--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/partition.h	Tue Jun 25 13:55:11 2013 +0800
@@ -0,0 +1,212 @@
+
+/*
+ * Copyright (c) 2006-2012 by Roland Riegel <[email protected]>
+ *
+ * This file is free software; you can redistribute it and/or modify
+ * it under the terms of either the GNU General Public License version 2
+ * or the GNU Lesser General Public License version 2.1, both as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef PARTITION_H
+#define PARTITION_H
+
+#include <stdint.h>
+#include "sd_raw_config.h"
+#include "partition_config.h"
+
+#ifdef __cplusplus
+extern "C"
+{
+#endif
+
+/**
+ * \addtogroup partition
+ *
+ * @{
+ */
+/**
+ * \file
+ * Partition table header (license: GPLv2 or LGPLv2.1)
+ *
+ * \author Roland Riegel
+ */
+
+/**
+ * The partition table entry is not used.
+ */
+#define PARTITION_TYPE_FREE 0x00
+/**
+ * The partition contains a FAT12 filesystem.
+ */
+#define PARTITION_TYPE_FAT12 0x01
+/**
+ * The partition contains a FAT16 filesystem with 32MB maximum.
+ */
+#define PARTITION_TYPE_FAT16_32MB 0x04
+/**
+ * The partition is an extended partition with its own partition table.
+ */
+#define PARTITION_TYPE_EXTENDED 0x05
+/**
+ * The partition contains a FAT16 filesystem.
+ */
+#define PARTITION_TYPE_FAT16 0x06
+/**
+ * The partition contains a FAT32 filesystem.
+ */
+#define PARTITION_TYPE_FAT32 0x0b
+/**
+ * The partition contains a FAT32 filesystem with LBA.
+ */
+#define PARTITION_TYPE_FAT32_LBA 0x0c
+/**
+ * The partition contains a FAT16 filesystem with LBA.
+ */
+#define PARTITION_TYPE_FAT16_LBA 0x0e
+/**
+ * The partition is an extended partition with LBA.
+ */
+#define PARTITION_TYPE_EXTENDED_LBA 0x0f
+/**
+ * The partition has an unknown type.
+ */
+#define PARTITION_TYPE_UNKNOWN 0xff
+
+/**
+ * A function pointer used to read from the partition.
+ *
+ * \param[in] offset The offset on the device where to start reading.
+ * \param[out] buffer The buffer into which to place the data.
+ * \param[in] length The count of bytes to read.
+ */
+typedef uint8_t (*device_read_t)(offset_t offset, uint8_t* buffer, uintptr_t length);
+/**
+ * A function pointer passed to a \c device_read_interval_t.
+ *
+ * \param[in] buffer The buffer which contains the data just read.
+ * \param[in] offset The offset from which the data in \c buffer was read.
+ * \param[in] p An opaque pointer.
+ * \see device_read_interval_t
+ */
+typedef uint8_t (*device_read_callback_t)(uint8_t* buffer, offset_t offset, void* p);
+/**
+ * A function pointer used to continuously read units of \c interval bytes
+ * and call a callback function.
+ *
+ * This function starts reading at the specified offset. Every \c interval bytes,
+ * it calls the callback function with the associated data buffer.
+ *
+ * By returning zero, the callback may stop reading.
+ *
+ * \param[in] offset Offset from which to start reading.
+ * \param[in] buffer Pointer to a buffer which is at least interval bytes in size.
+ * \param[in] interval Number of bytes to read before calling the callback function.
+ * \param[in] length Number of bytes to read altogether.
+ * \param[in] callback The function to call every interval bytes.
+ * \param[in] p An opaque pointer directly passed to the callback function.
+ * \returns 0 on failure, 1 on success
+ * \see device_read_t
+ */
+typedef uint8_t (*device_read_interval_t)(offset_t offset, uint8_t* buffer, uintptr_t interval, uintptr_t length, device_read_callback_t callback, void* p);
+/**
+ * A function pointer used to write to the partition.
+ *
+ * \param[in] offset The offset on the device where to start writing.
+ * \param[in] buffer The buffer which to write.
+ * \param[in] length The count of bytes to write.
+ */
+typedef uint8_t (*device_write_t)(offset_t offset, const uint8_t* buffer, uintptr_t length);
+/**
+ * A function pointer passed to a \c device_write_interval_t.
+ *
+ * \param[in] buffer The buffer which receives the data to write.
+ * \param[in] offset The offset to which the data in \c buffer will be written.
+ * \param[in] p An opaque pointer.
+ * \returns The number of bytes put into \c buffer
+ * \see device_write_interval_t
+ */
+typedef uintptr_t (*device_write_callback_t)(uint8_t* buffer, offset_t offset, void* p);
+/**
+ * A function pointer used to continuously write a data stream obtained from
+ * a callback function.
+ *
+ * This function starts writing at the specified offset. To obtain the
+ * next bytes to write, it calls the callback function. The callback fills the
+ * provided data buffer and returns the number of bytes it has put into the buffer.
+ *
+ * By returning zero, the callback may stop writing.
+ *
+ * \param[in] offset Offset where to start writing.
+ * \param[in] buffer Pointer to a buffer which is used for the callback function.
+ * \param[in] length Number of bytes to write in total. May be zero for endless writes.
+ * \param[in] callback The function used to obtain the bytes to write.
+ * \param[in] p An opaque pointer directly passed to the callback function.
+ * \returns 0 on failure, 1 on success
+ * \see device_write_t
+ */
+typedef uint8_t (*device_write_interval_t)(offset_t offset, uint8_t* buffer, uintptr_t length, device_write_callback_t callback, void* p);
+
+/**
+ * Describes a partition.
+ */
+struct partition_struct
+{
+    /**
+     * The function which reads data from the partition.
+     *
+     * \note The offset given to this function is relative to the whole disk,
+     *       not to the start of the partition.
+     */
+    device_read_t device_read;
+    /**
+     * The function which repeatedly reads a constant amount of data from the partition.
+     *
+     * \note The offset given to this function is relative to the whole disk,
+     *       not to the start of the partition.
+     */
+    device_read_interval_t device_read_interval;
+    /**
+     * The function which writes data to the partition.
+     *
+     * \note The offset given to this function is relative to the whole disk,
+     *       not to the start of the partition.
+     */
+    device_write_t device_write;
+    /**
+     * The function which repeatedly writes data to the partition.
+     *
+     * \note The offset given to this function is relative to the whole disk,
+     *       not to the start of the partition.
+     */
+    device_write_interval_t device_write_interval;
+
+    /**
+     * The type of the partition.
+     *
+     * Compare this value to the PARTITION_TYPE_* constants.
+     */
+    uint8_t type;
+    /**
+     * The offset in blocks on the disk where this partition starts.
+     */
+    uint32_t offset;
+    /**
+     * The length in blocks of this partition.
+     */
+    uint32_t length;
+};
+
+struct partition_struct* partition_open(device_read_t device_read, device_read_interval_t device_read_interval, device_write_t device_write, device_write_interval_t device_write_interval, int8_t index);
+uint8_t partition_close(struct partition_struct* partition);
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
+