Mercurial > pihelp
annotate Makefile @ 33:a3de303afabf
Add compiled bootloader
| author | Matt Johnston <matt@ucc.asn.au> |
|---|---|
| date | Thu, 27 Jun 2013 11:46:44 +0800 |
| parents | bd9ce7e581ec |
| children | b210df11f968 |
| rev | line source |
|---|---|
| 0 | 1 # Name: Makefile |
| 2 # Author: <insert your name here> | |
| 3 # Copyright: <insert your copyright message here> | |
| 4 # License: <insert your license reference here> | |
| 5 | |
| 6 # This is a prototype Makefile. Modify it according to your needs. | |
| 7 # You should at least check the settings for | |
| 8 # DEVICE ....... The AVR device you compile for | |
| 20 | 9 # CLOCK ........ Target AVR CLOCK rate in Hertz |
| 0 | 10 # OBJECTS ...... The object files created from your source files. This list is |
| 11 # usually the same as the list of source files with suffix ".o". | |
| 12 # PROGRAMMER ... Options to avrdude which define the hardware you use for | |
| 13 # uploading to the AVR and the interface where this hardware | |
| 14 # is connected. We recommend that you leave it undefined and | |
| 15 # add settings like this to your ~/.avrduderc file: | |
| 16 # default_programmer = "stk500v2" | |
| 17 # default_serial = "avrdoper" | |
| 18 # FUSES ........ Parameters for avrdude to flash the fuses appropriately. | |
| 19 | |
|
19
5f9a40d6991b
Import SD handling from http://www.roland-riegel.de/sd-reader/index.html
Matt Johnston <matt@ucc.asn.au>
parents:
18
diff
changeset
|
20 DEVICE = atmega328p |
| 0 | 21 PROGDEVICE = atmega328p |
| 30 | 22 CLOCK = 11059200L |
| 0 | 23 PROGRAMMER = #-c stk500v2 -P avrdoper |
| 24 PROGRAMMER = -c stk500 -P ~/dev/stk500 -p $(PROGDEVICE) -B 2 | |
| 25 SOURCE_1WIRE = onewire.c simple_ds18b20.c crc8.c | |
| 5 | 26 SOURCE_CRYPTO = hmac-sha1.c sha1-asm.S aes.c |
| 32 | 27 SOURCE_SD = byteordering.c fat.c partition.c sd_raw.c |
| 0 | 28 SOURCE = main.c |
|
19
5f9a40d6991b
Import SD handling from http://www.roland-riegel.de/sd-reader/index.html
Matt Johnston <matt@ucc.asn.au>
parents:
18
diff
changeset
|
29 SOURCE += $(SOURCE_CRYPTO) $(SOURCE_SD) |
|
5f9a40d6991b
Import SD handling from http://www.roland-riegel.de/sd-reader/index.html
Matt Johnston <matt@ucc.asn.au>
parents:
18
diff
changeset
|
30 LIBS = |
| 33 | 31 BOOTLOADER_HEX = ATmegaBOOT_168_pihelp.hex |
|
19
5f9a40d6991b
Import SD handling from http://www.roland-riegel.de/sd-reader/index.html
Matt Johnston <matt@ucc.asn.au>
parents:
18
diff
changeset
|
32 |
|
5f9a40d6991b
Import SD handling from http://www.roland-riegel.de/sd-reader/index.html
Matt Johnston <matt@ucc.asn.au>
parents:
18
diff
changeset
|
33 OBJECTS := $(patsubst %.c,%.o,$(patsubst %.S,%.o,$(SOURCE))) |
| 0 | 34 |
| 35 # default but 2mhz | |
|
18
021e6e0006f4
debug printing, 5v adc, fixes
Matt Johnston <matt@ucc.asn.au>
parents:
17
diff
changeset
|
36 FUSES = -U hfuse:w:0xd9:m -U lfuse:w:0x77:m -U efuse:w:0xfd:m |
| 0 | 37 |
| 22 | 38 #LOCKBIT |
| 39 # -U lock:w:0x28:m | |
| 40 # 0 unused bit7 | |
| 41 # 0 unused | |
| 42 # 1 blb12 no writing to bootloader | |
| 43 # 0 blb11 | |
| 44 # 1 blb02 no writing to app | |
| 45 # 0 blb01 | |
| 46 # 0 lb2 | |
| 47 # 0 lb1 bit0 | |
| 48 | |
| 0 | 49 # ATMega8 fuse bits used above (fuse bits for other devices are different!): |
| 50 # Example for 8 MHz internal oscillator | |
| 51 # Fuse high byte: | |
| 52 # 0xd9 = 1 1 0 1 1 0 0 1 <-- BOOTRST (boot reset vector at 0x0000) | |
| 53 # ^ ^ ^ ^ ^ ^ ^------ BOOTSZ0 | |
| 54 # | | | | | +-------- BOOTSZ1 | |
| 55 # | | | | +---------- EESAVE (set to 0 to preserve EEPROM over chip erase) | |
| 56 # | | | +-------------- WDTON | |
| 57 # | | +---------------- SPIEN (if set to 1, serial programming is disabled) | |
| 58 # | +------------------ DWEN | |
| 59 # +-------------------- RSTDISBL (if set to 0, RESET pin is disabled) | |
| 60 # Fuse low byte: | |
|
18
021e6e0006f4
debug printing, 5v adc, fixes
Matt Johnston <matt@ucc.asn.au>
parents:
17
diff
changeset
|
61 # 0x77 0 1 1 1 0 1 1 1 (low rising, full swing, crystal) |
| 0 | 62 # 0x62 = 0 1 1 0 0 0 1 0 |
| 63 # ^ ^ \ / \--+--/ | |
| 64 # | | | +------- CKSEL 3..0 (8M internal RC) | |
| 65 # | | +--------------- SUT 1..0 (slowly rising power) | |
| 66 # | +------------------ CKOUT | |
|
18
021e6e0006f4
debug printing, 5v adc, fixes
Matt Johnston <matt@ucc.asn.au>
parents:
17
diff
changeset
|
67 # +-------------------- CLKDIV8 (initial) |
|
021e6e0006f4
debug printing, 5v adc, fixes
Matt Johnston <matt@ucc.asn.au>
parents:
17
diff
changeset
|
68 |
|
021e6e0006f4
debug printing, 5v adc, fixes
Matt Johnston <matt@ucc.asn.au>
parents:
17
diff
changeset
|
69 # Extended fuse: |
|
021e6e0006f4
debug printing, 5v adc, fixes
Matt Johnston <matt@ucc.asn.au>
parents:
17
diff
changeset
|
70 # 0xfd = 2.7V BOD |
|
021e6e0006f4
debug printing, 5v adc, fixes
Matt Johnston <matt@ucc.asn.au>
parents:
17
diff
changeset
|
71 # |
| 0 | 72 # |
| 73 # For computing fuse byte values for other devices and options see | |
| 74 # the fuse bit calculator at http://www.engbedded.com/fusecalc/ | |
| 75 | |
| 76 | |
| 77 # Tune the lines below only if you know what you are doing: | |
| 78 | |
|
19
5f9a40d6991b
Import SD handling from http://www.roland-riegel.de/sd-reader/index.html
Matt Johnston <matt@ucc.asn.au>
parents:
18
diff
changeset
|
79 SHELL := /bin/bash |
|
5f9a40d6991b
Import SD handling from http://www.roland-riegel.de/sd-reader/index.html
Matt Johnston <matt@ucc.asn.au>
parents:
18
diff
changeset
|
80 export PATH := $(PATH):/usr/local/CrossPack-AVR/bin/ |
|
5f9a40d6991b
Import SD handling from http://www.roland-riegel.de/sd-reader/index.html
Matt Johnston <matt@ucc.asn.au>
parents:
18
diff
changeset
|
81 |
| 0 | 82 AVRDUDE = avrdude $(PROGRAMMER) |
| 32 | 83 COMPILE = avr-gcc -Wall -Os -DF_CPU=$(CLOCK) -mmcu=$(DEVICE) -g -std=c99 -mcall-prologues -fdata-sections -ffunction-sections -Wl,--gc-sections -Wl,--relax -fwhole-program -flto |
| 0 | 84 |
| 85 # symbolic targets: | |
| 86 all: main.hex | |
| 87 | |
| 88 .c.o: | |
| 89 $(COMPILE) -c $< -o $@ | |
| 90 | |
| 91 .S.o: | |
| 92 $(COMPILE) -x assembler-with-cpp -c $< -o $@ | |
| 93 # "-x assembler-with-cpp" should not be necessary since this is the default | |
| 94 # file type for the .S (with capital S) extension. However, upper case | |
| 95 # characters are not always preserved on Windows. To ensure WinAVR | |
| 96 # compatibility define the file type manually. | |
| 97 | |
| 98 .c.s: | |
| 99 $(COMPILE) -S $< -o $@ | |
| 100 | |
| 101 flash: all | |
| 29 | 102 $(AVRDUDE) -U flash:w:main.hex:i |
| 0 | 103 |
| 33 | 104 combined.hex: main.hex $(BOOTLOADER_HEX) |
| 105 srec_cat main.hex -I $(BOOTLOADER_HEX) -I -o $@ -I | |
| 106 | |
| 107 combo: combined.hex | |
| 108 $(AVRDUDE) -U flash:w:combined.hex:i | |
| 109 | |
| 0 | 110 checkprog: |
| 111 $(AVRDUDE) -v | |
| 112 | |
| 113 fuse: | |
| 114 $(AVRDUDE) $(FUSES) | |
| 115 | |
| 116 # Xcode uses the Makefile targets "", "clean" and "install" | |
| 117 install: flash | |
| 118 | |
| 119 # if you use a bootloader, change the command below appropriately: | |
| 120 load: all | |
| 121 bootloadHID main.hex | |
| 122 | |
| 123 clean: | |
| 124 rm -f main.hex main.elf $(OBJECTS) | |
| 125 | |
| 126 # file targets: | |
| 127 main.elf: $(SOURCE) | |
| 128 $(COMPILE) -o main.elf $(SOURCE) $(LIBS) | |
| 129 | |
| 130 main.hex: main.elf | |
| 131 rm -f main.hex | |
| 132 avr-objcopy -j .text -j .data -O ihex main.elf main.hex | |
| 133 avr-size --format=avr --mcu=$(DEVICE) main.elf | |
| 134 # If you have an EEPROM section, you must also create a hex file for the | |
| 135 # EEPROM and add it to the "flash" target. | |
| 136 | |
| 137 # Targets for code debugging and analysis: | |
| 138 disasm: main.elf | |
| 139 avr-objdump -d main.elf | |
| 140 | |
| 141 cpp: | |
| 142 $(COMPILE) -E main.c |