbf{$\vert a \vert \ge \vert b \vert $} & \textbf{Unsigned Operation} & \textbf{Result Sign Flag} \\
-\hline $+$ & $-$ & Yes & $c = a + b$ & $a.sign$ \\
-\hline $+$ & $-$ & No  & $c = a + b$ & $a.sign$ \\
-\hline $-$ & $+$ & Yes & $c = a + b$ & $a.sign$ \\
-\hline $-$ & $+$ & No  & $c = a + b$ & $a.sign$ \\
-\hline &&&& \\
-\hline $+$ & $+$ & Yes & $c = a - b$ & $a.sign$ \\
-\hline $-$ & $-$ & Yes & $c = a - b$ & $a.sign$ \\
-\hline &&&& \\
-\hline $+$ & $+$ & No  & $c = b - a$ & $\mbox{opposite of }a.sign$ \\
-\hline $-$ & $-$ & No  & $c = b - a$ & $\mbox{opposite of }a.sign$ \\
-\hline
-\end{tabular}
-\end{center}
-\end{small}
-\caption{Subtraction Guide Chart}
-\label{fig:SubChart}
-\end{figure}
-
-Similar to the case of algorithm mp\_add the \textbf{sign} is set first before the unsigned addition or subtraction.  That is to prevent the 
-algorithm from producing $-a - -a = -0$ as a result.  
-
-\vspace{+3mm}\begin{small}
-\hspace{-5.1mm}{\bf File}: bn\_mp\_sub.c
-\vspace{-3mm}
-\begin{alltt}
-016   
-017   /* high level subtraction (handles signs) */
-018   int
-019   mp_sub (mp_int * a, mp_int * b, mp_int * c)
-020   \{
-021     int     sa, sb, res;
-022   
-023     sa = a->sign;
-024     sb = b->sign;
-025   
-026     if (sa != sb) \{
-027       /* subtract a negative from a positive, OR */
-028       /* subtract a positive from a negative. */
-029       /* In either case, ADD their magnitudes, */
-030       /* and use the sign of the first number. */
-031       c->sign = sa;
-032       res = s_mp_add (a, b, c);
-033     \} else \{
-034       /* subtract a positive from a positive, OR */
-035       /* subtract a negative from a negative. */
-036       /* First, take the difference between their */
-037       /* magnitudes, then... */
-038       if (mp_cmp_mag (a, b) != MP_LT) \{
-039         /* Copy the sign from the first */
-040         c->sign = sa;
-041         /* The first has a larger or equal magnitude */
-042         res = s_mp_sub (a, b, c);
-043       \} else \{
-044         /* The result has the *opposite* sign from */
-045         /* the first number. */
-046         c->sign = (sa == MP_ZPOS) ? MP_NEG : MP_ZPOS;
-047         /* The second has a larger magnitude */
-048         res = s_mp_sub (b, a, c);
-049       \}
-050     \}
-051     return res;
-052   \}
-053   
-054   #endif
-\end{alltt}
-\end{small}
-
-Much like the implementation of algorithm mp\_add the variable $res$ is used to catch the return code of the unsigned addition or subtraction operations
-and forward it to the end of the function.  On line 38 the ``not equal to'' \textbf{MP\_LT} expression is used to emulate a 
-``greater than or equal to'' comparison.  
-
-\section{Bit and Digit Shifting}
-It is quite common to think of a multiple precision integer as a polynomial in $x$, that is $y = f(\beta)$ where $f(x) = \sum_{i=0}^{n-1} a_i x^i$.  
-This notation arises within discussion of Montgomery and Diminished Radix Reduction as well as Karatsuba multiplication and squaring.  
-
-In order to facilitate operations on polynomials in $x$ as above a series of simple ``digit'' algorithms have to be established.  That is to shift
-the digits left or right as well to shift individual bits of the digits left and right.  It is important to note that not all ``shift'' operations
-are on radix-$\beta$ digits.  
-
-\subsection{Multiplication by Two}
-
-In a binary system where the radix is a power of two multiplication by two not only arises often in other algorithms it is a fairly efficient 
-operation to perform.  A single precision logical shift left is sufficient to multiply a single digit by two.  
-
-\newpage\begin{figure}[!here]
-\begin{small}
-\begin{center}
-\begin{tabular}{l}
-\hline Algorithm \textbf{mp\_mul\_2}. \\
-\textbf{Input}.   One mp\_int $a$ \\
-\textbf{Output}.  $b = 2a$. \\
-\hline \\
-1.  If $b.alloc < a.used + 1$ then grow $b$ to hold $a.used + 1$ digits.  (\textit{mp\_grow}) \\
-2.  $oldused \leftarrow b.used$ \\
-3.  $b.used \leftarrow a.used$ \\
-4.  $r \leftarrow 0$ \\
-5.  for $n$ from 0 to $a.used - 1$ do \\
-\hspace{3mm}5.1  $rr \leftarrow a_n >> (lg(\beta) - 1)$ \\
-\hspace{3mm}5.2  $b_n \leftarrow (a_n << 1) + r \mbox{ (mod }\beta\mbox{)}$ \\
-\hspace{3mm}5.3  $r \leftarrow rr$ \\
-6.  If $r \ne 0$ then do \\
-\hspace{3mm}6.1  $b_{n + 1} \leftarrow r$ \\
-\hspace{3mm}6.2  $b.used \leftarrow b.used + 1$ \\
-7.  If $b.used < oldused - 1$ then do \\
-\hspace{3mm}7.1  for $n$ from $b.used$ to $oldused - 1$ do \\
-\hspace{6mm}7.1.1  $b_n \leftarrow 0$ \\
-8.  $b.sign \leftarrow a.sign$ \\
-9.  Return(\textit{MP\_OKAY}).\\
-\hline
-\end{tabular}
-\end{center}
-\end{small}
-\caption{Algorithm mp\_mul\_2}
-\end{figure}
-
-\textbf{Algorithm mp\_mul\_2.}
-This algorithm will quickly multiply a mp\_int by two provided $\beta$ is a power of two.  Neither \cite{TAOCPV2} nor \cite{HAC} describe such 
-an algorithm despite the fact it arises often in other algorithms.  The algorithm is setup much like the lower level algorithm s\_mp\_add since 
-it is for all intents and purposes equivalent to the operation $b = \vert a \vert + \vert a \vert$.  
-
-Step 1 and 2 grow the input as required to accomodate the maximum number of \textbf{used} digits in the result.  The initial \textbf{used} count
-is set to $a.used$ at step 4.  Only if there is a final carry will the \textbf{used} count require adjustment.
-
-Step 6 is an optimization implementation of the addition loop for this specific case.  That is since the two values being added together 
-are the same there is no need to perform two reads from the digits of $a$.  Step 6.1 performs a single precision shift on the current digit $a_n$ to
-obtain what will be the carry for the next iteration.  Step 6.2 calculates the $n$'th digit of the result as single precision shift of $a_n$ plus
-the previous carry.  Recall from section 4.1 that $a_n << 1$ is equivalent to $a_n \cdot 2$.  An iteration of the addition loop is finished with 
-forwarding the carry to the next iteration.
-
-Step 7 takes care of any final carry by setting the $a.used$'th digit of the result to the carry and augmenting the \textbf{used} count of $b$.  
-Step 8 clears any leading digits of $b$ in case it originally had a larger magnitude than $a$.
-
-\vspace{+3mm}\begin{small}
-\hspace{-5.1mm}{\bf File}: bn\_mp\_mul\_2.c
-\vspace{-3mm}
-\begin{alltt}
-016   
-017   /* b = a*2 */
-018   int mp_mul_2(mp_int * a, mp_int * b)
-019   \{
-020     int     x, res, oldused;
-021   
-022     /* grow to accomodate result */
-023     if (b->alloc < a->used + 1) \{
-024       if ((res = mp_grow (b, a->used + 1)) != MP_OKAY) \{
-025         return res;
-026       \}
-027     \}
-028   
-029     oldused = b->used;
-030     b->used = a->used;
-031   
-032     \{
-033       register mp_digit r, rr, *tmpa, *tmpb;
-034   
-035       /* alias for source */
-036       tmpa = a->dp;
-037       
-038       /* alias for dest */
-039       tmpb = b->dp;
-040   
-041       /* carry */
-042       r = 0;
-043       for (x = 0; x < a->used; x++) \{
-044       
-045         /* get what will be the *next* carry bit from the 
-046          * MSB of the current digit 
-047          */
-048         rr = *tmpa >> ((mp_digit)(DIGIT_BIT - 1));
-049         
-050         /* now shift up this digit, add in the carry [from the previous] */
-051         *tmpb++ = ((*tmpa++ << ((mp_digit)1)) | r) & MP_MASK;
-052         
-053         /* copy the carry that would be from the source 
-054          * digit into the next iteration 
-055          */
-056         r = rr;
-057       \}
-058   
-059       /* new leading digit? */
-060       if (r != 0) \{
-061         /* add a MSB which is always 1 at this point */
-062         *tmpb = 1;
-063         ++(b->used);
-064       \}
-065   
-066       /* now zero any excess digits on the destination 
-067        * that we didn't write to 
-068        */
-069       tmpb = b->dp + b->used;
-070       for (x = b->used; x < oldused; x++) \{
-071         *tmpb++ = 0;
-072       \}
-073     \}
-074     b->sign = a->sign;
-075     return MP_OKAY;
-076   \}
-077   #endif
-\end{alltt}
-\end{small}
-
-This implementation is essentially an optimized implementation of s\_mp\_add for the case of doubling an input.  The only noteworthy difference
-is the use of the logical shift operator on line 51 to perform a single precision doubling.  
-
-\subsection{Division by Two}
-A division by two can just as easily be accomplished with a logical shift right as multiplication by two can be with a logical shift left.
-
-\newpage\begin{figure}[!here]
-\begin{small}
-\begin{center}
-\begin{tabular}{l}
-\hline Algorithm \textbf{mp\_div\_2}. \\
-\textbf{Input}.   One mp\_int $a$ \\
-\textbf{Output}.  $b = a/2$. \\
-\hline \\
-1.  If $b.alloc < a.used$ then grow $b$ to hold $a.used$ digits.  (\textit{mp\_grow}) \\
-2.  If the reallocation failed return(\textit{MP\_MEM}). \\
-3.  $oldused \leftarrow b.used$ \\
-4.  $b.used \leftarrow a.used$ \\
-5.  $r \leftarrow 0$ \\
-6.  for $n$ from $b.used - 1$ to $0$ do \\
-\hspace{3mm}6.1  $rr \leftarrow a_n \mbox{ (mod }2\mbox{)}$\\
-\hspace{3mm}6.2  $b_n \leftarrow (a_n >> 1) + (r << (lg(\beta) - 1)) \mbox{ (mod }\beta\mbox{)}$ \\
-\hspace{3mm}6.3  $r \leftarrow rr$ \\
-7.  If $b.used < oldused - 1$ then do \\
-\hspace{3mm}7.1  for $n$ from $b.used$ to $oldused - 1$ do \\
-\hspace{6mm}7.1.1  $b_n \leftarrow 0$ \\
-8.  $b.sign \leftarrow a.sign$ \\
-9.  Clamp excess digits of $b$.  (\textit{mp\_clamp}) \\
-10.  Return(\textit{MP\_OKAY}).\\
-\hline
-\end{tabular}
-\end{center}
-\end{small}
-\caption{Algorithm mp\_div\_2}
-\end{figure}
-
-\textbf{Algorithm mp\_div\_2.}
-This algorithm will divide an mp\_int by two using logical shifts to the right.  Like mp\_mul\_2 it uses a modified low level addition
-core as the basis of the algorithm.  Unlike mp\_mul\_2 the shift operations work from the leading digit to the trailing digit.  The algorithm
-could be written to work from the trailing digit to the leading digit however, it would have to stop one short of $a.used - 1$ digits to prevent
-reading past the end of the array of digits.
-
-Essentially the loop at step 6 is similar to that of mp\_mul\_2 except the logical shifts go in the opposite direction and the carry is at the 
-least significant bit not the most significant bit.  
-
-\vspace{+3mm}\begin{small}
-\hspace{-5.1mm}{\bf File}: bn\_mp\_div\_2.c
-\vspace{-3mm}
-\begin{alltt}
-016   
-017   /* b = a/2 */
-018   int mp_div_2(mp_int * a, mp_int * b)
-019   \{
-020     int     x, res, oldused;
-021   
-022     /* copy */
-023     if (b->alloc < a->used) \{
-024       if ((res = mp_grow (b, a->used)) != MP_OKAY) \{
-025         return res;
-026       \}
-027     \}
-028   
-029     oldused = b->used;
-030     b->used = a->used;
-031     \{
-032       register mp_digit r, rr, *tmpa, *tmpb;
-033   
-034       /* source alias */
-035       tmpa = a->dp + b->used - 1;
-036   
-037       /* dest alias */
-038       tmpb = b->dp + b->used - 1;
-039   
-040       /* carry */
-041       r = 0;
-042       for (x = b->used - 1; x >= 0; x--) \{
-043         /* get the carry for the next iteration */
-044         rr = *tmpa & 1;
-045   
-046         /* shift the current digit, add in carry and store */
-047         *tmpb-- = (*tmpa-- >> 1) | (r << (DIGIT_BIT - 1));
-048   
-049         /* forward carry to next iteration */
-050         r = rr;
-051       \}
-052   
-053       /* zero excess digits */
-054       tmpb = b->dp + b->used;
-055       for (x = b->used; x < oldused; x++) \{
-056         *tmpb++ = 0;
-057       \}
-058     \}
-059     b->sign = a->sign;
-060     mp_clamp (b);
-061     return MP_OKAY;
-062   \}
-063   #endif
-\end{alltt}
-\end{small}
-
-\section{Polynomial Basis Operations}
-Recall from section 4.3 that any integer can be represented as a polynomial in $x$ as $y = f(\beta)$.  Such a representation is also known as
-the polynomial basis \cite[pp. 48]{ROSE}. Given such a notation a multiplication or division by $x$ amounts to shifting whole digits a single 
-place.  The need for such operations arises in several other higher level algorithms such as Barrett and Montgomery reduction, integer
-division and Karatsuba multiplication.  
-
-Converting from an array of digits to polynomial basis is very simple.  Consider the integer $y \equiv (a_2, a_1, a_0)_{\beta}$ and recall that
-$y = \sum_{i=0}^{2} a_i \beta^i$.  Simply replace $\beta$ with $x$ and the expression is in polynomial basis.  For example, $f(x) = 8x + 9$ is the
-polynomial basis representation for $89$ using radix ten.  That is, $f(10) = 8(10) + 9 = 89$.  
-
-\subsection{Multiplication by $x$}
-
-Given a polynomial in $x$ such as $f(x) = a_n x^n + a_{n-1} x^{n-1} + ... + a_0$ multiplying by $x$ amounts to shifting the coefficients up one 
-degree.  In this case $f(x) \cdot x = a_n x^{n+1} + a_{n-1} x^n + ... + a_0 x$.  From a scalar basis point of view multiplying by $x$ is equivalent to
-multiplying by the integer $\beta$.  
-
-\newpage\begin{figure}[!here]
-\begin{small}
-\begin{center}
-\begin{tabular}{l}
-\hline Algorithm \textbf{mp\_lshd}. \\
-\textbf{Input}.   One mp\_int $a$ and an integer $b$ \\
-\textbf{Output}.  $a \leftarrow a \cdot \beta^b$ (equivalent to multiplication by $x^b$). \\
-\hline \\
-1.  If $b \le 0$ then return(\textit{MP\_OKAY}). \\
-2.  If $a.alloc < a.used + b$ then grow $a$ to at least $a.used + b$ digits.  (\textit{mp\_grow}). \\
-3.  If the reallocation failed return(\textit{MP\_MEM}). \\
-4.  $a.used \leftarrow a.used + b$ \\
-5.  $i \leftarrow a.used - 1$ \\
-6.  $j \leftarrow a.used - 1 - b$ \\
-7.  for $n$ from $a.used - 1$ to $b$ do \\
-\hspace{3mm}7.1  $a_{i} \leftarrow a_{j}$ \\
-\hspace{3mm}7.2  $i \leftarrow i - 1$ \\
-\hspace{3mm}7.3  $j \leftarrow j - 1$ \\
-8.  for $n$ from 0 to $b - 1$ do \\
-\hspace{3mm}8.1  $a_n \leftarrow 0$ \\
-9.  Return(\textit{MP\_OKAY}). \\
-\hline
-\end{tabular}
-\end{center}
-\end{small}
-\caption{Algorithm mp\_lshd}
-\end{figure}
-
-\textbf{Algorithm mp\_lshd.}
-This algorithm multiplies an mp\_int by the $b$'th power of $x$.  This is equivalent to multiplying by $\beta^b$.  The algorithm differs 
-from the other algorithms presented so far as it performs the operation in place instead storing the result in a separate location.  The
-motivation behind this change is due to the way this function is typically used.  Algorithms such as mp\_add store the result in an optionally
-different third mp\_int because the original inputs are often still required.  Algorithm mp\_lshd (\textit{and similarly algorithm mp\_rshd}) is
-typically used on values where the original value is no longer required.  The algorithm will return success immediately if 
-$b \le 0$ since the rest of algorithm is only valid when $b > 0$.  
-
-First the destination $a$ is grown as required to accomodate the result.  The counters $i$ and $j$ are used to form a \textit{sliding window} over
-the digits of $a$ of length $b$.  The head of the sliding window is at $i$ (\textit{the leading digit}) and the tail at $j$ (\textit{the trailing digit}).  
-The loop on step 7 copies the digit from the tail to the head.  In each iteration the window is moved down one digit.   The last loop on 
-step 8 sets the lower $b$ digits to zero.
-
-\newpage
-\begin{center}
-\begin{figure}[here]
-\includegraphics{pics/sliding_window.ps}
-\caption{Sliding Window Movement}
-\label{pic:sliding_window}
-\end{figure}
-\end{center}
-
-\vspace{+3mm}\begin{small}
-\hspace{-5.1mm}{\bf File}: bn\_mp\_lshd.c
-\vspace{-3mm}
-\begin{alltt}
-016   
-017   /* shift left a certain amount of digits */
-018   int mp_lshd (mp_int * a, int b)
-019   \{
-020     int     x, res;
-021   
-022     /* if its less than zero return */
-023     if (b <= 0) \{
-024       return MP_OKAY;
-025     \}
-026   
-027     /* grow to fit the new digits */
-028     if (a->alloc < a->used + b) \{
-029        if ((res = mp_grow (a, a->used + b)) != MP_OKAY) \{
-030          return res;
-031        \}
-032     \}
-033   
-034     \{
-035       register mp_digit *top, *bottom;
-036   
-037       /* increment the used by the shift amount then copy upwards */
-038       a->used += b;
-039   
-040       /* top */
-041       top = a->dp + a->used - 1;
-042   
-043       /* base */
-044       bottom = a->dp + a->used - 1 - b;
-045   
-046       /* much like mp_rshd this is implemented using a sliding window
-047        * except the window goes the otherway around.  Copying from
-048        * the bottom to the top.  see bn_mp_rshd.c for more info.
-049        */
-050       for (x = a->used - 1; x >= b; x--) \{
-051         *top-- = *bottom--;
-052       \}
-053   
-054       /* zero the lower digits */
-055       top = a->dp;
-056       for (x = 0; x < b; x++) \{
-057         *top++ = 0;
-058       \}
-059     \}
-060     return MP_OKAY;
-061   \}
-062   #endif
-\end{alltt}
-\end{small}
-
-The if statement (line 23) ensures that the $b$ variable is greater than zero since we do not interpret negative
-shift counts properly.  The \textbf{used} count is incremented by $b$ before the copy loop begins.  This elminates 
-the need for an additional variable in the for loop.  The variable $top$ (line 41) is an alias
-for the leading digit while $bottom$ (line 44) is an alias for the trailing edge.  The aliases form a 
-window of exactly $b$ digits over the input.  
-
-\subsection{Division by $x$}
-
-Division by powers of $x$ is easily achieved by shifting the digits right and removing any that will end up to the right of the zero'th digit.  
-
-\newpage\begin{figure}[!here]
-\begin{small}
-\begin{center}
-\begin{tabular}{l}
-\hline Algorithm \textbf{mp\_rshd}. \\
-\textbf{Input}.   One mp\_int $a$ and an integer $b$ \\
-\textbf{Output}.  $a \leftarrow a / \beta^b$ (Divide by $x^b$). \\
-\hline \\
-1.  If $b \le 0$ then return. \\
-2.  If $a.used \le b$ then do \\
-\hspace{3mm}2.1  Zero $a$.  (\textit{mp\_zero}). \\
-\hspace{3mm}2.2  Return. \\
-3.  $i \leftarrow 0$ \\
-4.  $j \leftarrow b$ \\
-5.  for $n$ from 0 to $a.used - b - 1$ do \\
-\hspace{3mm}5.1  $a_i \leftarrow a_j$ \\
-\hspace{3mm}5.2  $i \leftarrow i + 1$ \\
-\hspace{3mm}5.3  $j \leftarrow j + 1$ \\
-6.  for $n$ from $a.used - b$ to $a.used - 1$ do \\
-\hspace{3mm}6.1  $a_n \leftarrow 0$ \\
-7.  $a.used \leftarrow a.used - b$ \\
-8.  Return. \\
-\hline
-\end{tabular}
-\end{center}
-\end{small}
-\caption{Algorithm mp\_rshd}
-\end{figure}
-
-\textbf{Algorithm mp\_rshd.}
-This algorithm divides the input in place by the $b$'th power of $x$.  It is analogous to dividing by a $\beta^b$ but much quicker since
-it does not require single precision division.  This algorithm does not actually return an error code as it cannot fail.  
-
-If the input $b$ is less than one the algorithm quickly returns without performing any work.  If the \textbf{used} count is less than or equal
-to the shift count $b$ then it will simply zero the input and return.
-
-After the trivial cases of inputs have been handled the sliding window is setup.  Much like the case of algorithm mp\_lshd a sliding window that
-is $b$ digits wide is used to copy the digits.  Unlike mp\_lshd the window slides in the opposite direction from the trailing to the leading digit.  
-Also the digits are copied from the leading to the trailing edge.
-
-Once the window copy is complete the upper digits must be zeroed and the \textbf{used} count decremented.
-
-\vspace{+3mm}\begin{small}
-\hspace{-5.1mm}{\bf File}: bn\_mp\_rshd.c
-\vspace{-3mm}
-\begin{alltt}
-016   
-017   /* shift right a certain amount of digits */
-018   void mp_rshd (mp_int * a, int b)
-019   \{
-020     int     x;
-021   
-022     /* if b <= 0 then ignore it */
-023     if (b <= 0) \{
-024       return;
-025     \}
-026   
-027     /* if b > used then simply zero it and return */
-028     if (a->used <= b) \{
-029       mp_zero (a);
-030       return;
-031     \}
-032   
-033     \{
-034       register mp_digit *bottom, *top;
-035   
-036       /* shift the digits down */
-037   
-038       /* bottom */
-039       bottom = a->dp;
-040   
-041       /* top [offset into digits] */
-042       top = a->dp + b;
-043   
-044       /* this is implemented as a sliding window where 
-045        * the window is b-digits long and digits from 
-046        * the top of the window are copied to the bottom
-047        *
-048        * e.g.
-049   
-050        b-2 | b-1 | b0 | b1 | b2 | ... | bb |   ---->
-051                    /\symbol{92}                   |      ---->
-052                     \symbol{92}-------------------/      ---->
-053        */
-054       for (x = 0; x < (a->used - b); x++) \{
-055         *bottom++ = *top++;
-056       \}
-057   
-058       /* zero the top digits */
-059       for (; x < a->used; x++) \{
-060         *bottom++ = 0;
-061       \}
-062     \}
-063     
-064     /* remove excess digits */
-065     a->used -= b;
-066   \}
-067   #endif
-\end{alltt}
-\end{small}
-
-The only noteworthy element of this routine is the lack of a return type since it cannot fail.  Like mp\_lshd() we
-form a sliding window except we copy in the other direction.  After the window (line 59) we then zero
-the upper digits of the input to make sure the result is correct.
-
-\section{Powers of Two}
-
-Now that algorithms for moving single bits as well as whole digits exist algorithms for moving the ``in between'' distances are required.  For 
-example, to quickly multiply by $2^k$ for any $k$ without using a full multiplier algorithm would prove useful.  Instead of performing single
-shifts $k$ times to achieve a multiplication by $2^{\pm k}$ a mixture of whole digit shifting and partial digit shifting is employed.  
-
-\subsection{Multiplication by Power of Two}
-
-\newpage\begin{figure}[!here]
-\begin{small}
-\begin{center}
-\begin{tabular}{l}
-\hline Algorithm \textbf{mp\_mul\_2d}. \\
-\textbf{Input}.   One mp\_int $a$ and an integer $b$ \\
-\textbf{Output}.  $c \leftarrow a \cdot 2^b$. \\
-\hline \\
-1.  $c \leftarrow a$.  (\textit{mp\_copy}) \\
-2.  If $c.alloc < c.used + \lfloor b / lg(\beta) \rfloor + 2$ then grow $c$ accordingly. \\
-3.  If the reallocation failed return(\textit{MP\_MEM}). \\
-4.  If $b \ge lg(\beta)$ then \\
-\hspace{3mm}4.1  $c \leftarrow c \cdot \beta^{\lfloor b / lg(\beta) \rfloor}$ (\textit{mp\_lshd}). \\
-\hspace{3mm}4.2  If step 4.1 failed return(\textit{MP\_MEM}). \\
-5.  $d \leftarrow b \mbox{ (mod }lg(\beta)\mbox{)}$ \\
-6.  If $d \ne 0$ then do \\
-\hspace{3mm}6.1  $mask \leftarrow 2^d$ \\
-\hspace{3mm}6.2  $r \leftarrow 0$ \\
-\hspace{3mm}6.3  for $n$ from $0$ to $c.used - 1$ do \\
-\hspace{6mm}6.3.1  $rr \leftarrow c_n >> (lg(\beta) - d) \mbox{ (mod }mask\mbox{)}$ \\
-\hspace{6mm}6.3.2  $c_n \leftarrow (c_n << d) + r \mbox{ (mod }\beta\mbox{)}$ \\
-\hspace{6mm}6.3.3  $r \leftarrow rr$ \\
-\hspace{3mm}6.4  If $r > 0$ then do \\
-\hspace{6mm}6.4.1  $c_{c.used} \leftarrow r$ \\
-\hspace{6mm}6.4.2  $c.used \leftarrow c.used + 1$ \\
-7.  Return(\textit{MP\_OKAY}). \\
-\hline
-\end{tabular}
-\end{center}
-\end{small}
-\caption{Algorithm mp\_mul\_2d}
-\end{figure}
-
-\textbf{Algorithm mp\_mul\_2d.}
-This algorithm multiplies $a$ by $2^b$ and stores the result in $c$.  The algorithm uses algorithm mp\_lshd and a derivative of algorithm mp\_mul\_2 to
-quickly compute the product.
-
-First the algorithm will multiply $a$ by $x^{\lfloor b / lg(\beta) \rfloor}$ which will ensure that the remainder multiplicand is less than 
-$\beta$.  For example, if $b = 37$ and $\beta = 2^{28}$ then this step will multiply by $x$ leaving a multiplication by $2^{37 - 28} = 2^{9}$ 
-left.
-
-After the digits have been shifted appropriately at most $lg(\beta) - 1$ shifts are left to perform.  Step 5 calculates the number of remaining shifts 
-required.  If it is non-zero a modified shift loop is used to calculate the remaining product.  
-Essentially the loop is a generic version of algorith mp\_mul2 designed to handle any shift count in the range $1 \le x < lg(\beta)$.  The $mask$
-variable is used to extract the upper $d$ bits to form the carry for the next iteration.  
-
-This algorithm is loosely measured as a $O(2n)$ algorithm which means that if the input is $n$-digits that it takes $2n$ ``time'' to 
-complete.  It is possible to optimize this algorithm down to a $O(n)$ algorithm at a cost of making the algorithm slightly harder to follow.
-
-\vspace{+3mm}\begin{small}
-\hspace{-5.1mm}{\bf File}: bn\_mp\_mul\_2d.c
-\vspace{-3mm}
-\begin{alltt}
-016   
-017   /* shift left by a certain bit count */
-018   int mp_mul_2d (mp_int * a, int b, mp_int * c)
-019   \{
-020     mp_digit d;
-021     int      res;
-022   
-023     /* copy */
-024     if (a != c) \{
-025        if ((res = mp_copy (a, c)) != MP_OKAY) \{
-026          return res;
-027        \}
-028     \}
-029   
-030     if (c->alloc < (int)(c->used + b/DIGIT_BIT + 1)) \{
-031        if ((res = mp_grow (c, c->used + b / DIGIT_BIT + 1)) != MP_OKAY) \{
-032          return res;
-033        \}
-034     \}
-035   
-036     /* shift by as many digits in the bit count */
-037     if (b >= (int)DIGIT_BIT) \{
-038       if ((res = mp_lshd (c, b / DIGIT_BIT)) != MP_OKAY) \{
-039         return res;
-040       \}
-041     \}
-042   
-043     /* shift any bit count < DIGIT_BIT */
-044     d = (mp_digit) (b % DIGIT_BIT);
-045     if (d != 0) \{
-046       register mp_digit *tmpc, shift, mask, r, rr;
-047       register int x;
-048   
-049       /* bitmask for carries */
-050       mask = (((mp_digit)1) << d) - 1;
-051   
-052       /* shift for msbs */
-053       shift = DIGIT_BIT - d;
-054   
-055       /* alias */
-056       tmpc = c->dp;
-057   
-058       /* carry */
-059       r    = 0;
-060       for (x = 0; x < c->used; x++) \{
-061         /* get the higher bits of the current word */
-062         rr = (*tmpc >> shift) & mask;
-063   
-064         /* shift the current word and OR in the carry */
-065         *tmpc = ((*tmpc << d) | r) & MP_MASK;
-066         ++tmpc;
-067   
-068         /* set the carry to the carry bits of the current word */
-069         r = rr;
-070       \}
-071       
-072       /* set final carry */
-073       if (r != 0) \{
-074          c->dp[(c->used)++] = r;
-075       \}
-076     \}
-077     mp_clamp (c);
-078     return MP_OKAY;
-079   \}
-080   #endif
-\end{alltt}
-\end{small}
-
-The shifting is performed in--place which means the first step (line 24) is to copy the input to the 
-destination.  We avoid calling mp\_copy() by making sure the mp\_ints are different.  The destination then
-has to be grown (line 31) to accomodate the result.
-
-If the shift count $b$ is larger than $lg(\beta)$ then a call to mp\_lshd() is used to handle all of the multiples 
-of $lg(\beta)$.  Leaving only a remaining shift of $lg(\beta) - 1$ or fewer bits left.  Inside the actual shift 
-loop (lines 45 to 76) we make use of pre--computed values $shift$ and $mask$.   These are used to
-extract the carry bit(s) to pass into the next iteration of the loop.  The $r$ and $rr$ variables form a 
-chain between consecutive iterations to propagate the carry.  
-
-\subsection{Division by Power of Two}
-
-\newpage\begin{figure}[!here]
-\begin{small}
-\begin{center}
-\begin{tabular}{l}
-\hline Algorithm \textbf{mp\_div\_2d}. \\
-\textbf{Input}.   One mp\_int $a$ and an integer $b$ \\
-\textbf{Output}.  $c \leftarrow \lfloor a / 2^b \rfloor, d \leftarrow a \mbox{ (mod }2^b\mbox{)}$. \\
-\hline \\
-1.  If $b \le 0$ then do \\
-\hspace{3mm}1.1  $c \leftarrow a$ (\textit{mp\_copy}) \\
-\hspace{3mm}1.2  $d \leftarrow 0$ (\textit{mp\_zero}) \\
-\hspace{3mm}1.3  Return(\textit{MP\_OKAY}). \\
-2.  $c \leftarrow a$ \\
-3.  $d \leftarrow a \mbox{ (mod }2^b\mbox{)}$ (\textit{mp\_mod\_2d}) \\
-4.  If $b \ge lg(\beta)$ then do \\
-\hspace{3mm}4.1  $c \leftarrow \lfloor c/\beta^{\lfloor b/lg(\beta) \rfloor} \rfloor$ (\textit{mp\_rshd}). \\
-5.  $k \leftarrow b \mbox{ (mod }lg(\beta)\mbox{)}$ \\
-6.  If $k \ne 0$ then do \\
-\hspace{3mm}6.1  $mask \leftarrow 2^k$ \\
-\hspace{3mm}6.2  $r \leftarrow 0$ \\
-\hspace{3mm}6.3  for $n$ from $c.used - 1$ to $0$ do \\
-\hspace{6mm}6.3.1  $rr \leftarrow c_n \mbox{ (mod }mask\mbox{)}$ \\
-\hspace{6mm}6.3.2  $c_n \leftarrow (c_n >> k) + (r << (lg(\beta) - k))$ \\
-\hspace{6mm}6.3.3  $r \leftarrow rr$ \\
-7.  Clamp excess digits of $c$.  (\textit{mp\_clamp}) \\
-8.  Return(\textit{MP\_OKAY}). \\
-\hline
-\end{tabular}
-\end{center}
-\end{small}
-\caption{Algorithm mp\_div\_2d}
-\end{figure}
-
-\textbf{Algorithm mp\_div\_2d.}
-This algorithm will divide an input $a$ by $2^b$ and produce the quotient and remainder.  The algorithm is designed much like algorithm 
-mp\_mul\_2d by first using whole digit shifts then single precision shifts.  This algorithm will also produce the remainder of the division
-by using algorithm mp\_mod\_2d.
-
-\vspace{+3mm}\begin{small}
-\hspace{-5.1mm}{\bf File}: bn\_mp\_div\_2d.c
-\vspace{-3mm}
-\begin{alltt}
-016   
-017   /* shift right by a certain bit count (store quotient in c, optional remaind
-      er in d) */
-018   int mp_div_2d (mp_int * a, int b, mp_int * c, mp_int * d)
-019   \{
-020     mp_digit D, r, rr;
-021     int     x, res;
-022     mp_int  t;
-023   
-024   
-025     /* if the shift count is <= 0 then we do no work */
-026     if (b <= 0) \{
-027       res = mp_copy (a, c);
-028       if (d != NULL) \{
-029         mp_zero (d);
-030       \}
-031       return res;
-032     \}
-033   
-034     if ((res = mp_init (&t)) != MP_OKAY) \{
-035       return res;
-036     \}
-037   
-038     /* get the remainder */
-039     if (d != NULL) \{
-040       if ((res = mp_mod_2d (a, b, &t)) != MP_OKAY) \{
-041         mp_clear (&t);
-042         return res;
-043       \}
-044     \}
-045   
-046     /* copy */
-047     if ((res = mp_copy (a, c)) != MP_OKAY) \{
-048       mp_clear (&t);
-049       return res;
-050     \}
-051   
-052     /* shift by as many digits in the bit count */
-053     if (b >= (int)DIGIT_BIT) \{
-054       mp_rshd (c, b / DIGIT_BIT);
-055     \}
-056   
-057     /* shift any bit count < DIGIT_BIT */
-058     D = (mp_digit) (b % DIGIT_BIT);
-059     if (D != 0) \{
-060       register mp_digit *tmpc, mask, shift;
-061   
-062       /* mask */
-063       mask = (((mp_digit)1) << D) - 1;
-064   
-065       /* shift for lsb */
-066       shift = DIGIT_BIT - D;
-067   
-068       /* alias */
-069       tmpc = c->dp + (c->used - 1);
-070   
-071       /* carry */
-072       r = 0;
-073       for (x = c->used - 1; x >= 0; x--) \{
-074         /* get the lower  bits of this word in a temp */
-075         rr = *tmpc & mask;
-076   
-077         /* shift the current word and mix in the carry bits from the previous 
-      word */
-078         *tmpc = (*tmpc >> D) | (r << shift);
-079         --tmpc;
-080   
-081         /* set the carry to the carry bits of the current word found above */
-082         r = rr;
-083       \}
-084     \}
-085     mp_clamp (c);
-086     if (d != NULL) \{
-087       mp_exch (&t, d);
-088     \}
-089     mp_clear (&t);
-090     return MP_OKAY;
-091   \}
-092   #endif
-\end{alltt}
-\end{small}
-
-The implementation of algorithm mp\_div\_2d is slightly different than the algorithm specifies.  The remainder $d$ may be optionally 
-ignored by passing \textbf{NULL} as the pointer to the mp\_int variable.    The temporary mp\_int variable $t$ is used to hold the 
-result of the remainder operation until the end.  This allows $d$ and $a$ to represent the same mp\_int without modifying $a$ before
-the quotient is obtained.
-
-The remainder of the source code is essentially the same as the source code for mp\_mul\_2d.  The only significant difference is
-the direction of the shifts.
-
-\subsection{Remainder of Division by Power of Two}
-
-The last algorithm in the series of polynomial basis power of two algorithms is calculating the remainder of division by $2^b$.  This
-algorithm benefits from the fact that in twos complement arithmetic $a \mbox{ (mod }2^b\mbox{)}$ is the same as $a$ AND $2^b - 1$.  
-
-\begin{figure}[!here]
-\begin{small}
-\begin{center}
-\begin{tabular}{l}
-\hline Algorithm \textbf{mp\_mod\_2d}. \\
-\textbf{Input}.   One mp\_int $a$ and an integer $b$ \\
-\textbf{Output}.  $c \leftarrow a \mbox{ (mod }2^b\mbox{)}$. \\
-\hline \\
-1.  If $b \le 0$ then do \\
-\hspace{3mm}1.1  $c \leftarrow 0$ (\textit{mp\_zero}) \\
-\hspace{3mm}1.2  Return(\textit{MP\_OKAY}). \\
-2.  If $b > a.used \cdot lg(\beta)$ then do \\
-\hspace{3mm}2.1  $c \leftarrow a$ (\textit{mp\_copy}) \\
-\hspace{3mm}2.2  Return the result of step 2.1. \\
-3.  $c \leftarrow a$ \\
-4.  If step 3 failed return(\textit{MP\_MEM}). \\
-5.  for $n$ from $\lceil b / lg(\beta) \rceil$ to $c.used$ do \\
-\hspace{3mm}5.1  $c_n \leftarrow 0$ \\
-6.  $k \leftarrow b \mbox{ (mod }lg(\beta)\mbox{)}$ \\
-7.  $c_{\lfloor b / lg(\beta) \rfloor} \leftarrow c_{\lfloor b / lg(\beta) \rfloor} \mbox{ (mod }2^{k}\mbox{)}$. \\
-8.  Clamp excess digits of $c$.  (\textit{mp\_clamp}) \\
-9.  Return(\textit{MP\_OKAY}). \\
-\hline
-\end{tabular}
-\end{center}
-\end{small}
-\caption{Algorithm mp\_mod\_2d}
-\end{figure}
-
-\textbf{Algorithm mp\_mod\_2d.}
-This algorithm will quickly calculate the value of $a \mbox{ (mod }2^b\mbox{)}$.  First if $b$ is less than or equal to zero the 
-result is set to zero.  If $b$ is greater than the number of bits in $a$ then it simply copies $a$ to $c$ and returns.  Otherwise, $a$ 
-is copied to $b$, leading digits are removed and the remaining leading digit is trimed to the exact bit count.
-
-\vspace{+3mm}\begin{small}
-\hspace{-5.1mm}{\bf File}: bn\_mp\_mod\_2d.c
-\vspace{-3mm}
-\begin{alltt}
-016   
-017   /* calc a value mod 2**b */
-018   int
-019   mp_mod_2d (mp_int * a, int b, mp_int * c)
-020   \{
-021     int     x, res;
-022   
-023     /* if b is <= 0 then zero the int */
-024     if (b <= 0) \{
-025       mp_zero (c);
-026       return MP_OKAY;
-027     \}
-028   
-029     /* if the modulus is larger than the value than return */
-030     if (b >= (int) (a->used * DIGIT_BIT)) \{
-031       res = mp_copy (a, c);
-032       return res;
-033     \}
-034   
-035     /* copy */
-036     if ((res = mp_copy (a, c)) != MP_OKAY) \{
-037       return res;
-038     \}
-039   
-040     /* zero digits above the last digit of the modulus */
-041     for (x = (b / DIGIT_BIT) + ((b % DIGIT_BIT) == 0 ? 0 : 1); x < c->used; x+
-      +) \{
-042       c->dp[x] = 0;
-043     \}
-044     /* clear the digit that is not completely outside/inside the modulus */
-045     c->dp[b / DIGIT_BIT] &=
-046       (mp_digit) ((((mp_digit) 1) << (((mp_digit) b) % DIGIT_BIT)) - ((mp_digi
-      t) 1));
-047     mp_clamp (c);
-048     return MP_OKAY;
-049   \}
-050   #endif
-\end{alltt}
-\end{small}
-
-We first avoid cases of $b \le 0$ by simply mp\_zero()'ing the destination in such cases.  Next if $2^b$ is larger
-than the input we just mp\_copy() the input and return right away.  After this point we know we must actually
-perform some work to produce the remainder.
-
-Recalling that reducing modulo $2^k$ and a binary ``and'' with $2^k - 1$ are numerically equivalent we can quickly reduce 
-the number.  First we zero any digits above the last digit in $2^b$ (line 41).  Next we reduce the 
-leading digit of both (line 45) and then mp\_clamp().
-
-\section*{Exercises}
-\begin{tabular}{cl}
-$\left [ 3 \right ] $ & Devise an algorithm that performs $a \cdot 2^b$ for generic values of $b$ \\
-                      & in $O(n)$ time. \\
-                      &\\
-$\left [ 3 \right ] $ & Devise an efficient algorithm to multiply by small low hamming  \\
-                      & weight values such as $3$, $5$ and $9$.  Extend it to handle all values \\
-                      & upto $64$ with a hamming weight less than three. \\
-                      &\\
-$\left [ 2 \right ] $ & Modify the preceding algorithm to handle values of the form \\
-                      & $2^k - 1$ as well. \\
-                      &\\
-$\left [ 3 \right ] $ & Using only algorithms mp\_mul\_2, mp\_div\_2 and mp\_add create an \\
-                      & algorithm to multiply two integers in roughly $O(2n^2)$ time for \\
-                      & any $n$-bit input.  Note that the time of addition is ignored in the \\
-                      & calculation.  \\
-                      & \\
-$\left [ 5 \right ] $ & Improve the previous algorithm to have a working time of at most \\
-                      & $O \left (2^{(k-1)}n + \left ({2n^2 \over k} \right ) \right )$ for an appropriate choice of $k$.  Again ignore \\
-                      & the cost of addition. \\
-                      & \\
-$\left [ 2 \right ] $ & Devise a chart to find optimal values of $k$ for the previous problem \\
-                      & for $n = 64 \ldots 1024$ in steps of $64$. \\
-                      & \\
-$\left [ 2 \right ] $ & Using only algorithms mp\_abs and mp\_sub devise another method for \\
-                      & calculating the result of a signed comparison. \\
-                      &
-\end{tabular}
-
-\chapter{Multiplication and Squaring}
-\section{The Multipliers}
-For most number theoretic problems including certain public key cryptographic algorithms, the ``multipliers'' form the most important subset of 
-algorithms of any multiple precision integer package.  The set of multiplier algorithms include integer multiplication, squaring and modular reduction 
-where in each of the algorithms single precision multiplication is the dominant operation performed.  This chapter will discuss integer multiplication 
-and squaring, leaving modular reductions for the subsequent chapter.  
-
-The importance of the multiplier algorithms is for the most part driven by the fact that certain popular public key algorithms are based on modular 
-exponentiation, that is computing $d \equiv a^b \mbox{ (mod }c\mbox{)}$ for some arbitrary choice of $a$, $b$, $c$ and $d$.  During a modular
-exponentiation the majority\footnote{Roughly speaking a modular exponentiation will spend about 40\% of the time performing modular reductions, 
-35\% of the time performing squaring and 25\% of the time performing multiplications.} of the processor time is spent performing single precision 
-multiplications.
-
-For centuries general purpose multiplication has required a lengthly $O(n^2)$ process, whereby each digit of one multiplicand has to be multiplied 
-against every digit of the other multiplicand.  Traditional long-hand multiplication is based on this process;  while the techniques can differ the 
-overall algorithm used is essentially the same.  Only ``recently'' have faster algorithms been studied.  First Karatsuba multiplication was discovered in 
-1962.  This algorithm can multiply two numbers with considerably fewer single precision multiplications when compared to the long-hand approach.  
-This technique led to the discovery of polynomial basis algorithms (\textit{good reference?}) and subquently Fourier Transform based solutions.  
-
-\section{Multiplication}
-\subsection{The Baseline Multiplication}
-\label{sec:basemult}
-\index{baseline multiplication}
-Computing the product of two integers in software can be achieved using a trivial adaptation of the standard $O(n^2)$ long-hand multiplication
-algorithm that school children are taught.  The algorithm is considered an $O(n^2)$ algorithm since for two $n$-digit inputs $n^2$ single precision 
-multiplications are required.  More specifically for a $m$ and $n$ digit input $m \cdot n$ single precision multiplications are required.  To 
-simplify most discussions, it will be assumed that the inputs have comparable number of digits.  
-
-The ``baseline multiplication'' algorithm is designed to act as the ``catch-all'' algorithm, only to be used when the faster algorithms cannot be 
-used.  This algorithm does not use any particularly interesting optimizations and should ideally be avoided if possible.    One important 
-facet of this algorithm, is that it has been modified to only produce a certain amount of output digits as resolution.  The importance of this 
-modification will become evident during the discussion of Barrett modular reduction.  Recall that for a $n$ and $m$ digit input the product 
-will be at most $n + m$ digits.  Therefore, this algorithm can be reduced to a full multiplier by having it produce $n + m$ digits of the product.  
-
-Recall from sub-section 4.2.2 the definition of $\gamma$ as the number of bits in the type \textbf{mp\_digit}.  We shall now extend the variable set to 
-include $\alpha$ which shall represent the number of bits in the type \textbf{mp\_word}.  This implies that $2^{\alpha} > 2 \cdot \beta^2$.  The 
-constant $\delta = 2^{\alpha - 2lg(\beta)}$ will represent the maximal weight of any column in a product (\textit{see sub-section 5.2.2 for more information}).
-
-\newpage\begin{figure}[!here]
-\begin{small}
-\begin{center}
-\begin{tabular}{l}
-\hline Algorithm \textbf{s\_mp\_mul\_digs}. \\
-\textbf{Input}.   mp\_int $a$, mp\_int $b$ and an integer $digs$ \\
-\textbf{Output}.  $c \leftarrow \vert a \vert \cdot \vert b \vert \mbox{ (mod }\beta^{digs}\mbox{)}$. \\
-\hline \\
-1.  If min$(a.used, b.used) < \delta$ then do \\
-\hspace{3mm}1.1  Calculate $c = \vert a \vert \cdot \vert b \vert$ by the Comba method (\textit{see algorithm~\ref{fig:COMBAMULT}}).  \\
-\hspace{3mm}1.2  Return the result of step 1.1 \\
-\\
-Allocate and initialize a temporary mp\_int. \\
-2.  Init $t$ to be of size $digs$ \\
-3.  If step 2 failed return(\textit{MP\_MEM}). \\
-4.  $t.used \leftarrow digs$ \\
-\\
-Compute the product. \\
-5.  for $ix$ from $0$ to $a.used - 1$ do \\
-\hspace{3mm}5.1  $u \leftarrow 0$ \\
-\hspace{3mm}5.2  $pb \leftarrow \mbox{min}(b.used, digs - ix)$ \\
-\hspace{3mm}5.3  If $pb < 1$ then goto step 6. \\
-\hspace{3mm}5.4  for $iy$ from $0$ to $pb - 1$ do \\
-\hspace{6mm}5.4.1  $\hat r \leftarrow t_{iy + ix} + a_{ix} \cdot b_{iy} + u$ \\
-\hspace{6mm}5.4.2  $t_{iy + ix} \leftarrow \hat r \mbox{ (mod }\beta\mbox{)}$ \\
-\hspace{6mm}5.4.3  $u \leftarrow \lfloor \hat r / \beta \rfloor$ \\
-\hspace{3mm}5.5  if $ix + pb < digs$ then do \\
-\hspace{6mm}5.5.1  $t_{ix + pb} \leftarrow u$ \\
-6.  Clamp excess digits of $t$. \\
-7.  Swap $c$ with $t$ \\
-8.  Clear $t$ \\
-9.  Return(\textit{MP\_OKAY}). \\
-\hline
-\end{tabular}
-\end{center}
-\end{small}
-\caption{Algorithm s\_mp\_mul\_digs}
-\end{figure}
-
-\textbf{Algorithm s\_mp\_mul\_digs.}
-This algorithm computes the unsigned product of two inputs $a$ and $b$, limited to an output precision of $digs$ digits.  While it may seem
-a bit awkward to modify the function from its simple $O(n^2)$ description, the usefulness of partial multipliers will arise in a subsequent 
-algorithm.  The algorithm is loosely based on algorithm 14.12 from \cite[pp. 595]{HAC} and is similar to Algorithm M of Knuth \cite[pp. 268]{TAOCPV2}.  
-Algorithm s\_mp\_mul\_digs differs from these cited references since it can produce a variable output precision regardless of the precision of the 
-inputs.
-
-The first thing this algorithm checks for is whether a Comba multiplier can be used instead.   If the minimum digit count of either
-input is less than $\delta$, then the Comba method may be used instead.    After the Comba method is ruled out, the baseline algorithm begins.  A 
-temporary mp\_int variable $t$ is used to hold the intermediate result of the product.  This allows the algorithm to be used to 
-compute products when either $a = c$ or $b = c$ without overwriting the inputs.  
-
-All of step 5 is the infamous $O(n^2)$ multiplication loop slightly modified to only produce upto $digs$ digits of output.  The $pb$ variable
-is given the count of digits to read from $b$ inside the nested loop.  If $pb \le 1$ then no more output digits can be produced and the algorithm
-will exit the loop.  The best way to think of the loops are as a series of $pb \times 1$ multiplications.    That is, in each pass of the 
-innermost loop $a_{ix}$ is multiplied against $b$ and the result is added (\textit{with an appropriate shift}) to $t$.  
-
-For example, consider multiplying $576$ by $241$.  That is equivalent to computing $10^0(1)(576) + 10^1(4)(576) + 10^2(2)(576)$ which is best
-visualized in the following table.
-
-\begin{figure}[here]
-\begin{center}
-\begin{tabular}{|c|c|c|c|c|c|l|}
-\hline   &&          & 5 & 7 & 6 & \\
-\hline   $\times$&&  & 2 & 4 & 1 & \\
-\hline &&&&&&\\
-  &&          & 5 & 7 & 6 & $10^0(1)(576)$ \\
-  &2 &   3    & 6 & 1 & 6 & $10^1(4)(576) + 10^0(1)(576)$ \\
-  1 & 3 & 8 & 8 & 1 & 6 &   $10^2(2)(576) + 10^1(4)(576) + 10^0(1)(576)$ \\
-\hline  
-\end{tabular}
-\end{center}
-\caption{Long-Hand Multiplication Diagram}
-\end{figure}
-
-Each row of the product is added to the result after being shifted to the left (\textit{multiplied by a power of the radix}) by the appropriate 
-count.  That is in pass $ix$ of the inner loop the product is added starting at the $ix$'th digit of the reult.
-
-Step 5.4.1 introduces the hat symbol (\textit{e.g. $\hat r$}) which represents a double precision variable.  The multiplication on that step
-is assumed to be a double wide output single precision multiplication.  That is, two single precision variables are multiplied to produce a
-double precision result.  The step is somewhat optimized from a long-hand multiplication algorithm because the carry from the addition in step
-5.4.1 is propagated through the nested loop.  If the carry was not propagated immediately it would overflow the single precision digit 
-$t_{ix+iy}$ and the result would be lost.  
-
-At step 5.5 the nested loop is finished and any carry that was left over should be forwarded.  The carry does not have to be added to the $ix+pb$'th
-digit since that digit is assumed to be zero at this point.  However, if $ix + pb \ge digs$ the carry is not set as it would make the result
-exceed the precision requested.
-
-\vspace{+3mm}\begin{small}
-\hspace{-5.1mm}{\bf File}: bn\_s\_mp\_mul\_digs.c
-\vspace{-3mm}
-\begin{alltt}
-016   
-017   /* multiplies |a| * |b| and only computes upto digs digits of result
-018    * HAC pp. 595, Algorithm 14.12  Modified so you can control how 
-019    * many digits of output are created.
-020    */
-021   int s_mp_mul_digs (mp_int * a, mp_int * b, mp_int * c, int digs)
-022   \{
-023     mp_int  t;
-024     int     res, pa, pb, ix, iy;
-025     mp_digit u;
-026     mp_word r;
-027     mp_digit tmpx, *tmpt, *tmpy;
-028   
-029     /* can we use the fast multiplier? */
-030     if (((digs) < MP_WARRAY) &&
-031         MIN (a->used, b->used) < 
-032             (1 << ((CHAR_BIT * sizeof (mp_word)) - (2 * DIGIT_BIT)))) \{
-033       return fast_s_mp_mul_digs (a, b, c, digs);
-034     \}
-035   
-036     if ((res = mp_init_size (&t, digs)) != MP_OKAY) \{
-037       return res;
-038     \}
-039     t.used = digs;
-040   
-041     /* compute the digits of the product directly */
-042     pa = a->used;
-043     for (ix = 0; ix < pa; ix++) \{
-044       /* set the carry to zero */
-045       u = 0;
-046   
-047       /* limit ourselves to making digs digits of output */
-048       pb = MIN (b->used, digs - ix);
-049   
-050       /* setup some aliases */
-051       /* copy of the digit from a used within the nested loop */
-052       tmpx = a->dp[ix];
-053       
-054       /* an alias for the destination shifted ix places */
-055       tmpt = t.dp + ix;
-056       
-057       /* an alias for the digits of b */
-058       tmpy = b->dp;
-059   
-060       /* compute the columns of the output and propagate the carry */
-061       for (iy = 0; iy < pb; iy++) \{
-062         /* compute the column as a mp_word */
-063         r       = ((mp_word)*tmpt) +
-064                   ((mp_word)tmpx) * ((mp_word)*tmpy++) +
-065                   ((mp_word) u);
-066   
-067         /* the new column is the lower part of the result */
-068         *tmpt++ = (mp_digit) (r & ((mp_word) MP_MASK));
-069   
-070         /* get the carry word from the result */
-071         u       = (mp_digit) (r >> ((mp_word) DIGIT_BIT));
-072       \}
-073       /* set carry if it is placed below digs */
-074       if (ix + iy < digs) \{
-075         *tmpt = u;
-076       \}
-077     \}
-078   
-079     mp_clamp (&t);
-080     mp_exch (&t, c);
-081   
-082     mp_clear (&t);
-083     return MP_OKAY;
-084   \}
-085   #endif
-\end{alltt}
-\end{small}
-
-First we determine (line 30) if the Comba method can be used first since it's faster.  The conditions for 
-sing the Comba routine are that min$(a.used, b.used) < \delta$ and the number of digits of output is less than 
-\textbf{MP\_WARRAY}.  This new constant is used to control the stack usage in the Comba routines.  By default it is 
-set to $\delta$ but can be reduced when memory is at a premium.
-
-If we cannot use the Comba method we proceed to setup the baseline routine.  We allocate the the destination mp\_int
-$t$ (line 36) to the exact size of the output to avoid further re--allocations.  At this point we now 
-begin the $O(n^2)$ loop.
-
-This implementation of multiplication has the caveat that it can be trimmed to only produce a variable number of
-digits as output.  In each iteration of the outer loop the $pb$ variable is set (line 48) to the maximum 
-number of inner loop iterations.  
-
-Inside the inner loop we calculate $\hat r$ as the mp\_word product of the two mp\_digits and the addition of the
-carry from the previous iteration.  A particularly important observation is that most modern optimizing 
-C compilers (GCC for instance) can recognize that a $N \times N \rightarrow 2N$ multiplication is all that 
-is required for the product.  In x86 terms for example, this means using the MUL instruction.
-
-Each digit of the product is stored in turn (line 68) and the carry propagated (line 71) to the 
-next iteration.
-
-\subsection{Faster Multiplication by the ``Comba'' Method}
-
-One of the huge drawbacks of the ``baseline'' algorithms is that at the $O(n^2)$ level the carry must be 
-computed and propagated upwards.  This makes the nested loop very sequential and hard to unroll and implement 
-in parallel.  The ``Comba'' \cite{COMBA} method is named after little known (\textit{in cryptographic venues}) Paul G. 
-Comba who described a method of implementing fast multipliers that do not require nested carry fixup operations.  As an 
-interesting aside it seems that Paul Barrett describes a similar technique in his 1986 paper \cite{BARRETT} written 
-five years before.
-
-At the heart of the Comba technique is once again the long-hand algorithm.  Except in this case a slight 
-twist is placed on how the columns of the result are produced.  In the standard long-hand algorithm rows of products 
-are produced then added together to form the final result.  In the baseline algorithm the columns are added together 
-after each iteration to get the result instantaneously.  
-
-In the Comba algorithm the columns of the result are produced entirely independently of each other.  That is at 
-the $O(n^2)$ level a simple multiplication and addition step is performed.  The carries of the columns are propagated 
-after the nested loop to reduce the amount of work requiored. Succintly the first step of the algorithm is to compute 
-the product vector $\vec x$ as follows. 
-
-\begin{equation}
-\vec x_n = \sum_{i+j = n} a_ib_j, \forall n \in \lbrace 0, 1, 2, \ldots, i + j \rbrace
-\end{equation}
-
-Where $\vec x_n$ is the $n'th$ column of the output vector.  Consider the following example which computes the vector $\vec x$ for the multiplication
-of $576$ and $241$.  
-
-\newpage\begin{figure}[here]
-\begin{small}
-\begin{center}
-\begin{tabular}{|c|c|c|c|c|c|}
-  \hline &          & 5 & 7 & 6 & First Input\\
-  \hline $\times$ & & 2 & 4 & 1 & Second Input\\
-\hline            &                        & $1 \cdot 5 = 5$   & $1 \cdot 7 = 7$   & $1 \cdot 6 = 6$ & First pass \\
-                  &  $4 \cdot 5 = 20$      & $4 \cdot 7+5=33$  & $4 \cdot 6+7=31$  & 6               & Second pass \\
-   $2 \cdot 5 = 10$ &  $2 \cdot 7 + 20 = 34$ & $2 \cdot 6+33=45$ & 31                & 6             & Third pass \\
-\hline 10 & 34 & 45 & 31 & 6 & Final Result \\   
-\hline   
-\end{tabular}
-\end{center}
-\end{small}
-\caption{Comba Multiplication Diagram}
-\end{figure}
-
-At this point the vector $x = \left < 10, 34, 45, 31, 6 \right >$ is the result of the first step of the Comba multipler.  
-Now the columns must be fixed by propagating the carry upwards.  The resultant vector will have one extra dimension over the input vector which is
-congruent to adding a leading zero digit.
-
-\begin{figure}[!here]
-\begin{small}
-\begin{center}
-\begin{tabular}{l}
-\hline Algorithm \textbf{Comba Fixup}. \\
-\textbf{Input}.   Vector $\vec x$ of dimension $k$ \\
-\textbf{Output}.  Vector $\vec x$ such that the carries have been propagated. \\
-\hline \\
-1.  for $n$ from $0$ to $k - 1$ do \\
-\hspace{3mm}1.1 $\vec x_{n+1} \leftarrow \vec x_{n+1} + \lfloor \vec x_{n}/\beta \rfloor$ \\
-\hspace{3mm}1.2 $\vec x_{n} \leftarrow \vec x_{n} \mbox{ (mod }\beta\mbox{)}$ \\
-2.  Return($\vec x$). \\
-\hline
-\end{tabular}
-\end{center}
-\end{small}
-\caption{Algorithm Comba Fixup}
-\end{figure}
-
-With that algorithm and $k = 5$ and $\beta = 10$ the following vector is produced $\vec x= \left < 1, 3, 8, 8, 1, 6 \right >$.  In this case 
-$241 \cdot 576$ is in fact $138816$ and the procedure succeeded.  If the algorithm is correct and as will be demonstrated shortly more
-efficient than the baseline algorithm why not simply always use this algorithm?
-
-\subsubsection{Column Weight.}
-At the nested $O(n^2)$ level the Comba method adds the product of two single precision variables to each column of the output 
-independently.  A serious obstacle is if the carry is lost, due to lack of precision before the algorithm has a chance to fix
-the carries.  For example, in the multiplication of two three-digit numbers the third column of output will be the sum of
-three single precision multiplications.  If the precision of the accumulator for the output digits is less then $3 \cdot (\beta - 1)^2$ then
-an overflow can occur and the carry information will be lost.  For any $m$ and $n$ digit inputs the maximum weight of any column is 
-min$(m, n)$ which is fairly obvious.
-
-The maximum number of terms in any column of a product is known as the ``column weight'' and strictly governs when the algorithm can be used.  Recall
-from earlier that a double precision type has $\alpha$ bits of resolution and a single precision digit has $lg(\beta)$ bits of precision.  Given these
-two quantities we must not violate the following
-
-\begin{equation}
-k \cdot \left (\beta - 1 \right )^2 < 2^{\alpha}
-\end{equation}
-
-Which reduces to 
-
-\begin{equation}
-k \cdot \left ( \beta^2 - 2\beta + 1 \right ) < 2^{\alpha}
-\end{equation}
-
-Let $\rho = lg(\beta)$ represent the number of bits in a single precision digit.  By further re-arrangement of the equation the final solution is
-found.
-
-\begin{equation}
-k  < {{2^{\alpha}} \over {\left (2^{2\rho} - 2^{\rho + 1} + 1 \right )}}
-\end{equation}
-
-The defaults for LibTomMath are $\beta = 2^{28}$ and $\alpha = 2^{64}$ which means that $k$ is bounded by $k < 257$.  In this configuration 
-the smaller input may not have more than $256$ digits if the Comba method is to be used.  This is quite satisfactory for most applications since 
-$256$ digits would allow for numbers in the range of $0 \le x < 2^{7168}$ which, is much larger than most public key cryptographic algorithms require.  
-
-\newpage\begin{figure}[!here]
-\begin{small}
-\begin{center}
-\begin{tabular}{l}
-\hline Algorithm \textbf{fast\_s\_mp\_mul\_digs}. \\
-\textbf{Input}.   mp\_int $a$, mp\_int $b$ and an integer $digs$ \\
-\textbf{Output}.  $c \leftarrow \vert a \vert \cdot \vert b \vert \mbox{ (mod }\beta^{digs}\mbox{)}$. \\
-\hline \\
-Place an array of \textbf{MP\_WARRAY} single precision digits named $W$ on the stack. \\
-1.  If $c.alloc < digs$ then grow $c$ to $digs$ digits. (\textit{mp\_grow}) \\
-2.  If step 1 failed return(\textit{MP\_MEM}).\\
-\\
-3.  $pa \leftarrow \mbox{MIN}(digs, a.used + b.used)$ \\
-\\
-4.  $\_ \hat W \leftarrow 0$ \\
-5.  for $ix$ from 0 to $pa - 1$ do \\
-\hspace{3mm}5.1  $ty \leftarrow \mbox{MIN}(b.used - 1, ix)$ \\
-\hspace{3mm}5.2  $tx \leftarrow ix - ty$ \\
-\hspace{3mm}5.3  $iy \leftarrow \mbox{MIN}(a.used - tx, ty + 1)$ \\
-\hspace{3mm}5.4  for $iz$ from 0 to $iy - 1$ do \\
-\hspace{6mm}5.4.1  $\_ \hat W \leftarrow \_ \hat W + a_{tx+iy}b_{ty-iy}$ \\
-\hspace{3mm}5.5  $W_{ix} \leftarrow \_ \hat W (\mbox{mod }\beta)$\\
-\hspace{3mm}5.6  $\_ \hat W \leftarrow \lfloor \_ \hat W / \beta \rfloor$ \\
-6.  $W_{pa} \leftarrow \_ \hat W (\mbox{mod }\beta)$ \\
-\\
-7.  $oldused \leftarrow c.used$ \\
-8.  $c.used \leftarrow digs$ \\
-9.  for $ix$ from $0$ to $pa$ do \\
-\hspace{3mm}9.1  $c_{ix} \leftarrow W_{ix}$ \\
-10.  for $ix$ from $pa + 1$ to $oldused - 1$ do \\
-\hspace{3mm}10.1 $c_{ix} \leftarrow 0$ \\
-\\
-11.  Clamp $c$. \\
-12.  Return MP\_OKAY. \\
-\hline
-\end{tabular}
-\end{center}
-\end{small}
-\caption{Algorithm fast\_s\_mp\_mul\_digs}
-\label{fig:COMBAMULT}
-\end{figure}
-
-\textbf{Algorithm fast\_s\_mp\_mul\_digs.}
-This algorithm performs the unsigned multiplication of $a$ and $b$ using the Comba method limited to $digs$ digits of precision.
-
-The outer loop of this algorithm is more complicated than that of the baseline multiplier.  This is because on the inside of the 
-loop we want to produce one column per pass.  This allows the accumulator $\_ \hat W$ to be placed in CPU registers and
-reduce the memory bandwidth to two \textbf{mp\_digit} reads per iteration.
-
-The $ty$ variable is set to the minimum count of $ix$ or the number of digits in $b$.  That way if $a$ has more digits than
-$b$ this will be limited to $b.used - 1$.  The $tx$ variable is set to the to the distance past $b.used$ the variable
-$ix$ is.  This is used for the immediately subsequent statement where we find $iy$.  
-
-The variable $iy$ is the minimum digits we can read from either $a$ or $b$ before running out.  Computing one column at a time
-means we have to scan one integer upwards and the other downwards.  $a$ starts at $tx$ and $b$ starts at $ty$.  In each
-pass we are producing the $ix$'th output column and we note that $tx + ty = ix$.  As we move $tx$ upwards we have to 
-move $ty$ downards so the equality remains valid.  The $iy$ variable is the number of iterations until 
-$tx \ge a.used$ or $ty < 0$ occurs.
-
-After every inner pass we store the lower half of the accumulator into $W_{ix}$ and then propagate the carry of the accumulator
-into the next round by dividing $\_ \hat W$ by $\beta$.
-
-To measure the benefits of the Comba method over the baseline method consider the number of operations that are required.  If the 
-cost in terms of time of a multiply and addition is $p$ and the cost of a carry propagation is $q$ then a baseline multiplication would require 
-$O \left ((p + q)n^2 \right )$ time to multiply two $n$-digit numbers.  The Comba method requires only $O(pn^2 + qn)$ time, however in practice, 
-the speed increase is actually much more.  With $O(n)$ space the algorithm can be reduced to $O(pn + qn)$ time by implementing the $n$ multiply
-and addition operations in the nested loop in parallel.  
-
-\vspace{+3mm}\begin{small}
-\hspace{-5.1mm}{\bf File}: bn\_fast\_s\_mp\_mul\_digs.c
-\vspace{-3mm}
-\begin{alltt}
-016   
-017   /* Fast (comba) multiplier
-018    *
-019    * This is the fast column-array [comba] multiplier.  It is 
-020    * designed to compute the columns of the product first 
-021    * then handle the carries afterwards.  This has the effect 
-022    * of making the nested loops that compute the columns very
-023    * simple and schedulable on super-scalar processors.
-024    *
-025    * This has been modified to produce a variable number of 
-026    * digits of output so if say only a half-product is required 
-027    * you don't have to compute the upper half (a feature 
-028    * required for fast Barrett reduction).
-029    *
-030    * Based on Algorithm 14.12 on pp.595 of HAC.
-031    *
-032    */
-033   int fast_s_mp_mul_digs (mp_int * a, mp_int * b, mp_int * c, int digs)
-034   \{
-035     int     olduse, res, pa, ix, iz;
-036     mp_digit W[MP_WARRAY];
-037     register mp_word  _W;
-038   
-039     /* grow the destination as required */
-040     if (c->alloc < digs) \{
-041       if ((res = mp_grow (c, digs)) != MP_OKAY) \{
-042         return res;
-043       \}
-044     \}
-045   
-046     /* number of output digits to produce */
-047     pa = MIN(digs, a->used + b->used);
-048   
-049     /* clear the carry */
-050     _W = 0;
-051     for (ix = 0; ix < pa; ix++) \{ 
-052         int      tx, ty;
-053         int      iy;
-054         mp_digit *tmpx, *tmpy;
-055   
-056         /* get offsets into the two bignums */
-057         ty = MIN(b->used-1, ix);
-058         tx = ix - ty;
-059   
-060         /* setup temp aliases */
-061         tmpx = a->dp + tx;
-062         tmpy = b->dp + ty;
-063   
-064         /* this is the number of times the loop will iterrate, essentially 
-065            while (tx++ < a->used && ty-- >= 0) \{ ... \}
-066          */
-067         iy = MIN(a->used-tx, ty+1);
-068   
-069         /* execute loop */
-070         for (iz = 0; iz < iy; ++iz) \{
-071            _W += ((mp_word)*tmpx++)*((mp_word)*tmpy--);
-072         \}
-073   
-074         /* store term */
-075         W[ix] = ((mp_digit)_W) & MP_MASK;
-076   
-077         /* make next carry */
-078         _W = _W >> ((mp_word)DIGIT_BIT);
-079     \}
-080   
-081     /* store final carry */
-082     W[ix] = (mp_digit)(_W & MP_MASK);
-083   
-084     /* setup dest */
-085     olduse  = c->used;
-086     c->used = pa;
-087   
-088     \{
-089       register mp_digit *tmpc;
-090       tmpc = c->dp;
-091       for (ix = 0; ix < pa+1; ix++) \{
-092         /* now extract the previous digit [below the carry] */
-093         *tmpc++ = W[ix];
-094       \}
-095   
-096       /* clear unused digits [that existed in the old copy of c] */
-097       for (; ix < olduse; ix++) \{
-098         *tmpc++ = 0;
-099       \}
-100     \}
-101     mp_clamp (c);
-102     return MP_OKAY;
-103   \}
-104   #endif
-\end{alltt}
-\end{small}
-
-As per the pseudo--code we first calculate $pa$ (line 47) as the number of digits to output.  Next we begin the outer loop
-to produce the individual columns of the product.  We use the two aliases $tmpx$ and $tmpy$ (lines 61, 62) to point
-inside the two multiplicands quickly.  
-
-The inner loop (lines 70 to 72) of this implementation is where the tradeoff come into play.  Originally this comba 
-implementation was ``row--major'' which means it adds to each of the columns in each pass.  After the outer loop it would then fix 
-the carries.  This was very fast except it had an annoying drawback.  You had to read a mp\_word and two mp\_digits and write 
-one mp\_word per iteration.  On processors such as the Athlon XP and P4 this did not matter much since the cache bandwidth 
-is very high and it can keep the ALU fed with data.  It did, however, matter on older and embedded cpus where cache is often 
-slower and also often doesn't exist.  This new algorithm only performs two reads per iteration under the assumption that the 
-compiler has aliased $\_ \hat W$ to a CPU register.
-
-After the inner loop we store the current accumulator in $W$ and shift $\_ \hat W$ (lines 75, 78) to forward it as 
-a carry for the next pass.  After the outer loop we use the final carry (line 82) as the last digit of the product.  
-
-\subsection{Polynomial Basis Multiplication}
-To break the $O(n^2)$ barrier in multiplication requires a completely different look at integer multiplication.  In the following algorithms
-the use of polynomial basis representation for two integers $a$ and $b$ as $f(x) = \sum_{i=0}^{n} a_i x^i$ and  
-$g(x) = \sum_{i=0}^{n} b_i x^i$ respectively, is required.  In this system both $f(x)$ and $g(x)$ have $n + 1$ terms and are of the $n$'th degree.
- 
-The product $a \cdot b \equiv f(x)g(x)$ is the polynomial $W(x) = \sum_{i=0}^{2n} w_i x^i$.  The coefficients $w_i$ will
-directly yield the desired product when $\beta$ is substituted for $x$.  The direct solution to solve for the $2n + 1$ coefficients
-requires $O(n^2)$ time and would in practice be slower than the Comba technique.
-
-However, numerical analysis theory indicates that only $2n + 1$ distinct points in $W(x)$ are required to determine the values of the $2n + 1$ unknown 
-coefficients.   This means by finding $\zeta_y = W(y)$ for $2n + 1$ small values of $y$ the coefficients of $W(x)$ can be found with 
-Gaussian elimination.  This technique is also occasionally refered to as the \textit{interpolation technique} (\textit{references please...}) since in 
-effect an interpolation based on $2n + 1$ points will yield a polynomial equivalent to $W(x)$.  
-
-The coefficients of the polynomial $W(x)$ are unknown which makes finding $W(y)$ for any value of $y$ impossible.  However, since 
-$W(x) = f(x)g(x)$ the equivalent $\zeta_y = f(y) g(y)$ can be used in its place.  The benefit of this technique stems from the 
-fact that $f(y)$ and $g(y)$ are much smaller than either $a$ or $b$ respectively.  As a result finding the $2n + 1$ relations required 
-by multiplying $f(y)g(y)$ involves multiplying integers that are much smaller than either of the inputs.
-
-When picking points to gather relations there are always three obvious points to choose, $y = 0, 1$ and $ \infty$.  The $\zeta_0$ term
-is simply the product $W(0) = w_0 = a_0 \cdot b_0$.  The $\zeta_1$ term is the product 
-$W(1) = \left (\sum_{i = 0}^{n} a_i \right ) \left (\sum_{i = 0}^{n} b_i \right )$.  The third point $\zeta_{\infty}$ is less obvious but rather
-simple to explain.  The $2n + 1$'th coefficient of $W(x)$ is numerically equivalent to the most significant column in an integer multiplication.  
-The point at $\infty$ is used symbolically to represent the most significant column, that is $W(\infty) = w_{2n} = a_nb_n$.  Note that the 
-points at $y = 0$ and $\infty$ yield the coefficients $w_0$ and $w_{2n}$ directly.
-
-If more points are required they should be of small values and powers of two such as $2^q$ and the related \textit{mirror points} 
-$\left (2^q \right )^{2n}  \cdot \zeta_{2^{-q}}$ for small values of $q$.  The term ``mirror point'' stems from the fact that 
-$\left (2^q \right )^{2n}  \cdot \zeta_{2^{-q}}$ can be calculated in the exact opposite fashion as $\zeta_{2^q}$.  For
-example, when $n = 2$ and $q = 1$ then following two equations are equivalent to the point $\zeta_{2}$ and its mirror.
-
-\begin{eqnarray}
-\zeta_{2}                  = f(2)g(2) = (4a_2 + 2a_1 + a_0)(4b_2 + 2b_1 + b_0) \nonumber \\
-16 \cdot \zeta_{1 \over 2} = 4f({1\over 2}) \cdot 4g({1 \over 2}) = (a_2 + 2a_1 + 4a_0)(b_2 + 2b_1 + 4b_0)
-\end{eqnarray}
-
-Using such points will allow the values of $f(y)$ and $g(y)$ to be independently calculated using only left shifts.  For example, when $n = 2$ the
-polynomial $f(2^q)$ is equal to $2^q((2^qa_2) + a_1) + a_0$.  This technique of polynomial representation is known as Horner's method.  
-
-As a general rule of the algorithm when the inputs are split into $n$ parts each there are $2n - 1$ multiplications.  Each multiplication is of 
-multiplicands that have $n$ times fewer digits than the inputs.  The asymptotic running time of this algorithm is 
-$O \left ( k^{lg_n(2n - 1)} \right )$ for $k$ digit inputs (\textit{assuming they have the same number of digits}).  Figure~\ref{fig:exponent}
-summarizes the exponents for various values of $n$.
-
-\begin{figure}
-\begin{center}
-\begin{tabular}{|c|c|c|}
-\hline \textbf{Split into $n$ Parts} & \textbf{Exponent}  & \textbf{Notes}\\
-\hline $2$ & $1.584962501$ & This is Karatsuba Multiplication. \\
-\hline $3$ & $1.464973520$ & This is Toom-Cook Multiplication. \\
-\hline $4$ & $1.403677461$ &\\
-\hline $5$ & $1.365212389$ &\\
-\hline $10$ & $1.278753601$ &\\
-\hline $100$ & $1.149426538$ &\\
-\hline $1000$ & $1.100270931$ &\\
-\hline $10000$ & $1.075252070$ &\\
-\hline
-\end{tabular}
-\end{center}
-\caption{Asymptotic Running Time of Polynomial Basis Multiplication}
-\label{fig:exponent}
-\end{figure}
-
-At first it may seem like a good idea to choose $n = 1000$ since the exponent is approximately $1.1$.  However, the overhead
-of solving for the 2001 terms of $W(x)$ will certainly consume any savings the algorithm could offer for all but exceedingly large
-numbers.  
-
-\subsubsection{Cutoff Point}
-The polynomial basis multiplication algorithms all require fewer single precision multiplications than a straight Comba approach.  However, 
-the algorithms incur an overhead (\textit{at the $O(n)$ work level}) since they require a system of equations to be solved.  This makes the
-polynomial basis approach more costly to use with small inputs.
-
-Let $m$ represent the number of digits in the multiplicands (\textit{assume both multiplicands have the same number of digits}).  There exists a 
-point $y$ such that when $m < y$ the polynomial basis algorithms are more costly than Comba, when $m = y$ they are roughly the same cost and 
-when $m > y$ the Comba methods are slower than the polynomial basis algorithms.  
-
-The exact location of $y$ depends on several key architectural elements of the computer platform in question.
-
-\begin{enumerate}
-\item  The ratio of clock cycles for single precision multiplication versus other simpler operations such as addition, shifting, etc.  For example
-on the AMD Athlon the ratio is roughly $17 : 1$ while on the Intel P4 it is $29 : 1$.  The higher the ratio in favour of multiplication the lower
-the cutoff point $y$ will be.  
-
-\item  The complexity of the linear system of equations (\textit{for the coefficients of $W(x)$}) is.  Generally speaking as the number of splits
-grows the complexity grows substantially.  Ideally solving the system will only involve addition, subtraction and shifting of integers.  This
-directly reflects on the ratio previous mentioned.
-
-\item  To a lesser extent memory bandwidth and function call overheads.  Provided the values are in the processor cache this is less of an
-influence over the cutoff point.
-
-\end{enumerate}
-
-A clean cutoff point separation occurs when a point $y$ is found such that all of the cutoff point conditions are met.  For example, if the point
-is too low then there will be values of $m$ such that $m > y$ and the Comba method is still faster.  Finding the cutoff points is fairly simple when
-a high resolution timer is available.  
-
-\subsection{Karatsuba Multiplication}
-Karatsuba \cite{KARA} multiplication when originally proposed in 1962 was among the first set of algorithms to break the $O(n^2)$ barrier for
-general purpose multiplication.  Given two polynomial basis representations $f(x) = ax + b$ and $g(x) = cx + d$, Karatsuba proved with 
-light algebra \cite{KARAP} that the following polynomial is equivalent to multiplication of the two integers the polynomials represent.
-
-\begin{equation}
-f(x) \cdot g(x) = acx^2 + ((a - b)(c - d) - (ac + bd))x + bd
-\end{equation}
-
-Using the observation that $ac$ and $bd$ could be re-used only three half sized multiplications would be required to produce the product.  Applying
-this algorithm recursively, the work factor becomes $O(n^{lg(3)})$ which is substantially better than the work factor $O(n^2)$ of the Comba technique.  It turns 
-out what Karatsuba did not know or at least did not publish was that this is simply polynomial basis multiplication with the points 
-$\zeta_0$, $\zeta_{\infty}$ and $-\zeta_{-1}$.  Consider the resultant system of equations.
-
-\begin{center}
-\begin{tabular}{rcrcrcrc}
-$\zeta_{0}$ &      $=$ &  &  &  & & $w_0$ \\
-$-\zeta_{-1}$ &    $=$ & $-w_2$ & $+$ & $w_1$ & $-$ & $w_0$ \\
-$\zeta_{\infty}$ & $=$ & $w_2$ &  & &  & \\
-\end{tabular}
-\end{center}
-
-By adding the first and last equation to the equation in the middle the term $w_1$ can be isolated and all three coefficients solved for.  The simplicity
-of this system of equations has made Karatsuba fairly popular.  In fact the cutoff point is often fairly low\footnote{With LibTomMath 0.18 it is 70 and 109 digits for the Intel P4 and AMD Athlon respectively.}
-making it an ideal algorithm to speed up certain public key cryptosystems such as RSA and Diffie-Hellman.  It is worth noting that the point 
-$\zeta_1$ could be substituted for $-\zeta_{-1}$.  In this case the first and third row are subtracted instead of added to the second row.  
-
-\newpage\begin{figure}[!here]
-\begin{small}
-\begin{center}
-\begin{tabular}{l}
-\hline Algorithm \textbf{mp\_karatsuba\_mul}. \\
-\textbf{Input}.   mp\_int $a$ and mp\_int $b$ \\
-\textbf{Output}.  $c \leftarrow \vert a \vert \cdot \vert b \vert$ \\
-\hline \\
-1.  Init the following mp\_int variables: $x0$, $x1$, $y0$, $y1$, $t1$, $x0y0$, $x1y1$.\\
-2.  If step 2 failed then return(\textit{MP\_MEM}). \\
-\\
-Split the input.  e.g. $a = x1 \cdot \beta^B + x0$ \\
-3.  $B \leftarrow \mbox{min}(a.used, b.used)/2$ \\
-4.  $x0 \leftarrow a \mbox{ (mod }\beta^B\mbox{)}$ (\textit{mp\_mod\_2d}) \\
-5.  $y0 \leftarrow b \mbox{ (mod }\beta^B\mbox{)}$ \\
-6.  $x1 \leftarrow \lfloor a / \beta^B \rfloor$ (\textit{mp\_rshd}) \\
-7.  $y1 \leftarrow \lfloor b / \beta^B \rfloor$ \\
-\\
-Calculate the three products. \\
-8.  $x0y0 \leftarrow x0 \cdot y0$ (\textit{mp\_mul}) \\
-9.  $x1y1 \leftarrow x1 \cdot y1$ \\
-10.  $t1 \leftarrow x1 - x0$ (\textit{mp\_sub}) \\
-11.  $x0 \leftarrow y1 - y0$ \\
-12.  $t1 \leftarrow t1 \cdot x0$ \\
-\\
-Calculate the middle term. \\
-13.  $x0 \leftarrow x0y0 + x1y1$ \\
-14.  $t1 \leftarrow x0 - t1$ \\
-\\
-Calculate the final product. \\
-15.  $t1 \leftarrow t1 \cdot \beta^B$ (\textit{mp\_lshd}) \\
-16.  $x1y1 \leftarrow x1y1 \cdot \beta^{2B}$ \\
-17.  $t1 \leftarrow x0y0 + t1$ \\
-18.  $c \leftarrow t1 + x1y1$ \\
-19.  Clear all of the temporary variables. \\
-20.  Return(\textit{MP\_OKAY}).\\
-\hline 
-\end{tabular}
-\end{center}
-\end{small}
-\caption{Algorithm mp\_karatsuba\_mul}
-\end{figure}
-
-\textbf{Algorithm mp\_karatsuba\_mul.}
-This algorithm computes the unsigned product of two inputs using the Karatsuba multiplication algorithm.  It is loosely based on the description
-from Knuth \cite[pp. 294-295]{TAOCPV2}.  
-
-\index{radix point}
-In order to split the two inputs into their respective halves, a suitable \textit{radix point} must be chosen.  The radix point chosen must
-be used for both of the inputs meaning that it must be smaller than the smallest input.  Step 3 chooses the radix point $B$ as half of the 
-smallest input \textbf{used} count.  After the radix point is chosen the inputs are split into lower and upper halves.  Step 4 and 5 
-compute the lower halves.  Step 6 and 7 computer the upper halves.  
-
-After the halves have been computed the three intermediate half-size products must be computed.  Step 8 and 9 compute the trivial products
-$x0 \cdot y0$ and $x1 \cdot y1$.  The mp\_int $x0$ is used as a temporary variable after $x1 - x0$ has been computed.  By using $x0$ instead
-of an additional temporary variable, the algorithm can avoid an addition memory allocation operation.
-
-The remaining steps 13 through 18 compute the Karatsuba polynomial through a variety of digit shifting and addition operations.
-
-\vspace{+3mm}\begin{small}
-\hspace{-5.1mm}{\bf File}: bn\_mp\_karatsuba\_mul.c
-\vspace{-3mm}
-\begin{alltt}
-016   
-017   /* c = |a| * |b| using Karatsuba Multiplication using 
-018    * three half size multiplications
-019    *
-020    * Let B represent the radix [e.g. 2**DIGIT_BIT] and 
-021    * let n represent half of the number of digits in 
-022    * the min(a,b)
-023    *
-024    * a = a1 * B**n + a0
-025    * b = b1 * B**n + b0
-026    *
-027    * Then, a * b => 
-028      a1b1 * B**2n + ((a1 - a0)(b1 - b0) + a0b0 + a1b1) * B + a0b0
-029    *
-030    * Note that a1b1 and a0b0 are used twice and only need to be 
-031    * computed once.  So in total three half size (half # of 
-032    * digit) multiplications are performed, a0b0, a1b1 and 
-033    * (a1-b1)(a0-b0)
-034    *
-035    * Note that a multiplication of half the digits requires
-036    * 1/4th the number of single precision multiplications so in 
-037    * total after one call 25% of the single precision multiplications 
-038    * are saved.  Note also that the call to mp_mul can end up back 
-039    * in this function if the a0, a1, b0, or b1 are above the threshold.  
-040    * This is known as divide-and-conquer and leads to the famous 
-041    * O(N**lg(3)) or O(N**1.584) work which is asymptopically lower than 
-042    * the standard O(N**2) that the baseline/comba methods use.  
-043    * Generally though the overhead of this method doesn't pay off 
-044    * until a certain size (N ~ 80) is reached.
-045    */
-046   int mp_karatsuba_mul (mp_int * a, mp_int * b, mp_int * c)
-047   \{
-048     mp_int  x0, x1, y0, y1, t1, x0y0, x1y1;
-049     int     B, err;
-050   
-051     /* default the return code to an error */
-052     err = MP_MEM;
-053   
-054     /* min # of digits */
-055     B = MIN (a->used, b->used);
-056   
-057     /* now divide in two */
-058     B = B >> 1;
-059   
-060     /* init copy all the temps */
-061     if (mp_init_size (&x0, B) != MP_OKAY)
-062       goto ERR;
-063     if (mp_init_size (&x1, a->used - B) != MP_OKAY)
-064       goto X0;
-065     if (mp_init_size (&y0, B) != MP_OKAY)
-066       goto X1;
-067     if (mp_init_size (&y1, b->used - B) != MP_OKAY)
-068       goto Y0;
-069   
-070     /* init temps */
-071     if (mp_init_size (&t1, B * 2) != MP_OKAY)
-072       goto Y1;
-073     if (mp_init_size (&x0y0, B * 2) != MP_OKAY)
-074       goto T1;
-075     if (mp_init_size (&x1y1, B * 2) != MP_OKAY)
-076       goto X0Y0;
-077   
-078     /* now shift the digits */
-079     x0.used = y0.used = B;
-080     x1.used = a->used - B;
-081     y1.used = b->used - B;
-082   
-083     \{
-084       register int x;
-085       register mp_digit *tmpa, *tmpb, *tmpx, *tmpy;
-086   
-087       /* we copy the digits directly instead of using higher level functions
-088        * since we also need to shift the digits
-089        */
-090       tmpa = a->dp;
-091       tmpb = b->dp;
-092   
-093       tmpx = x0.dp;
-094       tmpy = y0.dp;
-095       for (x = 0; x < B; x++) \{
-096         *tmpx++ = *tmpa++;
-097         *tmpy++ = *tmpb++;
-098       \}
-099   
-100       tmpx = x1.dp;
-101       for (x = B; x < a->used; x++) \{
-102         *tmpx++ = *tmpa++;
-103       \}
-104   
-105       tmpy = y1.dp;
-106       for (x = B; x < b->used; x++) \{
-107         *tmpy++ = *tmpb++;
-108       \}
-109     \}
-110   
-111     /* only need to clamp the lower words since by definition the 
-112      * upper words x1/y1 must have a known number of digits
-113      */
-114     mp_clamp (&x0);
-115     mp_clamp (&y0);
-116   
-117     /* now calc the products x0y0 and x1y1 */
-118     /* after this x0 is no longer required, free temp [x0==t2]! */
-119     if (mp_mul (&x0, &y0, &x0y0) != MP_OKAY)  
-120       goto X1Y1;          /* x0y0 = x0*y0 */
-121     if (mp_mul (&x1, &y1, &x1y1) != MP_OKAY)
-122       goto X1Y1;          /* x1y1 = x1*y1 */
-123   
-124     /* now calc x1-x0 and y1-y0 */
-125     if (mp_sub (&x1, &x0, &t1) != MP_OKAY)
-126       goto X1Y1;          /* t1 = x1 - x0 */
-127     if (mp_sub (&y1, &y0, &x0) != MP_OKAY)
-128       goto X1Y1;          /* t2 = y1 - y0 */
-129     if (mp_mul (&t1, &x0, &t1) != MP_OKAY)
-130       goto X1Y1;          /* t1 = (x1 - x0) * (y1 - y0) */
-131   
-132     /* add x0y0 */
-133     if (mp_add (&x0y0, &x1y1, &x0) != MP_OKAY)
-134       goto X1Y1;          /* t2 = x0y0 + x1y1 */
-135     if (mp_sub (&x0, &t1, &t1) != MP_OKAY)
-136       goto X1Y1;          /* t1 = x0y0 + x1y1 - (x1-x0)*(y1-y0) */
-137   
-138     /* shift by B */
-139     if (mp_lshd (&t1, B) != MP_OKAY)
-140       goto X1Y1;          /* t1 = (x0y0 + x1y1 - (x1-x0)*(y1-y0))<<B */
-141     if (mp_lshd (&x1y1, B * 2) != MP_OKAY)
-142       goto X1Y1;          /* x1y1 = x1y1 << 2*B */
-143   
-144     if (mp_add (&x0y0, &t1, &t1) != MP_OKAY)
-145       goto X1Y1;          /* t1 = x0y0 + t1 */
-146     if (mp_add (&t1, &x1y1, c) != MP_OKAY)
-147       goto X1Y1;          /* t1 = x0y0 + t1 + x1y1 */
-148   
-149     /* Algorithm succeeded set the return code to MP_OKAY */
-150     err = MP_OKAY;
-151   
-152   X1Y1:mp_clear (&x1y1);
-153   X0Y0:mp_clear (&x0y0);
-154   T1:mp_clear (&t1);
-155   Y1:mp_clear (&y1);
-156   Y0:mp_clear (&y0);
-157   X1:mp_clear (&x1);
-158   X0:mp_clear (&x0);
-159   ERR:
-160     return err;
-161   \}
-162   #endif
-\end{alltt}
-\end{small}
-
-The new coding element in this routine, not  seen in previous routines, is the usage of goto statements.  The conventional
-wisdom is that goto statements should be avoided.  This is generally true, however when every single function call can fail, it makes sense
-to handle error recovery with a single piece of code.  Lines 61 to 75 handle initializing all of the temporary variables 
-required.  Note how each of the if statements goes to a different label in case of failure.  This allows the routine to correctly free only
-the temporaries that have been successfully allocated so far.
-
-The temporary variables are all initialized using the mp\_init\_size routine since they are expected to be large.  This saves the 
-additional reallocation that would have been necessary.  Also $x0$, $x1$, $y0$ and $y1$ have to be able to hold at least their respective
-number of digits for the next section of code.
-
-The first algebraic portion of the algorithm is to split the two inputs into their halves.  However, instead of using mp\_mod\_2d and mp\_rshd
-to extract the halves, the respective code has been placed inline within the body of the function.  To initialize the halves, the \textbf{used} and 
-\textbf{sign} members are copied first.  The first for loop on line 101 copies the lower halves.  Since they are both the same magnitude it 
-is simpler to calculate both lower halves in a single loop.  The for loop on lines 106 and 106 calculate the upper halves $x1$ and 
-$y1$ respectively.
-
-By inlining the calculation of the halves, the Karatsuba multiplier has a slightly lower overhead and can be used for smaller magnitude inputs.
-
-When line 150 is reached, the algorithm has completed succesfully.  The ``error status'' variable $err$ is set to \textbf{MP\_OKAY} so that
-the same code that handles errors can be used to clear the temporary variables and return.  
-
-\subsection{Toom-Cook $3$-Way Multiplication}
-Toom-Cook $3$-Way \cite{TOOM} multiplication is essentially the polynomial basis algorithm for $n = 2$ except that the points  are 
-chosen such that $\zeta$ is easy to compute and the resulting system of equations easy to reduce.  Here, the points $\zeta_{0}$, 
-$16 \cdot \zeta_{1 \over 2}$, $\zeta_1$, $\zeta_2$ and $\zeta_{\infty}$ make up the five required points to solve for the coefficients 
-of the $W(x)$.
-
-With the five relations that Toom-Cook specifies, the following system of equations is formed.
-
-\begin{center}
-\begin{tabular}{rcrcrcrcrcr}
-$\zeta_0$                    & $=$ & $0w_4$ & $+$ & $0w_3$ & $+$ & $0w_2$ & $+$ & $0w_1$ & $+$ & $1w_0$  \\
-$16 \cdot \zeta_{1 \over 2}$ & $=$ & $1w_4$ & $+$ & $2w_3$ & $+$ & $4w_2$ & $+$ & $8w_1$ & $+$ & $16w_0$  \\
-$\zeta_1$                    & $=$ & $1w_4$ & $+$ & $1w_3$ & $+$ & $1w_2$ & $+$ & $1w_1$ & $+$ & $1w_0$  \\
-$\zeta_2$                    & $=$ & $16w_4$ & $+$ & $8w_3$ & $+$ & $4w_2$ & $+$ & $2w_1$ & $+$ & $1w_0$  \\
-$\zeta_{\infty}$             & $=$ & $1w_4$ & $+$ & $0w_3$ & $+$ & $0w_2$ & $+$ & $0w_1$ & $+$ & $0w_0$  \\
-\end{tabular}
-\end{center}
-
-A trivial solution to this matrix requires $12$ subtractions, two multiplications by a small power of two, two divisions by a small power
-of two, two divisions by three and one multiplication by three.  All of these $19$ sub-operations require less than quadratic time, meaning that
-the algorithm can be faster than a baseline multiplication.  However, the greater complexity of this algorithm places the cutoff point
-(\textbf{TOOM\_MUL\_CUTOFF}) where Toom-Cook becomes more efficient much higher than the Karatsuba cutoff point.  
-
-\begin{figure}[!here]
-\begin{small}
-\begin{center}
-\begin{tabular}{l}
-\hline Algorithm \textbf{mp\_toom\_mul}. \\
-\textbf{Input}.   mp\_int $a$ and mp\_int $b$ \\
-\textbf{Output}.  $c \leftarrow  a  \cdot  b $ \\
-\hline \\
-Split $a$ and $b$ into three pieces.  E.g. $a = a_2 \beta^{2k} + a_1 \beta^{k} + a_0$ \\
-1.  $k \leftarrow \lfloor \mbox{min}(a.used, b.used) / 3 \rfloor$ \\
-2.  $a_0 \leftarrow a \mbox{ (mod }\beta^{k}\mbox{)}$ \\
-3.  $a_1 \leftarrow \lfloor a / \beta^k \rfloor$, $a_1 \leftarrow a_1 \mbox{ (mod }\beta^{k}\mbox{)}$ \\
-4.  $a_2 \leftarrow \lfloor a / \beta^{2k} \rfloor$, $a_2 \leftarrow a_2 \mbox{ (mod }\beta^{k}\mbox{)}$ \\
-5.  $b_0 \leftarrow a \mbox{ (mod }\beta^{k}\mbox{)}$ \\
-6.  $b_1 \leftarrow \lfloor a / \beta^k \rfloor$, $b_1 \leftarrow b_1 \mbox{ (mod }\beta^{k}\mbox{)}$ \\
-7.  $b_2 \leftarrow \lfloor a / \beta^{2k} \rfloor$, $b_2 \leftarrow b_2 \mbox{ (mod }\beta^{k}\mbox{)}$ \\
-\\
-Find the five equations for $w_0, w_1, ..., w_4$. \\
-8.  $w_0 \leftarrow a_0 \cdot b_0$ \\
-9.  $w_4 \leftarrow a_2 \cdot b_2$ \\
-10. $tmp_1 \leftarrow 2 \cdot a_0$, $tmp_1 \leftarrow a_1 + tmp_1$, $tmp_1 \leftarrow 2 \cdot tmp_1$, $tmp_1 \leftarrow tmp_1 + a_2$ \\
-11. $tmp_2 \leftarrow 2 \cdot b_0$, $tmp_2 \leftarrow b_1 + tmp_2$, $tmp_2 \leftarrow 2 \cdot tmp_2$, $tmp_2 \leftarrow tmp_2 + b_2$ \\
-12. $w_1 \leftarrow tmp_1 \cdot tmp_2$ \\
-13. $tmp_1 \leftarrow 2 \cdot a_2$, $tmp_1 \leftarrow a_1 + tmp_1$, $tmp_1 \leftarrow 2 \cdot tmp_1$, $tmp_1 \leftarrow tmp_1 + a_0$ \\
-14. $tmp_2 \leftarrow 2 \cdot b_2$, $tmp_2 \leftarrow b_1 + tmp_2$, $tmp_2 \leftarrow 2 \cdot tmp_2$, $tmp_2 \leftarrow tmp_2 + b_0$ \\
-15. $w_3 \leftarrow tmp_1 \cdot tmp_2$ \\
-16. $tmp_1 \leftarrow a_0 + a_1$, $tmp_1 \leftarrow tmp_1 + a_2$, $tmp_2 \leftarrow b_0 + b_1$, $tmp_2 \leftarrow tmp_2 + b_2$ \\
-17. $w_2 \leftarrow tmp_1 \cdot tmp_2$ \\
-\\
-Continued on the next page.\\
-\hline
-\end{tabular}
-\end{center}
-\end{small}
-\caption{Algorithm mp\_toom\_mul}
-\end{figure}
-
-\newpage\begin{figure}[!here]
-\begin{small}
-\begin{center}
-\begin{tabular}{l}
-\hline Algorithm \textbf{mp\_toom\_mul} (continued). \\
-\textbf{Input}.   mp\_int $a$ and mp\_int $b$ \\
-\textbf{Output}.  $c \leftarrow a \cdot  b $ \\
-\hline \\
-Now solve the system of equations. \\
-18. $w_1 \leftarrow w_4 - w_1$, $w_3 \leftarrow w_3 - w_0$ \\
-19. $w_1 \leftarrow \lfloor w_1 / 2 \rfloor$, $w_3 \leftarrow \lfloor w_3 / 2 \rfloor$ \\
-20. $w_2 \leftarrow w_2 - w_0$, $w_2 \leftarrow w_2 - w_4$ \\
-21. $w_1 \leftarrow w_1 - w_2$, $w_3 \leftarrow w_3 - w_2$ \\
-22. $tmp_1 \leftarrow 8 \cdot w_0$, $w_1 \leftarrow w_1 - tmp_1$, $tmp_1 \leftarrow 8 \cdot w_4$, $w_3 \leftarrow w_3 - tmp_1$ \\
-23. $w_2 \leftarrow 3 \cdot w_2$, $w_2 \leftarrow w_2 - w_1$, $w_2 \leftarrow w_2 - w_3$ \\
-24. $w_1 \leftarrow w_1 - w_2$, $w_3 \leftarrow w_3 - w_2$ \\
-25. $w_1 \leftarrow \lfloor w_1 / 3 \rfloor, w_3 \leftarrow \lfloor w_3 / 3 \rfloor$ \\
-\\
-Now substitute $\beta^k$ for $x$ by shifting $w_0, w_1, ..., w_4$. \\
-26. for $n$ from $1$ to $4$ do \\
-\hspace{3mm}26.1  $w_n \leftarrow w_n \cdot \beta^{nk}$ \\
-27. $c \leftarrow w_0 + w_1$, $c \leftarrow c + w_2$, $c \leftarrow c + w_3$, $c \leftarrow c + w_4$ \\
-28. Return(\textit{MP\_OKAY}) \\
-\hline
-\end{tabular}
-\end{center}
-\end{small}
-\caption{Algorithm mp\_toom\_mul (continued)}
-\end{figure}
-
-\textbf{Algorithm mp\_toom\_mul.}
-This algorithm computes the product of two mp\_int variables $a$ and $b$ using the Toom-Cook approach.  Compared to the Karatsuba multiplication, this 
-algorithm has a lower asymptotic running time of approximately $O(n^{1.464})$ but at an obvious cost in overhead.  In this
-description, several statements have been compounded to save space.  The intention is that the statements are executed from left to right across
-any given step.
-
-The two inputs $a$ and $b$ are first split into three $k$-digit integers $a_0, a_1, a_2$ and $b_0, b_1, b_2$ respectively.  From these smaller
-integers the coefficients of the polynomial basis representations $f(x)$ and $g(x)$ are known and can be used to find the relations required.
-
-The first two relations $w_0$ and $w_4$ are the points $\zeta_{0}$ and $\zeta_{\infty}$ respectively.  The relation $w_1, w_2$ and $w_3$ correspond
-to the points $16 \cdot \zeta_{1 \over 2}, \zeta_{2}$ and $\zeta_{1}$ respectively.  These are found using logical shifts to independently find
-$f(y)$ and $g(y)$ which significantly speeds up the algorithm.
-
-After the five relations $w_0, w_1, \ldots, w_4$ have been computed, the system they represent must be solved in order for the unknown coefficients 
-$w_1, w_2$ and $w_3$ to be isolated.  The steps 18 through 25 perform the system reduction required as previously described.  Each step of
-the reduction represents the comparable matrix operation that would be performed had this been performed by pencil.  For example, step 18 indicates
-that row $1$ must be subtracted from row $4$ and simultaneously row $0$ subtracted from row $3$.  
-
-Once the coeffients have been isolated, the polynomial $W(x) = \sum_{i=0}^{2n} w_i x^i$ is known.  By substituting $\beta^{k}$ for $x$, the integer 
-result $a \cdot b$ is produced.
-
-\vspace{+3mm}\begin{small}
-\hspace{-5.1mm}{\bf File}: bn\_mp\_toom\_mul.c
-\vspace{-3mm}
-\begin{alltt}
-016   
-017   /* multiplication using the Toom-Cook 3-way algorithm 
-018    *
-019    * Much more complicated than Karatsuba but has a lower 
-020    * asymptotic running time of O(N**1.464).  This algorithm is 
-021    * only particularly useful on VERY large inputs 
-022    * (we're talking 1000s of digits here...).
-023   */
-024   int mp_toom_mul(mp_int *a, mp_int *b, mp_int *c)
-025   \{
-026       mp_int w0, w1, w2, w3, w4, tmp1, tmp2, a0, a1, a2, b0, b1, b2;
-027       int res, B;
-028           
-029       /* init temps */
-030       if ((res = mp_init_multi(&w0, &w1, &w2, &w3, &w4, 
-031                                &a0, &a1, &a2, &b0, &b1, 
-032                                &b2, &tmp1, &tmp2, NULL)) != MP_OKAY) \{
-033          return res;
-034       \}
-035       
-036       /* B */
-037       B = MIN(a->used, b->used) / 3;
-038       
-039       /* a = a2 * B**2 + a1 * B + a0 */
-040       if ((res = mp_mod_2d(a, DIGIT_BIT * B, &a0)) != MP_OKAY) \{
-041          goto ERR;
-042       \}
-043   
-044       if ((res = mp_copy(a, &a1)) != MP_OKAY) \{
-045          goto ERR;
-046       \}
-047       mp_rshd(&a1, B);
-048       mp_mod_2d(&a1, DIGIT_BIT * B, &a1);
-049   
-050       if ((res = mp_copy(a, &a2)) != MP_OKAY) \{
-051          goto ERR;
-052       \}
-053       mp_rshd(&a2, B*2);
-054       
-055       /* b = b2 * B**2 + b1 * B + b0 */
-056       if ((res = mp_mod_2d(b, DIGIT_BIT * B, &b0)) != MP_OKAY) \{
-057          goto ERR;
-058       \}
-059   
-060       if ((res = mp_copy(b, &b1)) != MP_OKAY) \{
-061          goto ERR;
-062       \}
-063       mp_rshd(&b1, B);
-064       mp_mod_2d(&b1, DIGIT_BIT * B, &b1);
-065   
-066       if ((res = mp_copy(b, &b2)) != MP_OKAY) \{
-067          goto ERR;
-068       \}
-069       mp_rshd(&b2, B*2);
-070       
-071       /* w0 = a0*b0 */
-072       if ((res = mp_mul(&a0, &b0, &w0)) != MP_OKAY) \{
-073          goto ERR;
-074       \}
-075       
-076       /* w4 = a2 * b2 */
-077       if ((res = mp_mul(&a2, &b2, &w4)) != MP_OKAY) \{
-078          goto ERR;
-079       \}
-080       
-081       /* w1 = (a2 + 2(a1 + 2a0))(b2 + 2(b1 + 2b0)) */
-082       if ((res = mp_mul_2(&a0, &tmp1)) != MP_OKAY) \{
-083          goto ERR;
-084       \}
-085       if ((res = mp_add(&tmp1, &a1, &tmp1)) != MP_OKAY) \{
-086          goto ERR;
-087       \}
-088       if ((res = mp_mul_2(&tmp1, &tmp1)) != MP_OKAY) \{
-089          goto ERR;
-090       \}
-091       if ((res = mp_add(&tmp1, &a2, &tmp1)) != MP_OKAY) \{
-092          goto ERR;
-093       \}
-094       
-095       if ((res = mp_mul_2(&b0, &tmp2)) != MP_OKAY) \{
-096          goto ERR;
-097       \}
-098       if ((res = mp_add(&tmp2, &b1, &tmp2)) != MP_OKAY) \{
-099          goto ERR;
-100       \}
-101       if ((res = mp_mul_2(&tmp2, &tmp2)) != MP_OKAY) \{
-102          goto ERR;
-103       \}
-104       if ((res = mp_add(&tmp2, &b2, &tmp2)) != MP_OKAY) \{
-105          goto ERR;
-106       \}
-107       
-108       if ((res = mp_mul(&tmp1, &tmp2, &w1)) != MP_OKAY) \{
-109          goto ERR;
-110       \}
-111       
-112       /* w3 = (a0 + 2(a1 + 2a2))(b0 + 2(b1 + 2b2)) */
-113       if ((res = mp_mul_2(&a2, &tmp1)) != MP_OKAY) \{
-114          goto ERR;
-115       \}
-116       if ((res = mp_add(&tmp1, &a1, &tmp1)) != MP_OKAY) \{
-117          goto ERR;
-118       \}
-119       if ((res = mp_mul_2(&tmp1, &tmp1)) != MP_OKAY) \{
-120          goto ERR;
-121       \}
-122       if ((res = mp_add(&tmp1, &a0, &tmp1)) != MP_OKAY) \{
-123          goto ERR;
-124       \}
-125       
-126       if ((res = mp_mul_2(&b2, &tmp2)) != MP_OKAY) \{
-127          goto ERR;
-128       \}
-129       if ((res = mp_add(&tmp2, &b1, &tmp2)) != MP_OKAY) \{
-130          goto ERR;
-131       \}
-132       if ((res = mp_mul_2(&tmp2, &tmp2)) != MP_OKAY) \{
-133          goto ERR;
-134       \}
-135       if ((res = mp_add(&tmp2, &b0, &tmp2)) != MP_OKAY) \{
-136          goto ERR;
-137       \}
-138       
-139       if ((res = mp_mul(&tmp1, &tmp2, &w3)) != MP_OKAY) \{
-140          goto ERR;
-141       \}
-142       
-143   
-144       /* w2 = (a2 + a1 + a0)(b2 + b1 + b0) */
-145       if ((res = mp_add(&a2, &a1, &tmp1)) != MP_OKAY) \{
-146          goto ERR;
-147       \}
-148       if ((res = mp_add(&tmp1, &a0, &tmp1)) != MP_OKAY) \{
-149          goto ERR;
-150       \}
-151       if ((res = mp_add(&b2, &b1, &tmp2)) != MP_OKAY) \{
-152          goto ERR;
-153       \}
-154       if ((res = mp_add(&tmp2, &b0, &tmp2)) != MP_OKAY) \{
-155          goto ERR;
-156       \}
-157       if ((res = mp_mul(&tmp1, &tmp2, &w2)) != MP_OKAY) \{
-158          goto ERR;
-159       \}
-160       
-161       /* now solve the matrix 
-162       
-163          0  0  0  0  1
-164          1  2  4  8  16
-165          1  1  1  1  1
-166          16 8  4  2  1
-167          1  0  0  0  0
-168          
-169          using 12 subtractions, 4 shifts, 
-170                 2 small divisions and 1 small multiplication 
-171        */
-172        
-173        /* r1 - r4 */
-174        if ((res = mp_sub(&w1, &w4, &w1)) != MP_OKAY) \{
-175           goto ERR;
-176        \}
-177        /* r3 - r0 */
-178        if ((res = mp_sub(&w3, &w0, &w3)) != MP_OKAY) \{
-179           goto ERR;
-180        \}
-181        /* r1/2 */
-182        if ((res = mp_div_2(&w1, &w1)) != MP_OKAY) \{
-183           goto ERR;
-184        \}
-185        /* r3/2 */
-186        if ((res = mp_div_2(&w3, &w3)) != MP_OKAY) \{
-187           goto ERR;
-188        \}
-189        /* r2 - r0 - r4 */
-190        if ((res = mp_sub(&w2, &w0, &w2)) != MP_OKAY) \{
-191           goto ERR;
-192        \}
-193        if ((res = mp_sub(&w2, &w4, &w2)) != MP_OKAY) \{
-194           goto ERR;
-195        \}
-196        /* r1 - r2 */
-197        if ((res = mp_sub(&w1, &w2, &w1)) != MP_OKAY) \{
-198           goto ERR;
-199        \}
-200        /* r3 - r2 */
-201        if ((res = mp_sub(&w3, &w2, &w3)) != MP_OKAY) \{
-202           goto ERR;
-203        \}
-204        /* r1 - 8r0 */
-205        if ((res = mp_mul_2d(&w0, 3, &tmp1)) != MP_OKAY) \{
-206           goto ERR;
-207        \}
-208        if ((res = mp_sub(&w1, &tmp1, &w1)) != MP_OKAY) \{
-209           goto ERR;
-210        \}
-211        /* r3 - 8r4 */
-212        if ((res = mp_mul_2d(&w4, 3, &tmp1)) != MP_OKAY) \{
-213           goto ERR;
-214        \}
-215        if ((res = mp_sub(&w3, &tmp1, &w3)) != MP_OKAY) \{
-216           goto ERR;
-217        \}
-218        /* 3r2 - r1 - r3 */
-219        if ((res = mp_mul_d(&w2, 3, &w2)) != MP_OKAY) \{
-220           goto ERR;
-221        \}
-222        if ((res = mp_sub(&w2, &w1, &w2)) != MP_OKAY) \{
-223           goto ERR;
-224        \}
-225        if ((res = mp_sub(&w2, &w3, &w2)) != MP_OKAY) \{
-226           goto ERR;
-227        \}
-228        /* r1 - r2 */
-229        if ((res = mp_sub(&w1, &w2, &w1)) != MP_OKAY) \{
-230           goto ERR;
-231        \}
-232        /* r3 - r2 */
-233        if ((res = mp_sub(&w3, &w2, &w3)) != MP_OKAY) \{
-234           goto ERR;
-235        \}
-236        /* r1/3 */
-237        if ((res = mp_div_3(&w1, &w1, NULL)) != MP_OKAY) \{
-238           goto ERR;
-239        \}
-240        /* r3/3 */
-241        if ((res = mp_div_3(&w3, &w3, NULL)) != MP_OKAY) \{
-242           goto ERR;
-243        \}
-244        
-245        /* at this point shift W[n] by B*n */
-246        if ((res = mp_lshd(&w1, 1*B)) != MP_OKAY) \{
-247           goto ERR;
-248        \}
-249        if ((res = mp_lshd(&w2, 2*B)) != MP_OKAY) \{
-250           goto ERR;
-251        \}
-252        if ((res = mp_lshd(&w3, 3*B)) != MP_OKAY) \{
-253           goto ERR;
-254        \}
-255        if ((res = mp_lshd(&w4, 4*B)) != MP_OKAY) \{
-256           goto ERR;
-257        \}     
-258        
-259        if ((res = mp_add(&w0, &w1, c)) != MP_OKAY) \{
-260           goto ERR;
-261        \}
-262        if ((res = mp_add(&w2, &w3, &tmp1)) != MP_OKAY) \{
-263           goto ERR;
-264        \}
-265        if ((res = mp_add(&w4, &tmp1, &tmp1)) != MP_OKAY) \{
-266           goto ERR;
-267        \}
-268        if ((res = mp_add(&tmp1, c, c)) != MP_OKAY) \{
-269           goto ERR;
-270        \}     
-271        
-272   ERR:
-273        mp_clear_multi(&w0, &w1, &w2, &w3, &w4, 
-274                       &a0, &a1, &a2, &b0, &b1, 
-275                       &b2, &tmp1, &tmp2, NULL);
-276        return res;
-277   \}     
-278        
-279   #endif
-\end{alltt}
-\end{small}
-
-The first obvious thing to note is that this algorithm is complicated.  The complexity is worth it if you are multiplying very 
-large numbers.  For example, a 10,000 digit multiplication takes approximaly 99,282,205 fewer single precision multiplications with
-Toom--Cook than a Comba or baseline approach (this is a savings of more than 99$\%$).  For most ``crypto'' sized numbers this
-algorithm is not practical as Karatsuba has a much lower cutoff point.
-
-First we split $a$ and $b$ into three roughly equal portions.  This has been accomplished (lines 40 to 69) with 
-combinations of mp\_rshd() and mp\_mod\_2d() function calls.  At this point $a = a2 \cdot \beta^2 + a1 \cdot \beta + a0$ and similiarly
-for $b$.  
-
-Next we compute the five points $w0, w1, w2, w3$ and $w4$.  Recall that $w0$ and $w4$ can be computed directly from the portions so
-we get those out of the way first (lines 72 and 77).  Next we compute $w1, w2$ and $w3$ using Horners method.
-
-After this point we solve for the actual values of $w1, w2$ and $w3$ by reducing the $5 \times 5$ system which is relatively
-straight forward.  
-
-\subsection{Signed Multiplication}
-Now that algorithms to handle multiplications of every useful dimensions have been developed, a rather simple finishing touch is required.  So far all
-of the multiplication algorithms have been unsigned multiplications which leaves only a signed multiplication algorithm to be established.  
-
-\begin{figure}[!here]
-\begin{small}
-\begin{center}
-\begin{tabular}{l}
-\hline Algorithm \textbf{mp\_mul}. \\
-\textbf{Input}.   mp\_int $a$ and mp\_int $b$ \\
-\textbf{Output}.  $c \leftarrow a \cdot b$ \\
-\hline \\
-1.  If $a.sign = b.sign$ then \\
-\hspace{3mm}1.1  $sign = MP\_ZPOS$ \\
-2.  else \\
-\hspace{3mm}2.1  $sign = MP\_ZNEG$ \\
-3.  If min$(a.used, b.used) \ge TOOM\_MUL\_CUTOFF$ then  \\
-\hspace{3mm}3.1  $c \leftarrow a \cdot b$ using algorithm mp\_toom\_mul \\
-4.  else if min$(a.used, b.used) \ge KARATSUBA\_MUL\_CUTOFF$ then \\
-\hspace{3mm}4.1  $c \leftarrow a \cdot b$ using algorithm mp\_karatsuba\_mul \\
-5.  else \\
-\hspace{3mm}5.1  $digs \leftarrow a.used + b.used + 1$ \\
-\hspace{3mm}5.2  If $digs < MP\_ARRAY$ and min$(a.used, b.used) \le \delta$ then \\
-\hspace{6mm}5.2.1  $c \leftarrow a \cdot b \mbox{ (mod }\beta^{digs}\mbox{)}$ using algorithm fast\_s\_mp\_mul\_digs.  \\
-\hspace{3mm}5.3  else \\
-\hspace{6mm}5.3.1  $c \leftarrow a \cdot b \mbox{ (mod }\beta^{digs}\mbox{)}$ using algorithm s\_mp\_mul\_digs.  \\
-6.  $c.sign \leftarrow sign$ \\
-7.  Return the result of the unsigned multiplication performed. \\
-\hline
-\end{tabular}
-\end{center}
-\end{small}
-\caption{Algorithm mp\_mul}
-\end{figure}
-
-\textbf{Algorithm mp\_mul.}
-This algorithm performs the signed multiplication of two inputs.  It will make use of any of the three unsigned multiplication algorithms 
-available when the input is of appropriate size.  The \textbf{sign} of the result is not set until the end of the algorithm since algorithm
-s\_mp\_mul\_digs will clear it.  
-
-\vspace{+3mm}\begin{small}
-\hspace{-5.1mm}{\bf File}: bn\_mp\_mul.c
-\vspace{-3mm}
-\begin{alltt}
-016   
-017   /* high level multiplication (handles sign) */
-018   int mp_mul (mp_int * a, mp_int * b, mp_int * c)
-019   \{
-020     int     res, neg;
-021     neg = (a->sign == b->sign) ? MP_ZPOS : MP_NEG;
-022   
-023     /* use Toom-Cook? */
-024   #ifdef BN_MP_TOOM_MUL_C
-025     if (MIN (a->used, b->used) >= TOOM_MUL_CUTOFF) \{
-026       res = mp_toom_mul(a, b, c);
-027     \} else 
-028   #endif
-029   #ifdef BN_MP_KARATSUBA_MUL_C
-030     /* use Karatsuba? */
-031     if (MIN (a->used, b->used) >= KARATSUBA_MUL_CUTOFF) \{
-032       res = mp_karatsuba_mul (a, b, c);
-033     \} else 
-034   #endif
-035     \{
-036       /* can we use the fast multiplier?
-037        *
-038        * The fast multiplier can be used if the output will 
-039        * have less than MP_WARRAY digits and the number of 
-040        * digits won't affect carry propagation
-041        */
-042       int     digs = a->used + b->used + 1;
-043   
-044   #ifdef BN_FAST_S_MP_MUL_DIGS_C
-045       if ((digs < MP_WARRAY) &&
-046           MIN(a->used, b->used) <= 
-047           (1 << ((CHAR_BIT * sizeof (mp_word)) - (2 * DIGIT_BIT)))) \{
-048         res = fast_s_mp_mul_digs (a, b, c, digs);
-049       \} else 
-050   #endif
-051   #ifdef BN_S_MP_MUL_DIGS_C
-052         res = s_mp_mul (a, b, c); /* uses s_mp_mul_digs */
-053   #else
-054         res = MP_VAL;
-055   #endif
-056   
-057     \}
-058     c->sign = (c->used > 0) ? neg : MP_ZPOS;
-059     return res;
-060   \}
-061   #endif
-\end{alltt}
-\end{small}
-
-The implementation is rather simplistic and is not particularly noteworthy.  Line 23 computes the sign of the result using the ``?'' 
-operator from the C programming language.  Line 47 computes $\delta$ using the fact that $1 << k$ is equal to $2^k$.  
-
-\section{Squaring}
-\label{sec:basesquare}
-
-Squaring is a special case of multiplication where both multiplicands are equal.  At first it may seem like there is no significant optimization
-available but in fact there is.  Consider the multiplication of $576$ against $241$.  In total there will be nine single precision multiplications
-performed which are $1\cdot 6$, $1 \cdot 7$, $1 \cdot 5$, $4 \cdot 6$, $4 \cdot 7$, $4 \cdot 5$, $2 \cdot  6$, $2 \cdot 7$ and $2 \cdot 5$.  Now consider 
-the multiplication of $123$ against $123$.  The nine products are $3 \cdot 3$, $3 \cdot 2$, $3 \cdot 1$, $2 \cdot 3$, $2 \cdot 2$, $2 \cdot 1$, 
-$1 \cdot 3$, $1 \cdot 2$ and $1 \cdot 1$.  On closer inspection some of the products are equivalent.  For example, $3 \cdot 2 = 2 \cdot 3$ 
-and $3 \cdot 1 = 1 \cdot 3$. 
-
-For any $n$-digit input, there are ${{\left (n^2 + n \right)}\over 2}$ possible unique single precision multiplications required compared to the $n^2$
-required for multiplication.  The following diagram gives an example of the operations required.
-
-\begin{figure}[here]
-\begin{center}
-\begin{tabular}{ccccc|c}
-&&1&2&3&\\
-$\times$ &&1&2&3&\\
-\hline && $3 \cdot 1$ & $3 \cdot 2$ & $3 \cdot 3$ & Row 0\\
-       & $2 \cdot 1$  & $2 \cdot 2$ & $2 \cdot 3$ && Row 1 \\
-         $1 \cdot 1$  & $1 \cdot 2$ & $1 \cdot 3$ &&& Row 2 \\
-\end{tabular}
-\end{center}
-\caption{Squaring Optimization Diagram}
-\end{figure}
-
-Starting from zero and numbering the columns from right to left a very simple pattern becomes obvious.  For the purposes of this discussion let $x$
-represent the number being squared.  The first observation is that in row $k$ the $2k$'th column of the product has a $\left (x_k \right)^2$ term in it.  
-
-The second observation is that every column $j$ in row $k$ where $j \ne 2k$ is part of a double product.  Every non-square term of a column will
-appear twice hence the name ``double product''.  Every odd column is made up entirely of double products.  In fact every column is made up of double 
-products and at most one square (\textit{see the exercise section}).  
-
-The third and final observation is that for row $k$ the first unique non-square term, that is, one that hasn't already appeared in an earlier row, 
-occurs at column $2k + 1$.  For example, on row $1$ of the previous squaring, column one is part of the double product with column one from row zero. 
-Column two of row one is a square and column three is the first unique column.
-
-\subsection{The Baseline Squaring Algorithm}
-The baseline squaring algorithm is meant to be a catch-all squaring algorithm.  It will handle any of the input sizes that the faster routines
-will not handle.  
-
-\begin{figure}[!here]
-\begin{small}
-\begin{center}
-\begin{tabular}{l}
-\hline Algorithm \textbf{s\_mp\_sqr}. \\
-\textbf{Input}.   mp\_int $a$ \\
-\textbf{Output}.  $b \leftarrow a^2$ \\
-\hline \\
-1.  Init a temporary mp\_int of at least $2 \cdot a.used +1$ digits.  (\textit{mp\_init\_size}) \\
-2.  If step 1 failed return(\textit{MP\_MEM}) \\
-3.  $t.used \leftarrow 2 \cdot a.used + 1$ \\
-4.  For $ix$ from 0 to $a.used - 1$ do \\
-\hspace{3mm}Calculate the square. \\
-\hspace{3mm}4.1  $\hat r \leftarrow t_{2ix} + \left (a_{ix} \right )^2$ \\
-\hspace{3mm}4.2  $t_{2ix} \leftarrow \hat r \mbox{ (mod }\beta\mbox{)}$ \\
-\hspace{3mm}Calculate the double products after the square. \\
-\hspace{3mm}4.3  $u \leftarrow \lfloor \hat r / \beta \rfloor$ \\
-\hspace{3mm}4.4  For $iy$ from $ix + 1$ to $a.used - 1$ do \\
-\hspace{6mm}4.4.1  $\hat r \leftarrow 2 \cdot a_{ix}a_{iy} + t_{ix + iy} + u$ \\
-\hspace{6mm}4.4.2  $t_{ix + iy} \leftarrow \hat r \mbox{ (mod }\beta\mbox{)}$ \\
-\hspace{6mm}4.4.3  $u \leftarrow \lfloor \hat r / \beta \rfloor$ \\
-\hspace{3mm}Set the last carry. \\
-\hspace{3mm}4.5  While $u > 0$ do \\
-\hspace{6mm}4.5.1  $iy \leftarrow iy + 1$ \\
-\hspace{6mm}4.5.2  $\hat r \leftarrow t_{ix + iy} + u$ \\
-\hspace{6mm}4.5.3  $t_{ix + iy} \leftarrow \hat r \mbox{ (mod }\beta\mbox{)}$ \\
-\hspace{6mm}4.5.4  $u \leftarrow \lfloor \hat r / \beta \rfloor$ \\
-5.  Clamp excess digits of $t$.  (\textit{mp\_clamp}) \\
-6.  Exchange $b$ and $t$. \\
-7.  Clear $t$ (\textit{mp\_clear}) \\
-8.  Return(\textit{MP\_OKAY}) \\
-\hline
-\end{tabular}
-\end{center}
-\end{small}
-\caption{Algorithm s\_mp\_sqr}
-\end{figure}
-
-\textbf{Algorithm s\_mp\_sqr.}
-This algorithm computes the square of an input using the three observations on squaring.  It is based fairly faithfully on  algorithm 14.16 of HAC
-\cite[pp.596-597]{HAC}.  Similar to algorithm s\_mp\_mul\_digs, a temporary mp\_int is allocated to hold the result of the squaring.  This allows the 
-destination mp\_int to be the same as the source mp\_int.
-
-The outer loop of this algorithm begins on step 4. It is best to think of the outer loop as walking down the rows of the partial results, while
-the inner loop computes the columns of the partial result.  Step 4.1 and 4.2 compute the square term for each row, and step 4.3 and 4.4 propagate
-the carry and compute the double products.  
-
-The requirement that a mp\_word be able to represent the range $0 \le x < 2 \beta^2$ arises from this
-very algorithm.  The product $a_{ix}a_{iy}$ will lie in the range $0 \le x \le \beta^2 - 2\beta + 1$ which is obviously less than $\beta^2$ meaning that
-when it is multiplied by two, it can be properly represented by a mp\_word.
-
-Similar to algorithm s\_mp\_mul\_digs, after every pass of the inner loop, the destination is correctly set to the sum of all of the partial 
-results calculated so far.  This involves expensive carry propagation which will be eliminated in the next algorithm.  
-
-\vspace{+3mm}\begin{small}
-\hspace{-5.1mm}{\bf File}: bn\_s\_mp\_sqr.c
-\vspace{-3mm}
-\begin{alltt}
-016   
-017   /* low level squaring, b = a*a, HAC pp.596-597, Algorithm 14.16 */
-018   int s_mp_sqr (mp_int * a, mp_int * b)
-019   \{
-020     mp_int  t;
-021     int     res, ix, iy, pa;
-022     mp_word r;
-023     mp_digit u, tmpx, *tmpt;
-024   
-025     pa = a->used;
-026     if ((res = mp_init_size (&t, 2*pa + 1)) != MP_OKAY) \{
-027       return res;
-028     \}
-029   
-030     /* default used is maximum possible size */
-031     t.used = 2*pa + 1;
-032   
-033     for (ix = 0; ix < pa; ix++) \{
-034       /* first calculate the digit at 2*ix */
-035       /* calculate double precision result */
-036       r = ((mp_word) t.dp[2*ix]) +
-037           ((mp_word)a->dp[ix])*((mp_word)a->dp[ix]);
-038   
-039       /* store lower part in result */
-040       t.dp[ix+ix] = (mp_digit) (r & ((mp_word) MP_MASK));
-041   
-042       /* get the carry */
-043       u           = (mp_digit)(r >> ((mp_word) DIGIT_BIT));
-044   
-045       /* left hand side of A[ix] * A[iy] */
-046       tmpx        = a->dp[ix];
-047   
-048       /* alias for where to store the results */
-049       tmpt        = t.dp + (2*ix + 1);
-050       
-051       for (iy = ix + 1; iy < pa; iy++) \{
-052         /* first calculate the product */
-053         r       = ((mp_word)tmpx) * ((mp_word)a->dp[iy]);
-054   
-055         /* now calculate the double precision result, note we use
-056          * addition instead of *2 since it's easier to optimize
-057          */
-058         r       = ((mp_word) *tmpt) + r + r + ((mp_word) u);
-059   
-060         /* store lower part */
-061         *tmpt++ = (mp_digit) (r & ((mp_word) MP_MASK));
-062   
-063         /* get carry */
-064         u       = (mp_digit)(r >> ((mp_word) DIGIT_BIT));
-065       \}
-066       /* propagate upwards */
-067       while (u != ((mp_digit) 0)) \{
-068         r       = ((mp_word) *tmpt) + ((mp_word) u);
-069         *tmpt++ = (mp_digit) (r & ((mp_word) MP_MASK));
-070         u       = (mp_digit)(r >> ((mp_word) DIGIT_BIT));
-071       \}
-072     \}
-073   
-074     mp_clamp (&t);
-075     mp_exch (&t, b);
-076     mp_clear (&t);
-077     return MP_OKAY;
-078   \}
-079   #endif
-\end{alltt}
-\end{small}
-
-Inside the outer loop (line 33) the square term is calculated on line 36.  The carry (line 43) has been
-extracted from the mp\_word accumulator using a right shift.  Aliases for $a_{ix}$ and $t_{ix+iy}$ are initialized 
-(lines 46 and 49) to simplify the inner loop.  The doubling is performed using two
-additions (line 58) since it is usually faster than shifting, if not at least as fast.  
-
-The important observation is that the inner loop does not begin at $iy = 0$ like for multiplication.  As such the inner loops
-get progressively shorter as the algorithm proceeds.  This is what leads to the savings compared to using a multiplication to
-square a number. 
-
-\subsection{Faster Squaring by the ``Comba'' Method}
-A major drawback to the baseline method is the requirement for single precision shifting inside the $O(n^2)$ nested loop.  Squaring has an additional
-drawback that it must double the product inside the inner loop as well.  As for multiplication, the Comba technique can be used to eliminate these
-performance hazards.
-
-The first obvious solution is to make an array of mp\_words which will hold all of the columns.  This will indeed eliminate all of the carry
-propagation operations from the inner loop.  However, the inner product must still be doubled $O(n^2)$ times.  The solution stems from the simple fact
-that $2a + 2b + 2c = 2(a + b + c)$.  That is the sum of all of the double products is equal to double the sum of all the products.  For example,
-$ab + ba + ac + ca = 2ab + 2ac = 2(ab + ac)$.  
-
-However, we cannot simply double all of the columns, since the squares appear only once per row.  The most practical solution is to have two 
-mp\_word arrays.  One array will hold the squares and the other array will hold the double products.  With both arrays the doubling and 
-carry propagation can be moved to a $O(n)$ work level outside the $O(n^2)$ level.  In this case, we have an even simpler solution in mind.
-
-\newpage\begin{figure}[!here]
-\begin{small}
-\begin{center}
-\begin{tabular}{l}
-\hline Algorithm \textbf{fast\_s\_mp\_sqr}. \\
-\textbf{Input}.   mp\_int $a$ \\
-\textbf{Output}.  $b \leftarrow a^2$ \\
-\hline \\
-Place an array of \textbf{MP\_WARRAY} mp\_digits named $W$ on the stack. \\
-1.  If $b.alloc < 2a.used + 1$ then grow $b$ to $2a.used + 1$ digits.  (\textit{mp\_grow}). \\
-2.  If step 1 failed return(\textit{MP\_MEM}). \\
-\\
-3.  $pa \leftarrow 2 \cdot a.used$ \\
-4.  $\hat W1 \leftarrow 0$ \\
-5.  for $ix$ from $0$ to $pa - 1$ do \\
-\hspace{3mm}5.1  $\_ \hat W \leftarrow 0$ \\
-\hspace{3mm}5.2  $ty \leftarrow \mbox{MIN}(a.used - 1, ix)$ \\
-\hspace{3mm}5.3  $tx \leftarrow ix - ty$ \\
-\hspace{3mm}5.4  $iy \leftarrow \mbox{MIN}(a.used - tx, ty + 1)$ \\
-\hspace{3mm}5.5  $iy \leftarrow \mbox{MIN}(iy, \lfloor \left (ty - tx + 1 \right )/2 \rfloor)$ \\
-\hspace{3mm}5.6  for $iz$ from $0$ to $iz - 1$ do \\
-\hspace{6mm}5.6.1  $\_ \hat W \leftarrow \_ \hat W + a_{tx + iz}a_{ty - iz}$ \\
-\hspace{3mm}5.7  $\_ \hat W \leftarrow 2 \cdot \_ \hat W  + \hat W1$ \\
-\hspace{3mm}5.8  if $ix$ is even then \\
-\hspace{6mm}5.8.1  $\_ \hat W \leftarrow \_ \hat W + \left ( a_{\lfloor ix/2 \rfloor}\right )^2$ \\
-\hspace{3mm}5.9  $W_{ix} \leftarrow \_ \hat W (\mbox{mod }\beta)$ \\
-\hspace{3mm}5.10  $\hat W1 \leftarrow \lfloor \_ \hat W / \beta \rfloor$ \\
-\\
-6.  $oldused \leftarrow b.used$ \\
-7.  $b.used \leftarrow 2 \cdot a.used$ \\
-8.  for $ix$ from $0$ to $pa - 1$ do \\
-\hspace{3mm}8.1  $b_{ix} \leftarrow W_{ix}$ \\
-9.  for $ix$ from $pa$ to $oldused - 1$ do \\
-\hspace{3mm}9.1  $b_{ix} \leftarrow 0$ \\
-10.  Clamp excess digits from $b$.  (\textit{mp\_clamp}) \\
-11.  Return(\textit{MP\_OKAY}). \\ 
-\hline
-\end{tabular}
-\end{center}
-\end{small}
-\caption{Algorithm fast\_s\_mp\_sqr}
-\end{figure}
-
-\textbf{Algorithm fast\_s\_mp\_sqr.}
-This algorithm computes the square of an input using the Comba technique.  It is designed to be a replacement for algorithm 
-s\_mp\_sqr when the number of input digits is less than \textbf{MP\_WARRAY} and less than $\delta \over 2$.  
-This algorithm is very similar to the Comba multiplier except with a few key differences we shall make note of.
-
-First, we have an accumulator and carry variables $\_ \hat W$ and $\hat W1$ respectively.  This is because the inner loop
-products are to be doubled.  If we had added the previous carry in we would be doubling too much.  Next we perform an
-addition MIN condition on $iy$ (step 5.5) to prevent overlapping digits.  For example, $a_3 \cdot a_5$ is equal
-$a_5 \cdot a_3$.  Whereas in the multiplication case we would have $5 < a.used$ and $3 \ge 0$ is maintained since we double the sum
-of the products just outside the inner loop we have to avoid doing this.  This is also a good thing since we perform
-fewer multiplications and the routine ends up being faster.
-
-Finally the last difference is the addition of the ``square'' term outside the inner loop (step 5.8).  We add in the square
-only to even outputs and it is the square of the term at the $\lfloor ix / 2 \rfloor$ position.
-
-\vspace{+3mm}\begin{small}
-\hspace{-5.1mm}{\bf File}: bn\_fast\_s\_mp\_sqr.c
-\vspace{-3mm}
-\begin{alltt}
-016   
-017   /* the jist of squaring...
-018    * you do like mult except the offset of the tmpx [one that 
-019    * starts closer to zero] can't equal the offset of tmpy.  
-020    * So basically you set up iy like before then you min it with
-021    * (ty-tx) so that it never happens.  You double all those 
-022    * you add in the inner loop
-023   
-024   After that loop you do the squares and add them in.
-025   */
-026   
-027   int fast_s_mp_sqr (mp_int * a, mp_int * b)
-028   \{
-029     int       olduse, res, pa, ix, iz;
-030     mp_digit   W[MP_WARRAY], *tmpx;
-031     mp_word   W1;
-032   
-033     /* grow the destination as required */
-034     pa = a->used + a->used;
-035     if (b->alloc < pa) \{
-036       if ((res = mp_grow (b, pa)) != MP_OKAY) \{
-037         return res;
-038       \}
-039     \}
-040   
-041     /* number of output digits to produce */
-042     W1 = 0;
-043     for (ix = 0; ix < pa; ix++) \{ 
-044         int      tx, ty, iy;
-045         mp_word  _W;
-046         mp_digit *tmpy;
-047   
-048         /* clear counter */
-049         _W = 0;
-050   
-051         /* get offsets into the two bignums */
-052         ty = MIN(a->used-1, ix);
-053         tx = ix - ty;
-054   
-055         /* setup temp aliases */
-056         tmpx = a->dp + tx;
-057         tmpy = a->dp + ty;
-058   
-059         /* this is the number of times the loop will iterrate, essentially
-060            while (tx++ < a->used && ty-- >= 0) \{ ... \}
-061          */
-062         iy = MIN(a->used-tx, ty+1);
-063   
-064         /* now for squaring tx can never equal ty 
-065          * we halve the distance since they approach at a rate of 2x
-066          * and we have to round because odd cases need to be executed
-067          */
-068         iy = MIN(iy, (ty-tx+1)>>1);
-069   
-070         /* execute loop */
-071         for (iz = 0; iz < iy; iz++) \{
-072            _W += ((mp_word)*tmpx++)*((mp_word)*tmpy--);
-073         \}
-074   
-075         /* double the inner product and add carry */
-076         _W = _W + _W + W1;
-077   
-078         /* even columns have the square term in them */
-079         if ((ix&1) == 0) \{
-080            _W += ((mp_word)a->dp[ix>>1])*((mp_word)a->dp[ix>>1]);
-081         \}
-082   
-083         /* store it */
-084         W[ix] = (mp_digit)(_W & MP_MASK);
-085   
-086         /* make next carry */
-087         W1 = _W >> ((mp_word)DIGIT_BIT);
-088     \}
-089   
-090     /* setup dest */
-091     olduse  = b->used;
-092     b->used = a->used+a->used;
-093   
-094     \{
-095       mp_digit *tmpb;
-096       tmpb = b->dp;
-097       for (ix = 0; ix < pa; ix++) \{
-098         *tmpb++ = W[ix] & MP_MASK;
-099       \}
-100   
-101       /* clear unused digits [that existed in the old copy of c] */
-102       for (; ix < olduse; ix++) \{
-103         *tmpb++ = 0;
-104       \}
-105     \}
-106     mp_clamp (b);
-107     return MP_OKAY;
-108   \}
-109   #endif
-\end{alltt}
-\end{small}
-
-This implementation is essentially a copy of Comba multiplication with the appropriate changes added to make it faster for 
-the special case of squaring.  
-
-\subsection{Polynomial Basis Squaring}
-The same algorithm that performs optimal polynomial basis multiplication can be used to perform polynomial basis squaring.  The minor exception
-is that $\zeta_y = f(y)g(y)$ is actually equivalent to $\zeta_y = f(y)^2$ since $f(y) = g(y)$.  Instead of performing $2n + 1$
-multiplications to find the $\zeta$ relations, squaring operations are performed instead.  
-
-\subsection{Karatsuba Squaring}
-Let $f(x) = ax + b$ represent the polynomial basis representation of a number to square.  
-Let $h(x) = \left ( f(x) \right )^2$ represent the square of the polynomial.  The Karatsuba equation can be modified to square a 
-number with the following equation.
-
-\begin{equation}
-h(x) = a^2x^2 + \left (a^2 + b^2 - (a - b)^2 \right )x + b^2
-\end{equation}
-
-Upon closer inspection this equation only requires the calculation of three half-sized squares: $a^2$, $b^2$ and $(a - b)^2$.  As in 
-Karatsuba multiplication, this algorithm can be applied recursively on the input and will achieve an asymptotic running time of 
-$O \left ( n^{lg(3)} \right )$.
-
-If the asymptotic times of Karatsuba squaring and multiplication are the same, why not simply use the multiplication algorithm 
-instead?  The answer to this arises from the cutoff point for squaring.  As in multiplication there exists a cutoff point, at which the 
-time required for a Comba based squaring and a Karatsuba based squaring meet.  Due to the overhead inherent in the Karatsuba method, the cutoff 
-point is fairly high.  For example, on an AMD Athlon XP processor with $\beta = 2^{28}$, the cutoff point is around 127 digits.  
-
-Consider squaring a 200 digit number with this technique.  It will be split into two 100 digit halves which are subsequently squared.  
-The 100 digit halves will not be squared using Karatsuba, but instead using the faster Comba based squaring algorithm.  If Karatsuba multiplication
-were used instead, the 100 digit numbers would be squared with a slower Comba based multiplication.  
-
-\newpage\begin{figure}[!here]
-\begin{small}
-\begin{center}
-\begin{tabular}{l}
-\hline Algorithm \textbf{mp\_karatsuba\_sqr}. \\
-\textbf{Input}.   mp\_int $a$ \\
-\textbf{Output}.  $b \leftarrow a^2$ \\
-\hline \\
-1.  Initialize the following temporary mp\_ints:  $x0$, $x1$, $t1$, $t2$, $x0x0$ and $x1x1$. \\
-2.  If any of the initializations on step 1 failed return(\textit{MP\_MEM}). \\
-\\
-Split the input.  e.g. $a = x1\beta^B + x0$ \\
-3.  $B \leftarrow \lfloor a.used / 2 \rfloor$ \\
-4.  $x0 \leftarrow a \mbox{ (mod }\beta^B\mbox{)}$ (\textit{mp\_mod\_2d}) \\
-5.  $x1 \leftarrow \lfloor a / \beta^B \rfloor$ (\textit{mp\_lshd}) \\
-\\
-Calculate the three squares. \\
-6.  $x0x0 \leftarrow x0^2$ (\textit{mp\_sqr}) \\
-7.  $x1x1 \leftarrow x1^2$ \\
-8.  $t1 \leftarrow x1 - x0$ (\textit{mp\_sub}) \\
-9.  $t1 \leftarrow t1^2$ \\
-\\
-Compute the middle term. \\
-10.  $t2 \leftarrow x0x0 + x1x1$ (\textit{s\_mp\_add}) \\
-11.  $t1 \leftarrow t2 - t1$ \\
-\\
-Compute final product. \\
-12.  $t1 \leftarrow t1\beta^B$ (\textit{mp\_lshd}) \\
-13.  $x1x1 \leftarrow x1x1\beta^{2B}$ \\
-14.  $t1 \leftarrow t1 + x0x0$ \\
-15.  $b \leftarrow t1 + x1x1$ \\
-16.  Return(\textit{MP\_OKAY}). \\
-\hline
-\end{tabular}
-\end{center}
-\end{small}
-\caption{Algorithm mp\_karatsuba\_sqr}
-\end{figure}
-
-\textbf{Algorithm mp\_karatsuba\_sqr.}
-This algorithm computes the square of an input $a$ using the Karatsuba technique.  This algorithm is very similar to the Karatsuba based
-multiplication algorithm with the exception that the three half-size multiplications have been replaced with three half-size squarings.
-
-The radix point for squaring is simply placed exactly in the middle of the digits when the input has an odd number of digits, otherwise it is
-placed just below the middle.  Step 3, 4 and 5 compute the two halves required using $B$
-as the radix point.  The first two squares in steps 6 and 7 are rather straightforward while the last square is of a more compact form.
-
-By expanding $\left (x1 - x0 \right )^2$, the $x1^2$ and $x0^2$ terms in the middle disappear, that is $x1^2 + x0^2 - (x1 - x0)^2 = 2 \cdot x0 \cdot x1$.
-Now if $5n$ single precision additions and a squaring of $n$-digits is faster than multiplying two $n$-digit numbers and doubling then
-this method is faster.  Assuming no further recursions occur, the difference can be estimated with the following inequality.
-
-Let $p$ represent the cost of a single precision addition and $q$ the cost of a single precision multiplication both in terms of time\footnote{Or
-machine clock cycles.}. 
-
-\begin{equation}
-5pn +{{q(n^2 + n)} \over 2} \le pn + qn^2
-\end{equation}
-
-For example, on an AMD Athlon XP processor $p = {1 \over 3}$ and $q = 6$.  This implies that the following inequality should hold.
-\begin{center}
-\begin{tabular}{rcl}
-${5n \over 3} + 3n^2 + 3n$     & $<$ & ${n \over 3} + 6n^2$ \\
-${5 \over 3} + 3n + 3$     & $<$ & ${1 \over 3} + 6n$ \\
-${13 \over 9}$     & $<$ & $n$ \\
-\end{tabular}
-\end{center}
-
-This results in a cutoff point around $n = 2$.  As a consequence it is actually faster to compute the middle term the ``long way'' on processors
-where multiplication is substantially slower\footnote{On the Athlon there is a 1:17 ratio between clock cycles for addition and multiplication.  On
-the Intel P4 processor this ratio is 1:29 making this method even more beneficial.  The only common exception is the ARMv4 processor which has a
-ratio of 1:7.  } than simpler operations such as addition.  
-
-\vspace{+3mm}\begin{small}
-\hspace{-5.1mm}{\bf File}: bn\_mp\_karatsuba\_sqr.c
-\vspace{-3mm}
-\begin{alltt}
-016   
-017   /* Karatsuba squaring, computes b = a*a using three 
-018    * half size squarings
-019    *
-020    * See comments of karatsuba_mul for details.  It 
-021    * is essentially the same algorithm but merely 
-022    * tuned to perform recursive squarings.
-023    */
-024   int mp_karatsuba_sqr (mp_int * a, mp_int * b)
-025   \{
-026     mp_int  x0, x1, t1, t2, x0x0, x1x1;
-027     int     B, err;
-028   
-029     err = MP_MEM;
-030   
-031     /* min # of digits */
-032     B = a->used;
-033   
-034     /* now divide in two */
-035     B = B >> 1;
-036   
-037     /* init copy all the temps */
-038     if (mp_init_size (&x0, B) != MP_OKAY)
-039       goto ERR;
-040     if (mp_init_size (&x1, a->used - B) != MP_OKAY)
-041       goto X0;
-042   
-043     /* init temps */
-044     if (mp_init_size (&t1, a->used * 2) != MP_OKAY)
-045       goto X1;
-046     if (mp_init_size (&t2, a->used * 2) != MP_OKAY)
-047       goto T1;
-048     if (mp_init_size (&x0x0, B * 2) != MP_OKAY)
-049       goto T2;
-050     if (mp_init_size (&x1x1, (a->used - B) * 2) != MP_OKAY)
-051       goto X0X0;
-052   
-053     \{
-054       register int x;
-055       register mp_digit *dst, *src;
-056   
-057       src = a->dp;
-058   
-059       /* now shift the digits */
-060       dst = x0.dp;
-061       for (x = 0; x < B; x++) \{
-062         *dst++ = *src++;
-063       \}
-064   
-065       dst = x1.dp;
-066       for (x = B; x < a->used; x++) \{
-067         *dst++ = *src++;
-068       \}
-069     \}
-070   
-071     x0.used = B;
-072     x1.used = a->used - B;
-073   
-074     mp_clamp (&x0);
-075   
-076     /* now calc the products x0*x0 and x1*x1 */
-077     if (mp_sqr (&x0, &x0x0) != MP_OKAY)
-078       goto X1X1;           /* x0x0 = x0*x0 */
-079     if (mp_sqr (&x1, &x1x1) != MP_OKAY)
-080       goto X1X1;           /* x1x1 = x1*x1 */
-081   
-082     /* now calc (x1-x0)**2 */
-083     if (mp_sub (&x1, &x0, &t1) != MP_OKAY)
-084       goto X1X1;           /* t1 = x1 - x0 */
-085     if (mp_sqr (&t1, &t1) != MP_OKAY)
-086       goto X1X1;           /* t1 = (x1 - x0) * (x1 - x0) */
-087   
-088     /* add x0y0 */
-089     if (s_mp_add (&x0x0, &x1x1, &t2) != MP_OKAY)
-090       goto X1X1;           /* t2 = x0x0 + x1x1 */
-091     if (mp_sub (&t2, &t1, &t1) != MP_OKAY)
-092       goto X1X1;           /* t1 = x0x0 + x1x1 - (x1-x0)*(x1-x0) */
-093   
-094     /* shift by B */
-095     if (mp_lshd (&t1, B) != MP_OKAY)
-096       goto X1X1;           /* t1 = (x0x0 + x1x1 - (x1-x0)*(x1-x0))<<B */
-097     if (mp_lshd (&x1x1, B * 2) != MP_OKAY)
-098       goto X1X1;           /* x1x1 = x1x1 << 2*B */
-099   
-100     if (mp_add (&x0x0, &t1, &t1) != MP_OKAY)
-101       goto X1X1;           /* t1 = x0x0 + t1 */
-102     if (mp_add (&t1, &x1x1, b) != MP_OKAY)
-103       goto X1X1;           /* t1 = x0x0 + t1 + x1x1 */
-104   
-105     err = MP_OKAY;
-106   
-107   X1X1:mp_clear (&x1x1);
-108   X0X0:mp_clear (&x0x0);
-109   T2:mp_clear (&t2);
-110   T1:mp_clear (&t1);
-111   X1:mp_clear (&x1);
-112   X0:mp_clear (&x0);
-113   ERR:
-114     return err;
-115   \}
-116   #endif
-\end{alltt}
-\end{small}
-
-This implementation is largely based on the implementation of algorithm mp\_karatsuba\_mul.  It uses the same inline style to copy and 
-shift the input into the two halves.  The loop from line 53 to line 69 has been modified since only one input exists.  The \textbf{used}
-count of both $x0$ and $x1$ is fixed up and $x0$ is clamped before the calculations begin.  At this point $x1$ and $x0$ are valid equivalents
-to the respective halves as if mp\_rshd and mp\_mod\_2d had been used.  
-
-By inlining the copy and shift operations the cutoff point for Karatsuba multiplication can be lowered.  On the Athlon the cutoff point
-is exactly at the point where Comba squaring can no longer be used (\textit{128 digits}).  On slower processors such as the Intel P4
-it is actually below the Comba limit (\textit{at 110 digits}).
-
-This routine uses the same error trap coding style as mp\_karatsuba\_sqr.  As the temporary variables are initialized errors are 
-redirected to the error trap higher up.  If the algorithm completes without error the error code is set to \textbf{MP\_OKAY} and 
-mp\_clears are executed normally.
-
-\subsection{Toom-Cook Squaring}
-The Toom-Cook squaring algorithm mp\_toom\_sqr is heavily based on the algorithm mp\_toom\_mul with the exception that squarings are used
-instead of multiplication to find the five relations.  The reader is encouraged to read the description of the latter algorithm and try to 
-derive their own Toom-Cook squaring algorithm.  
-
-\subsection{High Level Squaring}
-\newpage\begin{figure}[!here]
-\begin{small}
-\begin{center}
-\begin{tabular}{l}
-\hline Algorithm \textbf{mp\_sqr}. \\
-\textbf{Input}.   mp\_int $a$ \\
-\textbf{Output}.  $b \leftarrow a^2$ \\
-\hline \\
-1.  If $a.used \ge TOOM\_SQR\_CUTOFF$ then  \\
-\hspace{3mm}1.1  $b \leftarrow a^2$ using algorithm mp\_toom\_sqr \\
-2.  else if $a.used \ge KARATSUBA\_SQR\_CUTOFF$ then \\
-\hspace{3mm}2.1  $b \leftarrow a^2$ using algorithm mp\_karatsuba\_sqr \\
-3.  else \\
-\hspace{3mm}3.1  $digs \leftarrow a.used + b.used + 1$ \\
-\hspace{3mm}3.2  If $digs < MP\_ARRAY$ and $a.used \le \delta$ then \\
-\hspace{6mm}3.2.1  $b \leftarrow a^2$ using algorithm fast\_s\_mp\_sqr.  \\
-\hspace{3mm}3.3  else \\
-\hspace{6mm}3.3.1  $b \leftarrow a^2$ using algorithm s\_mp\_sqr.  \\
-4.  $b.sign \leftarrow MP\_ZPOS$ \\
-5.  Return the result of the unsigned squaring performed. \\
-\hline
-\end{tabular}
-\end{center}
-\end{small}
-\caption{Algorithm mp\_sqr}
-\end{figure}
-
-\textbf{Algorithm mp\_sqr.}
-This algorithm computes the square of the input using one of four different algorithms.  If the input is very large and has at least
-\textbf{TOOM\_SQR\_CUTOFF} or \textbf{KARATSUBA\_SQR\_CUTOFF} digits then either the Toom-Cook or the Karatsuba Squaring algorithm is used.  If
-neither of the polynomial basis algorithms should be used then either the Comba or baseline algorithm is used.  
-
-\vspace{+3mm}\begin{small}
-\hspace{-5.1mm}{\bf File}: bn\_mp\_sqr.c
-\vspace{-3mm}
-\begin{alltt}
-016   
-017   /* computes b = a*a */
-018   int
-019   mp_sqr (mp_int * a, mp_int * b)
-020   \{
-021     int     res;
-022   
-023   #ifdef BN_MP_TOOM_SQR_C
-024     /* use Toom-Cook? */
-025     if (a->used >= TOOM_SQR_CUTOFF) \{
-026       res = mp_toom_sqr(a, b);
-027     /* Karatsuba? */
-028     \} else 
-029   #endif
-030   #ifdef BN_MP_KARATSUBA_SQR_C
-031   if (a->used >= KARATSUBA_SQR_CUTOFF) \{
-032       res = mp_karatsuba_sqr (a, b);
-033     \} else 
-034   #endif
-035     \{
-036   #ifdef BN_FAST_S_MP_SQR_C
-037       /* can we use the fast comba multiplier? */
-038       if ((a->used * 2 + 1) < MP_WARRAY && 
-039            a->used < 
-040            (1 << (sizeof(mp_word) * CHAR_BIT - 2*DIGIT_BIT - 1))) \{
-041         res = fast_s_mp_sqr (a, b);
-042       \} else
-043   #endif
-044   #ifdef BN_S_MP_SQR_C
-045         res = s_mp_sqr (a, b);
-046   #else
-047         res = MP_VAL;
-048   #endif
-049     \}
-050     b->sign = MP_ZPOS;
-051     return res;
-052   \}
-053   #endif
-\end{alltt}
-\end{small}
-
-\section*{Exercises}
-\begin{tabular}{cl}
-$\left [ 3 \right ] $ & Devise an efficient algorithm for selection of the radix point to handle inputs \\
-                      & that have different number of digits in Karatsuba multiplication. \\
-                      & \\
-$\left [ 2 \right ] $ & In section 5.3 the fact that every column of a squaring is made up \\
-                      & of double products and at most one square is stated.  Prove this statement. \\
-                      & \\                      
-$\left [ 3 \right ] $ & Prove the equation for Karatsuba squaring. \\
-                      & \\
-$\left [ 1 \right ] $ & Prove that Karatsuba squaring requires $O \left (n^{lg(3)} \right )$ time. \\
-                      & \\ 
-$\left [ 2 \right ] $ & Determine the minimal ratio between addition and multiplication clock cycles \\
-                      & required for equation $6.7$ to be true.  \\
-                      & \\
-$\left [ 3 \right ] $ & Implement a threaded version of Comba multiplication (and squaring) where you \\
-                      & compute subsets of the columns in each thread.  Determine a cutoff point where \\
-                      & it is effective and add the logic to mp\_mul() and mp\_sqr(). \\
-                      &\\
-$\left [ 4 \right ] $ & Same as the previous but also modify the Karatsuba and Toom-Cook.  You must \\
-                      & increase the throughput of mp\_exptmod() for random odd moduli in the range \\
-                      & $512 \ldots 4096$ bits significantly ($> 2x$) to complete this challenge. \\
-                      & \\
-\end{tabular}
-
-\chapter{Modular Reduction}
-\section{Basics of Modular Reduction}
-\index{modular residue}
-Modular reduction is an operation that arises quite often within public key cryptography algorithms and various number theoretic algorithms, 
-such as factoring.  Modular reduction algorithms are the third class of algorithms of the ``multipliers'' set.  A number $a$ is said to be \textit{reduced}
-modulo another number $b$ by finding the remainder of the division $a/b$.  Full integer division with remainder is a topic to be covered 
-in~\ref{sec:division}.
-
-Modular reduction is equivalent to solving for $r$ in the following equation.  $a = bq + r$ where $q = \lfloor a/b \rfloor$.  The result 
-$r$ is said to be ``congruent to $a$ modulo $b$'' which is also written as $r \equiv a \mbox{ (mod }b\mbox{)}$.  In other vernacular $r$ is known as the 
-``modular residue'' which leads to ``quadratic residue''\footnote{That's fancy talk for $b \equiv a^2 \mbox{ (mod }p\mbox{)}$.} and
-other forms of residues.  
-
-Modular reductions are normally used to create either finite groups, rings or fields.  The most common usage for performance driven modular reductions 
-is in modular exponentiation algorithms.  That is to compute $d = a^b \mbox{ (mod }c\mbox{)}$ as fast as possible.  This operation is used in the 
-RSA and Diffie-Hellman public key algorithms, for example.  Modular multiplication and squaring also appears as a fundamental operation in 
-elliptic curve cryptographic algorithms.  As will be discussed in the subsequent chapter there exist fast algorithms for computing modular 
-exponentiations without having to perform (\textit{in this example}) $b - 1$ multiplications.  These algorithms will produce partial results in the 
-range $0 \le x < c^2$ which can be taken advantage of to create several efficient algorithms.   They have also been used to create redundancy check 
-algorithms known as CRCs, error correction codes such as Reed-Solomon and solve a variety of number theoeretic problems.  
-
-\section{The Barrett Reduction}
-The Barrett reduction algorithm \cite{BARRETT} was inspired by fast division algorithms which multiply by the reciprocal to emulate
-division.  Barretts observation was that the residue $c$ of $a$ modulo $b$ is equal to 
-
-\begin{equation}
-c = a - b \cdot \lfloor a/b \rfloor
-\end{equation}
-
-Since algorithms such as modular exponentiation would be using the same modulus extensively, typical DSP\footnote{It is worth noting that Barrett's paper 
-targeted the DSP56K processor.}  intuition would indicate the next step would be to replace $a/b$ by a multiplication by the reciprocal.  However, 
-DSP intuition on its own will not work as these numbers are considerably larger than the precision of common DSP floating point data types.  
-It would take another common optimization to optimize the algorithm.
-
-\subsection{Fixed Point Arithmetic}
-The trick used to optimize the above equation is based on a technique of emulating floating point data types with fixed precision integers.  Fixed
-point arithmetic would become very popular as it greatly optimize the ``3d-shooter'' genre of games in the mid 1990s when floating point units were 
-fairly slow if not unavailable.   The idea behind fixed point arithmetic is to take a normal $k$-bit integer data type and break it into $p$-bit 
-integer and a $q$-bit fraction part (\textit{where $p+q = k$}).  
-
-In this system a $k$-bit integer $n$ would actually represent $n/2^q$.  For example, with $q = 4$ the integer $n = 37$ would actually represent the
-value $2.3125$.  To multiply two fixed point numbers the integers are multiplied using traditional arithmetic and subsequently normalized by 
-moving the implied decimal point back to where it should be.  For example, with $q = 4$ to multiply the integers $9$ and $5$ they must be converted 
-to fixed point first by multiplying by $2^q$.  Let $a = 9(2^q)$ represent the fixed point representation of $9$ and $b = 5(2^q)$ represent the 
-fixed point representation of $5$.  The product $ab$ is equal to $45(2^{2q})$ which when normalized by dividing by $2^q$ produces $45(2^q)$.  
-
-This technique became popular since a normal integer multiplication and logical shift right are the only required operations to perform a multiplication
-of two fixed point numbers.  Using fixed point arithmetic, division can be easily approximated by multiplying by the reciprocal.  If $2^q$ is 
-equivalent to one than $2^q/b$ is equivalent to the fixed point approximation of $1/b$ using real arithmetic.  Using this fact dividing an integer 
-$a$ by another integer $b$ can be achieved with the following expression.
-
-\begin{equation}
-\lfloor a / b \rfloor \mbox{ }\approx\mbox{ } \lfloor (a \cdot \lfloor 2^q / b \rfloor)/2^q \rfloor
-\end{equation}
-
-The precision of the division is proportional to the value of $q$.  If the divisor $b$ is used frequently as is the case with 
-modular exponentiation pre-computing $2^q/b$ will allow a division to be performed with a multiplication and a right shift.  Both operations
-are considerably faster than division on most processors.  
-
-Consider dividing $19$ by $5$.  The correct result is $\lfloor 19/5 \rfloor = 3$.  With $q = 3$ the reciprocal is $\lfloor 2^q/5 \rfloor = 1$ which
-leads to a product of $19$ which when divided by $2^q$ produces $2$.  However, with $q = 4$ the reciprocal is $\lfloor 2^q/5 \rfloor = 3$ and
-the result of the emulated division is $\lfloor 3 \cdot 19 / 2^q \rfloor = 3$ which is correct.  The value of $2^q$ must be close to or ideally
-larger than the dividend.  In effect if $a$ is the dividend then $q$ should allow $0 \le \lfloor a/2^q \rfloor \le 1$ in order for this approach
-to work correctly.  Plugging this form of divison into the original equation the following modular residue equation arises.
-
-\begin{equation}
-c = a - b \cdot \lfloor (a \cdot \lfloor 2^q / b \rfloor)/2^q \rfloor
-\end{equation}
-
-Using the notation from \cite{BARRETT} the value of $\lfloor 2^q / b \rfloor$ will be represented by the $\mu$ symbol.  Using the $\mu$
-variable also helps re-inforce the idea that it is meant to be computed once and re-used.
-
-\begin{equation}
-c = a - b \cdot \lfloor (a \cdot \mu)/2^q \rfloor
-\end{equation}
-
-Provided that $2^q \ge a$ this algorithm will produce a quotient that is either exactly correct or off by a value of one.  In the context of Barrett
-reduction the value of $a$ is bound by $0 \le a \le (b - 1)^2$ meaning that $2^q \ge b^2$ is sufficient to ensure the reciprocal will have enough
-precision.  
-
-Let $n$ represent the number of digits in $b$.  This algorithm requires approximately $2n^2$ single precision multiplications to produce the quotient and 
-another $n^2$ single precision multiplications to find the residue.  In total $3n^2$ single precision multiplications are required to 
-reduce the number.  
-
-For example, if $b = 1179677$ and $q = 41$ ($2^q > b^2$), then the reciprocal $\mu$ is equal to $\lfloor 2^q / b \rfloor = 1864089$.  Consider reducing
-$a = 180388626447$ modulo $b$ using the above reduction equation.  The quotient using the new formula is $\lfloor (a \cdot \mu) / 2^q \rfloor = 152913$.
-By subtracting $152913b$ from $a$ the correct residue $a \equiv 677346 \mbox{ (mod }b\mbox{)}$ is found.
-
-\subsection{Choosing a Radix Point}
-Using the fixed point representation a modular reduction can be performed with $3n^2$ single precision multiplications.  If that were the best
-that could be achieved a full division\footnote{A division requires approximately $O(2cn^2)$ single precision multiplications for a small value of $c$.  
-See~\ref{sec:division} for further details.} might as well be used in its place.  The key to optimizing the reduction is to reduce the precision of
-the initial multiplication that finds the quotient.  
-
-Let $a$ represent the number of which the residue is sought.  Let $b$ represent the modulus used to find the residue.  Let $m$ represent
-the number of digits in $b$.  For the purposes of this discussion we will assume that the number of digits in $a$ is $2m$, which is generally true if 
-two $m$-digit numbers have been multiplied.  Dividing $a$ by $b$ is the same as dividing a $2m$ digit integer by a $m$ digit integer.  Digits below the 
-$m - 1$'th digit of $a$ will contribute at most a value of $1$ to the quotient because $\beta^k < b$ for any $0 \le k \le m - 1$.  Another way to
-express this is by re-writing $a$ as two parts.  If $a' \equiv a \mbox{ (mod }b^m\mbox{)}$ and $a'' = a - a'$ then 
-${a \over b} \equiv {{a' + a''} \over b}$ which is equivalent to ${a' \over b} + {a'' \over b}$.  Since $a'$ is bound to be less than $b$ the quotient
-is bound by $0 \le {a' \over b} < 1$.
-
-Since the digits of $a'$ do not contribute much to the quotient the observation is that they might as well be zero.  However, if the digits 
-``might as well be zero'' they might as well not be there in the first place.  Let $q_0 = \lfloor a/\beta^{m-1} \rfloor$ represent the input
-with the irrelevant digits trimmed.  Now the modular reduction is trimmed to the almost equivalent equation
-
-\begin{equation}
-c = a - b \cdot \lfloor (q_0 \cdot \mu) / \beta^{m+1} \rfloor
-\end{equation}
-
-Note that the original divisor $2^q$ has been replaced with $\beta^{m+1}$ where in this case $q$ is a multiple of $lg(\beta)$. Also note that the 
-exponent on the divisor when added to the amount $q_0$ was shifted by equals $2m$.  If the optimization had not been performed the divisor 
-would have the exponent $2m$ so in the end the exponents do ``add up''. Using the above equation the quotient 
-$\lfloor (q_0 \cdot \mu) / \beta^{m+1} \rfloor$ can be off from the true quotient by at most two.  The original fixed point quotient can be off
-by as much as one (\textit{provided the radix point is chosen suitably}) and now that the lower irrelevent digits have been trimmed the quotient
-can be off by an additional value of one for a total of at most two.  This implies that 
-$0 \le a - b \cdot \lfloor (q_0 \cdot \mu) / \beta^{m+1} \rfloor < 3b$.  By first subtracting $b$ times the quotient and then conditionally subtracting 
-$b$ once or twice the residue is found.
-
-The quotient is now found using $(m + 1)(m) = m^2 + m$ single precision multiplications and the residue with an additional $m^2$ single
-precision multiplications, ignoring the subtractions required.  In total $2m^2 + m$ single precision multiplications are required to find the residue.  
-This is considerably faster than the original attempt.
-
-For example, let $\beta = 10$ represent the radix of the digits.  Let $b = 9999$ represent the modulus which implies $m = 4$. Let $a = 99929878$ 
-represent the value of which the residue is desired.  In this case $q = 8$ since $10^7 < 9999^2$ meaning that $\mu = \lfloor \beta^{q}/b \rfloor = 10001$.  
-With the new observation the multiplicand for the quotient is equal to $q_0 = \lfloor a / \beta^{m - 1} \rfloor = 99929$.  The quotient is then 
-$\lfloor (q_0 \cdot \mu) / \beta^{m+1} \rfloor = 9993$.  Subtracting $9993b$ from $a$ and the correct residue $a \equiv 9871 \mbox{ (mod }b\mbox{)}$ 
-is found.  
-
-\subsection{Trimming the Quotient}
-So far the reduction algorithm has been optimized from $3m^2$ single precision multiplications down to $2m^2 + m$ single precision multiplications.  As 
-it stands now the algorithm is already fairly fast compared to a full integer division algorithm.  However, there is still room for
-optimization.  
-
-After the first multiplication inside the quotient ($q_0 \cdot \mu$) the value is shifted right by $m + 1$ places effectively nullifying the lower
-half of the product.  It would be nice to be able to remove those digits from the product to effectively cut down the number of single precision 
-multiplications.  If the number of digits in the modulus $m$ is far less than $\beta$ a full product is not required for the algorithm to work properly.  
-In fact the lower $m - 2$ digits will not affect the upper half of the product at all and do not need to be computed.  
-
-The value of $\mu$ is a $m$-digit number and $q_0$ is a $m + 1$ digit number.  Using a full multiplier $(m + 1)(m) = m^2 + m$ single precision
-multiplications would be required.  Using a multiplier that will only produce digits at and above the $m - 1$'th digit reduces the number
-of single precision multiplications to ${m^2 + m} \over 2$ single precision multiplications.  
-
-\subsection{Trimming the Residue}
-After the quotient has been calculated it is used to reduce the input.  As previously noted the algorithm is not exact and it can be off by a small
-multiple of the modulus, that is $0 \le a - b \cdot \lfloor (q_0 \cdot \mu) / \beta^{m+1} \rfloor < 3b$.  If $b$ is $m$ digits than the 
-result of reduction equation is a value of at most $m + 1$ digits (\textit{provided $3 < \beta$}) implying that the upper $m - 1$ digits are
-implicitly zero.  
-
-The next optimization arises from this very fact.  Instead of computing $b \cdot \lfloor (q_0 \cdot \mu) / \beta^{m+1} \rfloor$ using a full
-$O(m^2)$ multiplication algorithm only the lower $m+1$ digits of the product have to be computed.  Similarly the value of $a$ can
-be reduced modulo $\beta^{m+1}$ before the multiple of $b$ is subtracted which simplifes the subtraction as well.  A multiplication that produces 
-only the lower $m+1$ digits requires ${m^2 + 3m - 2} \over 2$ single precision multiplications.  
-
-With both optimizations in place the algorithm is the algorithm Barrett proposed.  It requires $m^2 + 2m - 1$ single precision multiplications which
-is considerably faster than the straightforward $3m^2$ method.  
-
-\subsection{The Barrett Algorithm}
-\newpage\begin{figure}[!here]
-\begin{small}
-\begin{center}
-\begin{tabular}{l}
-\hline Algorithm \textbf{mp\_reduce}. \\
-\textbf{Input}.   mp\_int $a$, mp\_int $b$ and $\mu = \lfloor \beta^{2m}/b \rfloor, m = \lceil lg_{\beta}(b) \rceil, (0 \le a < b^2, b > 1)$ \\
-\textbf{Output}.  $a \mbox{ (mod }b\mbox{)}$ \\
-\hline \\
-Let $m$ represent the number of digits in $b$.  \\
-1.  Make a copy of $a$ and store it in $q$.  (\textit{mp\_init\_copy}) \\
-2.  $q \leftarrow \lfloor q / \beta^{m - 1} \rfloor$ (\textit{mp\_rshd}) \\
-\\
-Produce the quotient. \\
-3.  $q \leftarrow q \cdot \mu$  (\textit{note: only produce digits at or above $m-1$}) \\
-4.  $q \leftarrow \lfloor q / \beta^{m + 1} \rfloor$ \\
-\\
-Subtract the multiple of modulus from the input. \\
-5.  $a \leftarrow a \mbox{ (mod }\beta^{m+1}\mbox{)}$ (\textit{mp\_mod\_2d}) \\
-6.  $q \leftarrow q \cdot b \mbox{ (mod }\beta^{m+1}\mbox{)}$ (\textit{s\_mp\_mul\_digs}) \\
-7.  $a \leftarrow a - q$ (\textit{mp\_sub}) \\
-\\
-Add $\beta^{m+1}$ if a carry occured. \\
-8.  If $a < 0$ then (\textit{mp\_cmp\_d}) \\
-\hspace{3mm}8.1  $q \leftarrow 1$ (\textit{mp\_set}) \\
-\hspace{3mm}8.2  $q \leftarrow q \cdot \beta^{m+1}$ (\textit{mp\_lshd}) \\
-\hspace{3mm}8.3  $a \leftarrow a + q$ \\
-\\
-Now subtract the modulus if the residue is too large (e.g. quotient too small). \\
-9.  While $a \ge b$ do (\textit{mp\_cmp}) \\
-\hspace{3mm}9.1  $c \leftarrow a - b$ \\
-10.  Clear $q$. \\
-11.  Return(\textit{MP\_OKAY}) \\
-\hline
-\end{tabular}
-\end{center}
-\end{small}
-\caption{Algorithm mp\_reduce}
-\end{figure}
-
-\textbf{Algorithm mp\_reduce.}
-This algorithm will reduce the input $a$ modulo $b$ in place using the Barrett algorithm.  It is loosely based on algorithm 14.42 of HAC
-\cite[pp.  602]{HAC} which is based on the paper from Paul Barrett \cite{BARRETT}.  The algorithm has several restrictions and assumptions which must 
-be adhered to for the algorithm to work.
-
-First the modulus $b$ is assumed to be positive and greater than one.  If the modulus were less than or equal to one than subtracting
-a multiple of it would either accomplish nothing or actually enlarge the input.  The input $a$ must be in the range $0 \le a < b^2$ in order
-for the quotient to have enough precision.  If $a$ is the product of two numbers that were already reduced modulo $b$, this will not be a problem.
-Technically the algorithm will still work if $a \ge b^2$ but it will take much longer to finish.  The value of $\mu$ is passed as an argument to this 
-algorithm and is assumed to be calculated and stored before the algorithm is used.  
-
-Recall that the multiplication for the quotient on step 3 must only produce digits at or above the $m-1$'th position.  An algorithm called 
-$s\_mp\_mul\_high\_digs$ which has not been presented is used to accomplish this task.  The algorithm is based on $s\_mp\_mul\_digs$ except that
-instead of stopping at a given level of precision it starts at a given level of precision.  This optimal algorithm can only be used if the number
-of digits in $b$ is very much smaller than $\beta$.  
-
-While it is known that 
-$a \ge b \cdot \lfloor (q_0 \cdot \mu) / \beta^{m+1} \rfloor$ only the lower $m+1$ digits are being used to compute the residue, so an implied 
-``borrow'' from the higher digits might leave a negative result.  After the multiple of the modulus has been subtracted from $a$ the residue must be 
-fixed up in case it is negative.  The invariant $\beta^{m+1}$ must be added to the residue to make it positive again.  
-
-The while loop at step 9 will subtract $b$ until the residue is less than $b$.  If the algorithm is performed correctly this step is 
-performed at most twice, and on average once. However, if $a \ge b^2$ than it will iterate substantially more times than it should.
-
-\vspace{+3mm}\begin{small}
-\hspace{-5.1mm}{\bf File}: bn\_mp\_reduce.c
-\vspace{-3mm}
-\begin{alltt}
-016   
-017   /* reduces x mod m, assumes 0 < x < m**2, mu is 
-018    * precomputed via mp_reduce_setup.
-019    * From HAC pp.604 Algorithm 14.42
-020    */
-021   int mp_reduce (mp_int * x, mp_int * m, mp_int * mu)
-022   \{
-023     mp_int  q;
-024     int     res, um = m->used;
-025   
-026     /* q = x */
-027     if ((res = mp_init_copy (&q, x)) != MP_OKAY) \{
-028       return res;
-029     \}
-030   
-031     /* q1 = x / b**(k-1)  */
-032     mp_rshd (&q, um - 1);         
-033   
-034     /* according to HAC this optimization is ok */
-035     if (((unsigned long) um) > (((mp_digit)1) << (DIGIT_BIT - 1))) \{
-036       if ((res = mp_mul (&q, mu, &q)) != MP_OKAY) \{
-037         goto CLEANUP;
-038       \}
-039     \} else \{
-040   #ifdef BN_S_MP_MUL_HIGH_DIGS_C
-041       if ((res = s_mp_mul_high_digs (&q, mu, &q, um)) != MP_OKAY) \{
-042         goto CLEANUP;
-043       \}
-044   #elif defined(BN_FAST_S_MP_MUL_HIGH_DIGS_C)
-045       if ((res = fast_s_mp_mul_high_digs (&q, mu, &q, um)) != MP_OKAY) \{
-046         goto CLEANUP;
-047       \}
-048   #else 
-049       \{ 
-050         res = MP_VAL;
-051         goto CLEANUP;
-052       \}
-053   #endif
-054     \}
-055   
-056     /* q3 = q2 / b**(k+1) */
-057     mp_rshd (&q, um + 1);         
-058   
-059     /* x = x mod b**(k+1), quick (no division) */
-060     if ((res = mp_mod_2d (x, DIGIT_BIT * (um + 1), x)) != MP_OKAY) \{
-061       goto CLEANUP;
-062     \}
-063   
-064     /* q = q * m mod b**(k+1), quick (no division) */
-065     if ((res = s_mp_mul_digs (&q, m, &q, um + 1)) != MP_OKAY) \{
-066       goto CLEANUP;
-067     \}
-068   
-069     /* x = x - q */
-070     if ((res = mp_sub (x, &q, x)) != MP_OKAY) \{
-071       goto CLEANUP;
-072     \}
-073   
-074     /* If x < 0, add b**(k+1) to it */
-075     if (mp_cmp_d (x, 0) == MP_LT) \{
-076       mp_set (&q, 1);
-077       if ((res = mp_lshd (&q, um + 1)) != MP_OKAY)
-078         goto CLEANUP;
-079       if ((res = mp_add (x, &q, x)) != MP_OKAY)
-080         goto CLEANUP;
-081     \}
-082   
-083     /* Back off if it's too big */
-084     while (mp_cmp (x, m) != MP_LT) \{
-085       if ((res = s_mp_sub (x, m, x)) != MP_OKAY) \{
-086         goto CLEANUP;
-087       \}
-088     \}
-089     
-090   CLEANUP:
-091     mp_clear (&q);
-092   
-093     return res;
-094   \}
-095   #endif
-\end{alltt}
-\end{small}
-
-The first multiplication that determines the quotient can be performed by only producing the digits from $m - 1$ and up.  This essentially halves
-the number of single precision multiplications required.  However, the optimization is only safe if $\beta$ is much larger than the number of digits
-in the modulus.  In the source code this is evaluated on lines 36 to 43 where algorithm s\_mp\_mul\_high\_digs is used when it is
-safe to do so.  
-
-\subsection{The Barrett Setup Algorithm}
-In order to use algorithm mp\_reduce the value of $\mu$ must be calculated in advance.  Ideally this value should be computed once and stored for
-future use so that the Barrett algorithm can be used without delay.  
-
-\newpage\begin{figure}[!here]
-\begin{small}
-\begin{center}
-\begin{tabular}{l}
-\hline Algorithm \textbf{mp\_reduce\_setup}. \\
-\textbf{Input}.   mp\_int $a$ ($a > 1$)  \\
-\textbf{Output}.  $\mu \leftarrow \lfloor \beta^{2m}/a \rfloor$ \\
-\hline \\
-1.  $\mu \leftarrow 2^{2 \cdot lg(\beta) \cdot  m}$ (\textit{mp\_2expt}) \\
-2.  $\mu \leftarrow \lfloor \mu / b \rfloor$ (\textit{mp\_div}) \\
-3.  Return(\textit{MP\_OKAY}) \\
-\hline
-\end{tabular}
-\end{center}
-\end{small}
-\caption{Algorithm mp\_reduce\_setup}
-\end{figure}
-
-\textbf{Algorithm mp\_reduce\_setup.}
-This algorithm computes the reciprocal $\mu$ required for Barrett reduction.  First $\beta^{2m}$ is calculated as $2^{2 \cdot lg(\beta) \cdot  m}$ which
-is equivalent and much faster.  The final value is computed by taking the integer quotient of $\lfloor \mu / b \rfloor$.
-
-\vspace{+3mm}\begin{small}
-\hspace{-5.1mm}{\bf File}: bn\_mp\_reduce\_setup.c
-\vspace{-3mm}
-\begin{alltt}
-016   
-017   /* pre-calculate the value required for Barrett reduction
-018    * For a given modulus "b" it calulates the value required in "a"
-019    */
-020   int mp_reduce_setup (mp_int * a, mp_int * b)
-021   \{
-022     int     res;
-023     
-024     if ((res = mp_2expt (a, b->used * 2 * DIGIT_BIT)) != MP_OKAY) \{
-025       return res;
-026     \}
-027     return mp_div (a, b, a, NULL);
-028   \}
-029   #endif
-\end{alltt}
-\end{small}
-
-This simple routine calculates the reciprocal $\mu$ required by Barrett reduction.  Note the extended usage of algorithm mp\_div where the variable
-which would received the remainder is passed as NULL.  As will be discussed in~\ref{sec:division} the division routine allows both the quotient and the 
-remainder to be passed as NULL meaning to ignore the value.  
-
-\section{The Montgomery Reduction}
-Montgomery reduction\footnote{Thanks to Niels Ferguson for his insightful explanation of the algorithm.} \cite{MONT} is by far the most interesting 
-form of reduction in common use.  It computes a modular residue which is not actually equal to the residue of the input yet instead equal to a 
-residue times a constant.  However, as perplexing as this may sound the algorithm is relatively simple and very efficient.  
-
-Throughout this entire section the variable $n$ will represent the modulus used to form the residue.  As will be discussed shortly the value of
-$n$ must be odd.  The variable $x$ will represent the quantity of which the residue is sought.  Similar to the Barrett algorithm the input
-is restricted to $0 \le x < n^2$.  To begin the description some simple number theory facts must be established.
-
-\textbf{Fact 1.}  Adding $n$ to $x$ does not change the residue since in effect it adds one to the quotient $\lfloor x / n \rfloor$.  Another way
-to explain this is that $n$ is (\textit{or multiples of $n$ are}) congruent to zero modulo $n$.  Adding zero will not change the value of the residue.  
-
-\textbf{Fact 2.}  If $x$ is even then performing a division by two in $\Z$ is congruent to $x \cdot 2^{-1} \mbox{ (mod }n\mbox{)}$.  Actually
-this is an application of the fact that if $x$ is evenly divisible by any $k \in \Z$ then division in $\Z$ will be congruent to 
-multiplication by $k^{-1}$ modulo $n$.  
-
-From these two simple facts the following simple algorithm can be derived.
-
-\newpage\begin{figure}[!here]
-\begin{small}
-\begin{center}
-\begin{tabular}{l}
-\hline Algorithm \textbf{Montgomery Reduction}. \\
-\textbf{Input}.   Integer $x$, $n$ and $k$ \\
-\textbf{Output}.  $2^{-k}x \mbox{ (mod }n\mbox{)}$ \\
-\hline \\
-1.  for $t$ from $1$ to $k$ do \\
-\hspace{3mm}1.1  If $x$ is odd then \\
-\hspace{6mm}1.1.1  $x \leftarrow x + n$ \\
-\hspace{3mm}1.2  $x \leftarrow x/2$ \\
-2.  Return $x$. \\
-\hline
-\end{tabular}
-\end{center}
-\end{small}
-\caption{Algorithm Montgomery Reduction}
-\end{figure}
-
-The algorithm reduces the input one bit at a time using the two congruencies stated previously.  Inside the loop $n$, which is odd, is
-added to $x$ if $x$ is odd.  This forces $x$ to be even which allows the division by two in $\Z$ to be congruent to a modular division by two.  Since
-$x$ is assumed to be initially much larger than $n$ the addition of $n$ will contribute an insignificant magnitude to $x$.  Let $r$ represent the 
-final result of the Montgomery algorithm.  If $k > lg(n)$ and $0 \le x < n^2$ then the final result is limited to 
-$0 \le r < \lfloor x/2^k \rfloor + n$.  As a result at most a single subtraction is required to get the residue desired.
-
-\begin{figure}[here]
-\begin{small}
-\begin{center}
-\begin{tabular}{|c|l|}
-\hline \textbf{Step number ($t$)} & \textbf{Result ($x$)} \\
-\hline $1$ & $x + n = 5812$, $x/2 = 2906$ \\
-\hline $2$ & $x/2 = 1453$ \\
-\hline $3$ & $x + n = 1710$, $x/2 = 855$ \\
-\hline $4$ & $x + n = 1112$, $x/2 = 556$ \\
-\hline $5$ & $x/2 = 278$ \\
-\hline $6$ & $x/2 = 139$ \\
-\hline $7$ & $x + n = 396$, $x/2 = 198$ \\
-\hline $8$ & $x/2 = 99$ \\
-\hline
-\end{tabular}
-\end{center}
-\end{small}
-\caption{Example of Montgomery Reduction (I)}
-\label{fig:MONT1}
-\end{figure}
-
-Consider the example in figure~\ref{fig:MONT1} which reduces $x = 5555$ modulo $n = 257$ when $k = 8$.  The result of the algorithm $r = 99$ is
-congruent to the value of $2^{-8} \cdot 5555 \mbox{ (mod }257\mbox{)}$.  When $r$ is multiplied by $2^8$ modulo $257$ the correct residue 
-$r \equiv 158$ is produced.  
-
-Let $k = \lfloor lg(n) \rfloor + 1$ represent the number of bits in $n$.  The current algorithm requires $2k^2$ single precision shifts
-and $k^2$ single precision additions.  At this rate the algorithm is most certainly slower than Barrett reduction and not terribly useful.  
-Fortunately there exists an alternative representation of the algorithm.
-
-\begin{figure}[!here]
-\begin{small}
-\begin{center}
-\begin{tabular}{l}
-\hline Algorithm \textbf{Montgomery Reduction} (modified I). \\
-\textbf{Input}.   Integer $x$, $n$ and $k$ \\
-\textbf{Output}.  $2^{-k}x \mbox{ (mod }n\mbox{)}$ \\
-\hline \\
-1.  for $t$ from $0$ to $k - 1$ do \\
-\hspace{3mm}1.1  If the $t$'th bit of $x$ is one then \\
-\hspace{6mm}1.1.1  $x \leftarrow x + 2^tn$ \\
-2.  Return $x/2^k$. \\
-\hline
-\end{tabular}
-\end{center}
-\end{small}
-\caption{Algorithm Montgomery Reduction (modified I)}
-\end{figure}
-
-This algorithm is equivalent since $2^tn$ is a multiple of $n$ and the lower $k$ bits of $x$ are zero by step 2.  The number of single
-precision shifts has now been reduced from $2k^2$ to $k^2 + k$ which is only a small improvement.
-
-\begin{figure}[here]
-\begin{small}
-\begin{center}
-\begin{tabular}{|c|l|r|}
-\hline \textbf{Step number ($t$)} & \textbf{Result ($x$)} & \textbf{Result ($x$) in Binary} \\
-\hline -- & $5555$ & $1010110110011$ \\
-\hline $1$ & $x + 2^{0}n = 5812$ &  $1011010110100$ \\
-\hline $2$ & $5812$ & $1011010110100$ \\
-\hline $3$ & $x + 2^{2}n = 6840$ & $1101010111000$ \\
-\hline $4$ & $x + 2^{3}n = 8896$ & $10001011000000$ \\
-\hline $5$ & $8896$ & $10001011000000$ \\
-\hline $6$ & $8896$ & $10001011000000$ \\
-\hline $7$ & $x + 2^{6}n = 25344$ & $110001100000000$ \\
-\hline $8$ & $25344$ & $110001100000000$ \\
-\hline -- & $x/2^k = 99$ & \\
-\hline
-\end{tabular}
-\end{center}
-\end{small}
-\caption{Example of Montgomery Reduction (II)}
-\label{fig:MONT2}
-\end{figure}
-
-Figure~\ref{fig:MONT2} demonstrates the modified algorithm reducing $x = 5555$ modulo $n = 257$ with $k = 8$. 
-With this algorithm a single shift right at the end is the only right shift required to reduce the input instead of $k$ right shifts inside the 
-loop.  Note that for the iterations $t = 2, 5, 6$ and $8$ where the result $x$ is not changed.  In those iterations the $t$'th bit of $x$ is 
-zero and the appropriate multiple of $n$ does not need to be added to force the $t$'th bit of the result to zero.  
-
-\subsection{Digit Based Montgomery Reduction}
-Instead of computing the reduction on a bit-by-bit basis it is actually much faster to compute it on digit-by-digit basis.  Consider the
-previous algorithm re-written to compute the Montgomery reduction in this new fashion.
-
-\begin{figure}[!here]
-\begin{small}
-\begin{center}
-\begin{tabular}{l}
-\hline Algorithm \textbf{Montgomery Reduction} (modified II). \\
-\textbf{Input}.   Integer $x$, $n$ and $k$ \\
-\textbf{Output}.  $\beta^{-k}x \mbox{ (mod }n\mbox{)}$ \\
-\hline \\
-1.  for $t$ from $0$ to $k - 1$ do \\
-\hspace{3mm}1.1  $x \leftarrow x + \mu n \beta^t$ \\
-2.  Return $x/\beta^k$. \\
-\hline
-\end{tabular}
-\end{center}
-\end{small}
-\caption{Algorithm Montgomery Reduction (modified II)}
-\end{figure}
-
-The value $\mu n \beta^t$ is a multiple of the modulus $n$ meaning that it will not change the residue.  If the first digit of 
-the value $\mu n \beta^t$ equals the negative (modulo $\beta$) of the $t$'th digit of $x$ then the addition will result in a zero digit.  This
-problem breaks down to solving the following congruency.  
-
-\begin{center}
-\begin{tabular}{rcl}
-$x_t + \mu n_0$ & $\equiv$ & $0 \mbox{ (mod }\beta\mbox{)}$ \\
-$\mu n_0$ & $\equiv$ & $-x_t \mbox{ (mod }\beta\mbox{)}$ \\
-$\mu$ & $\equiv$ & $-x_t/n_0 \mbox{ (mod }\beta\mbox{)}$ \\
-\end{tabular}
-\end{center}
-
-In each iteration of the loop on step 1 a new value of $\mu$ must be calculated.  The value of $-1/n_0 \mbox{ (mod }\beta\mbox{)}$ is used 
-extensively in this algorithm and should be precomputed.  Let $\rho$ represent the negative of the modular inverse of $n_0$ modulo $\beta$.  
-
-For example, let $\beta = 10$ represent the radix.  Let $n = 17$ represent the modulus which implies $k = 2$ and $\rho \equiv 7$.  Let $x = 33$ 
-represent the value to reduce.
-
-\newpage\begin{figure}
-\begin{center}
-\begin{tabular}{|c|c|c|}
-\hline \textbf{Step ($t$)} & \textbf{Value of $x$} & \textbf{Value of $\mu$} \\
-\hline --                 & $33$ & --\\
-\hline $0$                 & $33 + \mu n = 50$ & $1$ \\
-\hline $1$                 & $50 + \mu n \beta = 900$ & $5$ \\
-\hline
-\end{tabular}
-\end{center}
-\caption{Example of Montgomery Reduction}
-\end{figure}
-
-The final result $900$ is then divided by $\beta^k$ to produce the final result $9$.  The first observation is that $9 \nequiv x \mbox{ (mod }n\mbox{)}$ 
-which implies the result is not the modular residue of $x$ modulo $n$.  However, recall that the residue is actually multiplied by $\beta^{-k}$ in
-the algorithm.  To get the true residue the value must be multiplied by $\beta^k$.  In this case $\beta^k \equiv 15 \mbox{ (mod }n\mbox{)}$ and
-the correct residue is $9 \cdot 15 \equiv 16 \mbox{ (mod }n\mbox{)}$.  
-
-\subsection{Baseline Montgomery Reduction}
-The baseline Montgomery reduction algorithm will produce the residue for any size input.  It is designed to be a catch-all algororithm for 
-Montgomery reductions.  
-
-\newpage\begin{figure}[!here]
-\begin{small}
-\begin{center}
-\begin{tabular}{l}
-\hline Algorithm \textbf{mp\_montgomery\_reduce}. \\
-\textbf{Input}.   mp\_int $x$, mp\_int $n$ and a digit $\rho \equiv -1/n_0 \mbox{ (mod }n\mbox{)}$. \\
-\hspace{11.5mm}($0 \le x < n^2, n > 1, (n, \beta) = 1, \beta^k > n$) \\
-\textbf{Output}.  $\beta^{-k}x \mbox{ (mod }n\mbox{)}$ \\
-\hline \\
-1.  $digs \leftarrow 2n.used + 1$ \\
-2.  If $digs < MP\_ARRAY$ and $m.used < \delta$ then \\
-\hspace{3mm}2.1  Use algorithm fast\_mp\_montgomery\_reduce instead. \\
-\\
-Setup $x$ for the reduction. \\
-3.  If $x.alloc < digs$ then grow $x$ to $digs$ digits. \\
-4.  $x.used \leftarrow digs$ \\
-\\
-Eliminate the lower $k$ digits. \\
-5.  For $ix$ from $0$ to $k - 1$ do \\
-\hspace{3mm}5.1  $\mu \leftarrow x_{ix} \cdot \rho \mbox{ (mod }\beta\mbox{)}$ \\
-\hspace{3mm}5.2  $u \leftarrow 0$ \\
-\hspace{3mm}5.3  For $iy$ from $0$ to $k - 1$ do \\
-\hspace{6mm}5.3.1  $\hat r \leftarrow \mu n_{iy} + x_{ix + iy} + u$ \\
-\hspace{6mm}5.3.2  $x_{ix + iy} \leftarrow \hat r \mbox{ (mod }\beta\mbox{)}$ \\
-\hspace{6mm}5.3.3  $u \leftarrow \lfloor \hat r / \beta \rfloor$ \\
-\hspace{3mm}5.4  While $u > 0$ do \\
-\hspace{6mm}5.4.1  $iy \leftarrow iy + 1$ \\
-\hspace{6mm}5.4.2  $x_{ix + iy} \leftarrow x_{ix + iy} + u$ \\
-\hspace{6mm}5.4.3  $u \leftarrow \lfloor x_{ix+iy} / \beta \rfloor$ \\
-\hspace{6mm}5.4.4  $x_{ix + iy} \leftarrow x_{ix+iy} \mbox{ (mod }\beta\mbox{)}$ \\
-\\
-Divide by $\beta^k$ and fix up as required. \\
-6.  $x \leftarrow \lfloor x / \beta^k \rfloor$ \\
-7.  If $x \ge n$ then \\
-\hspace{3mm}7.1  $x \leftarrow x - n$ \\
-8.  Return(\textit{MP\_OKAY}). \\
-\hline
-\end{tabular}
-\end{center}
-\end{small}
-\caption{Algorithm mp\_montgomery\_reduce}
-\end{figure}
-
-\textbf{Algorithm mp\_montgomery\_reduce.}
-This algorithm reduces the input $x$ modulo $n$ in place using the Montgomery reduction algorithm.  The algorithm is loosely based
-on algorithm 14.32 of \cite[pp.601]{HAC} except it merges the multiplication of $\mu n \beta^t$ with the addition in the inner loop.  The
-restrictions on this algorithm are fairly easy to adapt to.  First $0 \le x < n^2$ bounds the input to numbers in the same range as 
-for the Barrett algorithm.  Additionally if $n > 1$ and $n$ is odd there will exist a modular inverse $\rho$.  $\rho$ must be calculated in
-advance of this algorithm.  Finally the variable $k$ is fixed and a pseudonym for $n.used$.  
-
-Step 2 decides whether a faster Montgomery algorithm can be used.  It is based on the Comba technique meaning that there are limits on
-the size of the input.  This algorithm is discussed in sub-section 6.3.3.
-
-Step 5 is the main reduction loop of the algorithm.  The value of $\mu$ is calculated once per iteration in the outer loop.  The inner loop
-calculates $x + \mu n \beta^{ix}$ by multiplying $\mu n$ and adding the result to $x$ shifted by $ix$ digits.  Both the addition and
-multiplication are performed in the same loop to save time and memory.  Step 5.4 will handle any additional carries that escape the inner loop.
-
-Using a quick inspection this algorithm requires $n$ single precision multiplications for the outer loop and $n^2$ single precision multiplications 
-in the inner loop.  In total $n^2 + n$ single precision multiplications which compares favourably to Barrett at $n^2 + 2n - 1$ single precision
-multiplications.  
-
-\vspace{+3mm}\begin{small}
-\hspace{-5.1mm}{\bf File}: bn\_mp\_montgomery\_reduce.c
-\vspace{-3mm}
-\begin{alltt}
-016   
-017   /* computes xR**-1 == x (mod N) via Montgomery Reduction */
-018   int
-019   mp_montgomery_reduce (mp_int * x, mp_int * n, mp_digit rho)
-020   \{
-021     int     ix, res, digs;
-022     mp_digit mu;
-023   
-024     /* can the fast reduction [comba] method be used?
-025      *
-026      * Note that unlike in mul you're safely allowed *less*
-027      * than the available columns [255 per default] since carries
-028      * are fixed up in the inner loop.
-029      */
-030     digs = n->used * 2 + 1;
-031     if ((digs < MP_WARRAY) &&
-032         n->used <
-033         (1 << ((CHAR_BIT * sizeof (mp_word)) - (2 * DIGIT_BIT)))) \{
-034       return fast_mp_montgomery_reduce (x, n, rho);
-035     \}
-036   
-037     /* grow the input as required */
-038     if (x->alloc < digs) \{
-039       if ((res = mp_grow (x, digs)) != MP_OKAY) \{
-040         return res;
-041       \}
-042     \}
-043     x->used = digs;
-044   
-045     for (ix = 0; ix < n->used; ix++) \{
-046       /* mu = ai * rho mod b
-047        *
-048        * The value of rho must be precalculated via
-049        * montgomery_setup() such that
-050        * it equals -1/n0 mod b this allows the
-051        * following inner loop to reduce the
-052        * input one digit at a time
-053        */
-054       mu = (mp_digit) (((mp_word)x->dp[ix]) * ((mp_word)rho) & MP_MASK);
-055   
-056       /* a = a + mu * m * b**i */
-057       \{
-058         register int iy;
-059         register mp_digit *tmpn, *tmpx, u;
-060         register mp_word r;
-061   
-062         /* alias for digits of the modulus */
-063         tmpn = n->dp;
-064   
-065         /* alias for the digits of x [the input] */
-066         tmpx = x->dp + ix;
-067   
-068         /* set the carry to zero */
-069         u = 0;
-070   
-071         /* Multiply and add in place */
-072         for (iy = 0; iy < n->used; iy++) \{
-073           /* compute product and sum */
-074           r       = ((mp_word)mu) * ((mp_word)*tmpn++) +
-075                     ((mp_word) u) + ((mp_word) * tmpx);
-076   
-077           /* get carry */
-078           u       = (mp_digit)(r >> ((mp_word) DIGIT_BIT));
-079   
-080           /* fix digit */
-081           *tmpx++ = (mp_digit)(r & ((mp_word) MP_MASK));
-082         \}
-083         /* At this point the ix'th digit of x should be zero */
-084   
-085   
-086         /* propagate carries upwards as required*/
-087         while (u) \{
-088           *tmpx   += u;
-089           u        = *tmpx >> DIGIT_BIT;
-090           *tmpx++ &= MP_MASK;
-091         \}
-092       \}
-093     \}
-094   
-095     /* at this point the n.used'th least
-096      * significant digits of x are all zero
-097      * which means we can shift x to the
-098      * right by n.used digits and the
-099      * residue is unchanged.
-100      */
-101   
-102     /* x = x/b**n.used */
-103     mp_clamp(x);
-104     mp_rshd (x, n->used);
-105   
-106     /* if x >= n then x = x - n */
-107     if (mp_cmp_mag (x, n) != MP_LT) \{
-108       return s_mp_sub (x, n, x);
-109     \}
-110   
-111     return MP_OKAY;
-112   \}
-113   #endif
-\end{alltt}
-\end{small}
-
-This is the baseline implementation of the Montgomery reduction algorithm.  Lines 30 to 35 determine if the Comba based
-routine can be used instead.  Line 48 computes the value of $\mu$ for that particular iteration of the outer loop.  
-
-The multiplication $\mu n \beta^{ix}$ is performed in one step in the inner loop.  The alias $tmpx$ refers to the $ix$'th digit of $x$ and
-the alias $tmpn$ refers to the modulus $n$.  
-
-\subsection{Faster ``Comba'' Montgomery Reduction}
-
-The Montgomery reduction requires fewer single precision multiplications than a Barrett reduction, however it is much slower due to the serial
-nature of the inner loop.  The Barrett reduction algorithm requires two slightly modified multipliers which can be implemented with the Comba
-technique.  The Montgomery reduction algorithm cannot directly use the Comba technique to any significant advantage since the inner loop calculates
-a $k \times 1$ product $k$ times. 
-
-The biggest obstacle is that at the $ix$'th iteration of the outer loop the value of $x_{ix}$ is required to calculate $\mu$.  This means the 
-carries from $0$ to $ix - 1$ must have been propagated upwards to form a valid $ix$'th digit.  The solution as it turns out is very simple.  
-Perform a Comba like multiplier and inside the outer loop just after the inner loop fix up the $ix + 1$'th digit by forwarding the carry.  
-
-With this change in place the Montgomery reduction algorithm can be performed with a Comba style multiplication loop which substantially increases
-the speed of the algorithm.  
-
-\newpage\begin{figure}[!here]
-\begin{small}
-\begin{center}
-\begin{tabular}{l}
-\hline Algorithm \textbf{fast\_mp\_montgomery\_reduce}. \\
-\textbf{Input}.   mp\_int $x$, mp\_int $n$ and a digit $\rho \equiv -1/n_0 \mbox{ (mod }n\mbox{)}$. \\
-\hspace{11.5mm}($0 \le x < n^2, n > 1, (n, \beta) = 1, \beta^k > n$) \\
-\textbf{Output}.  $\beta^{-k}x \mbox{ (mod }n\mbox{)}$ \\
-\hline \\
-Place an array of \textbf{MP\_WARRAY} mp\_word variables called $\hat W$ on the stack. \\
-1.  if $x.alloc < n.used + 1$ then grow $x$ to $n.used + 1$ digits. \\
-Copy the digits of $x$ into the array $\hat W$ \\
-2.  For $ix$ from $0$ to $x.used - 1$ do \\
-\hspace{3mm}2.1  $\hat W_{ix} \leftarrow x_{ix}$ \\
-3.  For $ix$ from $x.used$ to $2n.used - 1$ do \\
-\hspace{3mm}3.1  $\hat W_{ix} \leftarrow 0$ \\
-Elimiate the lower $k$ digits. \\
-4.  for $ix$ from $0$ to $n.used - 1$ do \\
-\hspace{3mm}4.1  $\mu \leftarrow \hat W_{ix} \cdot \rho \mbox{ (mod }\beta\mbox{)}$ \\
-\hspace{3mm}4.2  For $iy$ from $0$ to $n.used - 1$ do \\
-\hspace{6mm}4.2.1  $\hat W_{iy + ix} \leftarrow \hat W_{iy + ix} + \mu \cdot n_{iy}$ \\
-\hspace{3mm}4.3  $\hat W_{ix + 1} \leftarrow \hat W_{ix + 1} + \lfloor \hat W_{ix} / \beta \rfloor$ \\
-Propagate carries upwards. \\
-5.  for $ix$ from $n.used$ to $2n.used + 1$ do \\
-\hspace{3mm}5.1  $\hat W_{ix + 1} \leftarrow \hat W_{ix + 1} + \lfloor \hat W_{ix} / \beta \rfloor$ \\
-Shift right and reduce modulo $\beta$ simultaneously. \\
-6.  for $ix$ from $0$ to $n.used + 1$ do \\
-\hspace{3mm}6.1  $x_{ix} \leftarrow \hat W_{ix + n.used} \mbox{ (mod }\beta\mbox{)}$ \\
-Zero excess digits and fixup $x$. \\
-7.  if $x.used > n.used + 1$ then do \\
-\hspace{3mm}7.1  for $ix$ from $n.used + 1$ to $x.used - 1$ do \\
-\hspace{6mm}7.1.1  $x_{ix} \leftarrow 0$ \\
-8.  $x.used \leftarrow n.used + 1$ \\
-9.  Clamp excessive digits of $x$. \\
-10.  If $x \ge n$ then \\
-\hspace{3mm}10.1  $x \leftarrow x - n$ \\
-11.  Return(\textit{MP\_OKAY}). \\
-\hline
-\end{tabular}
-\end{center}
-\end{small}
-\caption{Algorithm fast\_mp\_montgomery\_reduce}
-\end{figure}
-
-\textbf{Algorithm fast\_mp\_montgomery\_reduce.}
-This algorithm will compute the Montgomery reduction of $x$ modulo $n$ using the Comba technique.  It is on most computer platforms significantly
-faster than algorithm mp\_montgomery\_reduce and algorithm mp\_reduce (\textit{Barrett reduction}).  The algorithm has the same restrictions
-on the input as the baseline reduction algorithm.  An additional two restrictions are imposed on this algorithm.  The number of digits $k$ in the 
-the modulus $n$ must not violate $MP\_WARRAY > 2k +1$ and $n < \delta$.   When $\beta = 2^{28}$ this algorithm can be used to reduce modulo
-a modulus of at most $3,556$ bits in length.  
-
-As in the other Comba reduction algorithms there is a $\hat W$ array which stores the columns of the product.  It is initially filled with the
-contents of $x$ with the excess digits zeroed.  The reduction loop is very similar the to the baseline loop at heart.  The multiplication on step
-4.1 can be single precision only since $ab \mbox{ (mod }\beta\mbox{)} \equiv (a \mbox{ mod }\beta)(b \mbox{ mod }\beta)$.  Some multipliers such
-as those on the ARM processors take a variable length time to complete depending on the number of bytes of result it must produce.  By performing
-a single precision multiplication instead half the amount of time is spent.
-
-Also note that digit $\hat W_{ix}$ must have the carry from the $ix - 1$'th digit propagated upwards in order for this to work.  That is what step
-4.3 will do.  In effect over the $n.used$ iterations of the outer loop the $n.used$'th lower columns all have the their carries propagated forwards.  Note
-how the upper bits of those same words are not reduced modulo $\beta$.  This is because those values will be discarded shortly and there is no
-point.
-
-Step 5 will propagate the remainder of the carries upwards.  On step 6 the columns are reduced modulo $\beta$ and shifted simultaneously as they are
-stored in the destination $x$.  
-
-\vspace{+3mm}\begin{small}
-\hspace{-5.1mm}{\bf File}: bn\_fast\_mp\_montgomery\_reduce.c
-\vspace{-3mm}
-\begin{alltt}
-016   
-017   /* computes xR**-1 == x (mod N) via Montgomery Reduction
-018    *
-019    * This is an optimized implementation of montgomery_reduce
-020    * which uses the comba method to quickly calculate the columns of the
-021    * reduction.
-022    *
-023    * Based on Algorithm 14.32 on pp.601 of HAC.
-024   */
-025   int fast_mp_montgomery_reduce (mp_int * x, mp_int * n, mp_digit rho)
-026   \{
-027     int     ix, res, olduse;
-028     mp_word W[MP_WARRAY];
-029   
-030     /* get old used count */
-031     olduse = x->used;
-032   
-033     /* grow a as required */
-034     if (x->alloc < n->used + 1) \{
-035       if ((res = mp_grow (x, n->used + 1)) != MP_OKAY) \{
-036         return res;
-037       \}
-038     \}
-039   
-040     /* first we have to get the digits of the input into
-041      * an array of double precision words W[...]
-042      */
-043     \{
-044       register mp_word *_W;
-045       register mp_digit *tmpx;
-046   
-047       /* alias for the W[] array */
-048       _W   = W;
-049   
-050       /* alias for the digits of  x*/
-051       tmpx = x->dp;
-052   
-053       /* copy the digits of a into W[0..a->used-1] */
-054       for (ix = 0; ix < x->used; ix++) \{
-055         *_W++ = *tmpx++;
-056       \}
-057   
-058       /* zero the high words of W[a->used..m->used*2] */
-059       for (; ix < n->used * 2 + 1; ix++) \{
-060         *_W++ = 0;
-061       \}
-062     \}
-063   
-064     /* now we proceed to zero successive digits
-065      * from the least significant upwards
-066      */
-067     for (ix = 0; ix < n->used; ix++) \{
-068       /* mu = ai * m' mod b
-069        *
-070        * We avoid a double precision multiplication (which isn't required)
-071        * by casting the value down to a mp_digit.  Note this requires
-072        * that W[ix-1] have  the carry cleared (see after the inner loop)
-073        */
-074       register mp_digit mu;
-075       mu = (mp_digit) (((W[ix] & MP_MASK) * rho) & MP_MASK);
-076   
-077       /* a = a + mu * m * b**i
-078        *
-079        * This is computed in place and on the fly.  The multiplication
-080        * by b**i is handled by offseting which columns the results
-081        * are added to.
-082        *
-083        * Note the comba method normally doesn't handle carries in the
-084        * inner loop In this case we fix the carry from the previous
-085        * column since the Montgomery reduction requires digits of the
-086        * result (so far) [see above] to work.  This is
-087        * handled by fixing up one carry after the inner loop.  The
-088        * carry fixups are done in order so after these loops the
-089        * first m->used words of W[] have the carries fixed
-090        */
-091       \{
-092         register int iy;
-093         register mp_digit *tmpn;
-094         register mp_word *_W;
-095   
-096         /* alias for the digits of the modulus */
-097         tmpn = n->dp;
-098   
-099         /* Alias for the columns set by an offset of ix */
-100         _W = W + ix;
-101   
-102         /* inner loop */
-103         for (iy = 0; iy < n->used; iy++) \{
-104             *_W++ += ((mp_word)mu) * ((mp_word)*tmpn++);
-105         \}
-106       \}
-107   
-108       /* now fix carry for next digit, W[ix+1] */
-109       W[ix + 1] += W[ix] >> ((mp_word) DIGIT_BIT);
-110     \}
-111   
-112     /* now we have to propagate the carries and
-113      * shift the words downward [all those least
-114      * significant digits we zeroed].
-115      */
-116     \{
-117       register mp_digit *tmpx;
-118       register mp_word *_W, *_W1;
-119   
-120       /* nox fix rest of carries */
-121   
-122       /* alias for current word */
-123       _W1 = W + ix;
-124   
-125       /* alias for next word, where the carry goes */
-126       _W = W + ++ix;
-127   
-128       for (; ix <= n->used * 2 + 1; ix++) \{
-129         *_W++ += *_W1++ >> ((mp_word) DIGIT_BIT);
-130       \}
-131   
-132       /* copy out, A = A/b**n
-133        *
-134        * The result is A/b**n but instead of converting from an
-135        * array of mp_word to mp_digit than calling mp_rshd
-136        * we just copy them in the right order
-137        */
-138   
-139       /* alias for destination word */
-140       tmpx = x->dp;
-141   
-142       /* alias for shifted double precision result */
-143       _W = W + n->used;
-144   
-145       for (ix = 0; ix < n->used + 1; ix++) \{
-146         *tmpx++ = (mp_digit)(*_W++ & ((mp_word) MP_MASK));
-147       \}
-148   
-149       /* zero oldused digits, if the input a was larger than
-150        * m->used+1 we'll have to clear the digits
-151        */
-152       for (; ix < olduse; ix++) \{
-153         *tmpx++ = 0;
-154       \}
-155     \}
-156   
-157     /* set the max used and clamp */
-158     x->used = n->used + 1;
-159     mp_clamp (x);
-160   
-161     /* if A >= m then A = A - m */
-162     if (mp_cmp_mag (x, n) != MP_LT) \{
-163       return s_mp_sub (x, n, x);
-164     \}
-165     return MP_OKAY;
-166   \}
-167   #endif
-\end{alltt}
-\end{small}
-
-The $\hat W$ array is first filled with digits of $x$ on line 50 then the rest of the digits are zeroed on line 54.  Both loops share
-the same alias variables to make the code easier to read.  
-
-The value of $\mu$ is calculated in an interesting fashion.  First the value $\hat W_{ix}$ is reduced modulo $\beta$ and cast to a mp\_digit.  This
-forces the compiler to use a single precision multiplication and prevents any concerns about loss of precision.   Line 109 fixes the carry 
-for the next iteration of the loop by propagating the carry from $\hat W_{ix}$ to $\hat W_{ix+1}$.
-
-The for loop on line 108 propagates the rest of the carries upwards through the columns.  The for loop on line 125 reduces the columns
-modulo $\beta$ and shifts them $k$ places at the same time.  The alias $\_ \hat W$ actually refers to the array $\hat W$ starting at the $n.used$'th
-digit, that is $\_ \hat W_{t} = \hat W_{n.used + t}$.  
-
-\subsection{Montgomery Setup}
-To calculate the variable $\rho$ a relatively simple algorithm will be required.  
-
-\begin{figure}[!here]
-\begin{small}
-\begin{center}
-\begin{tabular}{l}
-\hline Algorithm \textbf{mp\_montgomery\_setup}. \\
-\textbf{Input}.   mp\_int $n$ ($n > 1$ and $(n, 2) = 1$) \\
-\textbf{Output}.  $\rho \equiv -1/n_0 \mbox{ (mod }\beta\mbox{)}$ \\
-\hline \\
-1.  $b \leftarrow n_0$ \\
-2.  If $b$ is even return(\textit{MP\_VAL}) \\
-3.  $x \leftarrow ((b + 2) \mbox{ AND } 4) << 1) + b$ \\
-4.  for $k$ from 0 to $\lceil lg(lg(\beta)) \rceil - 2$ do \\
-\hspace{3mm}4.1  $x \leftarrow x \cdot (2 - bx)$ \\
-5.  $\rho \leftarrow \beta - x \mbox{ (mod }\beta\mbox{)}$ \\
-6.  Return(\textit{MP\_OKAY}). \\
-\hline
-\end{tabular}
-\end{center}
-\end{small}
-\caption{Algorithm mp\_montgomery\_setup} 
-\end{figure}
-
-\textbf{Algorithm mp\_montgomery\_setup.}
-This algorithm will calculate the value of $\rho$ required within the Montgomery reduction algorithms.  It uses a very interesting trick 
-to calculate $1/n_0$ when $\beta$ is a power of two.  
-
-\vspace{+3mm}\begin{small}
-\hspace{-5.1mm}{\bf File}: bn\_mp\_montgomery\_setup.c
-\vspace{-3mm}
-\begin{alltt}
-016   
-017   /* setups the montgomery reduction stuff */
-018   int
-019   mp_montgomery_setup (mp_int * n, mp_digit * rho)
-020   \{
-021     mp_digit x, b;
-022   
-023   /* fast inversion mod 2**k
-024    *
-025    * Based on the fact that
-026    *
-027    * XA = 1 (mod 2**n)  =>  (X(2-XA)) A = 1 (mod 2**2n)
-028    *                    =>  2*X*A - X*X*A*A = 1
-029    *                    =>  2*(1) - (1)     = 1
-030    */
-031     b = n->dp[0];
-032   
-033     if ((b & 1) == 0) \{
-034       return MP_VAL;
-035     \}
-036   
-037     x = (((b + 2) & 4) << 1) + b; /* here x*a==1 mod 2**4 */
-038     x *= 2 - b * x;               /* here x*a==1 mod 2**8 */
-039   #if !defined(MP_8BIT)
-040     x *= 2 - b * x;               /* here x*a==1 mod 2**16 */
-041   #endif
-042   #if defined(MP_64BIT) || !(defined(MP_8BIT) || defined(MP_16BIT))
-043     x *= 2 - b * x;               /* here x*a==1 mod 2**32 */
-044   #endif
-045   #ifdef MP_64BIT
-046     x *= 2 - b * x;               /* here x*a==1 mod 2**64 */
-047   #endif
-048   
-049     /* rho = -1/m mod b */
-050     *rho = (((mp_word)1 << ((mp_word) DIGIT_BIT)) - x) & MP_MASK;
-051   
-052     return MP_OKAY;
-053   \}
-054   #endif
-\end{alltt}
-\end{small}
-
-This source code computes the value of $\rho$ required to perform Montgomery reduction.  It has been modified to avoid performing excess
-multiplications when $\beta$ is not the default 28-bits.  
-
-\section{The Diminished Radix Algorithm}
-The Diminished Radix method of modular reduction \cite{DRMET} is a fairly clever technique which can be more efficient than either the Barrett
-or Montgomery methods for certain forms of moduli.  The technique is based on the following simple congruence.
-
-\begin{equation}
-(x \mbox{ mod } n) + k \lfloor x / n \rfloor \equiv x \mbox{ (mod }(n - k)\mbox{)}
-\end{equation}
-
-This observation was used in the MMB \cite{MMB} block cipher to create a diffusion primitive.  It used the fact that if $n = 2^{31}$ and $k=1$ that 
-then a x86 multiplier could produce the 62-bit product and use  the ``shrd'' instruction to perform a double-precision right shift.  The proof
-of the above equation is very simple.  First write $x$ in the product form.
-
-\begin{equation}
-x = qn + r
-\end{equation}
-
-Now reduce both sides modulo $(n - k)$.
-
-\begin{equation}
-x \equiv qk + r  \mbox{ (mod }(n-k)\mbox{)}
-\end{equation}
-
-The variable $n$ reduces modulo $n - k$ to $k$.  By putting $q = \lfloor x/n \rfloor$ and $r = x \mbox{ mod } n$ 
-into the equation the original congruence is reproduced, thus concluding the proof.  The following algorithm is based on this observation.
-
-\begin{figure}[!here]
-\begin{small}
-\begin{center}
-\begin{tabular}{l}
-\hline Algorithm \textbf{Diminished Radix Reduction}. \\
-\textbf{Input}.   Integer $x$, $n$, $k$ \\
-\textbf{Output}.  $x \mbox{ mod } (n - k)$ \\
-\hline \\
-1.  $q \leftarrow \lfloor x / n \rfloor$ \\
-2.  $q \leftarrow k \cdot q$ \\
-3.  $x \leftarrow x \mbox{ (mod }n\mbox{)}$ \\
-4.  $x \leftarrow x + q$ \\
-5.  If $x \ge (n - k)$ then \\
-\hspace{3mm}5.1  $x \leftarrow x - (n - k)$ \\
-\hspace{3mm}5.2  Goto step 1. \\
-6.  Return $x$ \\
-\hline
-\end{tabular}
-\end{center}
-\end{small}
-\caption{Algorithm Diminished Radix Reduction}
-\label{fig:DR}
-\end{figure}
-
-This algorithm will reduce $x$ modulo $n - k$ and return the residue.  If $0 \le x < (n - k)^2$ then the algorithm will loop almost always
-once or twice and occasionally three times.  For simplicity sake the value of $x$ is bounded by the following simple polynomial.
-
-\begin{equation} 
-0 \le x < n^2 + k^2 - 2nk
-\end{equation}
-
-The true bound is  $0 \le x < (n - k - 1)^2$ but this has quite a few more terms.  The value of $q$ after step 1 is bounded by the following.
-
-\begin{equation}
-q < n - 2k - k^2/n
-\end{equation}
-
-Since $k^2$ is going to be considerably smaller than $n$ that term will always be zero.  The value of $x$ after step 3 is bounded trivially as
-$0 \le x < n$.  By step four the sum $x + q$ is bounded by 
-
-\begin{equation}
-0 \le q + x < (k + 1)n - 2k^2 - 1
-\end{equation}
-
-With a second pass $q$ will be loosely bounded by $0 \le q < k^2$ after step 2 while $x$ will still be loosely bounded by $0 \le x < n$ after step 3.  After the second pass it is highly unlike that the
-sum in step 4 will exceed $n - k$.  In practice fewer than three passes of the algorithm are required to reduce virtually every input in the 
-range $0 \le x < (n - k - 1)^2$.  
-
-\begin{figure}
-\begin{small}
-\begin{center}
-\begin{tabular}{|l|}
-\hline
-$x = 123456789, n = 256, k = 3$ \\
-\hline $q \leftarrow \lfloor x/n \rfloor = 482253$ \\
-$q \leftarrow q*k = 1446759$ \\
-$x \leftarrow x \mbox{ mod } n = 21$ \\
-$x \leftarrow x + q = 1446780$ \\
-$x \leftarrow x - (n - k) = 1446527$ \\
-\hline 
-$q \leftarrow \lfloor x/n \rfloor = 5650$ \\
-$q \leftarrow q*k = 16950$ \\
-$x \leftarrow x \mbox{ mod } n = 127$ \\
-$x \leftarrow x + q = 17077$ \\
-$x \leftarrow x - (n - k) = 16824$ \\
-\hline 
-$q \leftarrow \lfloor x/n \rfloor = 65$ \\
-$q \leftarrow q*k = 195$ \\
-$x \leftarrow x \mbox{ mod } n = 184$ \\
-$x \leftarrow x + q = 379$ \\
-$x \leftarrow x - (n - k) = 126$ \\
-\hline
-\end{tabular}
-\end{center}
-\end{small}
-\caption{Example Diminished Radix Reduction}
-\label{fig:EXDR}
-\end{figure}
-
-Figure~\ref{fig:EXDR} demonstrates the reduction of $x = 123456789$ modulo $n - k = 253$ when $n = 256$ and $k = 3$.  Note that even while $x$
-is considerably larger than $(n - k - 1)^2 = 63504$ the algorithm still converges on the modular residue exceedingly fast.  In this case only
-three passes were required to find the residue $x \equiv 126$.
-
-
-\subsection{Choice of Moduli}
-On the surface this algorithm looks like a very expensive algorithm.  It requires a couple of subtractions followed by multiplication and other
-modular reductions.  The usefulness of this algorithm becomes exceedingly clear when an appropriate modulus is chosen.
-
-Division in general is a very expensive operation to perform.  The one exception is when the division is by a power of the radix of representation used.  
-Division by ten for example is simple for pencil and paper mathematics since it amounts to shifting the decimal place to the right.  Similarly division 
-by two (\textit{or powers of two}) is very simple for binary computers to perform.  It would therefore seem logical to choose $n$ of the form $2^p$ 
-which would imply that $\lfloor x / n \rfloor$ is a simple shift of $x$ right $p$ bits.  
-
-However, there is one operation related to division of power of twos that is even faster than this.  If $n = \beta^p$ then the division may be 
-performed by moving whole digits to the right $p$ places.  In practice division by $\beta^p$ is much faster than division by $2^p$ for any $p$.  
-Also with the choice of $n = \beta^p$ reducing $x$ modulo $n$ merely requires zeroing the digits above the $p-1$'th digit of $x$.  
-
-Throughout the next section the term ``restricted modulus'' will refer to a modulus of the form $\beta^p - k$ whereas the term ``unrestricted
-modulus'' will refer to a modulus of the form $2^p - k$.  The word ``restricted'' in this case refers to the fact that it is based on the 
-$2^p$ logic except $p$ must be a multiple of $lg(\beta)$.  
-
-\subsection{Choice of $k$}
-Now that division and reduction (\textit{step 1 and 3 of figure~\ref{fig:DR}}) have been optimized to simple digit operations the multiplication by $k$
-in step 2 is the most expensive operation.  Fortunately the choice of $k$ is not terribly limited.  For all intents and purposes it might
-as well be a single digit.  The smaller the value of $k$ is the faster the algorithm will be.  
-
-\subsection{Restricted Diminished Radix Reduction}
-The restricted Diminished Radix algorithm can quickly reduce an input modulo a modulus of the form $n = \beta^p - k$.  This algorithm can reduce 
-an input $x$ within the range $0 \le x < n^2$ using only a couple passes of the algorithm demonstrated in figure~\ref{fig:DR}.  The implementation
-of this algorithm has been optimized to avoid additional overhead associated with a division by $\beta^p$, the multiplication by $k$ or the addition 
-of $x$ and $q$.  The resulting algorithm is very efficient and can lead to substantial improvements over Barrett and Montgomery reduction when modular 
-exponentiations are performed.
-
-\newpage\begin{figure}[!here]
-\begin{small}
-\begin{center}
-\begin{tabular}{l}
-\hline Algorithm \textbf{mp\_dr\_reduce}. \\
-\textbf{Input}.   mp\_int $x$, $n$ and a mp\_digit $k = \beta - n_0$ \\
-\hspace{11.5mm}($0 \le x < n^2$, $n > 1$, $0 < k < \beta$) \\
-\textbf{Output}.  $x \mbox{ mod } n$ \\
-\hline \\
-1.  $m \leftarrow n.used$ \\
-2.  If $x.alloc < 2m$ then grow $x$ to $2m$ digits. \\
-3.  $\mu \leftarrow 0$ \\
-4.  for $i$ from $0$ to $m - 1$ do \\
-\hspace{3mm}4.1  $\hat r \leftarrow k \cdot x_{m+i} + x_{i} + \mu$ \\
-\hspace{3mm}4.2  $x_{i} \leftarrow \hat r \mbox{ (mod }\beta\mbox{)}$ \\
-\hspace{3mm}4.3  $\mu \leftarrow \lfloor \hat r / \beta \rfloor$ \\
-5.  $x_{m} \leftarrow \mu$ \\
-6.  for $i$ from $m + 1$ to $x.used - 1$ do \\
-\hspace{3mm}6.1  $x_{i} \leftarrow 0$ \\
-7.  Clamp excess digits of $x$. \\
-8.  If $x \ge n$ then \\
-\hspace{3mm}8.1  $x \leftarrow x - n$ \\
-\hspace{3mm}8.2  Goto step 3. \\
-9.  Return(\textit{MP\_OKAY}). \\
-\hline
-\end{tabular}
-\end{center}
-\end{small}
-\caption{Algorithm mp\_dr\_reduce}
-\end{figure}
-
-\textbf{Algorithm mp\_dr\_reduce.}
-This algorithm will perform the Dimished Radix reduction of $x$ modulo $n$.  It has similar restrictions to that of the Barrett reduction
-with the addition that $n$ must be of the form $n = \beta^m - k$ where $0 < k <\beta$.  
-
-This algorithm essentially implements the pseudo-code in figure~\ref{fig:DR} except with a slight optimization.  The division by $\beta^m$, multiplication by $k$
-and addition of $x \mbox{ mod }\beta^m$ are all performed simultaneously inside the loop on step 4.  The division by $\beta^m$ is emulated by accessing
-the term at the $m+i$'th position which is subsequently multiplied by $k$ and added to the term at the $i$'th position.  After the loop the $m$'th
-digit is set to the carry and the upper digits are zeroed.  Steps 5 and 6 emulate the reduction modulo $\beta^m$ that should have happend to 
-$x$ before the addition of the multiple of the upper half.  
-
-At step 8 if $x$ is still larger than $n$ another pass of the algorithm is required.  First $n$ is subtracted from $x$ and then the algorithm resumes
-at step 3.  
-
-\vspace{+3mm}\begin{small}
-\hspace{-5.1mm}{\bf File}: bn\_mp\_dr\_reduce.c
-\vspace{-3mm}
-\begin{alltt}
-016   
-017   /* reduce "x" in place modulo "n" using the Diminished Radix algorithm.
-018    *
-019    * Based on algorithm from the paper
-020    *
-021    * "Generating Efficient Primes for Discrete Log Cryptosystems"
-022    *                 Chae Hoon Lim, Pil Joong Lee,
-023    *          POSTECH Information Research Laboratories
-024    *
-025    * The modulus must be of a special format [see manual]
-026    *
-027    * Has been modified to use algorithm 7.10 from the LTM book instead
-028    *
-029    * Input x must be in the range 0 <= x <= (n-1)**2
-030    */
-031   int
-032   mp_dr_reduce (mp_int * x, mp_int * n, mp_digit k)
-033   \{
-034     int      err, i, m;
-035     mp_word  r;
-036     mp_digit mu, *tmpx1, *tmpx2;
-037   
-038     /* m = digits in modulus */
-039     m = n->used;
-040   
-041     /* ensure that "x" has at least 2m digits */
-042     if (x->alloc < m + m) \{
-043       if ((err = mp_grow (x, m + m)) != MP_OKAY) \{
-044         return err;
-045       \}
-046     \}
-047   
-048   /* top of loop, this is where the code resumes if
-049    * another reduction pass is required.
-050    */
-051   top:
-052     /* aliases for digits */
-053     /* alias for lower half of x */
-054     tmpx1 = x->dp;
-055   
-056     /* alias for upper half of x, or x/B**m */
-057     tmpx2 = x->dp + m;
-058   
-059     /* set carry to zero */
-060     mu = 0;
-061   
-062     /* compute (x mod B**m) + k * [x/B**m] inline and inplace */
-063     for (i = 0; i < m; i++) \{
-064         r         = ((mp_word)*tmpx2++) * ((mp_word)k) + *tmpx1 + mu;
-065         *tmpx1++  = (mp_digit)(r & MP_MASK);
-066         mu        = (mp_digit)(r >> ((mp_word)DIGIT_BIT));
-067     \}
-068   
-069     /* set final carry */
-070     *tmpx1++ = mu;
-071   
-072     /* zero words above m */
-073     for (i = m + 1; i < x->used; i++) \{
-074         *tmpx1++ = 0;
-075     \}
-076   
-077     /* clamp, sub and return */
-078     mp_clamp (x);
-079   
-080     /* if x >= n then subtract and reduce again
-081      * Each successive "recursion" makes the input smaller and smaller.
-082      */
-083     if (mp_cmp_mag (x, n) != MP_LT) \{
-084       s_mp_sub(x, n, x);
-085       goto top;
-086     \}
-087     return MP_OKAY;
-088   \}
-089   #endif
-\end{alltt}
-\end{small}
-
-The first step is to grow $x$ as required to $2m$ digits since the reduction is performed in place on $x$.  The label on line 51 is where
-the algorithm will resume if further reduction passes are required.  In theory it could be placed at the top of the function however, the size of
-the modulus and question of whether $x$ is large enough are invariant after the first pass meaning that it would be a waste of time.  
-
-The aliases $tmpx1$ and $tmpx2$ refer to the digits of $x$ where the latter is offset by $m$ digits.  By reading digits from $x$ offset by $m$ digits
-a division by $\beta^m$ can be simulated virtually for free.  The loop on line 63 performs the bulk of the work (\textit{corresponds to step 4 of algorithm 7.11})
-in this algorithm.
-
-By line 70 the pointer $tmpx1$ points to the $m$'th digit of $x$ which is where the final carry will be placed.  Similarly by line 73 the 
-same pointer will point to the $m+1$'th digit where the zeroes will be placed.  
-
-Since the algorithm is only valid if both $x$ and $n$ are greater than zero an unsigned comparison suffices to determine if another pass is required.  
-With the same logic at line 84 the value of $x$ is known to be greater than or equal to $n$ meaning that an unsigned subtraction can be used
-as well.  Since the destination of the subtraction is the larger of the inputs the call to algorithm s\_mp\_sub cannot fail and the return code
-does not need to be checked.
-
-\subsubsection{Setup}
-To setup the restricted Diminished Radix algorithm the value $k = \beta - n_0$ is required.  This algorithm is not really complicated but provided for
-completeness.
-
-\begin{figure}[!here]
-\begin{small}
-\begin{center}
-\begin{tabular}{l}
-\hline Algorithm \textbf{mp\_dr\_setup}. \\
-\textbf{Input}.   mp\_int $n$ \\
-\textbf{Output}.  $k = \beta - n_0$ \\
-\hline \\
-1.  $k \leftarrow \beta - n_0$ \\
-\hline
-\end{tabular}
-\end{center}
-\end{small}
-\caption{Algorithm mp\_dr\_setup}
-\end{figure}
-
-\vspace{+3mm}\begin{small}
-\hspace{-5.1mm}{\bf File}: bn\_mp\_dr\_setup.c
-\vspace{-3mm}
-\begin{alltt}
-016   
-017   /* determines the setup value */
-018   void mp_dr_setup(mp_int *a, mp_digit *d)
-019   \{
-020      /* the casts are required if DIGIT_BIT is one less than
-021       * the number of bits in a mp_digit [e.g. DIGIT_BIT==31]
-022       */
-023      *d = (mp_digit)((((mp_word)1) << ((mp_word)DIGIT_BIT)) - 
-024           ((mp_word)a->dp[0]));
-025   \}
-026   
-027   #endif
-\end{alltt}
-\end{small}
-
-\subsubsection{Modulus Detection}
-Another algorithm which will be useful is the ability to detect a restricted Diminished Radix modulus.  An integer is said to be
-of restricted Diminished Radix form if all of the digits are equal to $\beta - 1$ except the trailing digit which may be any value.
-
-\begin{figure}[!here]
-\begin{small}
-\begin{center}
-\begin{tabular}{l}
-\hline Algorithm \textbf{mp\_dr\_is\_modulus}. \\
-\textbf{Input}.   mp\_int $n$ \\
-\textbf{Output}.  $1$ if $n$ is in D.R form, $0$ otherwise \\
-\hline
-1.  If $n.used < 2$ then return($0$). \\
-2.  for $ix$ from $1$ to $n.used - 1$ do \\
-\hspace{3mm}2.1  If $n_{ix} \ne \beta - 1$ return($0$). \\
-3.  Return($1$). \\
-\hline
-\end{tabular}
-\end{center}
-\end{small}
-\caption{Algorithm mp\_dr\_is\_modulus}
-\end{figure}
-
-\textbf{Algorithm mp\_dr\_is\_modulus.}
-This algorithm determines if a value is in Diminished Radix form.  Step 1 rejects obvious cases where fewer than two digits are
-in the mp\_int.  Step 2 tests all but the first digit to see if they are equal to $\beta - 1$.  If the algorithm manages to get to
-step 3 then $n$ must be of Diminished Radix form.
-
-\vspace{+3mm}\begin{small}
-\hspace{-5.1mm}{\bf File}: bn\_mp\_dr\_is\_modulus.c
-\vspace{-3mm}
-\begin{alltt}
-016   
-017   /* determines if a number is a valid DR modulus */
-018   int mp_dr_is_modulus(mp_int *a)
-019   \{
-020      int ix;
-021   
-022      /* must be at least two digits */
-023      if (a->used < 2) \{
-024         return 0;
-025      \}
-026   
-027      /* must be of the form b**k - a [a <= b] so all
-028       * but the first digit must be equal to -1 (mod b).
-029       */
-030      for (ix = 1; ix < a->used; ix++) \{
-031          if (a->dp[ix] != MP_MASK) \{
-032             return 0;
-033          \}
-034      \}
-035      return 1;
-036   \}
-037   
-038   #endif
-\end{alltt}
-\end{small}
-
-\subsection{Unrestricted Diminished Radix Reduction}
-The unrestricted Diminished Radix algorithm allows modular reductions to be performed when the modulus is of the form $2^p - k$.  This algorithm
-is a straightforward adaptation of algorithm~\ref{fig:DR}.
-
-In general the restricted Diminished Radix reduction algorithm is much faster since it has considerably lower overhead.  However, this new
-algorithm is much faster than either Montgomery or Barrett reduction when the moduli are of the appropriate form.
-
-\begin{figure}[!here]
-\begin{small}
-\begin{center}
-\begin{tabular}{l}
-\hline Algorithm \textbf{mp\_reduce\_2k}. \\
-\textbf{Input}.   mp\_int $a$ and $n$.  mp\_digit $k$  \\
-\hspace{11.5mm}($a \ge 0$, $n > 1$, $0 < k < \beta$, $n + k$ is a power of two) \\
-\textbf{Output}.  $a \mbox{ (mod }n\mbox{)}$ \\
-\hline
-1.  $p \leftarrow \lceil lg(n) \rceil$  (\textit{mp\_count\_bits}) \\
-2.  While $a \ge n$ do \\
-\hspace{3mm}2.1  $q \leftarrow \lfloor a / 2^p \rfloor$ (\textit{mp\_div\_2d}) \\
-\hspace{3mm}2.2  $a \leftarrow a \mbox{ (mod }2^p\mbox{)}$ (\textit{mp\_mod\_2d}) \\
-\hspace{3mm}2.3  $q \leftarrow q \cdot k$ (\textit{mp\_mul\_d}) \\
-\hspace{3mm}2.4  $a \leftarrow a - q$ (\textit{s\_mp\_sub}) \\
-\hspace{3mm}2.5  If $a \ge n$ then do \\
-\hspace{6mm}2.5.1  $a \leftarrow a - n$ \\
-3.  Return(\textit{MP\_OKAY}). \\
-\hline
-\end{tabular}
-\end{center}
-\end{small}
-\caption{Algorithm mp\_reduce\_2k}
-\end{figure}
-
-\textbf{Algorithm mp\_reduce\_2k.}
-This algorithm quickly reduces an input $a$ modulo an unrestricted Diminished Radix modulus $n$.  Division by $2^p$ is emulated with a right
-shift which makes the algorithm fairly inexpensive to use.  
-
-\vspace{+3mm}\begin{small}
-\hspace{-5.1mm}{\bf File}: bn\_mp\_reduce\_2k.c
-\vspace{-3mm}
-\begin{alltt}
-016   
-017   /* reduces a modulo n where n is of the form 2**p - d */
-018   int mp_reduce_2k(mp_int *a, mp_int *n, mp_digit d)
-019   \{
-020      mp_int q;
-021      int    p, res;
-022      
-023      if ((res = mp_init(&q)) != MP_OKAY) \{
-024         return res;
-025      \}
-026      
-027      p = mp_count_bits(n);    
-028   top:
-029      /* q = a/2**p, a = a mod 2**p */
-030      if ((res = mp_div_2d(a, p, &q, a)) != MP_OKAY) \{
-031         goto ERR;
-032      \}
-033      
-034      if (d != 1) \{
-035         /* q = q * d */
-036         if ((res = mp_mul_d(&q, d, &q)) != MP_OKAY) \{ 
-037            goto ERR;
-038         \}
-039      \}
-040      
-041      /* a = a + q */
-042      if ((res = s_mp_add(a, &q, a)) != MP_OKAY) \{
-043         goto ERR;
-044      \}
-045      
-046      if (mp_cmp_mag(a, n) != MP_LT) \{
-047         s_mp_sub(a, n, a);
-048         goto top;
-049      \}
-050      
-051   ERR:
-052      mp_clear(&q);
-053      return res;
-054   \}
-055   
-056   #endif
-\end{alltt}
-\end{small}
-
-The algorithm mp\_count\_bits calculates the number of bits in an mp\_int which is used to find the initial value of $p$.  The call to mp\_div\_2d
-on line 30 calculates both the quotient $q$ and the remainder $a$ required.  By doing both in a single function call the code size
-is kept fairly small.  The multiplication by $k$ is only performed if $k > 1$. This allows reductions modulo $2^p - 1$ to be performed without
-any multiplications.  
-
-The unsigned s\_mp\_add, mp\_cmp\_mag and s\_mp\_sub are used in place of their full sign counterparts since the inputs are only valid if they are 
-positive.  By using the unsigned versions the overhead is kept to a minimum.  
-
-\subsubsection{Unrestricted Setup}
-To setup this reduction algorithm the value of $k = 2^p - n$ is required.  
-
-\begin{figure}[!here]
-\begin{small}
-\begin{center}
-\begin{tabular}{l}
-\hline Algorithm \textbf{mp\_reduce\_2k\_setup}. \\
-\textbf{Input}.   mp\_int $n$   \\
-\textbf{Output}.  $k = 2^p - n$ \\
-\hline
-1.  $p \leftarrow \lceil lg(n) \rceil$  (\textit{mp\_count\_bits}) \\
-2.  $x \leftarrow 2^p$ (\textit{mp\_2expt}) \\
-3.  $x \leftarrow x - n$ (\textit{mp\_sub}) \\
-4.  $k \leftarrow x_0$ \\
-5.  Return(\textit{MP\_OKAY}). \\
-\hline
-\end{tabular}
-\end{center}
-\end{small}
-\caption{Algorithm mp\_reduce\_2k\_setup}
-\end{figure}
-
-\textbf{Algorithm mp\_reduce\_2k\_setup.}
-This algorithm computes the value of $k$ required for the algorithm mp\_reduce\_2k.  By making a temporary variable $x$ equal to $2^p$ a subtraction
-is sufficient to solve for $k$.  Alternatively if $n$ has more than one digit the value of $k$ is simply $\beta - n_0$.  
-
-\vspace{+3mm}\begin{small}
-\hspace{-5.1mm}{\bf File}: bn\_mp\_reduce\_2k\_setup.c
-\vspace{-3mm}
-\begin{alltt}
-016   
-017   /* determines the setup value */
-018   int mp_reduce_2k_setup(mp_int *a, mp_digit *d)
-019   \{
-020      int res, p;
-021      mp_int tmp;
-022      
-023      if ((res = mp_init(&tmp)) != MP_OKAY) \{
-024         return res;
-025      \}
-026      
-027      p = mp_count_bits(a);
-028      if ((res = mp_2expt(&tmp, p)) != MP_OKAY) \{
-029         mp_clear(&tmp);
-030         return res;
-031      \}
-032      
-033      if ((res = s_mp_sub(&tmp, a, &tmp)) != MP_OKAY) \{
-034         mp_clear(&tmp);
-035         return res;
-036      \}
-037      
-038      *d = tmp.dp[0];
-039      mp_clear(&tmp);
-040      return MP_OKAY;
-041   \}
-042   #endif
-\end{alltt}
-\end{small}
-
-\subsubsection{Unrestricted Detection}
-An integer $n$ is a valid unrestricted Diminished Radix modulus if either of the following are true.
-
-\begin{enumerate}
-\item  The number has only one digit.
-\item  The number has more than one digit and every bit from the $\beta$'th to the most significant is one.
-\end{enumerate}
-
-If either condition is true than there is a power of two $2^p$ such that $0 < 2^p - n < \beta$.   If the input is only
-one digit than it will always be of the correct form.  Otherwise all of the bits above the first digit must be one.  This arises from the fact
-that there will be value of $k$ that when added to the modulus causes a carry in the first digit which propagates all the way to the most
-significant bit.  The resulting sum will be a power of two.
-
-\begin{figure}[!here]
-\begin{small}
-\begin{center}
-\begin{tabular}{l}
-\hline Algorithm \textbf{mp\_reduce\_is\_2k}. \\
-\textbf{Input}.   mp\_int $n$   \\
-\textbf{Output}.  $1$ if of proper form, $0$ otherwise \\
-\hline
-1.  If $n.used = 0$ then return($0$). \\
-2.  If $n.used = 1$ then return($1$). \\
-3.  $p \leftarrow \lceil lg(n) \rceil$  (\textit{mp\_count\_bits}) \\
-4.  for $x$ from $lg(\beta)$ to $p$ do \\
-\hspace{3mm}4.1  If the ($x \mbox{ mod }lg(\beta)$)'th bit of the $\lfloor x / lg(\beta) \rfloor$ of $n$ is zero then return($0$). \\
-5.  Return($1$). \\
-\hline
-\end{tabular}
-\end{center}
-\end{small}
-\caption{Algorithm mp\_reduce\_is\_2k}
-\end{figure}
-
-\textbf{Algorithm mp\_reduce\_is\_2k.}
-This algorithm quickly determines if a modulus is of the form required for algorithm mp\_reduce\_2k to function properly.  
-
-\vspace{+3mm}\begin{small}
-\hspace{-5.1mm}{\bf File}: bn\_mp\_reduce\_is\_2k.c
-\vspace{-3mm}
-\begin{alltt}
-016   
-017   /* determines if mp_reduce_2k can be used */
-018   int mp_reduce_is_2k(mp_int *a)
-019   \{
-020      int ix, iy, iw;
-021      mp_digit iz;
-022      
-023      if (a->used == 0) \{
-024         return MP_NO;
-025      \} else if (a->used == 1) \{
-026         return MP_YES;
-027      \} else if (a->used > 1) \{
-028         iy = mp_count_bits(a);
-029         iz = 1;
-030         iw = 1;
-031       
-032         /* Test every bit from the second digit up, must be 1 */
-033         for (ix = DIGIT_BIT; ix < iy; ix++) \{
-034             if ((a->dp[iw] & iz) == 0) \{
-035                return MP_NO;
-036             \}
-037             iz <<= 1;
-038             if (iz > (mp_digit)MP_MASK) \{
-039                ++iw;
-040                iz = 1;
-041             \}
-042         \}
-043      \}
-044      return MP_YES;
-045   \}
-046   
-047   #endif
-\end{alltt}
-\end{small}
-
-
-
-\section{Algorithm Comparison}
-So far three very different algorithms for modular reduction have been discussed.  Each of the algorithms have their own strengths and weaknesses
-that makes having such a selection very useful.  The following table sumarizes the three algorithms along with comparisons of work factors.  Since
-all three algorithms have the restriction that $0 \le x < n^2$ and $n > 1$ those limitations are not included in the table.  
-
-\begin{center}
-\begin{small}
-\begin{tabular}{|c|c|c|c|c|c|}
-\hline \textbf{Method} & \textbf{Work Required} & \textbf{Limitations} & \textbf{$m = 8$} & \textbf{$m = 32$} & \textbf{$m = 64$} \\
-\hline Barrett    & $m^2 + 2m - 1$ & None              & $79$ & $1087$ & $4223$ \\
-\hline Montgomery & $m^2 + m$      & $n$ must be odd   & $72$ & $1056$ & $4160$ \\
-\hline D.R.       & $2m$           & $n = \beta^m - k$ & $16$ & $64$   & $128$  \\
-\hline
-\end{tabular}
-\end{small}
-\end{center}
-
-In theory Montgomery and Barrett reductions would require roughly the same amount of time to complete.  However, in practice since Montgomery
-reduction can be written as a single function with the Comba technique it is much faster.  Barrett reduction suffers from the overhead of
-calling the half precision multipliers, addition and division by $\beta$ algorithms.
-
-For almost every cryptographic algorithm Montgomery reduction is the algorithm of choice.  The one set of algorithms where Diminished Radix reduction truly
-shines are based on the discrete logarithm problem such as Diffie-Hellman \cite{DH} and ElGamal \cite{ELGAMAL}.  In these algorithms
-primes of the form $\beta^m - k$ can be found and shared amongst users.  These primes will allow the Diminished Radix algorithm to be used in
-modular exponentiation to greatly speed up the operation.
-
-
-
-\section*{Exercises}
-\begin{tabular}{cl}
-$\left [ 3 \right ]$ & Prove that the ``trick'' in algorithm mp\_montgomery\_setup actually \\
-                     & calculates the correct value of $\rho$. \\
-                     & \\
-$\left [ 2 \right ]$ & Devise an algorithm to reduce modulo $n + k$ for small $k$ quickly.  \\
-                     & \\
-$\left [ 4 \right ]$ & Prove that the pseudo-code algorithm ``Diminished Radix Reduction'' \\
-                     & (\textit{figure~\ref{fig:DR}}) terminates.  Also prove the probability that it will \\
-                     & terminate within $1 \le k \le 10$ iterations. \\
-                     & \\
-\end{tabular}                     
-
-
-\chapter{Exponentiation}
-Exponentiation is the operation of raising one variable to the power of another, for example, $a^b$.  A variant of exponentiation, computed
-in a finite field or ring, is called modular exponentiation.  This latter style of operation is typically used in public key 
-cryptosystems such as RSA and Diffie-Hellman.  The ability to quickly compute modular exponentiations is of great benefit to any
-such cryptosystem and many methods have been sought to speed it up.
-
-\section{Exponentiation Basics}
-A trivial algorithm would simply multiply $a$ against itself $b - 1$ times to compute the exponentiation desired.  However, as $b$ grows in size
-the number of multiplications becomes prohibitive.  Imagine what would happen if $b$ $\approx$ $2^{1024}$ as is the case when computing an RSA signature
-with a $1024$-bit key.  Such a calculation could never be completed as it would take simply far too long.
-
-Fortunately there is a very simple algorithm based on the laws of exponents.  Recall that $lg_a(a^b) = b$ and that $lg_a(a^ba^c) = b + c$ which
-are two trivial relationships between the base and the exponent.  Let $b_i$ represent the $i$'th bit of $b$ starting from the least 
-significant bit.  If $b$ is a $k$-bit integer than the following equation is true.
-
-\begin{equation}
-a^b = \prod_{i=0}^{k-1} a^{2^i \cdot b_i}
-\end{equation}
-
-By taking the base $a$ logarithm of both sides of the equation the following equation is the result.
-
-\begin{equation}
-b = \sum_{i=0}^{k-1}2^i \cdot b_i
-\end{equation}
-
-The term $a^{2^i}$ can be found from the $i - 1$'th term by squaring the term since $\left ( a^{2^i} \right )^2$ is equal to
-$a^{2^{i+1}}$.  This observation forms the basis of essentially all fast exponentiation algorithms.  It requires $k$ squarings and on average
-$k \over 2$ multiplications to compute the result.  This is indeed quite an improvement over simply multiplying by $a$ a total of $b-1$ times.
-
-While this current method is a considerable speed up there are further improvements to be made.  For example, the $a^{2^i}$ term does not need to 
-be computed in an auxilary variable.  Consider the following equivalent algorithm.
-
-\begin{figure}[!here]
-\begin{small}
-\begin{center}
-\begin{tabular}{l}
-\hline Algorithm \textbf{Left to Right Exponentiation}. \\
-\textbf{Input}.   Integer $a$, $b$ and $k$ \\
-\textbf{Output}.  $c = a^b$ \\
-\hline \\
-1.  $c \leftarrow 1$ \\
-2.  for $i$ from $k - 1$ to $0$ do \\
-\hspace{3mm}2.1  $c \leftarrow c^2$ \\
-\hspace{3mm}2.2  $c \leftarrow c \cdot a^{b_i}$ \\
-3.  Return $c$. \\
-\hline
-\end{tabular}
-\end{center}
-\end{small}
-\caption{Left to Right Exponentiation}
-\label{fig:LTOR}
-\end{figure}
-
-This algorithm starts from the most significant bit and works towards the least significant bit.  When the $i$'th bit of $b$ is set $a$ is
-multiplied against the current product.  In each iteration the product is squared which doubles the exponent of the individual terms of the
-product.  
-
-For example, let $b = 101100_2 \equiv 44_{10}$.  The following chart demonstrates the actions of the algorithm.
-
-\newpage\begin{figure}
-\begin{center}
-\begin{tabular}{|c|c|}
-\hline \textbf{Value of $i$} & \textbf{Value of $c$} \\
-\hline - & $1$ \\
-\hline $5$ & $a$ \\
-\hline $4$ & $a^2$ \\
-\hline $3$ & $a^4 \cdot a$ \\
-\hline $2$ & $a^8 \cdot a^2 \cdot a$ \\
-\hline $1$ & $a^{16} \cdot a^4 \cdot a^2$ \\
-\hline $0$ & $a^{32} \cdot a^8 \cdot a^4$ \\
-\hline
-\end{tabular}
-\end{center}
-\caption{Example of Left to Right Exponentiation}
-\end{figure}
-
-When the product $a^{32} \cdot a^8 \cdot a^4$ is simplified it is equal $a^{44}$ which is the desired exponentiation.  This particular algorithm is 
-called ``Left to Right'' because it reads the exponent in that order.  All of the exponentiation algorithms that will be presented are of this nature.  
-
-\subsection{Single Digit Exponentiation}
-The first algorithm in the series of exponentiation algorithms will be an unbounded algorithm where the exponent is a single digit.  It is intended 
-to be used when a small power of an input is required (\textit{e.g. $a^5$}).  It is faster than simply multiplying $b - 1$ times for all values of 
-$b$ that are greater than three.  
-
-\newpage\begin{figure}[!here]
-\begin{small}
-\begin{center}
-\begin{tabular}{l}
-\hline Algorithm \textbf{mp\_expt\_d}. \\
-\textbf{Input}.   mp\_int $a$ and mp\_digit $b$ \\
-\textbf{Output}.  $c = a^b$ \\
-\hline \\
-1.  $g \leftarrow a$ (\textit{mp\_init\_copy}) \\
-2.  $c \leftarrow 1$ (\textit{mp\_set}) \\
-3.  for $x$ from 1 to $lg(\beta)$ do \\
-\hspace{3mm}3.1  $c \leftarrow c^2$ (\textit{mp\_sqr}) \\
-\hspace{3mm}3.2  If $b$ AND $2^{lg(\beta) - 1} \ne 0$ then \\
-\hspace{6mm}3.2.1  $c \leftarrow c \cdot g$ (\textit{mp\_mul}) \\
-\hspace{3mm}3.3  $b \leftarrow b << 1$ \\
-4.  Clear $g$. \\
-5.  Return(\textit{MP\_OKAY}). \\
-\hline
-\end{tabular}
-\end{center}
-\end{small}
-\caption{Algorithm mp\_expt\_d}
-\end{figure}
-
-\textbf{Algorithm mp\_expt\_d.}
-This algorithm computes the value of $a$ raised to the power of a single digit $b$.  It uses the left to right exponentiation algorithm to
-quickly compute the exponentiation.  It is loosely based on algorithm 14.79 of HAC \cite[pp. 615]{HAC} with the difference that the 
-exponent is a fixed width.  
-
-A copy of $a$ is made first to allow destination variable $c$ be the same as the source variable $a$.  The result is set to the initial value of 
-$1$ in the subsequent step.
-
-Inside the loop the exponent is read from the most significant bit first down to the least significant bit.  First $c$ is invariably squared
-on step 3.1.  In the following step if the most significant bit of $b$ is one the copy of $a$ is multiplied against $c$.  The value
-of $b$ is shifted left one bit to make the next bit down from the most signficant bit the new most significant bit.  In effect each
-iteration of the loop moves the bits of the exponent $b$ upwards to the most significant location.
-
-\vspace{+3mm}\begin{small}
-\hspace{-5.1mm}{\bf File}: bn\_mp\_expt\_d.c
-\vspace{-3mm}
-\begin{alltt}
-016   
-017   /* calculate c = a**b  using a square-multiply algorithm */
-018   int mp_expt_d (mp_int * a, mp_digit b, mp_int * c)
-019   \{
-020     int     res, x;
-021     mp_int  g;
-022   
-023     if ((res = mp_init_copy (&g, a)) != MP_OKAY) \{
-024       return res;
-025     \}
-026   
-027     /* set initial result */
-028     mp_set (c, 1);
-029   
-030     for (x = 0; x < (int) DIGIT_BIT; x++) \{
-031       /* square */
-032       if ((res = mp_sqr (c, c)) != MP_OKAY) \{
-033         mp_clear (&g);
-034         return res;
-035       \}
-036   
-037       /* if the bit is set multiply */
-038       if ((b & (mp_digit) (((mp_digit)1) << (DIGIT_BIT - 1))) != 0) \{
-039         if ((res = mp_mul (c, &g, c)) != MP_OKAY) \{
-040            mp_clear (&g);
-041            return res;
-042         \}
-043       \}
-044   
-045       /* shift to next bit */
-046       b <<= 1;
-047     \}
-048   
-049     mp_clear (&g);
-050     return MP_OKAY;
-051   \}
-052   #endif
-\end{alltt}
-\end{small}
-
-Line 28 sets the initial value of the result to $1$.  Next the loop on line 30 steps through each bit of the exponent starting from
-the most significant down towards the least significant. The invariant squaring operation placed on line 32 is performed first.  After 
-the squaring the result $c$ is multiplied by the base $g$ if and only if the most significant bit of the exponent is set.  The shift on line
-46 moves all of the bits of the exponent upwards towards the most significant location.  
-
-\section{$k$-ary Exponentiation}
-When calculating an exponentiation the most time consuming bottleneck is the multiplications which are in general a small factor
-slower than squaring.  Recall from the previous algorithm that $b_{i}$ refers to the $i$'th bit of the exponent $b$.  Suppose instead it referred to
-the $i$'th $k$-bit digit of the exponent of $b$.  For $k = 1$ the definitions are synonymous and for $k > 1$ algorithm~\ref{fig:KARY}
-computes the same exponentiation.  A group of $k$ bits from the exponent is called a \textit{window}.  That is it is a small window on only a
-portion of the entire exponent.  Consider the following modification to the basic left to right exponentiation algorithm.
-
-\begin{figure}[!here]
-\begin{small}
-\begin{center}
-\begin{tabular}{l}
-\hline Algorithm \textbf{$k$-ary Exponentiation}. \\
-\textbf{Input}.   Integer $a$, $b$, $k$ and $t$ \\
-\textbf{Output}.  $c = a^b$ \\
-\hline \\
-1.  $c \leftarrow 1$ \\
-2.  for $i$ from $t - 1$ to $0$ do \\
-\hspace{3mm}2.1  $c \leftarrow c^{2^k} $ \\
-\hspace{3mm}2.2  Extract the $i$'th $k$-bit word from $b$ and store it in $g$. \\
-\hspace{3mm}2.3  $c \leftarrow c \cdot a^g$ \\
-3.  Return $c$. \\
-\hline
-\end{tabular}
-\end{center}
-\end{small}
-\caption{$k$-ary Exponentiation}
-\label{fig:KARY}
-\end{figure}
-
-The squaring on step 2.1 can be calculated by squaring the value $c$ successively $k$ times.  If the values of $a^g$ for $0 < g < 2^k$ have been
-precomputed this algorithm requires only $t$ multiplications and $tk$ squarings.  The table can be generated with $2^{k - 1} - 1$ squarings and
-$2^{k - 1} + 1$ multiplications.  This algorithm assumes that the number of bits in the exponent is evenly divisible by $k$.  
-However, when it is not the remaining $0 < x \le k - 1$ bits can be handled with algorithm~\ref{fig:LTOR}.
-
-Suppose $k = 4$ and $t = 100$.  This modified algorithm will require $109$ multiplications and $408$ squarings to compute the exponentiation.  The
-original algorithm would on average have required $200$ multiplications and $400$ squrings to compute the same value.  The total number of squarings
-has increased slightly but the number of multiplications has nearly halved.
-
-\subsection{Optimal Values of $k$}
-An optimal value of $k$ will minimize $2^{k} + \lceil n / k \rceil + n - 1$ for a fixed number of bits in the exponent $n$.  The simplest
-approach is to brute force search amongst the values $k = 2, 3, \ldots, 8$ for the lowest result.  Table~\ref{fig:OPTK} lists optimal values of $k$
-for various exponent sizes and compares the number of multiplication and squarings required against algorithm~\ref{fig:LTOR}.  
-
-\begin{figure}[here]
-\begin{center}
-\begin{small}
-\begin{tabular}{|c|c|c|c|c|c|}
-\hline \textbf{Exponent (bits)} & \textbf{Optimal $k$} & \textbf{Work at $k$} & \textbf{Work with ~\ref{fig:LTOR}} \\
-\hline $16$ & $2$ & $27$ & $24$ \\
-\hline $32$ & $3$ & $49$ & $48$ \\
-\hline $64$ & $3$ & $92$ & $96$ \\
-\hline $128$ & $4$ & $175$ & $192$ \\
-\hline $256$ & $4$ & $335$ & $384$ \\
-\hline $512$ & $5$ & $645$ & $768$ \\
-\hline $1024$ & $6$ & $1257$ & $1536$ \\
-\hline $2048$ & $6$ & $2452$ & $3072$ \\
-\hline $4096$ & $7$ & $4808$ & $6144$ \\
-\hline
-\end{tabular}
-\end{small}
-\end{center}
-\caption{Optimal Values of $k$ for $k$-ary Exponentiation}
-\label{fig:OPTK}
-\end{figure}
-
-\subsection{Sliding-Window Exponentiation}
-A simple modification to the previous algorithm is only generate the upper half of the table in the range $2^{k-1} \le g < 2^k$.  Essentially
-this is a table for all values of $g$ where the most significant bit of $g$ is a one.  However, in order for this to be allowed in the 
-algorithm values of $g$ in the range $0 \le g < 2^{k-1}$ must be avoided.  
-
-Table~\ref{fig:OPTK2} lists optimal values of $k$ for various exponent sizes and compares the work required against algorithm~\ref{fig:KARY}.  
-
-\begin{figure}[here]
-\begin{center}
-\begin{small}
-\begin{tabular}{|c|c|c|c|c|c|}
-\hline \textbf{Exponent (bits)} & \textbf{Optimal $k$} & \textbf{Work at $k$} & \textbf{Work with ~\ref{fig:KARY}} \\
-\hline $16$ & $3$ & $24$ & $27$ \\
-\hline $32$ & $3$ & $45$ & $49$ \\
-\hline $64$ & $4$ & $87$ & $92$ \\
-\hline $128$ & $4$ & $167$ & $175$ \\
-\hline $256$ & $5$ & $322$ & $335$ \\
-\hline $512$ & $6$ & $628$ & $645$ \\
-\hline $1024$ & $6$ & $1225$ & $1257$ \\
-\hline $2048$ & $7$ & $2403$ & $2452$ \\
-\hline $4096$ & $8$ & $4735$ & $4808$ \\
-\hline
-\end{tabular}
-\end{small}
-\end{center}
-\caption{Optimal Values of $k$ for Sliding Window Exponentiation}
-\label{fig:OPTK2}
-\end{figure}
-
-\newpage\begin{figure}[!here]
-\begin{small}
-\begin{center}
-\begin{tabular}{l}
-\hline Algorithm \textbf{Sliding Window $k$-ary Exponentiation}. \\
-\textbf{Input}.   Integer $a$, $b$, $k$ and $t$ \\
-\textbf{Output}.  $c = a^b$ \\
-\hline \\
-1.  $c \leftarrow 1$ \\
-2.  for $i$ from $t - 1$ to $0$ do \\
-\hspace{3mm}2.1  If the $i$'th bit of $b$ is a zero then \\
-\hspace{6mm}2.1.1   $c \leftarrow c^2$ \\
-\hspace{3mm}2.2  else do \\
-\hspace{6mm}2.2.1  $c \leftarrow c^{2^k}$ \\
-\hspace{6mm}2.2.2  Extract the $k$ bits from $(b_{i}b_{i-1}\ldots b_{i-(k-1)})$ and store it in $g$. \\
-\hspace{6mm}2.2.3  $c \leftarrow c \cdot a^g$ \\
-\hspace{6mm}2.2.4  $i \leftarrow i - k$ \\
-3.  Return $c$. \\
-\hline
-\end{tabular}
-\end{center}
-\end{small}
-\caption{Sliding Window $k$-ary Exponentiation}
-\end{figure}
-
-Similar to the previous algorithm this algorithm must have a special handler when fewer than $k$ bits are left in the exponent.  While this
-algorithm requires the same number of squarings it can potentially have fewer multiplications.  The pre-computed table $a^g$ is also half
-the size as the previous table.  
-
-Consider the exponent $b = 111101011001000_2 \equiv 31432_{10}$ with $k = 3$ using both algorithms.  The first algorithm will divide the exponent up as 
-the following five $3$-bit words $b \equiv \left ( 111, 101, 011, 001, 000 \right )_{2}$.  The second algorithm will break the 
-exponent as $b \equiv \left ( 111, 101, 0, 110, 0, 100, 0 \right )_{2}$.  The single digit $0$ in the second representation are where
-a single squaring took place instead of a squaring and multiplication.  In total the first method requires $10$ multiplications and $18$ 
-squarings.  The second method requires $8$ multiplications and $18$ squarings.  
-
-In general the sliding window method is never slower than the generic $k$-ary method and often it is slightly faster.  
-
-\section{Modular Exponentiation}
-
-Modular exponentiation is essentially computing the power of a base within a finite field or ring.  For example, computing 
-$d \equiv a^b \mbox{ (mod }c\mbox{)}$ is a modular exponentiation.  Instead of first computing $a^b$ and then reducing it 
-modulo $c$ the intermediate result is reduced modulo $c$ after every squaring or multiplication operation.  
-
-This guarantees that any intermediate result is bounded by $0 \le d \le c^2 - 2c + 1$ and can be reduced modulo $c$ quickly using
-one of the algorithms presented in chapter six.  
-
-Before the actual modular exponentiation algorithm can be written a wrapper algorithm must be written first.  This algorithm
-will allow the exponent $b$ to be negative which is computed as $c \equiv \left (1 / a \right )^{\vert b \vert} \mbox{(mod }d\mbox{)}$. The
-value of $(1/a) \mbox{ mod }c$ is computed using the modular inverse (\textit{see \ref{sec;modinv}}).  If no inverse exists the algorithm
-terminates with an error.  
-
-\begin{figure}[!here]
-\begin{small}
-\begin{center}
-\begin{tabular}{l}
-\hline Algorithm \textbf{mp\_exptmod}. \\
-\textbf{Input}.   mp\_int $a$, $b$ and $c$ \\
-\textbf{Output}.  $y \equiv g^x \mbox{ (mod }p\mbox{)}$ \\
-\hline \\
-1.  If $c.sign = MP\_NEG$ return(\textit{MP\_VAL}). \\
-2.  If $b.sign = MP\_NEG$ then \\
-\hspace{3mm}2.1  $g' \leftarrow g^{-1} \mbox{ (mod }c\mbox{)}$ \\
-\hspace{3mm}2.2  $x' \leftarrow \vert x \vert$ \\
-\hspace{3mm}2.3  Compute $d \equiv g'^{x'} \mbox{ (mod }c\mbox{)}$ via recursion. \\
-3.  if $p$ is odd \textbf{OR} $p$ is a D.R. modulus then \\
-\hspace{3mm}3.1  Compute $y \equiv g^{x} \mbox{ (mod }p\mbox{)}$ via algorithm mp\_exptmod\_fast. \\
-4.  else \\
-\hspace{3mm}4.1  Compute $y \equiv g^{x} \mbox{ (mod }p\mbox{)}$ via algorithm s\_mp\_exptmod. \\
-\hline
-\end{tabular}
-\end{center}
-\end{small}
-\caption{Algorithm mp\_exptmod}
-\end{figure}
-
-\textbf{Algorithm mp\_exptmod.}
-The first algorithm which actually performs modular exponentiation is algorithm s\_mp\_exptmod.  It is a sliding window $k$-ary algorithm 
-which uses Barrett reduction to reduce the product modulo $p$.  The second algorithm mp\_exptmod\_fast performs the same operation 
-except it uses either Montgomery or Diminished Radix reduction.  The two latter reduction algorithms are clumped in the same exponentiation
-algorithm since their arguments are essentially the same (\textit{two mp\_ints and one mp\_digit}).  
-
-\vspace{+3mm}\begin{small}
-\hspace{-5.1mm}{\bf File}: bn\_mp\_exptmod.c
-\vspace{-3mm}
-\begin{alltt}
-016   
-017   
-018   /* this is a shell function that calls either the normal or Montgomery
-019    * exptmod functions.  Originally the call to the montgomery code was
-020    * embedded in the normal function but that wasted alot of stack space
-021    * for nothing (since 99% of the time the Montgomery code would be called)
-022    */
-023   int mp_exptmod (mp_int * G, mp_int * X, mp_int * P, mp_int * Y)
-024   \{
-025     int dr;
-026   
-027     /* modulus P must be positive */
-028     if (P->sign == MP_NEG) \{
-029        return MP_VAL;
-030     \}
-031   
-032     /* if exponent X is negative we have to recurse */
-033     if (X->sign == MP_NEG) \{
-034   #ifdef BN_MP_INVMOD_C
-035        mp_int tmpG, tmpX;
-036        int err;
-037   
-038        /* first compute 1/G mod P */
-039        if ((err = mp_init(&tmpG)) != MP_OKAY) \{
-040           return err;
-041        \}
-042        if ((err = mp_invmod(G, P, &tmpG)) != MP_OKAY) \{
-043           mp_clear(&tmpG);
-044           return err;
-045        \}
-046   
-047        /* now get |X| */
-048        if ((err = mp_init(&tmpX)) != MP_OKAY) \{
-049           mp_clear(&tmpG);
-050           return err;
-051        \}
-052        if ((err = mp_abs(X, &tmpX)) != MP_OKAY) \{
-053           mp_clear_multi(&tmpG, &tmpX, NULL);
-054           return err;
-055        \}
-056   
-057        /* and now compute (1/G)**|X| instead of G**X [X < 0] */
-058        err = mp_exptmod(&tmpG, &tmpX, P, Y);
-059        mp_clear_multi(&tmpG, &tmpX, NULL);
-060        return err;
-061   #else 
-062        /* no invmod */
-063        return MP_VAL;
-064   #endif
-065     \}
-066   
-067   /* modified diminished radix reduction */
-068   #if defined(BN_MP_REDUCE_IS_2K_L_C) && defined(BN_MP_REDUCE_2K_L_C)
-069     if (mp_reduce_is_2k_l(P) == MP_YES) \{
-070        return s_mp_exptmod(G, X, P, Y, 1);
-071     \}
-072   #endif
-073   
-074   #ifdef BN_MP_DR_IS_MODULUS_C
-075     /* is it a DR modulus? */
-076     dr = mp_dr_is_modulus(P);
-077   #else
-078     /* default to no */
-079     dr = 0;
-080   #endif
-081   
-082   #ifdef BN_MP_REDUCE_IS_2K_C
-083     /* if not, is it a unrestricted DR modulus? */
-084     if (dr == 0) \{
-085        dr = mp_reduce_is_2k(P) << 1;
-086     \}
-087   #endif
-088       
-089     /* if the modulus is odd or dr != 0 use the montgomery method */
-090   #ifdef BN_MP_EXPTMOD_FAST_C
-091     if (mp_isodd (P) == 1 || dr !=  0) \{
-092       return mp_exptmod_fast (G, X, P, Y, dr);
-093     \} else \{
-094   #endif
-095   #ifdef BN_S_MP_EXPTMOD_C
-096       /* otherwise use the generic Barrett reduction technique */
-097       return s_mp_exptmod (G, X, P, Y, 0);
-098   #else
-099       /* no exptmod for evens */
-100       return MP_VAL;
-101   #endif
-102   #ifdef BN_MP_EXPTMOD_FAST_C
-103     \}
-104   #endif
-105   \}
-106   
-107   #endif
-\end{alltt}
-\end{small}
-
-In order to keep the algorithms in a known state the first step on line 28 is to reject any negative modulus as input.  If the exponent is
-negative the algorithm tries to perform a modular exponentiation with the modular inverse of the base $G$.  The temporary variable $tmpG$ is assigned
-the modular inverse of $G$ and $tmpX$ is assigned the absolute value of $X$.  The algorithm will recuse with these new values with a positive
-exponent.
-
-If the exponent is positive the algorithm resumes the exponentiation.  Line 76 determines if the modulus is of the restricted Diminished Radix 
-form.  If it is not line 69 attempts to determine if it is of a unrestricted Diminished Radix form.  The integer $dr$ will take on one
-of three values.
-
-\begin{enumerate}
-\item $dr = 0$ means that the modulus is not of either restricted or unrestricted Diminished Radix form.
-\item $dr = 1$ means that the modulus is of restricted Diminished Radix form.
-\item $dr = 2$ means that the modulus is of unrestricted Diminished Radix form.
-\end{enumerate}
-
-Line 69 determines if the fast modular exponentiation algorithm can be used.  It is allowed if $dr \ne 0$ or if the modulus is odd.  Otherwise,
-the slower s\_mp\_exptmod algorithm is used which uses Barrett reduction.  
-
-\subsection{Barrett Modular Exponentiation}
-
-\newpage\begin{figure}[!here]
-\begin{small}
-\begin{center}
-\begin{tabular}{l}
-\hline Algorithm \textbf{s\_mp\_exptmod}. \\
-\textbf{Input}.   mp\_int $a$, $b$ and $c$ \\
-\textbf{Output}.  $y \equiv g^x \mbox{ (mod }p\mbox{)}$ \\
-\hline \\
-1.  $k \leftarrow lg(x)$ \\
-2.  $winsize \leftarrow  \left \lbrace \begin{array}{ll}
-                              2 &  \mbox{if }k \le 7 \\
-                              3 &  \mbox{if }7 < k \le 36 \\
-                              4 &  \mbox{if }36 < k \le 140 \\
-                              5 &  \mbox{if }140 < k \le 450 \\
-                              6 &  \mbox{if }450 < k \le 1303 \\
-                              7 &  \mbox{if }1303 < k \le 3529 \\
-                              8 &  \mbox{if }3529 < k \\
-                              \end{array} \right .$ \\
-3.  Initialize $2^{winsize}$ mp\_ints in an array named $M$ and one mp\_int named $\mu$ \\
-4.  Calculate the $\mu$ required for Barrett Reduction (\textit{mp\_reduce\_setup}). \\
-5.  $M_1 \leftarrow g \mbox{ (mod }p\mbox{)}$ \\
-\\
-Setup the table of small powers of $g$.  First find $g^{2^{winsize}}$ and then all multiples of it. \\
-6.  $k \leftarrow 2^{winsize - 1}$ \\
-7.  $M_{k} \leftarrow M_1$ \\
-8.  for $ix$ from 0 to $winsize - 2$ do \\
-\hspace{3mm}8.1  $M_k \leftarrow \left ( M_k \right )^2$ (\textit{mp\_sqr})  \\
-\hspace{3mm}8.2  $M_k \leftarrow M_k \mbox{ (mod }p\mbox{)}$ (\textit{mp\_reduce}) \\
-9.  for $ix$ from $2^{winsize - 1} + 1$ to $2^{winsize} - 1$ do \\
-\hspace{3mm}9.1  $M_{ix} \leftarrow M_{ix - 1} \cdot M_{1}$ (\textit{mp\_mul}) \\
-\hspace{3mm}9.2  $M_{ix} \leftarrow M_{ix} \mbox{ (mod }p\mbox{)}$ (\textit{mp\_reduce}) \\
-10.  $res \leftarrow 1$ \\
-\\
-Start Sliding Window. \\
-11.  $mode \leftarrow 0, bitcnt \leftarrow 1, buf \leftarrow 0, digidx \leftarrow x.used - 1, bitcpy \leftarrow 0, bitbuf \leftarrow 0$ \\
-12.  Loop \\
-\hspace{3mm}12.1  $bitcnt \leftarrow bitcnt - 1$ \\
-\hspace{3mm}12.2  If $bitcnt = 0$ then do \\
-\hspace{6mm}12.2.1  If $digidx = -1$ goto step 13. \\
-\hspace{6mm}12.2.2  $buf \leftarrow x_{digidx}$ \\
-\hspace{6mm}12.2.3  $digidx \leftarrow digidx - 1$ \\
-\hspace{6mm}12.2.4  $bitcnt \leftarrow lg(\beta)$ \\
-Continued on next page. \\
-\hline
-\end{tabular}
-\end{center}
-\end{small}
-\caption{Algorithm s\_mp\_exptmod}
-\end{figure}
-
-\newpage\begin{figure}[!here]
-\begin{small}
-\begin{center}
-\begin{tabular}{l}
-\hline Algorithm \textbf{s\_mp\_exptmod} (\textit{continued}). \\
-\textbf{Input}.   mp\_int $a$, $b$ and $c$ \\
-\textbf{Output}.  $y \equiv g^x \mbox{ (mod }p\mbox{)}$ \\
-\hline \\
-\hspace{3mm}12.3  $y \leftarrow (buf >> (lg(\beta) - 1))$ AND $1$ \\
-\hspace{3mm}12.4  $buf \leftarrow buf << 1$ \\
-\hspace{3mm}12.5  if $mode = 0$ and $y = 0$ then goto step 12. \\
-\hspace{3mm}12.6  if $mode = 1$ and $y = 0$ then do \\
-\hspace{6mm}12.6.1  $res \leftarrow res^2$ \\
-\hspace{6mm}12.6.2  $res \leftarrow res \mbox{ (mod }p\mbox{)}$ \\
-\hspace{6mm}12.6.3  Goto step 12. \\
-\hspace{3mm}12.7  $bitcpy \leftarrow bitcpy + 1$ \\
-\hspace{3mm}12.8  $bitbuf \leftarrow bitbuf + (y << (winsize - bitcpy))$ \\
-\hspace{3mm}12.9  $mode \leftarrow 2$ \\
-\hspace{3mm}12.10  If $bitcpy = winsize$ then do \\
-\hspace{6mm}Window is full so perform the squarings and single multiplication. \\
-\hspace{6mm}12.10.1  for $ix$ from $0$ to $winsize -1$ do \\
-\hspace{9mm}12.10.1.1  $res \leftarrow res^2$ \\
-\hspace{9mm}12.10.1.2  $res \leftarrow res \mbox{ (mod }p\mbox{)}$ \\
-\hspace{6mm}12.10.2  $res \leftarrow res \cdot M_{bitbuf}$ \\
-\hspace{6mm}12.10.3  $res \leftarrow res \mbox{ (mod }p\mbox{)}$ \\
-\hspace{6mm}Reset the window. \\
-\hspace{6mm}12.10.4  $bitcpy \leftarrow 0, bitbuf \leftarrow 0, mode \leftarrow 1$ \\
-\\
-No more windows left.  Check for residual bits of exponent. \\
-13.  If $mode = 2$ and $bitcpy > 0$ then do \\
-\hspace{3mm}13.1  for $ix$ form $0$ to $bitcpy - 1$ do \\
-\hspace{6mm}13.1.1  $res \leftarrow res^2$ \\
-\hspace{6mm}13.1.2  $res \leftarrow res \mbox{ (mod }p\mbox{)}$ \\
-\hspace{6mm}13.1.3  $bitbuf \leftarrow bitbuf << 1$ \\
-\hspace{6mm}13.1.4  If $bitbuf$ AND $2^{winsize} \ne 0$ then do \\
-\hspace{9mm}13.1.4.1  $res \leftarrow res \cdot M_{1}$ \\
-\hspace{9mm}13.1.4.2  $res \leftarrow res \mbox{ (mod }p\mbox{)}$ \\
-14.  $y \leftarrow res$ \\
-15.  Clear $res$, $mu$ and the $M$ array. \\
-16.  Return(\textit{MP\_OKAY}). \\
-\hline
-\end{tabular}
-\end{center}
-\end{small}
-\caption{Algorithm s\_mp\_exptmod (continued)}
-\end{figure}
-
-\textbf{Algorithm s\_mp\_exptmod.}
-This algorithm computes the $x$'th power of $g$ modulo $p$ and stores the result in $y$.  It takes advantage of the Barrett reduction
-algorithm to keep the product small throughout the algorithm.
-
-The first two steps determine the optimal window size based on the number of bits in the exponent.  The larger the exponent the 
-larger the window size becomes.  After a window size $winsize$ has been chosen an array of $2^{winsize}$ mp\_int variables is allocated.  This
-table will hold the values of $g^x \mbox{ (mod }p\mbox{)}$ for $2^{winsize - 1} \le x < 2^{winsize}$.  
-
-After the table is allocated the first power of $g$ is found.  Since $g \ge p$ is allowed it must be first reduced modulo $p$ to make
-the rest of the algorithm more efficient.  The first element of the table at $2^{winsize - 1}$ is found by squaring $M_1$ successively $winsize - 2$
-times.  The rest of the table elements are found by multiplying the previous element by $M_1$ modulo $p$.
-
-Now that the table is available the sliding window may begin.  The following list describes the functions of all the variables in the window.
-\begin{enumerate}
-\item The variable $mode$ dictates how the bits of the exponent are interpreted.  
-\begin{enumerate}
-   \item When $mode = 0$ the bits are ignored since no non-zero bit of the exponent has been seen yet.  For example, if the exponent were simply 
-         $1$ then there would be $lg(\beta) - 1$ zero bits before the first non-zero bit.  In this case bits are ignored until a non-zero bit is found.  
-   \item When $mode = 1$ a non-zero bit has been seen before and a new $winsize$-bit window has not been formed yet.  In this mode leading $0$ bits 
-         are read and a single squaring is performed.  If a non-zero bit is read a new window is created.  
-   \item When $mode = 2$ the algorithm is in the middle of forming a window and new bits are appended to the window from the most significant bit
-         downwards.
-\end{enumerate}
-\item The variable $bitcnt$ indicates how many bits are left in the current digit of the exponent left to be read.  When it reaches zero a new digit
-      is fetched from the exponent.
-\item The variable $buf$ holds the currently read digit of the exponent. 
-\item The variable $digidx$ is an index into the exponents digits.  It starts at the leading digit $x.used - 1$ and moves towards the trailing digit.
-\item The variable $bitcpy$ indicates how many bits are in the currently formed window.  When it reaches $winsize$ the window is flushed and
-      the appropriate operations performed.
-\item The variable $bitbuf$ holds the current bits of the window being formed.  
-\end{enumerate}
-
-All of step 12 is the window processing loop.  It will iterate while there are digits available form the exponent to read.  The first step
-inside this loop is to extract a new digit if no more bits are available in the current digit.  If there are no bits left a new digit is
-read and if there are no digits left than the loop terminates.  
-
-After a digit is made available step 12.3 will extract the most significant bit of the current digit and move all other bits in the digit
-upwards.  In effect the digit is read from most significant bit to least significant bit and since the digits are read from leading to 
-trailing edges the entire exponent is read from most significant bit to least significant bit.
-
-At step 12.5 if the $mode$ and currently extracted bit $y$ are both zero the bit is ignored and the next bit is read.  This prevents the 
-algorithm from having to perform trivial squaring and reduction operations before the first non-zero bit is read.  Step 12.6 and 12.7-10 handle
-the two cases of $mode = 1$ and $mode = 2$ respectively.  
-
-\begin{center}
-\begin{figure}[here]
-\includegraphics{pics/expt_state.ps}
-\caption{Sliding Window State Diagram}
-\label{pic:expt_state}
-\end{figure}
-\end{center}
-
-By step 13 there are no more digits left in the exponent.  However, there may be partial bits in the window left.  If $mode = 2$ then 
-a Left-to-Right algorithm is used to process the remaining few bits.  
-
-\vspace{+3mm}\begin{small}
-\hspace{-5.1mm}{\bf File}: bn\_s\_mp\_exptmod.c
-\vspace{-3mm}
-\begin{alltt}
-016   
-017   #ifdef MP_LOW_MEM
-018      #define TAB_SIZE 32
-019   #else
-020      #define TAB_SIZE 256
-021   #endif
-022   
-023   int s_mp_exptmod (mp_int * G, mp_int * X, mp_int * P, mp_int * Y, int redmod
-      e)
-024   \{
-025     mp_int  M[TAB_SIZE], res, mu;
-026     mp_digit buf;
-027     int     err, bitbuf, bitcpy, bitcnt, mode, digidx, x, y, winsize;
-028     int (*redux)(mp_int*,mp_int*,mp_int*);
-029   
-030     /* find window size */
-031     x = mp_count_bits (X);
-032     if (x <= 7) \{
-033       winsize = 2;
-034     \} else if (x <= 36) \{
-035       winsize = 3;
-036     \} else if (x <= 140) \{
-037       winsize = 4;
-038     \} else if (x <= 450) \{
-039       winsize = 5;
-040     \} else if (x <= 1303) \{
-041       winsize = 6;
-042     \} else if (x <= 3529) \{
-043       winsize = 7;
-044     \} else \{
-045       winsize = 8;
-046     \}
-047   
-048   #ifdef MP_LOW_MEM
-049       if (winsize > 5) \{
-050          winsize = 5;
-051       \}
-052   #endif
-053   
-054     /* init M array */
-055     /* init first cell */
-056     if ((err = mp_init(&M[1])) != MP_OKAY) \{
-057        return err; 
-058     \}
-059   
-060     /* now init the second half of the array */
-061     for (x = 1<<(winsize-1); x < (1 << winsize); x++) \{
-062       if ((err = mp_init(&M[x])) != MP_OKAY) \{
-063         for (y = 1<<(winsize-1); y < x; y++) \{
-064           mp_clear (&M[y]);
-065         \}
-066         mp_clear(&M[1]);
-067         return err;
-068       \}
-069     \}
-070   
-071     /* create mu, used for Barrett reduction */
-072     if ((err = mp_init (&mu)) != MP_OKAY) \{
-073       goto LBL_M;
-074     \}
-075     
-076     if (redmode == 0) \{
-077        if ((err = mp_reduce_setup (&mu, P)) != MP_OKAY) \{
-078           goto LBL_MU;
-079        \}
-080        redux = mp_reduce;
-081     \} else \{
-082        if ((err = mp_reduce_2k_setup_l (P, &mu)) != MP_OKAY) \{
-083           goto LBL_MU;
-084        \}
-085        redux = mp_reduce_2k_l;
-086     \}    
-087   
-088     /* create M table
-089      *
-090      * The M table contains powers of the base, 
-091      * e.g. M[x] = G**x mod P
-092      *
-093      * The first half of the table is not 
-094      * computed though accept for M[0] and M[1]
-095      */
-096     if ((err = mp_mod (G, P, &M[1])) != MP_OKAY) \{
-097       goto LBL_MU;
-098     \}
-099   
-100     /* compute the value at M[1<<(winsize-1)] by squaring 
-101      * M[1] (winsize-1) times 
-102      */
-103     if ((err = mp_copy (&M[1], &M[1 << (winsize - 1)])) != MP_OKAY) \{
-104       goto LBL_MU;
-105     \}
-106   
-107     for (x = 0; x < (winsize - 1); x++) \{
-108       /* square it */
-109       if ((err = mp_sqr (&M[1 << (winsize - 1)], 
-110                          &M[1 << (winsize - 1)])) != MP_OKAY) \{
-111         goto LBL_MU;
-112       \}
-113   
-114       /* reduce modulo P */
-115       if ((err = redux (&M[1 << (winsize - 1)], P, &mu)) != MP_OKAY) \{
-116         goto LBL_MU;
-117       \}
-118     \}
-119   
-120     /* create upper table, that is M[x] = M[x-1] * M[1] (mod P)
-121      * for x = (2**(winsize - 1) + 1) to (2**winsize - 1)
-122      */
-123     for (x = (1 << (winsize - 1)) + 1; x < (1 << winsize); x++) \{
-124       if ((err = mp_mul (&M[x - 1], &M[1], &M[x])) != MP_OKAY) \{
-125         goto LBL_MU;
-126       \}
-127       if ((err = redux (&M[x], P, &mu)) != MP_OKAY) \{
-128         goto LBL_MU;
-129       \}
-130     \}
-131   
-132     /* setup result */
-133     if ((err = mp_init (&res)) != MP_OKAY) \{
-134       goto LBL_MU;
-135     \}
-136     mp_set (&res, 1);
-137   
-138     /* set initial mode and bit cnt */
-139     mode   = 0;
-140     bitcnt = 1;
-141     buf    = 0;
-142     digidx = X->used - 1;
-143     bitcpy = 0;
-144     bitbuf = 0;
-145   
-146     for (;;) \{
-147       /* grab next digit as required */
-148       if (--bitcnt == 0) \{
-149         /* if digidx == -1 we are out of digits */
-150         if (digidx == -1) \{
-151           break;
-152         \}
-153         /* read next digit and reset the bitcnt */
-154         buf    = X->dp[digidx--];
-155         bitcnt = (int) DIGIT_BIT;
-156       \}
-157   
-158       /* grab the next msb from the exponent */
-159       y     = (buf >> (mp_digit)(DIGIT_BIT - 1)) & 1;
-160       buf <<= (mp_digit)1;
-161   
-162       /* if the bit is zero and mode == 0 then we ignore it
-163        * These represent the leading zero bits before the first 1 bit
-164        * in the exponent.  Technically this opt is not required but it
-165        * does lower the # of trivial squaring/reductions used
-166        */
-167       if (mode == 0 && y == 0) \{
-168         continue;
-169       \}
-170   
-171       /* if the bit is zero and mode == 1 then we square */
-172       if (mode == 1 && y == 0) \{
-173         if ((err = mp_sqr (&res, &res)) != MP_OKAY) \{
-174           goto LBL_RES;
-175         \}
-176         if ((err = redux (&res, P, &mu)) != MP_OKAY) \{
-177           goto LBL_RES;
-178         \}
-179         continue;
-180       \}
-181   
-182       /* else we add it to the window */
-183       bitbuf |= (y << (winsize - ++bitcpy));
-184       mode    = 2;
-185   
-186       if (bitcpy == winsize) \{
-187         /* ok window is filled so square as required and multiply  */
-188         /* square first */
-189         for (x = 0; x < winsize; x++) \{
-190           if ((err = mp_sqr (&res, &res)) != MP_OKAY) \{
-191             goto LBL_RES;
-192           \}
-193           if ((err = redux (&res, P, &mu)) != MP_OKAY) \{
-194             goto LBL_RES;
-195           \}
-196         \}
-197   
-198         /* then multiply */
-199         if ((err = mp_mul (&res, &M[bitbuf], &res)) != MP_OKAY) \{
-200           goto LBL_RES;
-201         \}
-202         if ((err = redux (&res, P, &mu)) != MP_OKAY) \{
-203           goto LBL_RES;
-204         \}
-205   
-206         /* empty window and reset */
-207         bitcpy = 0;
-208         bitbuf = 0;
-209         mode   = 1;
-210       \}
-211     \}
-212   
-213     /* if bits remain then square/multiply */
-214     if (mode == 2 && bitcpy > 0) \{
-215       /* square then multiply if the bit is set */
-216       for (x = 0; x < bitcpy; x++) \{
-217         if ((err = mp_sqr (&res, &res)) != MP_OKAY) \{
-218           goto LBL_RES;
-219         \}
-220         if ((err = redux (&res, P, &mu)) != MP_OKAY) \{
-221           goto LBL_RES;
-222         \}
-223   
-224         bitbuf <<= 1;
-225         if ((bitbuf & (1 << winsize)) != 0) \{
-226           /* then multiply */
-227           if ((err = mp_mul (&res, &M[1], &res)) != MP_OKAY) \{
-228             goto LBL_RES;
-229           \}
-230           if ((err = redux (&res, P, &mu)) != MP_OKAY) \{
-231             goto LBL_RES;
-232           \}
-233         \}
-234       \}
-235     \}
-236   
-237     mp_exch (&res, Y);
-238     err = MP_OKAY;
-239   LBL_RES:mp_clear (&res);
-240   LBL_MU:mp_clear (&mu);
-241   LBL_M:
-242     mp_clear(&M[1]);
-243     for (x = 1<<(winsize-1); x < (1 << winsize); x++) \{
-244       mp_clear (&M[x]);
-245     \}
-246     return err;
-247   \}
-248   #endif
-\end{alltt}
-\end{small}
-
-Lines 21 through 40 determine the optimal window size based on the length of the exponent in bits.  The window divisions are sorted
-from smallest to greatest so that in each \textbf{if} statement only one condition must be tested.  For example, by the \textbf{if} statement 
-on line 32 the value of $x$ is already known to be greater than $140$.  
-
-The conditional piece of code beginning on line 48 allows the window size to be restricted to five bits.  This logic is used to ensure
-the table of precomputed powers of $G$ remains relatively small.  
-
-The for loop on line 61 initializes the $M$ array while lines 62 and 77 compute the value of $\mu$ required for
-Barrett reduction.  
-
--- More later.
-
-\section{Quick Power of Two}
-Calculating $b = 2^a$ can be performed much quicker than with any of the previous algorithms.  Recall that a logical shift left $m << k$ is
-equivalent to $m \cdot 2^k$.  By this logic when $m = 1$ a quick power of two can be achieved.
-
-\begin{figure}[!here]
-\begin{small}
-\begin{center}
-\begin{tabular}{l}
-\hline Algorithm \textbf{mp\_2expt}. \\
-\textbf{Input}.   integer $b$ \\
-\textbf{Output}.  $a \leftarrow 2^b$ \\
-\hline \\
-1.  $a \leftarrow 0$ \\
-2.  If $a.alloc < \lfloor b / lg(\beta) \rfloor + 1$ then grow $a$ appropriately. \\
-3.  $a.used \leftarrow \lfloor b / lg(\beta) \rfloor + 1$ \\
-4.  $a_{\lfloor b / lg(\beta) \rfloor} \leftarrow 1 << (b \mbox{ mod } lg(\beta))$ \\
-5.  Return(\textit{MP\_OKAY}). \\
-\hline
-\end{tabular}
-\end{center}
-\end{small}
-\caption{Algorithm mp\_2expt}
-\end{figure}
-
-\textbf{Algorithm mp\_2expt.}
-
-\vspace{+3mm}\begin{small}
-\hspace{-5.1mm}{\bf File}: bn\_mp\_2expt.c
-\vspace{-3mm}
-\begin{alltt}
-016   
-017   /* computes a = 2**b 
-018    *
-019    * Simple algorithm which zeroes the int, grows it then just sets one bit
-020    * as required.
-021    */
-022   int
-023   mp_2expt (mp_int * a, int b)
-024   \{
-025     int     res;
-026   
-027     /* zero a as per default */
-028     mp_zero (a);
-029   
-030     /* grow a to accomodate the single bit */
-031     if ((res = mp_grow (a, b / DIGIT_BIT + 1)) != MP_OKAY) \{
-032       return res;
-033     \}
-034   
-035     /* set the used count of where the bit will go */
-036     a->used = b / DIGIT_BIT + 1;
-037   
-038     /* put the single bit in its place */
-039     a->dp[b / DIGIT_BIT] = ((mp_digit)1) << (b % DIGIT_BIT);
-040   
-041     return MP_OKAY;
-042   \}
-043   #endif
-\end{alltt}
-\end{small}
-
-\chapter{Higher Level Algorithms}
-
-This chapter discusses the various higher level algorithms that are required to complete a well rounded multiple precision integer package.  These
-routines are less performance oriented than the algorithms of chapters five, six and seven but are no less important.  
-
-The first section describes a method of integer division with remainder that is universally well known.  It provides the signed division logic
-for the package.  The subsequent section discusses a set of algorithms which allow a single digit to be the 2nd operand for a variety of operations.  
-These algorithms serve mostly to simplify other algorithms where small constants are required.  The last two sections discuss how to manipulate 
-various representations of integers.  For example, converting from an mp\_int to a string of character.
-
-\section{Integer Division with Remainder}
-\label{sec:division}
-
-Integer division aside from modular exponentiation is the most intensive algorithm to compute.  Like addition, subtraction and multiplication
-the basis of this algorithm is the long-hand division algorithm taught to school children.  Throughout this discussion several common variables
-will be used.  Let $x$ represent the divisor and $y$ represent the dividend.  Let $q$ represent the integer quotient $\lfloor y / x \rfloor$ and 
-let $r$ represent the remainder $r = y - x \lfloor y / x \rfloor$.  The following simple algorithm will be used to start the discussion.
-
-\newpage\begin{figure}[!here]
-\begin{small}
-\begin{center}
-\begin{tabular}{l}
-\hline Algorithm \textbf{Radix-$\beta$ Integer Division}. \\
-\textbf{Input}.   integer $x$ and $y$ \\
-\textbf{Output}.  $q = \lfloor y/x\rfloor, r = y - xq$ \\
-\hline \\
-1.  $q \leftarrow 0$ \\
-2.  $n \leftarrow \vert \vert y \vert \vert - \vert \vert x \vert \vert$ \\
-3.  for $t$ from $n$ down to $0$ do \\
-\hspace{3mm}3.1  Maximize $k$ such that $kx\beta^t$ is less than or equal to $y$ and $(k + 1)x\beta^t$ is greater. \\
-\hspace{3mm}3.2  $q \leftarrow q + k\beta^t$ \\
-\hspace{3mm}3.3  $y \leftarrow y - kx\beta^t$ \\
-4.  $r \leftarrow y$ \\
-5.  Return($q, r$) \\
-\hline
-\end{tabular}
-\end{center}
-\end{small}
-\caption{Algorithm Radix-$\beta$ Integer Division}
-\label{fig:raddiv}
-\end{figure}
-
-As children we are taught this very simple algorithm for the case of $\beta = 10$.  Almost instinctively several optimizations are taught for which
-their reason of existing are never explained.  For this example let $y = 5471$ represent the dividend and $x = 23$ represent the divisor.
-
-To find the first digit of the quotient the value of $k$ must be maximized such that $kx\beta^t$ is less than or equal to $y$ and 
-simultaneously $(k + 1)x\beta^t$ is greater than $y$.  Implicitly $k$ is the maximum value the $t$'th digit of the quotient may have.  The habitual method
-used to find the maximum is to ``eyeball'' the two numbers, typically only the leading digits and quickly estimate a quotient.  By only using leading
-digits a much simpler division may be used to form an educated guess at what the value must be.  In this case $k = \lfloor 54/23\rfloor = 2$ quickly 
-arises as a possible  solution.  Indeed $2x\beta^2 = 4600$ is less than $y = 5471$ and simultaneously $(k + 1)x\beta^2 = 6900$ is larger than $y$.  
-As a  result $k\beta^2$ is added to the quotient which now equals $q = 200$ and $4600$ is subtracted from $y$ to give a remainder of $y = 841$.
-
-Again this process is repeated to produce the quotient digit $k = 3$ which makes the quotient $q = 200 + 3\beta = 230$ and the remainder 
-$y = 841 - 3x\beta = 181$.  Finally the last iteration of the loop produces $k = 7$ which leads to the quotient $q = 230 + 7 = 237$ and the
-remainder $y = 181 - 7x = 20$.  The final quotient and remainder found are $q = 237$ and $r = y = 20$ which are indeed correct since 
-$237 \cdot 23 + 20 = 5471$ is true.  
-
-\subsection{Quotient Estimation}
-\label{sec:divest}
-As alluded to earlier the quotient digit $k$ can be estimated from only the leading digits of both the divisor and dividend.  When $p$ leading
-digits are used from both the divisor and dividend to form an estimation the accuracy of the estimation rises as $p$ grows.  Technically
-speaking the estimation is based on assuming the lower $\vert \vert y \vert \vert - p$ and $\vert \vert x \vert \vert - p$ lower digits of the
-dividend and divisor are zero.  
-
-The value of the estimation may off by a few values in either direction and in general is fairly correct.  A simplification \cite[pp. 271]{TAOCPV2}
-of the estimation technique is to use $t + 1$ digits of the dividend and $t$ digits of the divisor, in particularly when $t = 1$.  The estimate 
-using this technique is never too small.  For the following proof let $t = \vert \vert y \vert \vert - 1$ and $s = \vert \vert x \vert \vert - 1$ 
-represent the most significant digits of the dividend and divisor respectively.
-
-\textbf{Proof.}\textit{  The quotient $\hat k = \lfloor (y_t\beta + y_{t-1}) / x_s \rfloor$ is greater than or equal to 
-$k = \lfloor y / (x \cdot \beta^{\vert \vert y \vert \vert - \vert \vert x \vert \vert - 1}) \rfloor$. }
-The first obvious case is when $\hat k = \beta - 1$ in which case the proof is concluded since the real quotient cannot be larger.  For all other 
-cases $\hat k = \lfloor (y_t\beta + y_{t-1}) / x_s \rfloor$ and $\hat k x_s \ge y_t\beta + y_{t-1} - x_s + 1$.  The latter portion of the inequalility
-$-x_s + 1$ arises from the fact that a truncated integer division will give the same quotient for at most $x_s - 1$ values.  Next a series of 
-inequalities will prove the hypothesis.
-
-\begin{equation}
-y - \hat k x \le y - \hat k x_s\beta^s
-\end{equation}
-
-This is trivially true since $x \ge x_s\beta^s$.  Next we replace $\hat kx_s\beta^s$ by the previous inequality for $\hat kx_s$.  
-
-\begin{equation}
-y - \hat k x \le y_t\beta^t + \ldots + y_0 - (y_t\beta^t + y_{t-1}\beta^{t-1} - x_s\beta^t + \beta^s)
-\end{equation}
-
-By simplifying the previous inequality the following inequality is formed.
-
-\begin{equation}
-y - \hat k x \le y_{t-2}\beta^{t-2} + \ldots + y_0 + x_s\beta^s - \beta^s
-\end{equation}
-
-Subsequently,
-
-\begin{equation}
-y_{t-2}\beta^{t-2} + \ldots +  y_0  + x_s\beta^s - \beta^s < x_s\beta^s \le x
-\end{equation}
-
-Which proves that $y - \hat kx \le x$ and by consequence $\hat k \ge k$ which concludes the proof.  \textbf{QED}
-
-
-\subsection{Normalized Integers}
-For the purposes of division a normalized input is when the divisors leading digit $x_n$ is greater than or equal to $\beta / 2$.  By multiplying both
-$x$ and $y$ by $j = \lfloor (\beta / 2) / x_n \rfloor$ the quotient remains unchanged and the remainder is simply $j$ times the original
-remainder.  The purpose of normalization is to ensure the leading digit of the divisor is sufficiently large such that the estimated quotient will
-lie in the domain of a single digit.  Consider the maximum dividend $(\beta - 1) \cdot \beta + (\beta - 1)$ and the minimum divisor $\beta / 2$.  
-
-\begin{equation} 
-{{\beta^2 - 1} \over { \beta / 2}} \le 2\beta - {2 \over \beta} 
-\end{equation}
-
-At most the quotient approaches $2\beta$, however, in practice this will not occur since that would imply the previous quotient digit was too small.  
-
-\subsection{Radix-$\beta$ Division with Remainder}
-\newpage\begin{figure}[!here]
-\begin{small}
-\begin{center}
-\begin{tabular}{l}
-\hline Algorithm \textbf{mp\_div}. \\
-\textbf{Input}.   mp\_int $a, b$ \\
-\textbf{Output}.  $c = \lfloor a/b \rfloor$, $d = a - bc$ \\
-\hline \\
-1.  If $b = 0$ return(\textit{MP\_VAL}). \\
-2.  If $\vert a \vert < \vert b \vert$ then do \\
-\hspace{3mm}2.1  $d \leftarrow a$ \\
-\hspace{3mm}2.2  $c \leftarrow 0$ \\
-\hspace{3mm}2.3  Return(\textit{MP\_OKAY}). \\
-\\
-Setup the quotient to receive the digits. \\
-3.  Grow $q$ to $a.used + 2$ digits. \\
-4.  $q \leftarrow 0$ \\
-5.  $x \leftarrow \vert a \vert , y \leftarrow \vert b \vert$ \\
-6.  $sign \leftarrow  \left \lbrace \begin{array}{ll}
-                              MP\_ZPOS &  \mbox{if }a.sign = b.sign \\
-                              MP\_NEG  &  \mbox{otherwise} \\
-                              \end{array} \right .$ \\
-\\
-Normalize the inputs such that the leading digit of $y$ is greater than or equal to $\beta / 2$. \\
-7.  $norm \leftarrow (lg(\beta) - 1) - (\lceil lg(y) \rceil \mbox{ (mod }lg(\beta)\mbox{)})$ \\
-8.  $x \leftarrow x \cdot 2^{norm}, y \leftarrow y \cdot 2^{norm}$ \\
-\\
-Find the leading digit of the quotient. \\
-9.  $n \leftarrow x.used - 1, t \leftarrow y.used - 1$ \\
-10.  $y \leftarrow y \cdot \beta^{n - t}$ \\
-11.  While ($x \ge y$) do \\
-\hspace{3mm}11.1  $q_{n - t} \leftarrow q_{n - t} + 1$ \\
-\hspace{3mm}11.2  $x \leftarrow x - y$ \\
-12.  $y \leftarrow \lfloor y / \beta^{n-t} \rfloor$ \\
-\\
-Continued on the next page. \\
-\hline
-\end{tabular}
-\end{center}
-\end{small}
-\caption{Algorithm mp\_div}
-\end{figure}
-
-\newpage\begin{figure}[!here]
-\begin{small}
-\begin{center}
-\begin{tabular}{l}
-\hline Algorithm \textbf{mp\_div} (continued). \\
-\textbf{Input}.   mp\_int $a, b$ \\
-\textbf{Output}.  $c = \lfloor a/b \rfloor$, $d = a - bc$ \\
-\hline \\
-Now find the remainder fo the digits. \\
-13.  for $i$ from $n$ down to $(t + 1)$ do \\
-\hspace{3mm}13.1  If $i > x.used$ then jump to the next iteration of this loop. \\
-\hspace{3mm}13.2  If $x_{i} = y_{t}$ then \\
-\hspace{6mm}13.2.1  $q_{i - t - 1} \leftarrow \beta - 1$ \\
-\hspace{3mm}13.3  else \\
-\hspace{6mm}13.3.1  $\hat r \leftarrow x_{i} \cdot \beta + x_{i - 1}$ \\
-\hspace{6mm}13.3.2  $\hat r \leftarrow \lfloor \hat r / y_{t} \rfloor$ \\
-\hspace{6mm}13.3.3  $q_{i - t - 1} \leftarrow \hat r$ \\
-\hspace{3mm}13.4  $q_{i - t - 1} \leftarrow q_{i - t - 1} + 1$ \\
-\\
-Fixup quotient estimation. \\
-\hspace{3mm}13.5  Loop \\
-\hspace{6mm}13.5.1  $q_{i - t - 1} \leftarrow q_{i - t - 1} - 1$ \\
-\hspace{6mm}13.5.2  t$1 \leftarrow 0$ \\
-\hspace{6mm}13.5.3  t$1_0 \leftarrow y_{t - 1}, $ t$1_1 \leftarrow y_t,$ t$1.used \leftarrow 2$ \\
-\hspace{6mm}13.5.4  $t1 \leftarrow t1 \cdot q_{i - t - 1}$ \\
-\hspace{6mm}13.5.5  t$2_0 \leftarrow x_{i - 2}, $ t$2_1 \leftarrow x_{i - 1}, $ t$2_2 \leftarrow x_i, $ t$2.used \leftarrow 3$ \\
-\hspace{6mm}13.5.6  If $\vert t1 \vert > \vert t2 \vert$ then goto step 13.5. \\
-\hspace{3mm}13.6  t$1 \leftarrow y \cdot q_{i - t - 1}$ \\
-\hspace{3mm}13.7  t$1 \leftarrow $ t$1 \cdot \beta^{i - t - 1}$ \\
-\hspace{3mm}13.8  $x \leftarrow x - $ t$1$ \\
-\hspace{3mm}13.9  If $x.sign = MP\_NEG$ then \\
-\hspace{6mm}13.10  t$1 \leftarrow y$ \\
-\hspace{6mm}13.11  t$1 \leftarrow $ t$1 \cdot \beta^{i - t - 1}$ \\
-\hspace{6mm}13.12  $x \leftarrow x + $ t$1$ \\
-\hspace{6mm}13.13  $q_{i - t - 1} \leftarrow q_{i - t - 1} - 1$ \\
-\\
-Finalize the result. \\
-14.  Clamp excess digits of $q$ \\
-15.  $c \leftarrow q, c.sign \leftarrow sign$ \\
-16.  $x.sign \leftarrow a.sign$ \\
-17.  $d \leftarrow \lfloor x / 2^{norm} \rfloor$ \\
-18.  Return(\textit{MP\_OKAY}). \\
-\hline
-\end{tabular}
-\end{center}
-\end{small}
-\caption{Algorithm mp\_div (continued)}
-\end{figure}
-\textbf{Algorithm mp\_div.}
-This algorithm will calculate quotient and remainder from an integer division given a dividend and divisor.  The algorithm is a signed
-division and will produce a fully qualified quotient and remainder.
-
-First the divisor $b$ must be non-zero which is enforced in step one.  If the divisor is larger than the dividend than the quotient is implicitly 
-zero and the remainder is the dividend.  
-
-After the first two trivial cases of inputs are handled the variable $q$ is setup to receive the digits of the quotient.  Two unsigned copies of the
-divisor $y$ and dividend $x$ are made as well.  The core of the division algorithm is an unsigned division and will only work if the values are
-positive.  Now the two values $x$ and $y$ must be normalized such that the leading digit of $y$ is greater than or equal to $\beta / 2$.  
-This is performed by shifting both to the left by enough bits to get the desired normalization.  
-
-At this point the division algorithm can begin producing digits of the quotient.  Recall that maximum value of the estimation used is 
-$2\beta - {2 \over \beta}$ which means that a digit of the quotient must be first produced by another means.  In this case $y$ is shifted
-to the left (\textit{step ten}) so that it has the same number of digits as $x$.  The loop on step eleven will subtract multiples of the 
-shifted copy of $y$ until $x$ is smaller.  Since the leading digit of $y$ is greater than or equal to $\beta/2$ this loop will iterate at most two
-times to produce the desired leading digit of the quotient.  
-
-Now the remainder of the digits can be produced.  The equation $\hat q = \lfloor {{x_i \beta + x_{i-1}}\over y_t} \rfloor$ is used to fairly
-accurately approximate the true quotient digit.  The estimation can in theory produce an estimation as high as $2\beta - {2 \over \beta}$ but by
-induction the upper quotient digit is correct (\textit{as established on step eleven}) and the estimate must be less than $\beta$.  
-
-Recall from section~\ref{sec:divest} that the estimation is never too low but may be too high.  The next step of the estimation process is
-to refine the estimation.  The loop on step 13.5 uses $x_i\beta^2 + x_{i-1}\beta + x_{i-2}$ and $q_{i - t - 1}(y_t\beta + y_{t-1})$ as a higher
-order approximation to adjust the quotient digit.
-
-After both phases of estimation the quotient digit may still be off by a value of one\footnote{This is similar to the error introduced
-by optimizing Barrett reduction.}.  Steps 13.6 and 13.7 subtract the multiple of the divisor from the dividend (\textit{Similar to step 3.3 of
-algorithm~\ref{fig:raddiv}} and then subsequently add a multiple of the divisor if the quotient was too large.  
-
-Now that the quotient has been determine finializing the result is a matter of clamping the quotient, fixing the sizes and de-normalizing the 
-remainder.  An important aspect of this algorithm seemingly overlooked in other descriptions such as that of Algorithm 14.20 HAC \cite[pp. 598]{HAC}
-is that when the estimations are being made (\textit{inside the loop on step 13.5}) that the digits $y_{t-1}$, $x_{i-2}$ and $x_{i-1}$ may lie 
-outside their respective boundaries.  For example, if $t = 0$ or $i \le 1$ then the digits would be undefined.  In those cases the digits should
-respectively be replaced with a zero.  
-
-\vspace{+3mm}\begin{small}
-\hspace{-5.1mm}{\bf File}: bn\_mp\_div.c
-\vspace{-3mm}
-\begin{alltt}
-016   
-017   #ifdef BN_MP_DIV_SMALL
-018   
-019   /* slower bit-bang division... also smaller */
-020   int mp_div(mp_int * a, mp_int * b, mp_int * c, mp_int * d)
-021   \{
-022      mp_int ta, tb, tq, q;
-023      int    res, n, n2;
-024   
-025     /* is divisor zero ? */
-026     if (mp_iszero (b) == 1) \{
-027       return MP_VAL;
-028     \}
-029   
-030     /* if a < b then q=0, r = a */
-031     if (mp_cmp_mag (a, b) == MP_LT) \{
-032       if (d != NULL) \{
-033         res = mp_copy (a, d);
-034       \} else \{
-035         res = MP_OKAY;
-036       \}
-037       if (c != NULL) \{
-038         mp_zero (c);
-039       \}
-040       return res;
-041     \}
-042       
-043     /* init our temps */
-044     if ((res = mp_init_multi(&ta, &tb, &tq, &q, NULL) != MP_OKAY)) \{
-045        return res;
-046     \}
-047   
-048   
-049     mp_set(&tq, 1);
-050     n = mp_count_bits(a) - mp_count_bits(b);
-051     if (((res = mp_abs(a, &ta)) != MP_OKAY) ||
-052         ((res = mp_abs(b, &tb)) != MP_OKAY) || 
-053         ((res = mp_mul_2d(&tb, n, &tb)) != MP_OKAY) ||
-054         ((res = mp_mul_2d(&tq, n, &tq)) != MP_OKAY)) \{
-055         goto LBL_ERR;
-056     \}
-057   
-058     while (n-- >= 0) \{
-059        if (mp_cmp(&tb, &ta) != MP_GT) \{
-060           if (((res = mp_sub(&ta, &tb, &ta)) != MP_OKAY) ||
-061               ((res = mp_add(&q, &tq, &q)) != MP_OKAY)) \{
-062              goto LBL_ERR;
-063           \}
-064        \}
-065        if (((res = mp_div_2d(&tb, 1, &tb, NULL)) != MP_OKAY) ||
-066            ((res = mp_div_2d(&tq, 1, &tq, NULL)) != MP_OKAY)) \{
-067              goto LBL_ERR;
-068        \}
-069     \}
-070   
-071     /* now q == quotient and ta == remainder */
-072     n  = a->sign;
-073     n2 = (a->sign == b->sign ? MP_ZPOS : MP_NEG);
-074     if (c != NULL) \{
-075        mp_exch(c, &q);
-076        c->sign  = (mp_iszero(c) == MP_YES) ? MP_ZPOS : n2;
-077     \}
-078     if (d != NULL) \{
-079        mp_exch(d, &ta);
-080        d->sign = (mp_iszero(d) == MP_YES) ? MP_ZPOS : n;
-081     \}
-082   LBL_ERR:
-083      mp_clear_multi(&ta, &tb, &tq, &q, NULL);
-084      return res;
-085   \}
-086   
-087   #else
-088   
-089   /* integer signed division. 
-090    * c*b + d == a [e.g. a/b, c=quotient, d=remainder]
-091    * HAC pp.598 Algorithm 14.20
-092    *
-093    * Note that the description in HAC is horribly 
-094    * incomplete.  For example, it doesn't consider 
-095    * the case where digits are removed from 'x' in 
-096    * the inner loop.  It also doesn't consider the 
-097    * case that y has fewer than three digits, etc..
-098    *
-099    * The overall algorithm is as described as 
-100    * 14.20 from HAC but fixed to treat these cases.
-101   */
-102   int mp_div (mp_int * a, mp_int * b, mp_int * c, mp_int * d)
-103   \{
-104     mp_int  q, x, y, t1, t2;
-105     int     res, n, t, i, norm, neg;
-106   
-107     /* is divisor zero ? */
-108     if (mp_iszero (b) == 1) \{
-109       return MP_VAL;
-110     \}
-111   
-112     /* if a < b then q=0, r = a */
-113     if (mp_cmp_mag (a, b) == MP_LT) \{
-114       if (d != NULL) \{
-115         res = mp_copy (a, d);
-116       \} else \{
-117         res = MP_OKAY;
-118       \}
-119       if (c != NULL) \{
-120         mp_zero (c);
-121       \}
-122       return res;
-123     \}
-124   
-125     if ((res = mp_init_size (&q, a->used + 2)) != MP_OKAY) \{
-126       return res;
-127     \}
-128     q.used = a->used + 2;
-129   
-130     if ((res = mp_init (&t1)) != MP_OKAY) \{
-131       goto LBL_Q;
-132     \}
-133   
-134     if ((res = mp_init (&t2)) != MP_OKAY) \{
-135       goto LBL_T1;
-136     \}
-137   
-138     if ((res = mp_init_copy (&x, a)) != MP_OKAY) \{
-139       goto LBL_T2;
-140     \}
-141   
-142     if ((res = mp_init_copy (&y, b)) != MP_OKAY) \{
-143       goto LBL_X;
-144     \}
-145   
-146     /* fix the sign */
-147     neg = (a->sign == b->sign) ? MP_ZPOS : MP_NEG;
-148     x.sign = y.sign = MP_ZPOS;
-149   
-150     /* normalize both x and y, ensure that y >= b/2, [b == 2**DIGIT_BIT] */
-151     norm = mp_count_bits(&y) % DIGIT_BIT;
-152     if (norm < (int)(DIGIT_BIT-1)) \{
-153        norm = (DIGIT_BIT-1) - norm;
-154        if ((res = mp_mul_2d (&x, norm, &x)) != MP_OKAY) \{
-155          goto LBL_Y;
-156        \}
-157        if ((res = mp_mul_2d (&y, norm, &y)) != MP_OKAY) \{
-158          goto LBL_Y;
-159        \}
-160     \} else \{
-161        norm = 0;
-162     \}
-163   
-164     /* note hac does 0 based, so if used==5 then its 0,1,2,3,4, e.g. use 4 */
-165     n = x.used - 1;
-166     t = y.used - 1;
-167   
-168     /* while (x >= y*b**n-t) do \{ q[n-t] += 1; x -= y*b**\{n-t\} \} */
-169     if ((res = mp_lshd (&y, n - t)) != MP_OKAY) \{ /* y = y*b**\{n-t\} */
-170       goto LBL_Y;
-171     \}
-172   
-173     while (mp_cmp (&x, &y) != MP_LT) \{
-174       ++(q.dp[n - t]);
-175       if ((res = mp_sub (&x, &y, &x)) != MP_OKAY) \{
-176         goto LBL_Y;
-177       \}
-178     \}
-179   
-180     /* reset y by shifting it back down */
-181     mp_rshd (&y, n - t);
-182   
-183     /* step 3. for i from n down to (t + 1) */
-184     for (i = n; i >= (t + 1); i--) \{
-185       if (i > x.used) \{
-186         continue;
-187       \}
-188   
-189       /* step 3.1 if xi == yt then set q\{i-t-1\} to b-1, 
-190        * otherwise set q\{i-t-1\} to (xi*b + x\{i-1\})/yt */
-191       if (x.dp[i] == y.dp[t]) \{
-192         q.dp[i - t - 1] = ((((mp_digit)1) << DIGIT_BIT) - 1);
-193       \} else \{
-194         mp_word tmp;
-195         tmp = ((mp_word) x.dp[i]) << ((mp_word) DIGIT_BIT);
-196         tmp |= ((mp_word) x.dp[i - 1]);
-197         tmp /= ((mp_word) y.dp[t]);
-198         if (tmp > (mp_word) MP_MASK)
-199           tmp = MP_MASK;
-200         q.dp[i - t - 1] = (mp_digit) (tmp & (mp_word) (MP_MASK));
-201       \}
-202   
-203       /* while (q\{i-t-1\} * (yt * b + y\{t-1\})) > 
-204                xi * b**2 + xi-1 * b + xi-2 
-205        
-206          do q\{i-t-1\} -= 1; 
-207       */
-208       q.dp[i - t - 1] = (q.dp[i - t - 1] + 1) & MP_MASK;
-209       do \{
-210         q.dp[i - t - 1] = (q.dp[i - t - 1] - 1) & MP_MASK;
-211   
-212         /* find left hand */
-213         mp_zero (&t1);
-214         t1.dp[0] = (t - 1 < 0) ? 0 : y.dp[t - 1];
-215         t1.dp[1] = y.dp[t];
-216         t1.used = 2;
-217         if ((res = mp_mul_d (&t1, q.dp[i - t - 1], &t1)) != MP_OKAY) \{
-218           goto LBL_Y;
-219         \}
-220   
-221         /* find right hand */
-222         t2.dp[0] = (i - 2 < 0) ? 0 : x.dp[i - 2];
-223         t2.dp[1] = (i - 1 < 0) ? 0 : x.dp[i - 1];
-224         t2.dp[2] = x.dp[i];
-225         t2.used = 3;
-226       \} while (mp_cmp_mag(&t1, &t2) == MP_GT);
-227   
-228       /* step 3.3 x = x - q\{i-t-1\} * y * b**\{i-t-1\} */
-229       if ((res = mp_mul_d (&y, q.dp[i - t - 1], &t1)) != MP_OKAY) \{
-230         goto LBL_Y;
-231       \}
-232   
-233       if ((res = mp_lshd (&t1, i - t - 1)) != MP_OKAY) \{
-234         goto LBL_Y;
-235       \}
-236   
-237       if ((res = mp_sub (&x, &t1, &x)) != MP_OKAY) \{
-238         goto LBL_Y;
-239       \}
-240   
-241       /* if x < 0 then \{ x = x + y*b**\{i-t-1\}; q\{i-t-1\} -= 1; \} */
-242       if (x.sign == MP_NEG) \{
-243         if ((res = mp_copy (&y, &t1)) != MP_OKAY) \{
-244           goto LBL_Y;
-245         \}
-246         if ((res = mp_lshd (&t1, i - t - 1)) != MP_OKAY) \{
-247           goto LBL_Y;
-248         \}
-249         if ((res = mp_add (&x, &t1, &x)) != MP_OKAY) \{
-250           goto LBL_Y;
-251         \}
-252   
-253         q.dp[i - t - 1] = (q.dp[i - t - 1] - 1UL) & MP_MASK;
-254       \}
-255     \}
-256   
-257     /* now q is the quotient and x is the remainder 
-258      * [which we have to normalize] 
-259      */
-260     
-261     /* get sign before writing to c */
-262     x.sign = x.used == 0 ? MP_ZPOS : a->sign;
-263   
-264     if (c != NULL) \{
-265       mp_clamp (&q);
-266       mp_exch (&q, c);
-267       c->sign = neg;
-268     \}
-269   
-270     if (d != NULL) \{
-271       mp_div_2d (&x, norm, &x, NULL);
-272       mp_exch (&x, d);
-273     \}
-274   
-275     res = MP_OKAY;
-276   
-277   LBL_Y:mp_clear (&y);
-278   LBL_X:mp_clear (&x);
-279   LBL_T2:mp_clear (&t2);
-280   LBL_T1:mp_clear (&t1);
-281   LBL_Q:mp_clear (&q);
-282     return res;
-283   \}
-284   
-285   #endif
-286   
-287   #endif
-\end{alltt}
-\end{small}
-
-The implementation of this algorithm differs slightly from the pseudo code presented previously.  In this algorithm either of the quotient $c$ or
-remainder $d$ may be passed as a \textbf{NULL} pointer which indicates their value is not desired.  For example, the C code to call the division
-algorithm with only the quotient is 
-
-\begin{verbatim}
-mp_div(&a, &b, &c, NULL);  /* c = [a/b] */
-\end{verbatim}
-
-Lines 37 and 44 handle the two trivial cases of inputs which are division by zero and dividend smaller than the divisor 
-respectively.  After the two trivial cases all of the temporary variables are initialized.  Line 105 determines the sign of 
-the quotient and line 76 ensures that both $x$ and $y$ are positive.  
-
-The number of bits in the leading digit is calculated on line 105.  Implictly an mp\_int with $r$ digits will require $lg(\beta)(r-1) + k$ bits
-of precision which when reduced modulo $lg(\beta)$ produces the value of $k$.  In this case $k$ is the number of bits in the leading digit which is
-exactly what is required.  For the algorithm to operate $k$ must equal $lg(\beta) - 1$ and when it does not the inputs must be normalized by shifting
-them to the left by $lg(\beta) - 1 - k$ bits.
-
-Throughout the variables $n$ and $t$ will represent the highest digit of $x$ and $y$ respectively.  These are first used to produce the 
-leading digit of the quotient.  The loop beginning on line 183 will produce the remainder of the quotient digits.
-
-The conditional ``continue'' on line 114 is used to prevent the algorithm from reading past the leading edge of $x$ which can occur when the
-algorithm eliminates multiple non-zero digits in a single iteration.  This ensures that $x_i$ is always non-zero since by definition the digits
-above the $i$'th position $x$ must be zero in order for the quotient to be precise\footnote{Precise as far as integer division is concerned.}.  
-
-Lines 130, 130 and 134 through 134 manually construct the high accuracy estimations by setting the digits of the two mp\_int 
-variables directly.  
-
-\section{Single Digit Helpers}
-
-This section briefly describes a series of single digit helper algorithms which come in handy when working with small constants.  All of 
-the helper functions assume the single digit input is positive and will treat them as such.
-
-\subsection{Single Digit Addition and Subtraction}
-
-Both addition and subtraction are performed by ``cheating'' and using mp\_set followed by the higher level addition or subtraction 
-algorithms.   As a result these algorithms are subtantially simpler with a slight cost in performance.
-
-\newpage\begin{figure}[!here]
-\begin{small}
-\begin{center}
-\begin{tabular}{l}
-\hline Algorithm \textbf{mp\_add\_d}. \\
-\textbf{Input}.   mp\_int $a$ and a mp\_digit $b$ \\
-\textbf{Output}.  $c = a + b$ \\
-\hline \\
-1.  $t \leftarrow b$ (\textit{mp\_set}) \\
-2.  $c \leftarrow a + t$ \\
-3.  Return(\textit{MP\_OKAY}) \\
-\hline
-\end{tabular}
-\end{center}
-\end{small}
-\caption{Algorithm mp\_add\_d}
-\end{figure}
-
-\textbf{Algorithm mp\_add\_d.}
-This algorithm initiates a temporary mp\_int with the value of the single digit and uses algorithm mp\_add to add the two values together.
-
-\vspace{+3mm}\begin{small}
-\hspace{-5.1mm}{\bf File}: bn\_mp\_add\_d.c
-\vspace{-3mm}
-\begin{alltt}
-016   
-017   /* single digit addition */
-018   int
-019   mp_add_d (mp_int * a, mp_digit b, mp_int * c)
-020   \{
-021     int     res, ix, oldused;
-022     mp_digit *tmpa, *tmpc, mu;
-023   
-024     /* grow c as required */
-025     if (c->alloc < a->used + 1) \{
-026        if ((res = mp_grow(c, a->used + 1)) != MP_OKAY) \{
-027           return res;
-028        \}
-029     \}
-030   
-031     /* if a is negative and |a| >= b, call c = |a| - b */
-032     if (a->sign == MP_NEG && (a->used > 1 || a->dp[0] >= b)) \{
-033        /* temporarily fix sign of a */
-034        a->sign = MP_ZPOS;
-035   
-036        /* c = |a| - b */
-037        res = mp_sub_d(a, b, c);
-038   
-039        /* fix sign  */
-040        a->sign = c->sign = MP_NEG;
-041   
-042        return res;
-043     \}
-044   
-045     /* old number of used digits in c */
-046     oldused = c->used;
-047   
-048     /* sign always positive */
-049     c->sign = MP_ZPOS;
-050   
-051     /* source alias */
-052     tmpa    = a->dp;
-053   
-054     /* destination alias */
-055     tmpc    = c->dp;
-056   
-057     /* if a is positive */
-058     if (a->sign == MP_ZPOS) \{
-059        /* add digit, after this we're propagating
-060         * the carry.
-061         */
-062        *tmpc   = *tmpa++ + b;
-063        mu      = *tmpc >> DIGIT_BIT;
-064        *tmpc++ &= MP_MASK;
-065   
-066        /* now handle rest of the digits */
-067        for (ix = 1; ix < a->used; ix++) \{
-068           *tmpc   = *tmpa++ + mu;
-069           mu      = *tmpc >> DIGIT_BIT;
-070           *tmpc++ &= MP_MASK;
-071        \}
-072        /* set final carry */
-073        ix++;
-074        *tmpc++  = mu;
-075   
-076        /* setup size */
-077        c->used = a->used + 1;
-078     \} else \{
-079        /* a was negative and |a| < b */
-080        c->used  = 1;
-081   
-082        /* the result is a single digit */
-083        if (a->used == 1) \{
-084           *tmpc++  =  b - a->dp[0];
-085        \} else \{
-086           *tmpc++  =  b;
-087        \}
-088   
-089        /* setup count so the clearing of oldused
-090         * can fall through correctly
-091         */
-092        ix       = 1;
-093     \}
-094   
-095     /* now zero to oldused */
-096     while (ix++ < oldused) \{
-097        *tmpc++ = 0;
-098     \}
-099     mp_clamp(c);
-100   
-101     return MP_OKAY;
-102   \}
-103   
-104   #endif
-\end{alltt}
-\end{small}
-
-Clever use of the letter 't'.
-
-\subsubsection{Subtraction}
-The single digit subtraction algorithm mp\_sub\_d is essentially the same except it uses mp\_sub to subtract the digit from the mp\_int.
-
-\subsection{Single Digit Multiplication}
-Single digit multiplication arises enough in division and radix conversion that it ought to be implement as a special case of the baseline
-multiplication algorithm.  Essentially this algorithm is a modified version of algorithm s\_mp\_mul\_digs where one of the multiplicands
-only has one digit.
-
-\begin{figure}[!here]
-\begin{small}
-\begin{center}
-\begin{tabular}{l}
-\hline Algorithm \textbf{mp\_mul\_d}. \\
-\textbf{Input}.   mp\_int $a$ and a mp\_digit $b$ \\
-\textbf{Output}.  $c = ab$ \\
-\hline \\
-1.  $pa \leftarrow a.used$ \\
-2.  Grow $c$ to at least $pa + 1$ digits. \\
-3.  $oldused \leftarrow c.used$ \\
-4.  $c.used \leftarrow pa + 1$ \\
-5.  $c.sign \leftarrow a.sign$ \\
-6.  $\mu \leftarrow 0$ \\
-7.  for $ix$ from $0$ to $pa - 1$ do \\
-\hspace{3mm}7.1  $\hat r \leftarrow \mu + a_{ix}b$ \\
-\hspace{3mm}7.2  $c_{ix} \leftarrow \hat r \mbox{ (mod }\beta\mbox{)}$ \\
-\hspace{3mm}7.3  $\mu \leftarrow \lfloor \hat r / \beta \rfloor$ \\
-8.  $c_{pa} \leftarrow \mu$ \\
-9.  for $ix$ from $pa + 1$ to $oldused$ do \\
-\hspace{3mm}9.1  $c_{ix} \leftarrow 0$ \\
-10.  Clamp excess digits of $c$. \\
-11.  Return(\textit{MP\_OKAY}). \\
-\hline
-\end{tabular}
-\end{center}
-\end{small}
-\caption{Algorithm mp\_mul\_d}
-\end{figure}
-\textbf{Algorithm mp\_mul\_d.}
-This algorithm quickly multiplies an mp\_int by a small single digit value.  It is specially tailored to the job and has a minimal of overhead.  
-Unlike the full multiplication algorithms this algorithm does not require any significnat temporary storage or memory allocations.  
-
-\vspace{+3mm}\begin{small}
-\hspace{-5.1mm}{\bf File}: bn\_mp\_mul\_d.c
-\vspace{-3mm}
-\begin{alltt}
-016   
-017   /* multiply by a digit */
-018   int
-019   mp_mul_d (mp_int * a, mp_digit b, mp_int * c)
-020   \{
-021     mp_digit u, *tmpa, *tmpc;
-022     mp_word  r;
-023     int      ix, res, olduse;
-024   
-025     /* make sure c is big enough to hold a*b */
-026     if (c->alloc < a->used + 1) \{
-027       if ((res = mp_grow (c, a->used + 1)) != MP_OKAY) \{
-028         return res;
-029       \}
-030     \}
-031   
-032     /* get the original destinations used count */
-033     olduse = c->used;
-034   
-035     /* set the sign */
-036     c->sign = a->sign;
-037   
-038     /* alias for a->dp [source] */
-039     tmpa = a->dp;
-040   
-041     /* alias for c->dp [dest] */
-042     tmpc = c->dp;
-043   
-044     /* zero carry */
-045     u = 0;
-046   
-047     /* compute columns */
-048     for (ix = 0; ix < a->used; ix++) \{
-049       /* compute product and carry sum for this term */
-050       r       = ((mp_word) u) + ((mp_word)*tmpa++) * ((mp_word)b);
-051   
-052       /* mask off higher bits to get a single digit */
-053       *tmpc++ = (mp_digit) (r & ((mp_word) MP_MASK));
-054   
-055       /* send carry into next iteration */
-056       u       = (mp_digit) (r >> ((mp_word) DIGIT_BIT));
-057     \}
-058   
-059     /* store final carry [if any] and increment ix offset  */
-060     *tmpc++ = u;
-061     ++ix;
-062   
-063     /* now zero digits above the top */
-064     while (ix++ < olduse) \{
-065        *tmpc++ = 0;
-066     \}
-067   
-068     /* set used count */
-069     c->used = a->used + 1;
-070     mp_clamp(c);
-071   
-072     return MP_OKAY;
-073   \}
-074   #endif
-\end{alltt}
-\end{small}
-
-In this implementation the destination $c$ may point to the same mp\_int as the source $a$ since the result is written after the digit is 
-read from the source.  This function uses pointer aliases $tmpa$ and $tmpc$ for the digits of $a$ and $c$ respectively.  
-
-\subsection{Single Digit Division}
-Like the single digit multiplication algorithm, single digit division is also a fairly common algorithm used in radix conversion.  Since the
-divisor is only a single digit a specialized variant of the division algorithm can be used to compute the quotient.  
-
-\newpage\begin{figure}[!here]
-\begin{small}
-\begin{center}
-\begin{tabular}{l}
-\hline Algorithm \textbf{mp\_div\_d}. \\
-\textbf{Input}.   mp\_int $a$ and a mp\_digit $b$ \\
-\textbf{Output}.  $c = \lfloor a / b \rfloor, d = a - cb$ \\
-\hline \\
-1.  If $b = 0$ then return(\textit{MP\_VAL}).\\
-2.  If $b = 3$ then use algorithm mp\_div\_3 instead. \\
-3.  Init $q$ to $a.used$ digits.  \\
-4.  $q.used \leftarrow a.used$ \\
-5.  $q.sign \leftarrow a.sign$ \\
-6.  $\hat w \leftarrow 0$ \\
-7.  for $ix$ from $a.used - 1$ down to $0$ do \\
-\hspace{3mm}7.1  $\hat w \leftarrow \hat w \beta + a_{ix}$ \\
-\hspace{3mm}7.2  If $\hat w \ge b$ then \\
-\hspace{6mm}7.2.1  $t \leftarrow \lfloor \hat w / b \rfloor$ \\
-\hspace{6mm}7.2.2  $\hat w \leftarrow \hat w \mbox{ (mod }b\mbox{)}$ \\
-\hspace{3mm}7.3  else\\
-\hspace{6mm}7.3.1  $t \leftarrow 0$ \\
-\hspace{3mm}7.4  $q_{ix} \leftarrow t$ \\
-8.  $d \leftarrow \hat w$ \\
-9.  Clamp excess digits of $q$. \\
-10.  $c \leftarrow q$ \\
-11.  Return(\textit{MP\_OKAY}). \\
-\hline
-\end{tabular}
-\end{center}
-\end{small}
-\caption{Algorithm mp\_div\_d}
-\end{figure}
-\textbf{Algorithm mp\_div\_d.}
-This algorithm divides the mp\_int $a$ by the single mp\_digit $b$ using an optimized approach.  Essentially in every iteration of the
-algorithm another digit of the dividend is reduced and another digit of quotient produced.  Provided $b < \beta$ the value of $\hat w$
-after step 7.1 will be limited such that $0 \le \lfloor \hat w / b \rfloor < \beta$.  
-
-If the divisor $b$ is equal to three a variant of this algorithm is used which is called mp\_div\_3.  It replaces the division by three with
-a multiplication by $\lfloor \beta / 3 \rfloor$ and the appropriate shift and residual fixup.  In essence it is much like the Barrett reduction
-from chapter seven.  
-
-\vspace{+3mm}\begin{small}
-\hspace{-5.1mm}{\bf File}: bn\_mp\_div\_d.c
-\vspace{-3mm}
-\begin{alltt}
-016   
-017   static int s_is_power_of_two(mp_digit b, int *p)
-018   \{
-019      int x;
-020   
-021      for (x = 1; x < DIGIT_BIT; x++) \{
-022         if (b == (((mp_digit)1)<<x)) \{
-023            *p = x;
-024            return 1;
-025         \}
-026      \}
-027      return 0;
-028   \}
-029   
-030   /* single digit division (based on routine from MPI) */
-031   int mp_div_d (mp_int * a, mp_digit b, mp_int * c, mp_digit * d)
-032   \{
-033     mp_int  q;
-034     mp_word w;
-035     mp_digit t;
-036     int     res, ix;
-037   
-038     /* cannot divide by zero */
-039     if (b == 0) \{
-040        return MP_VAL;
-041     \}
-042   
-043     /* quick outs */
-044     if (b == 1 || mp_iszero(a) == 1) \{
-045        if (d != NULL) \{
-046           *d = 0;
-047        \}
-048        if (c != NULL) \{
-049           return mp_copy(a, c);
-050        \}
-051        return MP_OKAY;
-052     \}
-053   
-054     /* power of two ? */
-055     if (s_is_power_of_two(b, &ix) == 1) \{
-056        if (d != NULL) \{
-057           *d = a->dp[0] & ((((mp_digit)1)<<ix) - 1);
-058        \}
-059        if (c != NULL) \{
-060           return mp_div_2d(a, ix, c, NULL);
-061        \}
-062        return MP_OKAY;
-063     \}
-064   
-065   #ifdef BN_MP_DIV_3_C
-066     /* three? */
-067     if (b == 3) \{
-068        return mp_div_3(a, c, d);
-069     \}
-070   #endif
-071   
-072     /* no easy answer [c'est la vie].  Just division */
-073     if ((res = mp_init_size(&q, a->used)) != MP_OKAY) \{
-074        return res;
-075     \}
-076     
-077     q.used = a->used;
-078     q.sign = a->sign;
-079     w = 0;
-080     for (ix = a->used - 1; ix >= 0; ix--) \{
-081        w = (w << ((mp_word)DIGIT_BIT)) | ((mp_word)a->dp[ix]);
-082        
-083        if (w >= b) \{
-084           t = (mp_digit)(w / b);
-085           w -= ((mp_word)t) * ((mp_word)b);
-086         \} else \{
-087           t = 0;
-088         \}
-089         q.dp[ix] = (mp_digit)t;
-090     \}
-091     
-092     if (d != NULL) \{
-093        *d = (mp_digit)w;
-094     \}
-095     
-096     if (c != NULL) \{
-097        mp_clamp(&q);
-098        mp_exch(&q, c);
-099     \}
-100     mp_clear(&q);
-101     
-102     return res;
-103   \}
-104   
-105   #endif
-\end{alltt}
-\end{small}
-
-Like the implementation of algorithm mp\_div this algorithm allows either of the quotient or remainder to be passed as a \textbf{NULL} pointer to
-indicate the respective value is not required.  This allows a trivial single digit modular reduction algorithm, mp\_mod\_d to be created.
-
-The division and remainder on lines 43 and @45,%@ can be replaced often by a single division on most processors.  For example, the 32-bit x86 based 
-processors can divide a 64-bit quantity by a 32-bit quantity and produce the quotient and remainder simultaneously.  Unfortunately the GCC 
-compiler does not recognize that optimization and will actually produce two function calls to find the quotient and remainder respectively.  
-
-\subsection{Single Digit Root Extraction}
-
-Finding the $n$'th root of an integer is fairly easy as far as numerical analysis is concerned.  Algorithms such as the Newton-Raphson approximation 
-(\ref{eqn:newton}) series will converge very quickly to a root for any continuous function $f(x)$.  
-
-\begin{equation}
-x_{i+1} = x_i - {f(x_i) \over f'(x_i)}
-\label{eqn:newton}
-\end{equation}
-
-In this case the $n$'th root is desired and $f(x) = x^n - a$ where $a$ is the integer of which the root is desired.  The derivative of $f(x)$ is 
-simply $f'(x) = nx^{n - 1}$.  Of particular importance is that this algorithm will be used over the integers not over the a more continuous domain
-such as the real numbers.  As a result the root found can be above the true root by few and must be manually adjusted.  Ideally at the end of the 
-algorithm the $n$'th root $b$ of an integer $a$ is desired such that $b^n \le a$.  
-
-\newpage\begin{figure}[!here]
-\begin{small}
-\begin{center}
-\begin{tabular}{l}
-\hline Algorithm \textbf{mp\_n\_root}. \\
-\textbf{Input}.   mp\_int $a$ and a mp\_digit $b$ \\
-\textbf{Output}.  $c^b \le a$ \\
-\hline \\
-1.  If $b$ is even and $a.sign = MP\_NEG$ return(\textit{MP\_VAL}). \\
-2.  $sign \leftarrow a.sign$ \\
-3.  $a.sign \leftarrow MP\_ZPOS$ \\
-4.  t$2 \leftarrow 2$ \\
-5.  Loop \\
-\hspace{3mm}5.1  t$1 \leftarrow $ t$2$ \\
-\hspace{3mm}5.2  t$3 \leftarrow $ t$1^{b - 1}$ \\
-\hspace{3mm}5.3  t$2 \leftarrow $ t$3 $ $\cdot$ t$1$ \\
-\hspace{3mm}5.4  t$2 \leftarrow $ t$2 - a$ \\
-\hspace{3mm}5.5  t$3 \leftarrow $ t$3 \cdot b$ \\
-\hspace{3mm}5.6  t$3 \leftarrow \lfloor $t$2 / $t$3 \rfloor$ \\
-\hspace{3mm}5.7  t$2 \leftarrow $ t$1 - $ t$3$ \\
-\hspace{3mm}5.8  If t$1 \ne $ t$2$ then goto step 5.  \\
-6.  Loop \\
-\hspace{3mm}6.1  t$2 \leftarrow $ t$1^b$ \\
-\hspace{3mm}6.2  If t$2 > a$ then \\
-\hspace{6mm}6.2.1  t$1 \leftarrow $ t$1 - 1$ \\
-\hspace{6mm}6.2.2  Goto step 6. \\
-7.  $a.sign \leftarrow sign$ \\
-8.  $c \leftarrow $ t$1$ \\
-9.  $c.sign \leftarrow sign$  \\
-10.  Return(\textit{MP\_OKAY}).  \\
-\hline
-\end{tabular}
-\end{center}
-\end{small}
-\caption{Algorithm mp\_n\_root}
-\end{figure}
-\textbf{Algorithm mp\_n\_root.}
-This algorithm finds the integer $n$'th root of an input using the Newton-Raphson approach.  It is partially optimized based on the observation
-that the numerator of ${f(x) \over f'(x)}$ can be derived from a partial denominator.  That is at first the denominator is calculated by finding
-$x^{b - 1}$.  This value can then be multiplied by $x$ and have $a$ subtracted from it to find the numerator.  This saves a total of $b - 1$ 
-multiplications by t$1$ inside the loop.  
-
-The initial value of the approximation is t$2 = 2$ which allows the algorithm to start with very small values and quickly converge on the
-root.  Ideally this algorithm is meant to find the $n$'th root of an input where $n$ is bounded by $2 \le n \le 5$.  
-
-\vspace{+3mm}\begin{small}
-\hspace{-5.1mm}{\bf File}: bn\_mp\_n\_root.c
-\vspace{-3mm}
-\begin{alltt}
-016   
-017   /* find the n'th root of an integer 
-018    *
-019    * Result found such that (c)**b <= a and (c+1)**b > a 
-020    *
-021    * This algorithm uses Newton's approximation 
-022    * x[i+1] = x[i] - f(x[i])/f'(x[i]) 
-023    * which will find the root in log(N) time where 
-024    * each step involves a fair bit.  This is not meant to 
-025    * find huge roots [square and cube, etc].
-026    */
-027   int mp_n_root (mp_int * a, mp_digit b, mp_int * c)
-028   \{
-029     mp_int  t1, t2, t3;
-030     int     res, neg;
-031   
-032     /* input must be positive if b is even */
-033     if ((b & 1) == 0 && a->sign == MP_NEG) \{
-034       return MP_VAL;
-035     \}
-036   
-037     if ((res = mp_init (&t1)) != MP_OKAY) \{
-038       return res;
-039     \}
-040   
-041     if ((res = mp_init (&t2)) != MP_OKAY) \{
-042       goto LBL_T1;
-043     \}
-044   
-045     if ((res = mp_init (&t3)) != MP_OKAY) \{
-046       goto LBL_T2;
-047     \}
-048   
-049     /* if a is negative fudge the sign but keep track */
-050     neg     = a->sign;
-051     a->sign = MP_ZPOS;
-052   
-053     /* t2 = 2 */
-054     mp_set (&t2, 2);
-055   
-056     do \{
-057       /* t1 = t2 */
-058       if ((res = mp_copy (&t2, &t1)) != MP_OKAY) \{
-059         goto LBL_T3;
-060       \}
-061   
-062       /* t2 = t1 - ((t1**b - a) / (b * t1**(b-1))) */
-063       
-064       /* t3 = t1**(b-1) */
-065       if ((res = mp_expt_d (&t1, b - 1, &t3)) != MP_OKAY) \{   
-066         goto LBL_T3;
-067       \}
-068   
-069       /* numerator */
-070       /* t2 = t1**b */
-071       if ((res = mp_mul (&t3, &t1, &t2)) != MP_OKAY) \{    
-072         goto LBL_T3;
-073       \}
-074   
-075       /* t2 = t1**b - a */
-076       if ((res = mp_sub (&t2, a, &t2)) != MP_OKAY) \{  
-077         goto LBL_T3;
-078       \}
-079   
-080       /* denominator */
-081       /* t3 = t1**(b-1) * b  */
-082       if ((res = mp_mul_d (&t3, b, &t3)) != MP_OKAY) \{    
-083         goto LBL_T3;
-084       \}
-085   
-086       /* t3 = (t1**b - a)/(b * t1**(b-1)) */
-087       if ((res = mp_div (&t2, &t3, &t3, NULL)) != MP_OKAY) \{  
-088         goto LBL_T3;
-089       \}
-090   
-091       if ((res = mp_sub (&t1, &t3, &t2)) != MP_OKAY) \{
-092         goto LBL_T3;
-093       \}
-094     \}  while (mp_cmp (&t1, &t2) != MP_EQ);
-095   
-096     /* result can be off by a few so check */
-097     for (;;) \{
-098       if ((res = mp_expt_d (&t1, b, &t2)) != MP_OKAY) \{
-099         goto LBL_T3;
-100       \}
-101   
-102       if (mp_cmp (&t2, a) == MP_GT) \{
-103         if ((res = mp_sub_d (&t1, 1, &t1)) != MP_OKAY) \{
-104            goto LBL_T3;
-105         \}
-106       \} else \{
-107         break;
-108       \}
-109     \}
-110   
-111     /* reset the sign of a first */
-112     a->sign = neg;
-113   
-114     /* set the result */
-115     mp_exch (&t1, c);
-116   
-117     /* set the sign of the result */
-118     c->sign = neg;
-119   
-120     res = MP_OKAY;
-121   
-122   LBL_T3:mp_clear (&t3);
-123   LBL_T2:mp_clear (&t2);
-124   LBL_T1:mp_clear (&t1);
-125     return res;
-126   \}
-127   #endif
-\end{alltt}
-\end{small}
-
-\section{Random Number Generation}
-
-Random numbers come up in a variety of activities from public key cryptography to simple simulations and various randomized algorithms.  Pollard-Rho 
-factoring for example, can make use of random values as starting points to find factors of a composite integer.  In this case the algorithm presented
-is solely for simulations and not intended for cryptographic use.  
-
-\newpage\begin{figure}[!here]
-\begin{small}
-\begin{center}
-\begin{tabular}{l}
-\hline Algorithm \textbf{mp\_rand}. \\
-\textbf{Input}.   An integer $b$ \\
-\textbf{Output}.  A pseudo-random number of $b$ digits \\
-\hline \\
-1.  $a \leftarrow 0$ \\
-2.  If $b \le 0$ return(\textit{MP\_OKAY}) \\
-3.  Pick a non-zero random digit $d$. \\
-4.  $a \leftarrow a + d$ \\
-5.  for $ix$ from 1 to $d - 1$ do \\
-\hspace{3mm}5.1  $a \leftarrow a \cdot \beta$ \\
-\hspace{3mm}5.2  Pick a random digit $d$. \\
-\hspace{3mm}5.3  $a \leftarrow a + d$ \\
-6.  Return(\textit{MP\_OKAY}). \\
-\hline
-\end{tabular}
-\end{center}
-\end{small}
-\caption{Algorithm mp\_rand}
-\end{figure}
-\textbf{Algorithm mp\_rand.}
-This algorithm produces a pseudo-random integer of $b$ digits.  By ensuring that the first digit is non-zero the algorithm also guarantees that the
-final result has at least $b$ digits.  It relies heavily on a third-part random number generator which should ideally generate uniformly all of
-the integers from $0$ to $\beta - 1$.  
-
-\vspace{+3mm}\begin{small}
-\hspace{-5.1mm}{\bf File}: bn\_mp\_rand.c
-\vspace{-3mm}
-\begin{alltt}
-016   
-017   /* makes a pseudo-random int of a given size */
-018   int
-019   mp_rand (mp_int * a, int digits)
-020   \{
-021     int     res;
-022     mp_digit d;
-023   
-024     mp_zero (a);
-025     if (digits <= 0) \{
-026       return MP_OKAY;
-027     \}
-028   
-029     /* first place a random non-zero digit */
-030     do \{
-031       d = ((mp_digit) abs (rand ())) & MP_MASK;
-032     \} while (d == 0);
-033   
-034     if ((res = mp_add_d (a, d, a)) != MP_OKAY) \{
-035       return res;
-036     \}
-037   
-038     while (--digits > 0) \{
-039       if ((res = mp_lshd (a, 1)) != MP_OKAY) \{
-040         return res;
-041       \}
-042   
-043       if ((res = mp_add_d (a, ((mp_digit) abs (rand ())), a)) != MP_OKAY) \{
-044         return res;
-045       \}
-046     \}
-047   
-048     return MP_OKAY;
-049   \}
-050   #endif
-\end{alltt}
-\end{small}
-
-\section{Formatted Representations}
-The ability to emit a radix-$n$ textual representation of an integer is useful for interacting with human parties.  For example, the ability to
-be given a string of characters such as ``114585'' and turn it into the radix-$\beta$ equivalent would make it easier to enter numbers
-into a program.
-
-\subsection{Reading Radix-n Input}
-For the purposes of this text we will assume that a simple lower ASCII map (\ref{fig:ASC}) is used for the values of from $0$ to $63$ to 
-printable characters.  For example, when the character ``N'' is read it represents the integer $23$.  The first $16$ characters of the
-map are for the common representations up to hexadecimal.  After that they match the ``base64'' encoding scheme which are suitable chosen
-such that they are printable.  While outputting as base64 may not be too helpful for human operators it does allow communication via non binary
-mediums.
-
-\newpage\begin{figure}[here]
-\begin{center}
-\begin{tabular}{cc|cc|cc|cc}
-\hline \textbf{Value} & \textbf{Char} & \textbf{Value} & \textbf{Char} & \textbf{Value} & \textbf{Char} &  \textbf{Value} & \textbf{Char} \\
-\hline 
-0 & 0 & 1 & 1 & 2 & 2 & 3 & 3 \\
-4 & 4 & 5 & 5 & 6 & 6 & 7 & 7 \\
-8 & 8 & 9 & 9 & 10 & A & 11 & B \\
-12 & C & 13 & D & 14 & E & 15 & F \\
-16 & G & 17 & H & 18 & I & 19 & J \\
-20 & K & 21 & L & 22 & M & 23 & N \\
-24 & O & 25 & P & 26 & Q & 27 & R \\
-28 & S & 29 & T & 30 & U & 31 & V \\
-32 & W & 33 & X & 34 & Y & 35 & Z \\
-36 & a & 37 & b & 38 & c & 39 & d \\
-40 & e & 41 & f & 42 & g & 43 & h \\
-44 & i & 45 & j & 46 & k & 47 & l \\
-48 & m & 49 & n & 50 & o & 51 & p \\
-52 & q & 53 & r & 54 & s & 55 & t \\
-56 & u & 57 & v & 58 & w & 59 & x \\
-60 & y & 61 & z & 62 & $+$ & 63 & $/$ \\
-\hline
-\end{tabular}
-\end{center}
-\caption{Lower ASCII Map}
-\label{fig:ASC}
-\end{figure}
-
-\newpage\begin{figure}[!here]
-\begin{small}
-\begin{center}
-\begin{tabular}{l}
-\hline Algorithm \textbf{mp\_read\_radix}. \\
-\textbf{Input}.   A string $str$ of length $sn$ and radix $r$. \\
-\textbf{Output}.  The radix-$\beta$ equivalent mp\_int. \\
-\hline \\
-1.  If $r < 2$ or $r > 64$ return(\textit{MP\_VAL}). \\
-2.  $ix \leftarrow 0$ \\
-3.  If $str_0 =$ ``-'' then do \\
-\hspace{3mm}3.1  $ix \leftarrow ix + 1$ \\
-\hspace{3mm}3.2  $sign \leftarrow MP\_NEG$ \\
-4.  else \\
-\hspace{3mm}4.1  $sign \leftarrow MP\_ZPOS$ \\
-5.  $a \leftarrow 0$ \\
-6.  for $iy$ from $ix$ to $sn - 1$ do \\
-\hspace{3mm}6.1  Let $y$ denote the position in the map of $str_{iy}$. \\
-\hspace{3mm}6.2  If $str_{iy}$ is not in the map or $y \ge r$ then goto step 7. \\
-\hspace{3mm}6.3  $a \leftarrow a \cdot r$ \\
-\hspace{3mm}6.4  $a \leftarrow a + y$ \\
-7.  If $a \ne 0$ then $a.sign \leftarrow sign$ \\
-8.  Return(\textit{MP\_OKAY}). \\
-\hline
-\end{tabular}
-\end{center}
-\end{small}
-\caption{Algorithm mp\_read\_radix}
-\end{figure}
-\textbf{Algorithm mp\_read\_radix.}
-This algorithm will read an ASCII string and produce the radix-$\beta$ mp\_int representation of the same integer.  A minus symbol ``-'' may precede the 
-string  to indicate the value is negative, otherwise it is assumed to be positive.  The algorithm will read up to $sn$ characters from the input
-and will stop when it reads a character it cannot map the algorithm stops reading characters from the string.  This allows numbers to be embedded
-as part of larger input without any significant problem.
-
-\vspace{+3mm}\begin{small}
-\hspace{-5.1mm}{\bf File}: bn\_mp\_read\_radix.c
-\vspace{-3mm}
-\begin{alltt}
-016   
-017   /* read a string [ASCII] in a given radix */
-018   int mp_read_radix (mp_int * a, const char *str, int radix)
-019   \{
-020     int     y, res, neg;
-021     char    ch;
-022   
-023     /* make sure the radix is ok */
-024     if (radix < 2 || radix > 64) \{
-025       return MP_VAL;
-026     \}
-027   
-028     /* if the leading digit is a 
-029      * minus set the sign to negative. 
-030      */
-031     if (*str == '-') \{
-032       ++str;
-033       neg = MP_NEG;
-034     \} else \{
-035       neg = MP_ZPOS;
-036     \}
-037   
-038     /* set the integer to the default of zero */
-039     mp_zero (a);
-040     
-041     /* process each digit of the string */
-042     while (*str) \{
-043       /* if the radix < 36 the conversion is case insensitive
-044        * this allows numbers like 1AB and 1ab to represent the same  value
-045        * [e.g. in hex]
-046        */
-047       ch = (char) ((radix < 36) ? toupper (*str) : *str);
-048       for (y = 0; y < 64; y++) \{
-049         if (ch == mp_s_rmap[y]) \{
-050            break;
-051         \}
-052       \}
-053   
-054       /* if the char was found in the map 
-055        * and is less than the given radix add it
-056        * to the number, otherwise exit the loop. 
-057        */
-058       if (y < radix) \{
-059         if ((res = mp_mul_d (a, (mp_digit) radix, a)) != MP_OKAY) \{
-060            return res;
-061         \}
-062         if ((res = mp_add_d (a, (mp_digit) y, a)) != MP_OKAY) \{
-063            return res;
-064         \}
-065       \} else \{
-066         break;
-067       \}
-068       ++str;
-069     \}
-070     
-071     /* set the sign only if a != 0 */
-072     if (mp_iszero(a) != 1) \{
-073        a->sign = neg;
-074     \}
-075     return MP_OKAY;
-076   \}
-077   #endif
-\end{alltt}
-\end{small}
-
-\subsection{Generating Radix-$n$ Output}
-Generating radix-$n$ output is fairly trivial with a division and remainder algorithm.  
-
-\newpage\begin{figure}[!here]
-\begin{small}
-\begin{center}
-\begin{tabular}{l}
-\hline Algorithm \textbf{mp\_toradix}. \\
-\textbf{Input}.   A mp\_int $a$ and an integer $r$\\
-\textbf{Output}.  The radix-$r$ representation of $a$ \\
-\hline \\
-1.  If $r < 2$ or $r > 64$ return(\textit{MP\_VAL}). \\
-2.  If $a = 0$ then $str = $ ``$0$'' and return(\textit{MP\_OKAY}).  \\
-3.  $t \leftarrow a$ \\
-4.  $str \leftarrow$ ``'' \\
-5.  if $t.sign = MP\_NEG$ then \\
-\hspace{3mm}5.1  $str \leftarrow str + $ ``-'' \\
-\hspace{3mm}5.2  $t.sign = MP\_ZPOS$ \\
-6.  While ($t \ne 0$) do \\
-\hspace{3mm}6.1  $d \leftarrow t \mbox{ (mod }r\mbox{)}$ \\
-\hspace{3mm}6.2  $t \leftarrow \lfloor t / r \rfloor$ \\
-\hspace{3mm}6.3  Look up $d$ in the map and store the equivalent character in $y$. \\
-\hspace{3mm}6.4  $str \leftarrow str + y$ \\
-7.  If $str_0 = $``$-$'' then \\
-\hspace{3mm}7.1  Reverse the digits $str_1, str_2, \ldots str_n$. \\
-8.  Otherwise \\
-\hspace{3mm}8.1  Reverse the digits $str_0, str_1, \ldots str_n$. \\
-9.  Return(\textit{MP\_OKAY}).\\
-\hline
-\end{tabular}
-\end{center}
-\end{small}
-\caption{Algorithm mp\_toradix}
-\end{figure}
-\textbf{Algorithm mp\_toradix.}
-This algorithm computes the radix-$r$ representation of an mp\_int $a$.  The ``digits'' of the representation are extracted by reducing 
-successive powers of $\lfloor a / r^k \rfloor$ the input modulo $r$ until $r^k > a$.  Note that instead of actually dividing by $r^k$ in
-each iteration the quotient $\lfloor a / r \rfloor$ is saved for the next iteration.  As a result a series of trivial $n \times 1$ divisions
-are required instead of a series of $n \times k$ divisions.  One design flaw of this approach is that the digits are produced in the reverse order 
-(see~\ref{fig:mpradix}).  To remedy this flaw the digits must be swapped or simply ``reversed''.
-
-\begin{figure}
-\begin{center}
-\begin{tabular}{|c|c|c|}
-\hline \textbf{Value of $a$} & \textbf{Value of $d$} & \textbf{Value of $str$} \\
-\hline $1234$ & -- & -- \\
-\hline $123$  & $4$ & ``4'' \\
-\hline $12$   & $3$ & ``43'' \\
-\hline $1$    & $2$ & ``432'' \\
-\hline $0$    & $1$ & ``4321'' \\
-\hline
-\end{tabular}
-\end{center}
-\caption{Example of Algorithm mp\_toradix.}
-\label{fig:mpradix}
-\end{figure}
-
-\vspace{+3mm}\begin{small}
-\hspace{-5.1mm}{\bf File}: bn\_mp\_toradix.c
-\vspace{-3mm}
-\begin{alltt}
-016   
-017   /* stores a bignum as a ASCII string in a given radix (2..64) */
-018   int mp_toradix (mp_int * a, char *str, int radix)
-019   \{
-020     int     res, digs;
-021     mp_int  t;
-022     mp_digit d;
-023     char   *_s = str;
-024   
-025     /* check range of the radix */
-026     if (radix < 2 || radix > 64) \{
-027       return MP_VAL;
-028     \}
-029   
-030     /* quick out if its zero */
-031     if (mp_iszero(a) == 1) \{
-032        *str++ = '0';
-033        *str = '\symbol{92}0';
-034        return MP_OKAY;
-035     \}
-036   
-037     if ((res = mp_init_copy (&t, a)) != MP_OKAY) \{
-038       return res;
-039     \}
-040   
-041     /* if it is negative output a - */
-042     if (t.sign == MP_NEG) \{
-043       ++_s;
-044       *str++ = '-';
-045       t.sign = MP_ZPOS;
-046     \}
-047   
-048     digs = 0;
-049     while (mp_iszero (&t) == 0) \{
-050       if ((res = mp_div_d (&t, (mp_digit) radix, &t, &d)) != MP_OKAY) \{
-051         mp_clear (&t);
-052         return res;
-053       \}
-054       *str++ = mp_s_rmap[d];
-055       ++digs;
-056     \}
-057   
-058     /* reverse the digits of the string.  In this case _s points
-059      * to the first digit [exluding the sign] of the number]
-060      */
-061     bn_reverse ((unsigned char *)_s, digs);
-062   
-063     /* append a NULL so the string is properly terminated */
-064     *str = '\symbol{92}0';
-065   
-066     mp_clear (&t);
-067     return MP_OKAY;
-068   \}
-069   
-070   #endif
-\end{alltt}
-\end{small}
-
-\chapter{Number Theoretic Algorithms}
-This chapter discusses several fundamental number theoretic algorithms such as the greatest common divisor, least common multiple and Jacobi 
-symbol computation.  These algorithms arise as essential components in several key cryptographic algorithms such as the RSA public key algorithm and
-various Sieve based factoring algorithms.
-
-\section{Greatest Common Divisor}
-The greatest common divisor of two integers $a$ and $b$, often denoted as $(a, b)$ is the largest integer $k$ that is a proper divisor of
-both $a$ and $b$.  That is, $k$ is the largest integer such that $0 \equiv a \mbox{ (mod }k\mbox{)}$ and $0 \equiv b \mbox{ (mod }k\mbox{)}$ occur
-simultaneously.
-
-The most common approach (cite) is to reduce one input modulo another.  That is if $a$ and $b$ are divisible by some integer $k$ and if $qa + r = b$ then
-$r$ is also divisible by $k$.  The reduction pattern follows $\left < a , b \right > \rightarrow \left < b, a \mbox{ mod } b \right >$.  
-
-\newpage\begin{figure}[!here]
-\begin{small}
-\begin{center}
-\begin{tabular}{l}
-\hline Algorithm \textbf{Greatest Common Divisor (I)}. \\
-\textbf{Input}.   Two positive integers $a$ and $b$ greater than zero. \\
-\textbf{Output}.  The greatest common divisor $(a, b)$.  \\
-\hline \\
-1.  While ($b > 0$) do \\
-\hspace{3mm}1.1  $r \leftarrow a \mbox{ (mod }b\mbox{)}$ \\
-\hspace{3mm}1.2  $a \leftarrow b$ \\
-\hspace{3mm}1.3  $b \leftarrow r$ \\
-2.  Return($a$). \\
-\hline
-\end{tabular}
-\end{center}
-\end{small}
-\caption{Algorithm Greatest Common Divisor (I)}
-\label{fig:gcd1}
-\end{figure}
-
-This algorithm will quickly converge on the greatest common divisor since the residue $r$ tends diminish rapidly.  However, divisions are
-relatively expensive operations to perform and should ideally be avoided.  There is another approach based on a similar relationship of 
-greatest common divisors.  The faster approach is based on the observation that if $k$ divides both $a$ and $b$ it will also divide $a - b$.  
-In particular, we would like $a - b$ to decrease in magnitude which implies that $b \ge a$.  
-
-\begin{figure}[!here]
-\begin{small}
-\begin{center}
-\begin{tabular}{l}
-\hline Algorithm \textbf{Greatest Common Divisor (II)}. \\
-\textbf{Input}.   Two positive integers $a$ and $b$ greater than zero. \\
-\textbf{Output}.  The greatest common divisor $(a, b)$.  \\
-\hline \\
-1.  While ($b > 0$) do \\
-\hspace{3mm}1.1  Swap $a$ and $b$ such that $a$ is the smallest of the two. \\
-\hspace{3mm}1.2  $b \leftarrow b - a$ \\
-2.  Return($a$). \\
-\hline
-\end{tabular}
-\end{center}
-\end{small}
-\caption{Algorithm Greatest Common Divisor (II)}
-\label{fig:gcd2}
-\end{figure}
-
-\textbf{Proof} \textit{Algorithm~\ref{fig:gcd2} will return the greatest common divisor of $a$ and $b$.}
-The algorithm in figure~\ref{fig:gcd2} will eventually terminate since $b \ge a$ the subtraction in step 1.2 will be a value less than $b$.  In other
-words in every iteration that tuple $\left < a, b \right >$ decrease in magnitude until eventually $a = b$.  Since both $a$ and $b$ are always 
-divisible by the greatest common divisor (\textit{until the last iteration}) and in the last iteration of the algorithm $b = 0$, therefore, in the 
-second to last iteration of the algorithm $b = a$ and clearly $(a, a) = a$ which concludes the proof.  \textbf{QED}.
-
-As a matter of practicality algorithm \ref{fig:gcd1} decreases far too slowly to be useful.  Specially if $b$ is much larger than $a$ such that 
-$b - a$ is still very much larger than $a$.  A simple addition to the algorithm is to divide $b - a$ by a power of some integer $p$ which does
-not divide the greatest common divisor but will divide $b - a$.  In this case ${b - a} \over p$ is also an integer and still divisible by
-the greatest common divisor.
-
-However, instead of factoring $b - a$ to find a suitable value of $p$ the powers of $p$ can be removed from $a$ and $b$ that are in common first.  
-Then inside the loop whenever $b - a$ is divisible by some power of $p$ it can be safely removed.  
-
-\begin{figure}[!here]
-\begin{small}
-\begin{center}
-\begin{tabular}{l}
-\hline Algorithm \textbf{Greatest Common Divisor (III)}. \\
-\textbf{Input}.   Two positive integers $a$ and $b$ greater than zero. \\
-\textbf{Output}.  The greatest common divisor $(a, b)$.  \\
-\hline \\
-1.  $k \leftarrow 0$ \\
-2.  While $a$ and $b$ are both divisible by $p$ do \\
-\hspace{3mm}2.1  $a \leftarrow \lfloor a / p \rfloor$ \\
-\hspace{3mm}2.2  $b \leftarrow \lfloor b / p \rfloor$ \\
-\hspace{3mm}2.3  $k \leftarrow k + 1$ \\
-3.  While $a$ is divisible by $p$ do \\
-\hspace{3mm}3.1  $a \leftarrow \lfloor a / p \rfloor$ \\
-4.  While $b$ is divisible by $p$ do \\
-\hspace{3mm}4.1  $b \leftarrow \lfloor b / p \rfloor$ \\
-5.  While ($b > 0$) do \\
-\hspace{3mm}5.1  Swap $a$ and $b$ such that $a$ is the smallest of the two. \\
-\hspace{3mm}5.2  $b \leftarrow b - a$ \\
-\hspace{3mm}5.3  While $b$ is divisible by $p$ do \\
-\hspace{6mm}5.3.1  $b \leftarrow \lfloor b / p \rfloor$ \\
-6.  Return($a \cdot p^k$). \\
-\hline
-\end{tabular}
-\end{center}
-\end{small}
-\caption{Algorithm Greatest Common Divisor (III)}
-\label{fig:gcd3}
-\end{figure}
-
-This algorithm is based on the first except it removes powers of $p$ first and inside the main loop to ensure the tuple $\left < a, b \right >$ 
-decreases more rapidly.  The first loop on step two removes powers of $p$ that are in common.  A count, $k$, is kept which will present a common
-divisor of $p^k$.  After step two the remaining common divisor of $a$ and $b$ cannot be divisible by $p$.  This means that $p$ can be safely 
-divided out of the difference $b - a$ so long as the division leaves no remainder.  
-
-In particular the value of $p$ should be chosen such that the division on step 5.3.1 occur often.  It also helps that division by $p$ be easy
-to compute.  The ideal choice of $p$ is two since division by two amounts to a right logical shift.  Another important observation is that by
-step five both $a$ and $b$ are odd.  Therefore, the diffrence $b - a$ must be even which means that each iteration removes one bit from the 
-largest of the pair.
-
-\subsection{Complete Greatest Common Divisor}
-The algorithms presented so far cannot handle inputs which are zero or negative.  The following algorithm can handle all input cases properly
-and will produce the greatest common divisor.
-
-\newpage\begin{figure}[!here]
-\begin{small}
-\begin{center}
-\begin{tabular}{l}
-\hline Algorithm \textbf{mp\_gcd}. \\
-\textbf{Input}.   mp\_int $a$ and $b$ \\
-\textbf{Output}.  The greatest common divisor $c = (a, b)$.  \\
-\hline \\
-1.  If $a = 0$ and $b \ne 0$ then \\
-\hspace{3mm}1.1  $c \leftarrow b$ \\
-\hspace{3mm}1.2  Return(\textit{MP\_OKAY}). \\
-2.  If $a \ne 0$ and $b = 0$ then \\
-\hspace{3mm}2.1  $c \leftarrow a$ \\
-\hspace{3mm}2.2  Return(\textit{MP\_OKAY}). \\
-3.  If $a = b = 0$ then \\
-\hspace{3mm}3.1  $c \leftarrow 1$ \\
-\hspace{3mm}3.2  Return(\textit{MP\_OKAY}). \\
-4.  $u \leftarrow \vert a \vert, v \leftarrow \vert b \vert$ \\
-5.  $k \leftarrow 0$ \\
-6.  While $u.used > 0$ and $v.used > 0$ and $u_0 \equiv v_0 \equiv 0 \mbox{ (mod }2\mbox{)}$ \\
-\hspace{3mm}6.1  $k \leftarrow k + 1$ \\
-\hspace{3mm}6.2  $u \leftarrow \lfloor u / 2 \rfloor$ \\
-\hspace{3mm}6.3  $v \leftarrow \lfloor v / 2 \rfloor$ \\
-7.  While $u.used > 0$ and $u_0 \equiv 0 \mbox{ (mod }2\mbox{)}$ \\
-\hspace{3mm}7.1  $u \leftarrow \lfloor u / 2 \rfloor$ \\
-8.  While $v.used > 0$ and $v_0 \equiv 0 \mbox{ (mod }2\mbox{)}$ \\
-\hspace{3mm}8.1  $v \leftarrow \lfloor v / 2 \rfloor$ \\
-9.  While $v.used > 0$ \\
-\hspace{3mm}9.1  If $\vert u \vert > \vert v \vert$ then \\
-\hspace{6mm}9.1.1  Swap $u$ and $v$. \\
-\hspace{3mm}9.2  $v \leftarrow \vert v \vert - \vert u \vert$ \\
-\hspace{3mm}9.3  While $v.used > 0$ and $v_0 \equiv 0 \mbox{ (mod }2\mbox{)}$ \\
-\hspace{6mm}9.3.1  $v \leftarrow \lfloor v / 2 \rfloor$ \\
-10.  $c \leftarrow u \cdot 2^k$ \\
-11.  Return(\textit{MP\_OKAY}). \\
-\hline
-\end{tabular}
-\end{center}
-\end{small}
-\caption{Algorithm mp\_gcd}
-\end{figure}
-\textbf{Algorithm mp\_gcd.}
-This algorithm will produce the greatest common divisor of two mp\_ints $a$ and $b$.  The algorithm was originally based on Algorithm B of
-Knuth \cite[pp. 338]{TAOCPV2} but has been modified to be simpler to explain.  In theory it achieves the same asymptotic working time as
-Algorithm B and in practice this appears to be true.  
-
-The first three steps handle the cases where either one of or both inputs are zero.  If either input is zero the greatest common divisor is the 
-largest input or zero if they are both zero.  If the inputs are not trivial than $u$ and $v$ are assigned the absolute values of 
-$a$ and $b$ respectively and the algorithm will proceed to reduce the pair.
-
-Step six will divide out any common factors of two and keep track of the count in the variable $k$.  After this step two is no longer a
-factor of the remaining greatest common divisor between $u$ and $v$ and can be safely evenly divided out of either whenever they are even.  Step 
-seven and eight ensure that the $u$ and $v$ respectively have no more factors of two.  At most only one of the while loops will iterate since 
-they cannot both be even.
-
-By step nine both of $u$ and $v$ are odd which is required for the inner logic.  First the pair are swapped such that $v$ is equal to
-or greater than $u$.  This ensures that the subtraction on step 9.2 will always produce a positive and even result.  Step 9.3 removes any
-factors of two from the difference $u$ to ensure that in the next iteration of the loop both are once again odd.
-
-After $v = 0$ occurs the variable $u$ has the greatest common divisor of the pair $\left < u, v \right >$ just after step six.  The result
-must be adjusted by multiplying by the common factors of two ($2^k$) removed earlier.  
-
-\vspace{+3mm}\begin{small}
-\hspace{-5.1mm}{\bf File}: bn\_mp\_gcd.c
-\vspace{-3mm}
-\begin{alltt}
-016   
-017   /* Greatest Common Divisor using the binary method */
-018   int mp_gcd (mp_int * a, mp_int * b, mp_int * c)
-019   \{
-020     mp_int  u, v;
-021     int     k, u_lsb, v_lsb, res;
-022   
-023     /* either zero than gcd is the largest */
-024     if (mp_iszero (a) == 1 && mp_iszero (b) == 0) \{
-025       return mp_abs (b, c);
-026     \}
-027     if (mp_iszero (a) == 0 && mp_iszero (b) == 1) \{
-028       return mp_abs (a, c);
-029     \}
-030   
-031     /* optimized.  At this point if a == 0 then
-032      * b must equal zero too
-033      */
-034     if (mp_iszero (a) == 1) \{
-035       mp_zero(c);
-036       return MP_OKAY;
-037     \}
-038   
-039     /* get copies of a and b we can modify */
-040     if ((res = mp_init_copy (&u, a)) != MP_OKAY) \{
-041       return res;
-042     \}
-043   
-044     if ((res = mp_init_copy (&v, b)) != MP_OKAY) \{
-045       goto LBL_U;
-046     \}
-047   
-048     /* must be positive for the remainder of the algorithm */
-049     u.sign = v.sign = MP_ZPOS;
-050   
-051     /* B1.  Find the common power of two for u and v */
-052     u_lsb = mp_cnt_lsb(&u);
-053     v_lsb = mp_cnt_lsb(&v);
-054     k     = MIN(u_lsb, v_lsb);
-055   
-056     if (k > 0) \{
-057        /* divide the power of two out */
-058        if ((res = mp_div_2d(&u, k, &u, NULL)) != MP_OKAY) \{
-059           goto LBL_V;
-060        \}
-061   
-062        if ((res = mp_div_2d(&v, k, &v, NULL)) != MP_OKAY) \{
-063           goto LBL_V;
-064        \}
-065     \}
-066   
-067     /* divide any remaining factors of two out */
-068     if (u_lsb != k) \{
-069        if ((res = mp_div_2d(&u, u_lsb - k, &u, NULL)) != MP_OKAY) \{
-070           goto LBL_V;
-071        \}
-072     \}
-073   
-074     if (v_lsb != k) \{
-075        if ((res = mp_div_2d(&v, v_lsb - k, &v, NULL)) != MP_OKAY) \{
-076           goto LBL_V;
-077        \}
-078     \}
-079   
-080     while (mp_iszero(&v) == 0) \{
-081        /* make sure v is the largest */
-082        if (mp_cmp_mag(&u, &v) == MP_GT) \{
-083           /* swap u and v to make sure v is >= u */
-084           mp_exch(&u, &v);
-085        \}
-086        
-087        /* subtract smallest from largest */
-088        if ((res = s_mp_sub(&v, &u, &v)) != MP_OKAY) \{
-089           goto LBL_V;
-090        \}
-091        
-092        /* Divide out all factors of two */
-093        if ((res = mp_div_2d(&v, mp_cnt_lsb(&v), &v, NULL)) != MP_OKAY) \{
-094           goto LBL_V;
-095        \} 
-096     \} 
-097   
-098     /* multiply by 2**k which we divided out at the beginning */
-099     if ((res = mp_mul_2d (&u, k, c)) != MP_OKAY) \{
-100        goto LBL_V;
-101     \}
-102     c->sign = MP_ZPOS;
-103     res = MP_OKAY;
-104   LBL_V:mp_clear (&u);
-105   LBL_U:mp_clear (&v);
-106     return res;
-107   \}
-108   #endif
-\end{alltt}
-\end{small}
-
-This function makes use of the macros mp\_iszero and mp\_iseven.  The former evaluates to $1$ if the input mp\_int is equivalent to the 
-integer zero otherwise it evaluates to $0$.  The latter evaluates to $1$ if the input mp\_int represents a non-zero even integer otherwise
-it evaluates to $0$.  Note that just because mp\_iseven may evaluate to $0$ does not mean the input is odd, it could also be zero.  The three 
-trivial cases of inputs are handled on lines 24 through 37.  After those lines the inputs are assumed to be non-zero.
-
-Lines 34 and 40 make local copies $u$ and $v$ of the inputs $a$ and $b$ respectively.  At this point the common factors of two 
-must be divided out of the two inputs.  The while loop on line 80 iterates so long as both are even.  The local integer $k$ is used to
-keep track of how many factors of $2$ are pulled out of both values.  It is assumed that the number of factors will not exceed the maximum 
-value of a C ``int'' data type\footnote{Strictly speaking no array in C may have more than entries than are accessible by an ``int'' so this is not 
-a limitation.}.  
-
-At this point there are no more common factors of two in the two values.  The while loops on lines 80 and 80 remove any independent
-factors of two such that both $u$ and $v$ are guaranteed to be an odd integer before hitting the main body of the algorithm.  The while loop
-on line 80 performs the reduction of the pair until $v$ is equal to zero.  The unsigned comparison and subtraction algorithms are used in
-place of the full signed routines since both values are guaranteed to be positive and the result of the subtraction is guaranteed to be non-negative.
-
-\section{Least Common Multiple}
-The least common multiple of a pair of integers is their product divided by their greatest common divisor.  For two integers $a$ and $b$ the
-least common multiple is normally denoted as $[ a, b ]$ and numerically equivalent to ${ab} \over {(a, b)}$.  For example, if $a = 2 \cdot 2 \cdot 3 = 12$
-and $b = 2 \cdot 3 \cdot 3 \cdot 7 = 126$ the least common multiple is ${126 \over {(12, 126)}} = {126 \over 6} = 21$.
-
-The least common multiple arises often in coding theory as well as number theory.  If two functions have periods of $a$ and $b$ respectively they will
-collide, that is be in synchronous states, after only $[ a, b ]$ iterations.  This is why, for example, random number generators based on 
-Linear Feedback Shift Registers (LFSR) tend to use registers with periods which are co-prime (\textit{e.g. the greatest common divisor is one.}).  
-Similarly in number theory if a composite $n$ has two prime factors $p$ and $q$ then maximal order of any unit of $\Z/n\Z$ will be $[ p - 1, q - 1] $.
-
-\begin{figure}[!here]
-\begin{small}
-\begin{center}
-\begin{tabular}{l}
-\hline Algorithm \textbf{mp\_lcm}. \\
-\textbf{Input}.   mp\_int $a$ and $b$ \\
-\textbf{Output}.  The least common multiple $c = [a, b]$.  \\
-\hline \\
-1.  $c \leftarrow (a, b)$ \\
-2.  $t \leftarrow a \cdot b$ \\
-3.  $c \leftarrow \lfloor t / c \rfloor$ \\
-4.  Return(\textit{MP\_OKAY}). \\
-\hline
-\end{tabular}
-\end{center}
-\end{small}
-\caption{Algorithm mp\_lcm}
-\end{figure}
-\textbf{Algorithm mp\_lcm.}
-This algorithm computes the least common multiple of two mp\_int inputs $a$ and $b$.  It computes the least common multiple directly by
-dividing the product of the two inputs by their greatest common divisor.
-
-\vspace{+3mm}\begin{small}
-\hspace{-5.1mm}{\bf File}: bn\_mp\_lcm.c
-\vspace{-3mm}
-\begin{alltt}
-016   
-017   /* computes least common multiple as |a*b|/(a, b) */
-018   int mp_lcm (mp_int * a, mp_int * b, mp_int * c)
-019   \{
-020     int     res;
-021     mp_int  t1, t2;
-022   
-023   
-024     if ((res = mp_init_multi (&t1, &t2, NULL)) != MP_OKAY) \{
-025       return res;
-026     \}
-027   
-028     /* t1 = get the GCD of the two inputs */
-029     if ((res = mp_gcd (a, b, &t1)) != MP_OKAY) \{
-030       goto LBL_T;
-031     \}
-032   
-033     /* divide the smallest by the GCD */
-034     if (mp_cmp_mag(a, b) == MP_LT) \{
-035        /* store quotient in t2 such that t2 * b is the LCM */
-036        if ((res = mp_div(a, &t1, &t2, NULL)) != MP_OKAY) \{
-037           goto LBL_T;
-038        \}
-039        res = mp_mul(b, &t2, c);
-040     \} else \{
-041        /* store quotient in t2 such that t2 * a is the LCM */
-042        if ((res = mp_div(b, &t1, &t2, NULL)) != MP_OKAY) \{
-043           goto LBL_T;
-044        \}
-045        res = mp_mul(a, &t2, c);
-046     \}
-047   
-048     /* fix the sign to positive */
-049     c->sign = MP_ZPOS;
-050   
-051   LBL_T:
-052     mp_clear_multi (&t1, &t2, NULL);
-053     return res;
-054   \}
-055   #endif
-\end{alltt}
-\end{small}
-
-\section{Jacobi Symbol Computation}
-To explain the Jacobi Symbol we shall first discuss the Legendre function\footnote{Arrg.  What is the name of this?} off which the Jacobi symbol is 
-defined.  The Legendre function computes whether or not an integer $a$ is a quadratic residue modulo an odd prime $p$.  Numerically it is
-equivalent to equation \ref{eqn:legendre}.
-
-\textit{-- Tom, don't be an ass, cite your source here...!}
-
-\begin{equation}
-a^{(p-1)/2} \equiv \begin{array}{rl}
-                              -1 &  \mbox{if }a\mbox{ is a quadratic non-residue.} \\
-                              0  &  \mbox{if }a\mbox{ divides }p\mbox{.} \\
-                              1  &  \mbox{if }a\mbox{ is a quadratic residue}. 
-                              \end{array} \mbox{ (mod }p\mbox{)}
-\label{eqn:legendre}                              
-\end{equation}
-
-\textbf{Proof.} \textit{Equation \ref{eqn:legendre} correctly identifies the residue status of an integer $a$ modulo a prime $p$.}
-An integer $a$ is a quadratic residue if the following equation has a solution.
-
-\begin{equation}
-x^2 \equiv a \mbox{ (mod }p\mbox{)}
-\label{eqn:root}
-\end{equation}
-
-Consider the following equation.
-
-\begin{equation}
-0 \equiv x^{p-1} - 1 \equiv \left \lbrace \left (x^2 \right )^{(p-1)/2} - a^{(p-1)/2} \right \rbrace + \left ( a^{(p-1)/2} - 1 \right ) \mbox{ (mod }p\mbox{)}
-\label{eqn:rooti}
-\end{equation}
-
-Whether equation \ref{eqn:root} has a solution or not equation \ref{eqn:rooti} is always true.  If $a^{(p-1)/2} - 1 \equiv 0 \mbox{ (mod }p\mbox{)}$
-then the quantity in the braces must be zero.  By reduction,
-
-\begin{eqnarray}
-\left (x^2 \right )^{(p-1)/2} - a^{(p-1)/2} \equiv 0  \nonumber \\
-\left (x^2 \right )^{(p-1)/2} \equiv a^{(p-1)/2} \nonumber \\
-x^2 \equiv a \mbox{ (mod }p\mbox{)} 
-\end{eqnarray}
-
-As a result there must be a solution to the quadratic equation and in turn $a$ must be a quadratic residue.  If $a$ does not divide $p$ and $a$
-is not a quadratic residue then the only other value $a^{(p-1)/2}$ may be congruent to is $-1$ since
-\begin{equation}
-0 \equiv a^{p - 1} - 1 \equiv (a^{(p-1)/2} + 1)(a^{(p-1)/2} - 1) \mbox{ (mod }p\mbox{)}
-\end{equation}
-One of the terms on the right hand side must be zero.  \textbf{QED}
-
-\subsection{Jacobi Symbol}
-The Jacobi symbol is a generalization of the Legendre function for any odd non prime moduli $p$ greater than 2.  If $p = \prod_{i=0}^n p_i$ then
-the Jacobi symbol $\left ( { a \over p } \right )$ is equal to the following equation.
-
-\begin{equation}
-\left ( { a \over p } \right ) = \left ( { a \over p_0} \right ) \left ( { a \over p_1} \right ) \ldots \left ( { a \over p_n} \right )
-\end{equation}
-
-By inspection if $p$ is prime the Jacobi symbol is equivalent to the Legendre function.  The following facts\footnote{See HAC \cite[pp. 72-74]{HAC} for
-further details.} will be used to derive an efficient Jacobi symbol algorithm.  Where $p$ is an odd integer greater than two and $a, b \in \Z$ the
-following are true.  
-
-\begin{enumerate}
-\item $\left ( { a \over p} \right )$ equals $-1$, $0$ or $1$. 
-\item $\left ( { ab \over p} \right ) = \left ( { a \over p} \right )\left ( { b \over p} \right )$.
-\item If $a \equiv b$ then $\left ( { a \over p} \right ) = \left ( { b \over p} \right )$.
-\item $\left ( { 2 \over p} \right )$ equals $1$ if $p \equiv 1$ or $7 \mbox{ (mod }8\mbox{)}$.  Otherwise, it equals $-1$.
-\item $\left ( { a \over p} \right ) \equiv \left ( { p \over a} \right ) \cdot (-1)^{(p-1)(a-1)/4}$.  More specifically 
-$\left ( { a \over p} \right ) = \left ( { p \over a} \right )$ if $p \equiv a \equiv 1 \mbox{ (mod }4\mbox{)}$.  
-\end{enumerate}
-
-Using these facts if $a = 2^k \cdot a'$ then
-
-\begin{eqnarray}
-\left ( { a \over p } \right ) = \left ( {{2^k} \over p } \right ) \left ( {a' \over p} \right ) \nonumber \\
-                               = \left ( {2 \over p } \right )^k \left ( {a' \over p} \right ) 
-\label{eqn:jacobi}
-\end{eqnarray}
-
-By fact five, 
-
-\begin{equation}
-\left ( { a \over p } \right ) = \left ( { p \over a } \right ) \cdot (-1)^{(p-1)(a-1)/4} 
-\end{equation}
-
-Subsequently by fact three since $p \equiv (p \mbox{ mod }a) \mbox{ (mod }a\mbox{)}$ then 
-
-\begin{equation}
-\left ( { a \over p } \right ) = \left ( { {p \mbox{ mod } a} \over a } \right ) \cdot (-1)^{(p-1)(a-1)/4} 
-\end{equation}
-
-By putting both observations into equation \ref{eqn:jacobi} the following simplified equation is formed.
-
-\begin{equation}
-\left ( { a \over p } \right ) = \left ( {2 \over p } \right )^k \left ( {{p\mbox{ mod }a'} \over a'} \right )  \cdot (-1)^{(p-1)(a'-1)/4} 
-\end{equation}
-
-The value of $\left ( {{p \mbox{ mod }a'} \over a'} \right )$ can be found by using the same equation recursively.  The value of 
-$\left ( {2 \over p } \right )^k$ equals $1$ if $k$ is even otherwise it equals $\left ( {2 \over p } \right )$.  Using this approach the 
-factors of $p$ do not have to be known.  Furthermore, if $(a, p) = 1$ then the algorithm will terminate when the recursion requests the 
-Jacobi symbol computation of $\left ( {1 \over a'} \right )$ which is simply $1$.  
-
-\newpage\begin{figure}[!here]
-\begin{small}
-\begin{center}
-\begin{tabular}{l}
-\hline Algorithm \textbf{mp\_jacobi}. \\
-\textbf{Input}.   mp\_int $a$ and $p$, $a \ge 0$, $p \ge 3$, $p \equiv 1 \mbox{ (mod }2\mbox{)}$ \\
-\textbf{Output}.  The Jacobi symbol $c = \left ( {a \over p } \right )$. \\
-\hline \\
-1.  If $a = 0$ then \\
-\hspace{3mm}1.1  $c \leftarrow 0$ \\
-\hspace{3mm}1.2  Return(\textit{MP\_OKAY}). \\
-2.  If $a = 1$ then \\
-\hspace{3mm}2.1  $c \leftarrow 1$ \\
-\hspace{3mm}2.2  Return(\textit{MP\_OKAY}). \\
-3.  $a' \leftarrow a$ \\
-4.  $k \leftarrow 0$ \\
-5.  While $a'.used > 0$ and $a'_0 \equiv 0 \mbox{ (mod }2\mbox{)}$ \\
-\hspace{3mm}5.1  $k \leftarrow k + 1$ \\
-\hspace{3mm}5.2  $a' \leftarrow \lfloor a' / 2 \rfloor$ \\
-6.  If $k \equiv 0 \mbox{ (mod }2\mbox{)}$ then \\
-\hspace{3mm}6.1  $s \leftarrow 1$ \\
-7.  else \\
-\hspace{3mm}7.1  $r \leftarrow p_0 \mbox{ (mod }8\mbox{)}$ \\
-\hspace{3mm}7.2  If $r = 1$ or $r = 7$ then \\
-\hspace{6mm}7.2.1  $s \leftarrow 1$ \\
-\hspace{3mm}7.3  else \\
-\hspace{6mm}7.3.1  $s \leftarrow -1$ \\
-8.  If $p_0 \equiv a'_0 \equiv 3 \mbox{ (mod }4\mbox{)}$ then \\
-\hspace{3mm}8.1  $s \leftarrow -s$ \\
-9.  If $a' \ne 1$ then \\
-\hspace{3mm}9.1  $p' \leftarrow p \mbox{ (mod }a'\mbox{)}$ \\
-\hspace{3mm}9.2  $s \leftarrow s \cdot \mbox{mp\_jacobi}(p', a')$ \\
-10.  $c \leftarrow s$ \\
-11.  Return(\textit{MP\_OKAY}). \\
-\hline
-\end{tabular}
-\end{center}
-\end{small}
-\caption{Algorithm mp\_jacobi}
-\end{figure}
-\textbf{Algorithm mp\_jacobi.}
-This algorithm computes the Jacobi symbol for an arbitrary positive integer $a$ with respect to an odd integer $p$ greater than three.  The algorithm
-is based on algorithm 2.149 of HAC \cite[pp. 73]{HAC}.  
-
-Step numbers one and two handle the trivial cases of $a = 0$ and $a = 1$ respectively.  Step five determines the number of two factors in the
-input $a$.  If $k$ is even than the term $\left ( { 2 \over p } \right )^k$ must always evaluate to one.  If $k$ is odd than the term evaluates to one 
-if $p_0$ is congruent to one or seven modulo eight, otherwise it evaluates to $-1$. After the the $\left ( { 2 \over p } \right )^k$ term is handled 
-the $(-1)^{(p-1)(a'-1)/4}$ is computed and multiplied against the current product $s$.  The latter term evaluates to one if both $p$ and $a'$ 
-are congruent to one modulo four, otherwise it evaluates to negative one.
-
-By step nine if $a'$ does not equal one a recursion is required.  Step 9.1 computes $p' \equiv p \mbox{ (mod }a'\mbox{)}$ and will recurse to compute
-$\left ( {p' \over a'} \right )$ which is multiplied against the current Jacobi product.
-
-\vspace{+3mm}\begin{small}
-\hspace{-5.1mm}{\bf File}: bn\_mp\_jacobi.c
-\vspace{-3mm}
-\begin{alltt}
-016   
-017   /* computes the jacobi c = (a | n) (or Legendre if n is prime)
-018    * HAC pp. 73 Algorithm 2.149
-019    */
-020   int mp_jacobi (mp_int * a, mp_int * p, int *c)
-021   \{
-022     mp_int  a1, p1;
-023     int     k, s, r, res;
-024     mp_digit residue;
-025   
-026     /* if p <= 0 return MP_VAL */
-027     if (mp_cmp_d(p, 0) != MP_GT) \{
-028        return MP_VAL;
-029     \}
-030   
-031     /* step 1.  if a == 0, return 0 */
-032     if (mp_iszero (a) == 1) \{
-033       *c = 0;
-034       return MP_OKAY;
-035     \}
-036   
-037     /* step 2.  if a == 1, return 1 */
-038     if (mp_cmp_d (a, 1) == MP_EQ) \{
-039       *c = 1;
-040       return MP_OKAY;
-041     \}
-042   
-043     /* default */
-044     s = 0;
-045   
-046     /* step 3.  write a = a1 * 2**k  */
-047     if ((res = mp_init_copy (&a1, a)) != MP_OKAY) \{
-048       return res;
-049     \}
-050   
-051     if ((res = mp_init (&p1)) != MP_OKAY) \{
-052       goto LBL_A1;
-053     \}
-054   
-055     /* divide out larger power of two */
-056     k = mp_cnt_lsb(&a1);
-057     if ((res = mp_div_2d(&a1, k, &a1, NULL)) != MP_OKAY) \{
-058        goto LBL_P1;
-059     \}
-060   
-061     /* step 4.  if e is even set s=1 */
-062     if ((k & 1) == 0) \{
-063       s = 1;
-064     \} else \{
-065       /* else set s=1 if p = 1/7 (mod 8) or s=-1 if p = 3/5 (mod 8) */
-066       residue = p->dp[0] & 7;
-067   
-068       if (residue == 1 || residue == 7) \{
-069         s = 1;
-070       \} else if (residue == 3 || residue == 5) \{
-071         s = -1;
-072       \}
-073     \}
-074   
-075     /* step 5.  if p == 3 (mod 4) *and* a1 == 3 (mod 4) then s = -s */
-076     if ( ((p->dp[0] & 3) == 3) && ((a1.dp[0] & 3) == 3)) \{
-077       s = -s;
-078     \}
-079   
-080     /* if a1 == 1 we're done */
-081     if (mp_cmp_d (&a1, 1) == MP_EQ) \{
-082       *c = s;
-083     \} else \{
-084       /* n1 = n mod a1 */
-085       if ((res = mp_mod (p, &a1, &p1)) != MP_OKAY) \{
-086         goto LBL_P1;
-087       \}
-088       if ((res = mp_jacobi (&p1, &a1, &r)) != MP_OKAY) \{
-089         goto LBL_P1;
-090       \}
-091       *c = s * r;
-092     \}
-093   
-094     /* done */
-095     res = MP_OKAY;
-096   LBL_P1:mp_clear (&p1);
-097   LBL_A1:mp_clear (&a1);
-098     return res;
-099   \}
-100   #endif
-\end{alltt}
-\end{small}
-
-As a matter of practicality the variable $a'$ as per the pseudo-code is reprensented by the variable $a1$ since the $'$ symbol is not valid for a C 
-variable name character. 
-
-The two simple cases of $a = 0$ and $a = 1$ are handled at the very beginning to simplify the algorithm.  If the input is non-trivial the algorithm
-has to proceed compute the Jacobi.  The variable $s$ is used to hold the current Jacobi product.  Note that $s$ is merely a C ``int'' data type since
-the values it may obtain are merely $-1$, $0$ and $1$.  
-
-After a local copy of $a$ is made all of the factors of two are divided out and the total stored in $k$.  Technically only the least significant
-bit of $k$ is required, however, it makes the algorithm simpler to follow to perform an addition. In practice an exclusive-or and addition have the same 
-processor requirements and neither is faster than the other.
-
-Line 61 through 70 determines the value of $\left ( { 2 \over p } \right )^k$.  If the least significant bit of $k$ is zero than
-$k$ is even and the value is one.  Otherwise, the value of $s$ depends on which residue class $p$ belongs to modulo eight.  The value of
-$(-1)^{(p-1)(a'-1)/4}$ is compute and multiplied against $s$ on lines 75 through 73.  
-
-Finally, if $a1$ does not equal one the algorithm must recurse and compute $\left ( {p' \over a'} \right )$.  
-
-\textit{-- Comment about default $s$ and such...}
-
-\section{Modular Inverse}
-\label{sec:modinv}
-The modular inverse of a number actually refers to the modular multiplicative inverse.  Essentially for any integer $a$ such that $(a, p) = 1$ there
-exist another integer $b$ such that $ab \equiv 1 \mbox{ (mod }p\mbox{)}$.  The integer $b$ is called the multiplicative inverse of $a$ which is
-denoted as $b = a^{-1}$.  Technically speaking modular inversion is a well defined operation for any finite ring or field not just for rings and 
-fields of integers.  However, the former will be the matter of discussion.
-
-The simplest approach is to compute the algebraic inverse of the input.  That is to compute $b \equiv a^{\Phi(p) - 1}$.  If $\Phi(p)$ is the 
-order of the multiplicative subgroup modulo $p$ then $b$ must be the multiplicative inverse of $a$.  The proof of which is trivial.
-
-\begin{equation}
-ab \equiv a \left (a^{\Phi(p) - 1} \right ) \equiv a^{\Phi(p)} \equiv a^0 \equiv 1 \mbox{ (mod }p\mbox{)}
-\end{equation}
-
-However, as simple as this approach may be it has two serious flaws.  It requires that the value of $\Phi(p)$ be known which if $p$ is composite 
-requires all of the prime factors.  This approach also is very slow as the size of $p$ grows.  
-
-A simpler approach is based on the observation that solving for the multiplicative inverse is equivalent to solving the linear 
-Diophantine\footnote{See LeVeque \cite[pp. 40-43]{LeVeque} for more information.} equation.
-
-\begin{equation}
-ab + pq = 1
-\end{equation}
-
-Where $a$, $b$, $p$ and $q$ are all integers.  If such a pair of integers $ \left < b, q \right >$ exist than $b$ is the multiplicative inverse of 
-$a$ modulo $p$.  The extended Euclidean algorithm (Knuth \cite[pp. 342]{TAOCPV2}) can be used to solve such equations provided $(a, p) = 1$.  
-However, instead of using that algorithm directly a variant known as the binary Extended Euclidean algorithm will be used in its place.  The
-binary approach is very similar to the binary greatest common divisor algorithm except it will produce a full solution to the Diophantine 
-equation.  
-
-\subsection{General Case}
-\newpage\begin{figure}[!here]
-\begin{small}
-\begin{center}
-\begin{tabular}{l}
-\hline Algorithm \textbf{mp\_invmod}. \\
-\textbf{Input}.   mp\_int $a$ and $b$, $(a, b) = 1$, $p \ge 2$, $0 < a < p$.  \\
-\textbf{Output}.  The modular inverse $c \equiv a^{-1} \mbox{ (mod }b\mbox{)}$. \\
-\hline \\
-1.  If $b \le 0$ then return(\textit{MP\_VAL}). \\
-2.  If $b_0 \equiv 1 \mbox{ (mod }2\mbox{)}$ then use algorithm fast\_mp\_invmod. \\
-3.  $x \leftarrow \vert a \vert, y \leftarrow b$ \\
-4.  If $x_0 \equiv y_0  \equiv 0 \mbox{ (mod }2\mbox{)}$ then return(\textit{MP\_VAL}). \\
-5.  $B \leftarrow 0, C \leftarrow 0, A \leftarrow 1, D \leftarrow 1$ \\
-6.  While $u.used > 0$ and $u_0 \equiv 0 \mbox{ (mod }2\mbox{)}$ \\
-\hspace{3mm}6.1  $u \leftarrow \lfloor u / 2 \rfloor$ \\
-\hspace{3mm}6.2  If ($A.used > 0$ and $A_0 \equiv 1 \mbox{ (mod }2\mbox{)}$) or ($B.used > 0$ and $B_0 \equiv 1 \mbox{ (mod }2\mbox{)}$) then \\
-\hspace{6mm}6.2.1  $A \leftarrow A + y$ \\
-\hspace{6mm}6.2.2  $B \leftarrow B - x$ \\
-\hspace{3mm}6.3  $A \leftarrow \lfloor A / 2 \rfloor$ \\
-\hspace{3mm}6.4  $B \leftarrow \lfloor B / 2 \rfloor$ \\
-7.  While $v.used > 0$ and $v_0 \equiv 0 \mbox{ (mod }2\mbox{)}$ \\
-\hspace{3mm}7.1  $v \leftarrow \lfloor v / 2 \rfloor$ \\
-\hspace{3mm}7.2  If ($C.used > 0$ and $C_0 \equiv 1 \mbox{ (mod }2\mbox{)}$) or ($D.used > 0$ and $D_0 \equiv 1 \mbox{ (mod }2\mbox{)}$) then \\
-\hspace{6mm}7.2.1  $C \leftarrow C + y$ \\
-\hspace{6mm}7.2.2  $D \leftarrow D - x$ \\
-\hspace{3mm}7.3  $C \leftarrow \lfloor C / 2 \rfloor$ \\
-\hspace{3mm}7.4  $D \leftarrow \lfloor D / 2 \rfloor$ \\
-8.  If $u \ge v$ then \\
-\hspace{3mm}8.1  $u \leftarrow u - v$ \\
-\hspace{3mm}8.2  $A \leftarrow A - C$ \\
-\hspace{3mm}8.3  $B \leftarrow B - D$ \\
-9.  else \\
-\hspace{3mm}9.1  $v \leftarrow v - u$ \\
-\hspace{3mm}9.2  $C \leftarrow C - A$ \\
-\hspace{3mm}9.3  $D \leftarrow D - B$ \\
-10.  If $u \ne 0$ goto step 6. \\
-11.  If $v \ne 1$ return(\textit{MP\_VAL}). \\
-12.  While $C \le 0$ do \\
-\hspace{3mm}12.1  $C \leftarrow C + b$ \\
-13.  While $C \ge b$ do \\
-\hspace{3mm}13.1  $C \leftarrow C - b$ \\
-14.  $c \leftarrow C$ \\
-15.  Return(\textit{MP\_OKAY}). \\
-\hline
-\end{tabular}
-\end{center}
-\end{small}
-\end{figure}
-\textbf{Algorithm mp\_invmod.}
-This algorithm computes the modular multiplicative inverse of an integer $a$ modulo an integer $b$.  This algorithm is a variation of the 
-extended binary Euclidean algorithm from HAC \cite[pp. 608]{HAC}.  It has been modified to only compute the modular inverse and not a complete
-Diophantine solution.  
-
-If $b \le 0$ than the modulus is invalid and MP\_VAL is returned.  Similarly if both $a$ and $b$ are even then there cannot be a multiplicative
-inverse for $a$ and the error is reported.  
-
-The astute reader will observe that steps seven through nine are very similar to the binary greatest common divisor algorithm mp\_gcd.  In this case
-the other variables to the Diophantine equation are solved.  The algorithm terminates when $u = 0$ in which case the solution is
-
-\begin{equation}
-Ca + Db = v
-\end{equation}
-
-If $v$, the greatest common divisor of $a$ and $b$ is not equal to one then the algorithm will report an error as no inverse exists.  Otherwise, $C$
-is the modular inverse of $a$.  The actual value of $C$ is congruent to, but not necessarily equal to, the ideal modular inverse which should lie 
-within $1 \le a^{-1} < b$.  Step numbers twelve and thirteen adjust the inverse until it is in range.  If the original input $a$ is within $0 < a < p$ 
-then only a couple of additions or subtractions will be required to adjust the inverse.
-
-\vspace{+3mm}\begin{small}
-\hspace{-5.1mm}{\bf File}: bn\_mp\_invmod.c
-\vspace{-3mm}
-\begin{alltt}
-016   
-017   /* hac 14.61, pp608 */
-018   int mp_invmod (mp_int * a, mp_int * b, mp_int * c)
-019   \{
-020     /* b cannot be negative */
-021     if (b->sign == MP_NEG || mp_iszero(b) == 1) \{
-022       return MP_VAL;
-023     \}
-024   
-025   #ifdef BN_FAST_MP_INVMOD_C
-026     /* if the modulus is odd we can use a faster routine instead */
-027     if (mp_isodd (b) == 1) \{
-028       return fast_mp_invmod (a, b, c);
-029     \}
-030   #endif
-031   
-032   #ifdef BN_MP_INVMOD_SLOW_C
-033     return mp_invmod_slow(a, b, c);
-034   #endif
-035   
-036     return MP_VAL;
-037   \}
-038   #endif
-\end{alltt}
-\end{small}
-
-\subsubsection{Odd Moduli}
-
-When the modulus $b$ is odd the variables $A$ and $C$ are fixed and are not required to compute the inverse.  In particular by attempting to solve
-the Diophantine $Cb + Da = 1$ only $B$ and $D$ are required to find the inverse of $a$.  
-
-The algorithm fast\_mp\_invmod is a direct adaptation of algorithm mp\_invmod with all all steps involving either $A$ or $C$ removed.  This 
-optimization will halve the time required to compute the modular inverse.
-
-\section{Primality Tests}
-
-A non-zero integer $a$ is said to be prime if it is not divisible by any other integer excluding one and itself.  For example, $a = 7$ is prime 
-since the integers $2 \ldots 6$ do not evenly divide $a$.  By contrast, $a = 6$ is not prime since $a = 6 = 2 \cdot 3$. 
-
-Prime numbers arise in cryptography considerably as they allow finite fields to be formed.  The ability to determine whether an integer is prime or
-not quickly has been a viable subject in cryptography and number theory for considerable time.  The algorithms that will be presented are all
-probablistic algorithms in that when they report an integer is composite it must be composite.  However, when the algorithms report an integer is
-prime the algorithm may be incorrect.  
-
-As will be discussed it is possible to limit the probability of error so well that for practical purposes the probablity of error might as 
-well be zero.  For the purposes of these discussions let $n$ represent the candidate integer of which the primality is in question.
-
-\subsection{Trial Division}
-
-Trial division means to attempt to evenly divide a candidate integer by small prime integers.  If the candidate can be evenly divided it obviously
-cannot be prime.  By dividing by all primes $1 < p \le \sqrt{n}$ this test can actually prove whether an integer is prime.  However, such a test
-would require a prohibitive amount of time as $n$ grows.
-
-Instead of dividing by every prime, a smaller, more mangeable set of primes may be used instead.  By performing trial division with only a subset
-of the primes less than $\sqrt{n} + 1$ the algorithm cannot prove if a candidate is prime.  However, often it can prove a candidate is not prime.
-
-The benefit of this test is that trial division by small values is fairly efficient.  Specially compared to the other algorithms that will be
-discussed shortly.  The probability that this approach correctly identifies a composite candidate when tested with all primes upto $q$ is given by
-$1 - {1.12 \over ln(q)}$.  The graph (\ref{pic:primality}, will be added later) demonstrates the probability of success for the range 
-$3 \le q \le 100$.  
-
-At approximately $q = 30$ the gain of performing further tests diminishes fairly quickly.  At $q = 90$ further testing is generally not going to 
-be of any practical use.  In the case of LibTomMath the default limit $q = 256$ was chosen since it is not too high and will eliminate 
-approximately $80\%$ of all candidate integers.  The constant \textbf{PRIME\_SIZE} is equal to the number of primes in the test base.  The 
-array \_\_prime\_tab is an array of the first \textbf{PRIME\_SIZE} prime numbers.  
-
-\begin{figure}[!here]
-\begin{small}
-\begin{center}
-\begin{tabular}{l}
-\hline Algorithm \textbf{mp\_prime\_is\_divisible}. \\
-\textbf{Input}.   mp\_int $a$ \\
-\textbf{Output}.  $c = 1$ if $n$ is divisible by a small prime, otherwise $c = 0$.  \\
-\hline \\
-1.  for $ix$ from $0$ to $PRIME\_SIZE$ do \\
-\hspace{3mm}1.1  $d \leftarrow n \mbox{ (mod }\_\_prime\_tab_{ix}\mbox{)}$ \\
-\hspace{3mm}1.2  If $d = 0$ then \\
-\hspace{6mm}1.2.1  $c \leftarrow 1$ \\
-\hspace{6mm}1.2.2  Return(\textit{MP\_OKAY}). \\
-2.  $c \leftarrow 0$ \\
-3.  Return(\textit{MP\_OKAY}). \\
-\hline
-\end{tabular}
-\end{center}
-\end{small}
-\caption{Algorithm mp\_prime\_is\_divisible}
-\end{figure}
-\textbf{Algorithm mp\_prime\_is\_divisible.}
-This algorithm attempts to determine if a candidate integer $n$ is composite by performing trial divisions.  
-
-\vspace{+3mm}\begin{small}
-\hspace{-5.1mm}{\bf File}: bn\_mp\_prime\_is\_divisible.c
-\vspace{-3mm}
-\begin{alltt}
-016   
-017   /* determines if an integers is divisible by one 
-018    * of the first PRIME_SIZE primes or not
-019    *
-020    * sets result to 0 if not, 1 if yes
-021    */
-022   int mp_prime_is_divisible (mp_int * a, int *result)
-023   \{
-024     int     err, ix;
-025     mp_digit res;
-026   
-027     /* default to not */
-028     *result = MP_NO;
-029   
-030     for (ix = 0; ix < PRIME_SIZE; ix++) \{
-031       /* what is a mod LBL_prime_tab[ix] */
-032       if ((err = mp_mod_d (a, ltm_prime_tab[ix], &res)) != MP_OKAY) \{
-033         return err;
-034       \}
-035   
-036       /* is the residue zero? */
-037       if (res == 0) \{
-038         *result = MP_YES;
-039         return MP_OKAY;
-040       \}
-041     \}
-042   
-043     return MP_OKAY;
-044   \}
-045   #endif
-\end{alltt}
-\end{small}
-
-The algorithm defaults to a return of $0$ in case an error occurs.  The values in the prime table are all specified to be in the range of a 
-mp\_digit.  The table \_\_prime\_tab is defined in the following file.
-
-\vspace{+3mm}\begin{small}
-\hspace{-5.1mm}{\bf File}: bn\_prime\_tab.c
-\vspace{-3mm}
-\begin{alltt}
-016   const mp_digit ltm_prime_tab[] = \{
-017     0x0002, 0x0003, 0x0005, 0x0007, 0x000B, 0x000D, 0x0011, 0x0013,
-018     0x0017, 0x001D, 0x001F, 0x0025, 0x0029, 0x002B, 0x002F, 0x0035,
-019     0x003B, 0x003D, 0x0043, 0x0047, 0x0049, 0x004F, 0x0053, 0x0059,
-020     0x0061, 0x0065, 0x0067, 0x006B, 0x006D, 0x0071, 0x007F,
-021   #ifndef MP_8BIT
-022     0x0083,
-023     0x0089, 0x008B, 0x0095, 0x0097, 0x009D, 0x00A3, 0x00A7, 0x00AD,
-024     0x00B3, 0x00B5, 0x00BF, 0x00C1, 0x00C5, 0x00C7, 0x00D3, 0x00DF,
-025     0x00E3, 0x00E5, 0x00E9, 0x00EF, 0x00F1, 0x00FB, 0x0101, 0x0107,
-026     0x010D, 0x010F, 0x0115, 0x0119, 0x011B, 0x0125, 0x0133, 0x0137,
-027   
-028     0x0139, 0x013D, 0x014B, 0x0151, 0x015B, 0x015D, 0x0161, 0x0167,
-029     0x016F, 0x0175, 0x017B, 0x017F, 0x0185, 0x018D, 0x0191, 0x0199,
-030     0x01A3, 0x01A5, 0x01AF, 0x01B1, 0x01B7, 0x01BB, 0x01C1, 0x01C9,
-031     0x01CD, 0x01CF, 0x01D3, 0x01DF, 0x01E7, 0x01EB, 0x01F3, 0x01F7,
-032     0x01FD, 0x0209, 0x020B, 0x021D, 0x0223, 0x022D, 0x0233, 0x0239,
-033     0x023B, 0x0241, 0x024B, 0x0251, 0x0257, 0x0259, 0x025F, 0x0265,
-034     0x0269, 0x026B, 0x0277, 0x0281, 0x0283, 0x0287, 0x028D, 0x0293,
-035     0x0295, 0x02A1, 0x02A5, 0x02AB, 0x02B3, 0x02BD, 0x02C5, 0x02CF,
-036   
-037     0x02D7, 0x02DD, 0x02E3, 0x02E7, 0x02EF, 0x02F5, 0x02F9, 0x0301,
-038     0x0305, 0x0313, 0x031D, 0x0329, 0x032B, 0x0335, 0x0337, 0x033B,
-039     0x033D, 0x0347, 0x0355, 0x0359, 0x035B, 0x035F, 0x036D, 0x0371,
-040     0x0373, 0x0377, 0x038B, 0x038F, 0x0397, 0x03A1, 0x03A9, 0x03AD,
-041     0x03B3, 0x03B9, 0x03C7, 0x03CB, 0x03D1, 0x03D7, 0x03DF, 0x03E5,
-042     0x03F1, 0x03F5, 0x03FB, 0x03FD, 0x0407, 0x0409, 0x040F, 0x0419,
-043     0x041B, 0x0425, 0x0427, 0x042D, 0x043F, 0x0443, 0x0445, 0x0449,
-044     0x044F, 0x0455, 0x045D, 0x0463, 0x0469, 0x047F, 0x0481, 0x048B,
-045   
-046     0x0493, 0x049D, 0x04A3, 0x04A9, 0x04B1, 0x04BD, 0x04C1, 0x04C7,
-047     0x04CD, 0x04CF, 0x04D5, 0x04E1, 0x04EB, 0x04FD, 0x04FF, 0x0503,
-048     0x0509, 0x050B, 0x0511, 0x0515, 0x0517, 0x051B, 0x0527, 0x0529,
-049     0x052F, 0x0551, 0x0557, 0x055D, 0x0565, 0x0577, 0x0581, 0x058F,
-050     0x0593, 0x0595, 0x0599, 0x059F, 0x05A7, 0x05AB, 0x05AD, 0x05B3,
-051     0x05BF, 0x05C9, 0x05CB, 0x05CF, 0x05D1, 0x05D5, 0x05DB, 0x05E7,
-052     0x05F3, 0x05FB, 0x0607, 0x060D, 0x0611, 0x0617, 0x061F, 0x0623,
-053     0x062B, 0x062F, 0x063D, 0x0641, 0x0647, 0x0649, 0x064D, 0x0653
-054   #endif
-055   \};
-056   #endif
-\end{alltt}
-\end{small}
-
-Note that there are two possible tables.  When an mp\_digit is 7-bits long only the primes upto $127$ may be included, otherwise the primes
-upto $1619$ are used.  Note that the value of \textbf{PRIME\_SIZE} is a constant dependent on the size of a mp\_digit. 
-
-\subsection{The Fermat Test}
-The Fermat test is probably one the oldest tests to have a non-trivial probability of success.  It is based on the fact that if $n$ is in 
-fact prime then $a^{n} \equiv a \mbox{ (mod }n\mbox{)}$ for all $0 < a < n$.  The reason being that if $n$ is prime than the order of
-the multiplicative sub group is $n - 1$.  Any base $a$ must have an order which divides $n - 1$ and as such $a^n$ is equivalent to 
-$a^1 = a$.  
-
-If $n$ is composite then any given base $a$ does not have to have a period which divides $n - 1$.  In which case 
-it is possible that $a^n \nequiv a \mbox{ (mod }n\mbox{)}$.  However, this test is not absolute as it is possible that the order
-of a base will divide $n - 1$ which would then be reported as prime.  Such a base yields what is known as a Fermat pseudo-prime.  Several 
-integers known as Carmichael numbers will be a pseudo-prime to all valid bases.  Fortunately such numbers are extremely rare as $n$ grows
-in size.
-
-\begin{figure}[!here]
-\begin{small}
-\begin{center}
-\begin{tabular}{l}
-\hline Algorithm \textbf{mp\_prime\_fermat}. \\
-\textbf{Input}.   mp\_int $a$ and $b$, $a \ge 2$, $0 < b < a$.  \\
-\textbf{Output}.  $c = 1$ if $b^a \equiv b \mbox{ (mod }a\mbox{)}$, otherwise $c = 0$.  \\
-\hline \\
-1.  $t \leftarrow b^a \mbox{ (mod }a\mbox{)}$ \\
-2.  If $t = b$ then \\
-\hspace{3mm}2.1  $c = 1$ \\
-3.  else \\
-\hspace{3mm}3.1  $c = 0$ \\
-4.  Return(\textit{MP\_OKAY}). \\
-\hline
-\end{tabular}
-\end{center}
-\end{small}
-\caption{Algorithm mp\_prime\_fermat}
-\end{figure}
-\textbf{Algorithm mp\_prime\_fermat.}
-This algorithm determines whether an mp\_int $a$ is a Fermat prime to the base $b$ or not.  It uses a single modular exponentiation to
-determine the result.  
-
-\vspace{+3mm}\begin{small}
-\hspace{-5.1mm}{\bf File}: bn\_mp\_prime\_fermat.c
-\vspace{-3mm}
-\begin{alltt}
-016   
-017   /* performs one Fermat test.
-018    * 
-019    * If "a" were prime then b**a == b (mod a) since the order of
-020    * the multiplicative sub-group would be phi(a) = a-1.  That means
-021    * it would be the same as b**(a mod (a-1)) == b**1 == b (mod a).
-022    *
-023    * Sets result to 1 if the congruence holds, or zero otherwise.
-024    */
-025   int mp_prime_fermat (mp_int * a, mp_int * b, int *result)
-026   \{
-027     mp_int  t;
-028     int     err;
-029   
-030     /* default to composite  */
-031     *result = MP_NO;
-032   
-033     /* ensure b > 1 */
-034     if (mp_cmp_d(b, 1) != MP_GT) \{
-035        return MP_VAL;
-036     \}
-037   
-038     /* init t */
-039     if ((err = mp_init (&t)) != MP_OKAY) \{
-040       return err;
-041     \}
-042   
-043     /* compute t = b**a mod a */
-044     if ((err = mp_exptmod (b, a, a, &t)) != MP_OKAY) \{
-045       goto LBL_T;
-046     \}
-047   
-048     /* is it equal to b? */
-049     if (mp_cmp (&t, b) == MP_EQ) \{
-050       *result = MP_YES;
-051     \}
-052   
-053     err = MP_OKAY;
-054   LBL_T:mp_clear (&t);
-055     return err;
-056   \}
-057   #endif
-\end{alltt}
-\end{small}
-
-\subsection{The Miller-Rabin Test}
-The Miller-Rabin (citation) test is another primality test which has tighter error bounds than the Fermat test specifically with sequentially chosen 
-candidate  integers.  The algorithm is based on the observation that if $n - 1 = 2^kr$ and if $b^r \nequiv \pm 1$ then after upto $k - 1$ squarings the 
-value must be equal to $-1$.  The squarings are stopped as soon as $-1$ is observed.  If the value of $1$ is observed first it means that
-some value not congruent to $\pm 1$ when squared equals one which cannot occur if $n$ is prime.
-
-\begin{figure}[!here]
-\begin{small}
-\begin{center}
-\begin{tabular}{l}
-\hline Algorithm \textbf{mp\_prime\_miller\_rabin}. \\
-\textbf{Input}.   mp\_int $a$ and $b$, $a \ge 2$, $0 < b < a$.  \\
-\textbf{Output}.  $c = 1$ if $a$ is a Miller-Rabin prime to the base $a$, otherwise $c = 0$.  \\
-\hline
-1.  $a' \leftarrow a - 1$ \\
-2.  $r  \leftarrow n1$    \\
-3.  $c \leftarrow 0, s  \leftarrow 0$ \\
-4.  While $r.used > 0$ and $r_0 \equiv 0 \mbox{ (mod }2\mbox{)}$ \\
-\hspace{3mm}4.1  $s \leftarrow s + 1$ \\
-\hspace{3mm}4.2  $r \leftarrow \lfloor r / 2 \rfloor$ \\
-5.  $y \leftarrow b^r \mbox{ (mod }a\mbox{)}$ \\
-6.  If $y \nequiv \pm 1$ then \\
-\hspace{3mm}6.1  $j \leftarrow 1$ \\
-\hspace{3mm}6.2  While $j \le (s - 1)$ and $y \nequiv a'$ \\
-\hspace{6mm}6.2.1  $y \leftarrow y^2 \mbox{ (mod }a\mbox{)}$ \\
-\hspace{6mm}6.2.2  If $y = 1$ then goto step 8. \\
-\hspace{6mm}6.2.3  $j \leftarrow j + 1$ \\
-\hspace{3mm}6.3  If $y \nequiv a'$ goto step 8. \\
-7.  $c \leftarrow 1$\\
-8.  Return(\textit{MP\_OKAY}). \\
-\hline
-\end{tabular}
-\end{center}
-\end{small}
-\caption{Algorithm mp\_prime\_miller\_rabin}
-\end{figure}
-\textbf{Algorithm mp\_prime\_miller\_rabin.}
-This algorithm performs one trial round of the Miller-Rabin algorithm to the base $b$.  It will set $c = 1$ if the algorithm cannot determine
-if $b$ is composite or $c = 0$ if $b$ is provably composite.  The values of $s$ and $r$ are computed such that $a' = a - 1 = 2^sr$.  
-
-If the value $y \equiv b^r$ is congruent to $\pm 1$ then the algorithm cannot prove if $a$ is composite or not.  Otherwise, the algorithm will
-square $y$ upto $s - 1$ times stopping only when $y \equiv -1$.  If $y^2 \equiv 1$ and $y \nequiv \pm 1$ then the algorithm can report that $a$
-is provably composite.  If the algorithm performs $s - 1$ squarings and $y \nequiv -1$ then $a$ is provably composite.  If $a$ is not provably 
-composite then it is \textit{probably} prime.
-
-\vspace{+3mm}\begin{small}
-\hspace{-5.1mm}{\bf File}: bn\_mp\_prime\_miller\_rabin.c
-\vspace{-3mm}
-\begin{alltt}
-016   
-017   /* Miller-Rabin test of "a" to the base of "b" as described in 
-018    * HAC pp. 139 Algorithm 4.24
-019    *
-020    * Sets result to 0 if definitely composite or 1 if probably prime.
-021    * Randomly the chance of error is no more than 1/4 and often 
-022    * very much lower.
-023    */
-024   int mp_prime_miller_rabin (mp_int * a, mp_int * b, int *result)
-025   \{
-026     mp_int  n1, y, r;
-027     int     s, j, err;
-028   
-029     /* default */
-030     *result = MP_NO;
-031   
-032     /* ensure b > 1 */
-033     if (mp_cmp_d(b, 1) != MP_GT) \{
-034        return MP_VAL;
-035     \}     
-036   
-037     /* get n1 = a - 1 */
-038     if ((err = mp_init_copy (&n1, a)) != MP_OKAY) \{
-039       return err;
-040     \}
-041     if ((err = mp_sub_d (&n1, 1, &n1)) != MP_OKAY) \{
-042       goto LBL_N1;
-043     \}
-044   
-045     /* set 2**s * r = n1 */
-046     if ((err = mp_init_copy (&r, &n1)) != MP_OKAY) \{
-047       goto LBL_N1;
-048     \}
-049   
-050     /* count the number of least significant bits
-051      * which are zero
-052      */
-053     s = mp_cnt_lsb(&r);
-054   
-055     /* now divide n - 1 by 2**s */
-056     if ((err = mp_div_2d (&r, s, &r, NULL)) != MP_OKAY) \{
-057       goto LBL_R;
-058     \}
-059   
-060     /* compute y = b**r mod a */
-061     if ((err = mp_init (&y)) != MP_OKAY) \{
-062       goto LBL_R;
-063     \}
-064     if ((err = mp_exptmod (b, &r, a, &y)) != MP_OKAY) \{
-065       goto LBL_Y;
-066     \}
-067   
-068     /* if y != 1 and y != n1 do */
-069     if (mp_cmp_d (&y, 1) != MP_EQ && mp_cmp (&y, &n1) != MP_EQ) \{
-070       j = 1;
-071       /* while j <= s-1 and y != n1 */
-072       while ((j <= (s - 1)) && mp_cmp (&y, &n1) != MP_EQ) \{
-073         if ((err = mp_sqrmod (&y, a, &y)) != MP_OKAY) \{
-074            goto LBL_Y;
-075         \}
-076   
-077         /* if y == 1 then composite */
-078         if (mp_cmp_d (&y, 1) == MP_EQ) \{
-079            goto LBL_Y;
-080         \}
-081   
-082         ++j;
-083       \}
-084   
-085       /* if y != n1 then composite */
-086       if (mp_cmp (&y, &n1) != MP_EQ) \{
-087         goto LBL_Y;
-088       \}
-089     \}
-090   
-091     /* probably prime now */
-092     *result = MP_YES;
-093   LBL_Y:mp_clear (&y);
-094   LBL_R:mp_clear (&r);
-095   LBL_N1:mp_clear (&n1);
-096     return err;
-097   \}
-098   #endif
-\end{alltt}
-\end{small}
-
-
-
-
-\backmatter
-\appendix
-\begin{thebibliography}{ABCDEF}
-\bibitem[1]{TAOCPV2}
-Donald Knuth, \textit{The Art of Computer Programming}, Third Edition, Volume Two, Seminumerical Algorithms, Addison-Wesley, 1998
-
-\bibitem[2]{HAC}
-A. Menezes, P. van Oorschot, S. Vanstone, \textit{Handbook of Applied Cryptography}, CRC Press, 1996
-
-\bibitem[3]{ROSE}
-Michael Rosing, \textit{Implementing Elliptic Curve Cryptography}, Manning Publications, 1999
-
-\bibitem[4]{COMBA}
-Paul G. Comba, \textit{Exponentiation Cryptosystems on the IBM PC}. IBM Systems Journal 29(4): 526-538 (1990)
-
-\bibitem[5]{KARA}
-A. Karatsuba, Doklay Akad. Nauk SSSR 145 (1962), pp.293-294
-
-\bibitem[6]{KARAP}
-Andre Weimerskirch and Christof Paar, \textit{Generalizations of the Karatsuba Algorithm for Polynomial Multiplication}, Submitted to Design, Codes and Cryptography, March 2002
-
-\bibitem[7]{BARRETT}
-Paul Barrett, \textit{Implementing the Rivest Shamir and Adleman Public Key Encryption Algorithm on a Standard Digital Signal Processor}, Advances in Cryptology, Crypto '86, Springer-Verlag.
-
-\bibitem[8]{MONT}
-P.L.Montgomery. \textit{Modular multiplication without trial division}. Mathematics of Computation, 44(170):519-521, April 1985.
-
-\bibitem[9]{DRMET}
-Chae Hoon Lim and Pil Joong Lee, \textit{Generating Efficient Primes for Discrete Log Cryptosystems}, POSTECH Information Research Laboratories
-
-\bibitem[10]{MMB}
-J. Daemen and R. Govaerts and J. Vandewalle, \textit{Block ciphers based on Modular Arithmetic}, State and {P}rogress in the {R}esearch of {C}ryptography, 1993, pp. 80-89
-
-\bibitem[11]{RSAREF}
-R.L. Rivest, A. Shamir, L. Adleman, \textit{A Method for Obtaining Digital Signatures and Public-Key Cryptosystems}
-
-\bibitem[12]{DHREF}
-Whitfield Diffie, Martin E. Hellman, \textit{New Directions in Cryptography}, IEEE Transactions on Information Theory, 1976
-
-\bibitem[13]{IEEE}
-IEEE Standard for Binary Floating-Point Arithmetic (ANSI/IEEE Std 754-1985)
-
-\bibitem[14]{GMP}
-GNU Multiple Precision (GMP), \url{http://www.swox.com/gmp/}
-
-\bibitem[15]{MPI}
-Multiple Precision Integer Library (MPI), Michael Fromberger, \url{http://thayer.dartmouth.edu/~sting/mpi/}
-
-\bibitem[16]{OPENSSL}
-OpenSSL Cryptographic Toolkit, \url{http://openssl.org}
-
-\bibitem[17]{LIP}
-Large Integer Package, \url{http://home.hetnet.nl/~ecstr/LIP.zip}
-
-\bibitem[18]{ISOC}
-JTC1/SC22/WG14, ISO/IEC 9899:1999, ``A draft rationale for the C99 standard.''
-
-\bibitem[19]{JAVA}
-The Sun Java Website, \url{http://java.sun.com/}
-
-\end{thebibliography}
-
-\input{tommath.ind}
-
-\end{document}
--- a/options.h	Wed Mar 08 15:46:24 2006 +0000
+++ b/options.h	Thu Mar 09 12:37:38 2006 +0000
@@ -128,7 +128,7 @@
  * You can't enable both PASSWORD and PAM. */
 
 #define ENABLE_SVR_PASSWORD_AUTH
-/*#define ENABLE_SVR_PAM_AUTH*/
+/* #define ENABLE_SVR_PAM_AUTH */ /* requires ./configure --enable-pam */
 #define ENABLE_SVR_PUBKEY_AUTH
 
 #define ENABLE_CLI_PASSWORD_AUTH
--- a/svr-main.c	Wed Mar 08 15:46:24 2006 +0000
+++ b/svr-main.c	Thu Mar 09 12:37:38 2006 +0000
@@ -1,7 +1,7 @@
 /*
  * Dropbear - a SSH2 server
  * 
- * Copyright (c) 2002,2003 Matt Johnston
+ * Copyright (c) 2002-2006 Matt Johnston
  * All rights reserved.
  * 
  * Permission is hereby granted, free of charge, to any person obtaining a copy
@@ -48,8 +48,6 @@
 int main(int argc, char ** argv)
 #endif
 {
-	
-
 	_dropbear_exit = svr_dropbear_exit;
 	_dropbear_log = svr_dropbear_log;
 
@@ -139,7 +137,6 @@
 
 	commonsetup();
 
-
 	/* should be done after syslog is working */
 	if (svr_opts.forkbg) {
 		dropbear_log(LOG_INFO, "Running in background");
@@ -161,7 +158,6 @@
 	bzero(preauth_addrs, sizeof(preauth_addrs));
 	
 	/* Set up the listening sockets */
-	/* XXX XXX ports */
 	listensockcount = listensockets(listensocks, MAX_LISTEN_ADDR, &maxsock);
 	if (listensockcount == 0)
 	{